Related
I've read previous threads that instruct to search for rom.zip in the temp folder. I have found the rom.zip but it does not flash using CWM. How do I get the rom which I can flash through CWM?
You don't flash it through cwm, you rename it accordingly (PHxxIMG.zip) based on your phone model and flash it through HBOOT.
Sent from my ADR6425LVW using XDA
hellhawk741 said:
You don't flash it through cwm, you rename it accordingly (PHxxIMG.zip) based on your phone model and flash it through HBOOT.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Okay. I do recall my phone searching for similarly named images when I booted the phone to recovery. How exactly am I supposed to flash them after renaming and placing them in the root of my SD Card?
Also, do normal regional restrictions still apply to this process? (Will it bail if I try flashing the phxximg.zip of a European RUU on a asian phone?)
Thanks a lot.
Don't know about the regional restrictions. To flash it you just put the renamed zip in the root of your SD card and reboot into bootloader. It'll scan for the file and ask you to press some key if you want to flash the update. That's it.
Sent from my Desire HD using xda premium
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
PoorCollegeGuy said:
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
Click to expand...
Click to collapse
Exactly, just got an incorrect CID error. I'm trying to do this on HTC One V. The bootloader is unlocked. Can you please link me to the SuperCID for HTC one V? Is it software or hardware?
Also for this process, do I need to have stock recovery or having CWM won't cause any issue?
Moreover, is it okay if the bootloader is unlocked or do I "relock" it?
PoorCollegeGuy said:
Regional restrictions apply unless you have changed your CID to allow for flashing of other regions ROMs. This is called "SuperCID". I'm not sure which HTC phone you have otherwise I'd link you to how to get it on your phone, but it's a simple google search "SuperCID *phone name*"
When you have SuperCID, it allows the flashing of any ROM by any carrier so if you intend on doing an Asian ROM on a Euro phone, check and make sure the hardware is the same, otherwise you'll bork something.
Example: if you flashed a CDMA EVO 3D ROM on a GSM EVO 3D, you'd likely lose your data, signal at least, given that the CDMA and GSM 3D's have different radios. You'd probably lose even more but the data and signal at least are for sure.
Click to expand...
Click to collapse
Can you please post me the link to the SuperCID for HTC One V. Googling didn't help much.
Another very important question, my stock ROM was an Indian one. I rooted and flashed a stock European ROM. Due to this process, do you think the original CID was modified?
abhishek_turbo911 said:
Exactly, just got an incorrect CID error. I'm trying to do this on HTC One V. The bootloader is unlocked. Can you please link me to the SuperCID for HTC one V? Is it software or hardware?
Also for this process, do I need to have stock recovery or having CWM won't cause any issue?
Moreover, is it okay if the bootloader is unlocked or do I "relock" it?
Click to expand...
Click to collapse
You'll most likely need to re-lock before flashing the RUU. I haven't heard of a way to get super-cid on the One V yet, but if it's possible you should be able to find it in the HTC One V forums.
The day I got my Canadian One S, I had an HTC upgrade waiting to be applied...
I was soooooo stupid to apply that, which made me Hboot 1.13 and radio 0.17...
I have rooted and s-off and all other necessary to install JB...
All went nice... I got ParanoidAndroid ROM(thanks guys, very nice job seriously) running smoothly...
However, after several days I've noticed that many people have been complaining that they can't reach me...
I've activated the operator's missed call SMS function and the result was shocking...
I was missing 70% of the calls each day... I started to track the status of the device then...
This is what I've discovered:
Network is constantly switching between 3G, H and H+...
Even if there's H on the screen, sometimes there's no connection actually.
While searching for the probable root cause of the problem, I've installed seven different ROMs, including Android 4.0.4 and 4.1.
The problem remains, so I assume ParanoidAndroid ROM works fine. I have a different problem.
I kept searching and found out that many people have similar problems but I failed to find an exact solution.
One of the articles says that it may be the radio version, which makes sense to me.
Now I'm trying to downgrade the phone since three days.
