Database Info

half formatted phone?

I have a problem with my Galaxy R. Yesterday, i installed infected rom with CWM. But the phone hangs at Galaxy R logo.
So I went flash back with odin but that doesn't work:
After first try with Odin, it says fail and my CWM was gone.
Now i have tried several times flashing an other stock ROM. When i flash some of them, i see it installs only 10%, always aborts on wrings factory.img or APP left above in Odin.
My computer maybe has a bad hard drive and it also runs within windows 8 on a virtual machine. But i can flash CWM on it!
After rebooting, CWM always says "installing update" after opening and verifying. But it can't go further!
I think that i must format the phone but can i do it with odin? Also, I haven't tried another computer yet. Please help!
Thank you!

You should have done this prior to installing Infected ROM:
- Backup with CWM
- Factory reset
- Wipe cache
- Wipe Dalvik cache
- Format /system
- Mount /system and /data
- Install ROM
- If it fails do step 2 to 6 , then restore with your backup .
Remember this the next time you flash any ROM .
Herpderp Adreno + Tegra.

EmoBoiix3 said:
You should have done this prior to installing Infected ROM:
- Backup with CWM
- Factory reset
- Wipe cache
- Wipe Dalvik cache
- Format /system
- Mount /system and /data
- Install ROM
- If it fails do step 2 to 6 , then restore with your backup .
Remember this the next time you flash any ROM .
Herpderp Adreno + Tegra.
Click to expand...
Click to collapse
Thanks for the reply EmoBoiix3 . I would keep that in mind!
I did do a factory reset but that's all. I shoudn't have flash my phone with Odin as it breaks CWM. But now my phone won't enter CWM and won't flash with Odin. Any suggestions? Thanks!

henkmasterpro said:
Thanks for the reply EmoBoiix3 . I would keep that in mind!
I did do a factory reset but that's all. I shoudn't have flash my phone with Odin as it breaks CWM. But now my phone won't enter CWM and won't flash with Odin. Any suggestions? Thanks!
Click to expand...
Click to collapse
Have you pulled out the battery and place it back & try again?
** How you restore using CWM? Also, you need to navigate & choose the correct CWM flashable ROM file.

Yes i've tried that. The phone has slept over 6 hours with no battery
I must be more specific:
When I install CWM on my phone with Odin, it passes. CWM is on it BUT > everytime I want to go in CWM, it does say "Installing update" and it never ends. I think that the InfectedROM has a update.zip orso that CWM wants to install. But that zip is corrupted so i need to format my phone so CWM will launch the menu options and I can do a restore with my CWM backup.
Maybe some checkboxes must be on in Odin to format it?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note: screenshot is not mine. My computer does reorganize the phone and Odin to)
Thank you!
EDIT: Now trying Odin stock firmware with another computer.

YES
Thanks ardatdat and EmoBoiix3 for your help!. My computer wasn't 100% so I flashed