The RUU I've been trying is:
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
because I was thinking that GSM network is GSM network and so EU RUU shall work.
But the error I get is Model ID Error, coded 130; which actually tells me that I'm being stupid again because I'm using a wrong RUU.
Now, I'm very tired(really, physically tired, I don't mean that I'm bored) so I need some sleep...
Is there any guru here who may help me? What RUU is correct for my Canadian One S? I got it from Fido in Toronto but because of my work, I'm using it in Asia, in Kazakhstan.
Cheers... :silly:
erol.savas said:
The day I got my Canadian One S, I had an HTC upgrade waiting to be applied...
I was soooooo stupid to apply that, which made me Hboot 1.13 and radio 0.17...
I have rooted and s-off and all other necessary to install JB...
All went nice... I got ParanoidAndroid ROM(thanks guys, very nice job seriously) running smoothly...
However, after several days I've noticed that many people have been complaining that they can't reach me...
I've activated the operator's missed call SMS function and the result was shocking...
I was missing 70% of the calls each day... I started to track the status of the device then...
This is what I've discovered:
Network is constantly switching between 3G, H and H+...
Even if there's H on the screen, sometimes there's no connection actually.
While searching for the probable root cause of the problem, I've installed seven different ROMs, including Android 4.0.4 and 4.1.
The problem remains, so I assume ParanoidAndroid ROM works fine. I have a different problem.
I kept searching and found out that many people have similar problems but I failed to find an exact solution.
One of the articles says that it may be the radio version, which makes sense to me.
Now I'm trying to downgrade the phone since three days.
The RUU I've been trying is:
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
because I was thinking that GSM network is GSM network and so EU RUU shall work.
But the error I get is Model ID Error, coded 130; which actually tells me that I'm being stupid again because I'm using a wrong RUU.
Now, I'm very tired(really, physically tired, I don't mean that I'm bored) so I need some sleep...
Is there any guru here who may help me? What RUU is correct for my Canadian One S? I got it from Fido in Toronto but because of my work, I'm using it in Asia, in Kazakhstan.
Cheers... :silly:
Click to expand...
Click to collapse
You can change your carrier ID so you can pass the model check when using any RUU by follow the instructions at the link below. If you do change your carrier ID then you'll need to unlock your bootloader though htcdev.com after you run a RUU.
http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
Also, after you change to super cid keep in mind you can only run RUU's which contain the same hboot version you are currently running or a higher version. In your case hboot 1.13 or hboot 1.14.
Thanks a lot but...
dc211 said:
You can change your carrier ID so you can pass the model check when using any RUU by follow the instructions at the link below. If you do change your carrier ID then you'll need to unlock your bootloader though htcdev.com after you run a RUU.
http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
Also, after you change to super cid keep in mind you can only run RUU's which contain the same hboot version you are currently running or a higher version. In your case hboot 1.13 or hboot 1.14.
Click to expand...
Click to collapse
Thanks a lot.
In fact I read the CID change method but most probably because of late-night-sleepy mood, I've considered the method as brand and model specific thing. After five hours sleep, I see that it is not...
I've performed all the steps and I've succeeded to install this RUU:
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
As you have mentioned about hboot, the RUU didn't downgrade my hboot from 1.13 but it did downgrade the radio from 0.17 to 0.16. and OpenDSP from v28 to v25.
I've performed all rooting and installed CWM recovery and I've restored the backup.
I got JB back without any hassle.
However, the 3G, h and H+ switching problem still remains, which actually made me look for a solution for RUU installation.
So radio downgrade didn't help...
It's very annoying to see the network constantly switching... And I have reasons to believe that this switching is draining the battery.
Would you have any suggestions on that particular issue?
(I don't know if this is important but I since the problem is still remaining, let me mention anyway...
The geniuses in Fido, even after asking about it for three times, gave me an operator locked phone...
So when I arrived here and have inserted the KZ operator SIM, the phone got locked.
I unlocked it myself...)
Cheers
How did you S-OFF?
Sent from my locked, tampered ville
erol.savas said:
Thanks a lot.
In fact I read the CID change method but most probably because of late-night-sleepy mood, I've considered the method as brand and model specific thing. After five hours sleep, I see that it is not...
I've performed all the steps and I've succeeded to install this RUU:
RUU_Ville_U_HTC_Europe_1.78.401.2_Radio_0.16.31501S.17_2_10.23.31501S.10L_release_258480_signed
As you have mentioned about hboot, the RUU didn't downgrade my hboot from 1.13 but it did downgrade the radio from 0.17 to 0.16. and OpenDSP from v28 to v25.
I've performed all rooting and installed CWM recovery and I've restored the backup.
I got JB back without any hassle.
However, the 3G, h and H+ switching problem still remains, which actually made me look for a solution for RUU installation.
So radio downgrade didn't help...
It's very annoying to see the network constantly switching... And I have reasons to believe that this switching is draining the battery.
Would you have any suggestions on that particular issue?
(I don't know if this is important but I since the problem is still remaining, let me mention anyway...
The geniuses in Fido, even after asking about it for three times, gave me an operator locked phone...
So when I arrived here and have inserted the KZ operator SIM, the phone got locked.
I unlocked it myself...)
Cheers
Click to expand...
Click to collapse
Glad it worked. For the network switching I think that's fast dormancy doing it's thing but your carrier has to support it. To disable it add these lines to your build.prop file.
ro.ril.fast.dormancy.rule=0
ro.ril.disable.power.collapse=1
or if those already exist change them to match above and see if that fixes it.
I'm sorry
usaff22 said:
How did you S-OFF?
Sent from my locked, tampered ville
Click to expand...
Click to collapse
I'm very sorry to alarm you; my mistake...
I have been very exhausted last night... I've mistyped few but very critical things, such as s-off.
Within my technical limits ans skills, of course no s-off...
I've corrected my signature.
Sorry again...
Cheers
Now, let me track the status
dc211 said:
Glad it worked. For the network switching I think that's fast dormancy doing it's thing but your carrier has to support it. To disable it add these lines to your build.prop file.
ro.ril.fast.dormancy.rule=0
ro.ril.disable.power.collapse=1
or if those already exist change them to match above and see if that fixes it.
Click to expand...
Click to collapse
Thanks mate.
I've added the two lines to build.prop
Even though the switching still is going on, I suspect that it is quite less dynamic than before.
Today, I'll be watching the status of data and the missed call SMS' from the operator.
I'll of course let you know the outcome tomorrow.
Cheers :good:
erol.savas said:
Thanks mate.
I've added the two lines to build.prop
Even though the switching still is going on, I suspect that it is quite less dynamic than before.
Today, I'll be watching the status of data and the missed call SMS' from the operator.
I'll of course let you know the outcome tomorrow.
Cheers :good:
Click to expand...
Click to collapse
Don't forget you gotta reboot for it to take effect.
dc211 said:
Don't forget you gotta reboot for it to take effect.
Click to expand...
Click to collapse
Yes, sure.
I've rebooted after adding those two lines.
So far it's better...
dc211 said:
Don't forget you gotta reboot for it to take effect.
Click to expand...
Click to collapse
OK, here I am...
The problem is still going on...
However... I found out something very interesting...
Yesterday I felt very upset and disappointed with the One S and bough myself a new One X...
I didn't install any HTC updates, etc... I unlocked the bootloader and installed CWM recovery...
Put my favorite ROM, the latest version of ParanoidAndroid...
Inserted the SIM card... Guess what?.. Same thing... Switching between 3G, H, H+ !...
You can't imagine how surprised and shocked I was. I started to consider burning both phones in my back yard.
But before buying some alcohol for easier burn, I've decided to check the issue with another SIM card. :cyclops:
So I've asked from one of my friends having micro-SIM to give me his SIM for 5 mins to test...
While explaining him the problem on his One X, I saw that -with another operator SIM card- his One X is in the same situation...
His One X is pure factory default, no bootloader mods, no recoveries, no custom ROM, etc...
Since he keeps the data off all the time but uses only wifi, the guy had never noticed the issue.
So I'm shocked for two times in 20 hours
Now what?.. The networks of all operators in Kazakhstan have some kind of a problem?
Or is this really a problem?...
Four days ago I was using the same operator network with my good-old HTC Desire and I haven't witnessed such issues with that one, neither with the two EVO 3Ds I have, nor with the Motorola Xoom. By the way, they're still fine... No switching issues so far...
What may the difference be between these old models and the new series?
Problematic new radio hardware or firmware HTC uses in the One series?
If this was only a switching issue, I might think that it may not be a problem actually but the phone still is dropping from the GSM network and I still receive missed call SMS from the operator...
Delays in sending SMS, etc...
What the heck is going on here?
Cheers
Should this method always work?
dc211 said:
You can change your carrier ID so you can pass the model check when using any RUU by follow the instructions at the link below. If you do change your carrier ID then you'll need to unlock your bootloader though htcdev.com after you run a RUU.
http://forum.xda-developers.com/showthread.php?p=26516911#post26516911
Also, after you change to super cid keep in mind you can only run RUU's which contain the same hboot version you are currently running or a higher version. In your case hboot 1.13 or hboot 1.14.
Click to expand...
Click to collapse
Hi, I'm not able to run the RUU with this method (130 - Model ID Error). CID is 11111111, phone (One S) is unlocked by htcdev.com. The mid is PJ4020000 and I didn't find any way to change the it (fastboot oem writemid PJ4010000 doesn't work). Hboot version is 2.09. I tried to install both RUU_Ville_U_HTC_Europe_1.78.401.2 and RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5. Can anybody help me, please?
Problem because of S3 processor
jkniep said:
Hi, I'm not able to run the RUU with this method (130 - Model ID Error). CID is 11111111, phone (One S) is unlocked by htcdev.com. The mid is PJ4020000 and I didn't find any way to change the it (fastboot oem writemid PJ4010000 doesn't work). Hboot version is 2.09. I tried to install both RUU_Ville_U_HTC_Europe_1.78.401.2 and RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5. Can anybody help me, please?
Click to expand...
Click to collapse
Nevermind, I just found out that I couldn't update because I have the S3 version (which, of course, nobody at the store told me) and therefore need another RUU.
usaff22 said:
How did you S-OFF?
Sent from my locked, tampered ville
Click to expand...
Click to collapse
+1! Lol
HTC One S
Hi, guys.
I'm using a HOX AT&T with stock rom 1.85, and yes I did the deed, root, spoof CID and unlock bootloader, install TWRecovery. Now I live in Asia so no LTE here, and I don't like the ATT's bloatware at all, also I read some complaints about LTE radio constantly drains battery if not in coverage. Some flashing is in order, but before diving in I have some questions:
1./ Is the spoofed CID permanent? I mean now my HOX is 11111111 CID - like a retail/generic one's, what will happen if I flash a RUU from another operator? Does a RUU from AT&T make my phone's CID go back to before and I need to start the whole nine yards again?
2./ I understood flashing a stock rom will un-root the phone okay, but what about bootloader? A RUU flashing wont re-lock the bootloader, or will it?
3./ Like I said, I can't stand bloatware, in the roms section I saw this RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed and a newer RUU 2.29 Asia somewhere else, are those unbrand roms - like the ones come with retail/operator-free One XL?
4./ I saw warnings about this specific rom, 2.20 of AT&T, no root, new hboot... all basically spells trouble, but what about branded roms with higher version number like O2 DE 2.29 or Vodafone DE 2.33, are they kosher?
5./ AFAIK, Europe and Asia has no LTE capability, so if I flash a radio rom from European operators or Asia does it disable the LTE radio in my AT&T HOX?
That's all, thank you guys in advance.
6./ In the thread radio & RIL , I read that update 2.2x will replace HBOOT and make old radio not compatible, is it because new HBOOT resize the radio partition smaller? So if I flash a custom rom based on Asia RUU 2.29 for example (not the dreaded 2.20 ATT), my current HBOOT will be replaced by new HBOOT as well? With no S-OFF, we can not flash HBOOT so will I be stuck with the new HBOOT and therefore, new radio roms only?
Looking forward to hearing from HOXL gurus. Thanks.
linhldz said:
Hi, guys.
I'm using a HOX AT&T with stock rom 1.85, and yes I did the deed, root, spoof CID and unlock bootloader, install TWRecovery. Now I live in Asia so no LTE here, and I don't like the ATT's bloatware at all, also I read some complaints about LTE radio constantly drains battery if not in coverage. Some flashing is in order, but before diving in I have some questions:
1./ Is the spoofed CID permanent? I mean now my HOX is 11111111 CID - like a retail/generic one's, what will happen if I flash a RUU from another operator? Does a RUU from AT&T make my phone's CID go back to before and I need to start the whole nine yards again?
2./ I understood flashing a stock rom will un-root the phone okay, but what about bootloader? A RUU flashing wont re-lock the bootloader, or will it?
3./ Like I said, I can't stand bloatware, in the roms section I saw this RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed and a newer RUU 2.29 Asia somewhere else, are those unbrand roms - like the ones come with retail/operator-free One XL?
4./ I saw warnings about this specific rom, 2.20 of AT&T, no root, new hboot... all basically spells trouble, but what about branded roms with higher version number like O2 DE 2.29 or Vodafone DE 2.33, are they kosher?
5./ AFAIK, Europe and Asia has no LTE capability, so if I flash a radio rom from European operators or Asia does it disable the LTE radio in my AT&T HOX?
That's all, thank you guys in advance.
Click to expand...
Click to collapse
1. Spoofed CID is permanent unless you go in and change it back. For all intents and purposes, it's permanent.
2. Actually to run an RUU, you must relock your bootloader or it will fail. As long as you have your unlock token or Super CID, you can re-unlocked your bootloader once you are done and flash SuperSU to get root back. Or just flash a pre-rooted stock ROM.
3. Not sure. Make sure to fully read the post. I have never run an RUU for a phone with an RUU from a different carrier. Again, make sure you read about that one.
4. You just don't want to run the 2.20 RUU for AT&T. It will make it so you can not flash radios at all and you must flash boot.img from adb or from Android terminal emulator. It is just the 2.20 RUU that will do this. A custom ROM will not, so no need to worry.
5. It will not disable LTE, but if you don't have an LTE APN in your phone it shouldn't be looking for LTE and you can also turn off the LTE radios on any non-AT&T ROM.
My recommendation after all of your questions would be to flash a pre-rooted stock ROM or a cleaned up debranded ROM (like Clean Rom, but there are more out there). Change the APN to what ever country you are in and do the *#*#4636#*#* thing to turn off your LTE radio. Again, the *#*#4634#*#* to turn off the radio will not work on a stock AT&T ROM.
Thank you, Butters. Still I've got one more question - added in the first post.
linhldz said:
Thank you, Butters. Still I've got one more question - added in the first post.
Click to expand...
Click to collapse
If you are flashing a custom ROM, you do not have to worry about your HBOOT being changed. It doesn't matter what the custom ROM is based on. You only have to worry about that with running an RUU (which is from HTC for a specific carrier).
If you have 1.85 on your phone, just keep a 1.85 RUU on your computer and flash away any ROM you want. If something gets messed up and you need to RUU, you'll always have that 1.85 RUU with the old hboot.
Running the 2.20 RUU, you will lose all ability to flash any radios, so you will be stuck with the AT&T 2.20 radio. Being that you are overseas, I would not recommend this because it may not (probably isn't) the best radio for your use case.
If you want a stock ROM, there are pre-rooted versions posted in Development that are flashable from TWRP. Easier then relocking the bootloader and running the RUU, and no threat of hboot changes (or having to research what was changed in the hboot).
Or just install a custom ROM. They are often based on recent firmware versions, but already de-bloated, and with awesome customizations added.
After all, if you want to run a stock RUU, why did you unlock the bootloader in the first place?
Thank guys, really appreciate. Just flashed CR5 with confidence, so far so good.
Early assessment: Quite smooth, the LTE problem with AT&T stock rom has disappeared, battery life improves greatly.
I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.
tykidd66 said:
I have a rooted S One that seems to have lost its root access and signal after OTA update from Bell - the phone was bought on eBay as an "unlocked sealed" item, which wasn't the case. I want to restore the phone to stock and SIM unlock it for use with Telus, but there's no 1.84 RUU for Rogers available. I just want to confirm I can't restore the phone to stock without the 1.84 RUU. Or, if there's an alternative to get it working again, what that alternative might be and where to start. Thanks for any help.
Click to expand...
Click to collapse
Post is a bit confusing. You talk about Bell, Rogers, and Telus all at once. Also, if you got an OTA update from Bell, you will only be able to execute an RUU that has an hboot version equal to or higher than your current one.
If you are looking for a more recent RUU than the ones posted on http://forum.xda-developers.com/showthread.php?t=1543588
then I suggest you send a private message to Football, the user who started that post. He helped me find newer Bell Mobility RUUs (which have since been posted to the thread).
Your other option is to do a bootloader downgrade (see the dev post on this, its a bit complicated), and then you can flash other radios from http://forum.xda-developers.com/showthread.php?t=1998270
If you dont want to downgrade your bootloader, you can always flash to a CM10 base (AOSP type) ROM, such as PAC Man, or Jelly Bam, etc. Then you can flash radios without having to downgrade.
Again, though this is all assuming that your true problem is with you baseband radio and now switching carriers has made your reception poor...
Also remember you will have to relock your bootloader before you execute an RUU, otherwise it wont take (that and a correct bootloader version)
AKToronto
Thanks for the info. The phone is a sim-unlocked Fido unit. It was running on Bell before the OTA update.
Here are the specs:
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Is the "build number" the RUU? I'll try Football, but do I need the Rogers (Fido) RUU?
Thanks.
you can not execute an rogers ruu on a bell phone, the cid wont match
there is an app on play who will display you the cid and the original network; like that you'll know exactly what phone do you have in hand
you just have to unlockit after and you will be able to useit in whatever network you want
Thanks. Ran CID getter and says it's ROGER001. So I've confirmed that I need a Rogers file. And I would like to unlock it, but from what I've read I cannot restore back to Rogers 1.70 because the unit has been updated to 1.84. I have read that if I can find a 1.84 Rogers file, I can use that to restore the unit. This is the next thing I need to confirm. I appreciate your help.
I think that is almost correct. You can change the CID to the Rogers one using the same technique as posted in the super Cid thread in the development section. Normally though you can't flash an older ruu as the hboot version can't be older. But You may also want to try posting a message in the bootloader downgrade thread that is stickied to n the development section. I think if you downgrade your bootloader and also do a minor hex edit to a partition you can flash an older RUU. I have downgraded my bootloader but haven't tried flashing an older ruu so I can't say for sure.
Sent from my HTC One S using xda premium
Thanks again. So I can assume the CID is already Rogers, yes? I don't want to change it. My hope is that I can use the All in One Toolkit (one of the sticky posts) to bring the phone back to stock and then SIM unlock it for use with Telus. If I run the Toolkit, and use cbetso's instructions from the "How to Return to Stock" post (after adding the stock recovery to the folder). If I locate the Rogers 1.84 RUU, can I run it without downgrading?
don't assume, your cid is rogers ROGER001, so there is absolutely no way your phone could download and execute an update from bell.
so I can not understand what has bell to do in this.
if you just want to use it on telus network, you just have to unlock it, you don't even need root for this. and the phone will work just fine.
the root is needed when you want to change ROM, radio, debloat and others.
one of the others will be tweaking the build.prop file to achieve maximum capacities of your 3g/4g desired network
Thanks - it's a difficult story to tell, really. It was a Rogers unit, SIM unlocked to work with Bell. It was on Bell's network for two months, and an OTA update caused major radio and reception problems. It will not keep a network signal anymore. I have tried other SIMs in the unit and it will not recognize them, nor start up with the "Enter Unlock Code" screen to SIM unlock it. It's my understanding that I need to return it to stock by finding the Rogers RUU file that matches the software version on the unit, which is 1.84. This is my very limited understanding of the issue, but it's what I've been able to figure out.
if it was a rogers device, and you did not change the CID, you get the ROGER001 cid with the app, your phone is still a rogers device
doesn't matter in which networks was used, for the two months before you get it, and by you after
as long the cid stays ROGER001, your phone will remain a rogers device, unlocked to be used in different networks.
so there is absolutely no way an OTA update, from bell or telus could be the source of your problems, because your phone will not download or execute an ota update from other networks
same for rogers ota update, as long the phone was unlocked, will not execute OTA updates, even the updates will be downloaded on the phone
your connection problem came from other reasons;
however it you want to return the phone to rogers stock, the key number is HBOOT version;
you can execute any RUU with HBOOT version higher or equal with your present version on the phone
if somehow you're on a very high version and you can not find the appropriate RUU, we can always downgrade RUU, check development section for tutorial
it's not very simple, but as long you're ok and you understand the steps, go for it, it is doable.
if you have root, you might try different radios before all above, or maybe a custom rom; just an ideea; as long the phone is not soft bricked or physically damaged, there is no reason a custom rom will not work
Thanks for the information. There seems to be other problems with the unit, including it won't delete all data after hard reset, it won't recognize other networks when other SIMs are put in, it has been upgraded past the 1.70 stock Rogers RUU. I wish I could get it figured out or I may have to sell it as is. Appreciate your help.
factory reset in fastboot didn't work?
means you're on some custom rom with non stock recovery?
have you tried to flash a stock recovery? any of them, whatever you'll find around here; there are no much difference in term of facilities between them;
then you should be able to restore phone to factory defaults
try find somewhere All in one kitt one S v1.0; there is stock recovery in it, and flashing is easy
in v1.1 there is no more stock recovery
donwload ruu or open up ruu..when it first starts go into your windows manager and in the link section delete what you have in that section like c:/program files and replace it with %temp% and it will find two encrypted folders with a big letter/digit name and they will show you what time they were opened . open them up and find rom.zip copy it to your desktop and then extract it somewhere safe .. in the folders in rom.zip you will see recovery_signed.img rename it recovery.img and flash it via hasoons tool kit provided in the development section..just in case you ever run into this again
Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.
tykidd66 said:
Thanks. Can I flash a stock recovery in the All in One Toolkit without having the proper RUU version I need? Will this allow me to factory reset the phone, and the radio issue is another unrelated problem? The unit is supposed to be SIM unlocked, but when I put another carrier's SIM in, I still have no radio and I do not see the screen that says "unrecognized SIM" with an "enter unlock code" option.
Click to expand...
Click to collapse
Not sure about your radio issue, that would require testing out different radios. You can do that on a higher hboot by trying AOSP ROMS and using the Radio flasher in the dev forums.
As for flashing stock recovery you can also just use the following link: http://loadbalancing.modaco.com/down...ery_signed.img
The stock recovery doesnt really change from RUU to RUU. You dont need a particular recovery to use a particular RUU, as far as I know.
Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?
tykidd66 said:
Thanks - you wanna take another look at that link? It didn't seem to be anything. Or do I need to change the extension?
Click to expand...
Click to collapse
http://loadbalancing.modaco.com/download.php?file=ville_recovery_signed.img
Try that. Sorry about the other link
I maybe miss it, but you never said what is the exact status of the phone right now;
it is booting? it is working on some network? at least partially like voice only? what ROM are you on? what HBOOT?
Hi there - thanks for getting back to me and asking. The phone seems to be booting normally and always has been. It is not able to recognize any new SIM card. It's a Rogers unit, and when I add my Telus SIM it does not go to the "Unrecognized SIM" screen, it actually registers the TELUS network for a moment, then the radio gives no signal.
How can I check the ROM, 'cause I have no idea. Is the HBOOT in these specs?
Android version: 4.0.3
HTC Sense version: 4.0
Software number: 1.84.631.9
HTC SDK API level: 4.11
HTC Extension version: HTCExtension_403_1_GA_4
Build number: 1.84.631.9 CL64348 release-keys
Thanks again.
for the Hboot version you have to reboot in fastboot
for recovery reboot into recovery
for the ROM version, once booted normaly you have to go into about phone > software
are you sure you have the right settings for Telus APN? for some reasons, the phone will not registered to network, if apn setting are wrong;
at least for me, which I'm opposite to you as I have a telus phone and using it in fido network, if I dont have Fido APN setted up, the phone does not register to network
Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium
tlazarus said:
Before anyone tries to flame me, I've read all of the recent ICS and JB rom threads, as well as most of the generic question threads. I've unlocked, rooted, and flashed several roms before settling on CleanROM so I am not a complete noob. The master q&a thread doesn't cover RUUs much, and people aren't that interested in applying non rootable RUUs, so info on going back to stock on a newer or even older RUU doesn't seem to be widely available. My biggest concern is bricking my phone or losing major functionality, as some people using asian based roms seem to be having reboot and/or wifi issues.
1. Applying a different carriers S4 JB RUU is perfectly safe as long as I relock the boot loader, even with Super-CID.
I've seen conflicting reports of issues with RUUs when you have Super-CID, even with the original shipping RUU and a relocked boot loader. Can someone confirm that using RUUs is safe as long as the boot loader is relocked? What if it isn't relocked? Just an error or a bricked phone?
2. Once you unlock your phone on 1.14, you are stuck with that radio forever unless you apply an RUU or switch to Cyanogenmod.
3. Assuming RUUs are safe, applying a different carriers' RUU on my AT&T One X won't hurt anything. There may be apn issues, but otherwise everything should work (especially the camera and wifi).
Again, I understand that without root, I may not be able to add apns anyway. AT&T at least seems to have blocked the ability on their stock rom; not sure if other carriers do the same.
I really appreciate the help. I have searched, so this is more of a confirmation than anything else. Just trying to avoid bricking my phone and learn something new at the same time.
Tim
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s :
- you don't need to root your phone to add apn . I can add T-Mobile apn just fine after I flashed ruu.
- ruu.exe can't run if you bootloader is unlocked.
Sent from my HTC One X using XDA Premium HD app
tritran18518 said:
Im on hboot 1.14, firmware 2.20 att. Unlocked , rooted , flashed Rom. However , I had some problem then decided go back stock.
1. Downloaded ruu2.20 for att
2. Relock bootloader
3. Boot phone to bootloader mode then run ruu. Now my phone is stock
P/s : you don't need to root your phone to add apn .
Sent from my HTC One X using XDA Premium HD app
Click to expand...
Click to collapse
Thanks - that answers my RUU questions as far as going back to stock using RUUs. I assume the same applies to other carrier's RUUs, i.e. Telus/Asia. What about using an OTA on a phone with Super-CID?
redpoint73 said:
A factory reset or running the RUU will not change the CID.
SuperCID doesn't prevent you from getting the AT&T OTA (although root and unlocked bootloader will).
Click to expand...
Click to collapse
^^
jiggamanjb said:
^^
Click to expand...
Click to collapse
Okay, I think that answers my questions. No problems with using a RUU, AT&T or otherwise, as long as it is for the XL. Stuck on my current radio unless I use a RUU. And I need to relock my bootloader before applying a RUU, although I can unlock it after. I will lose root, however. Thanks!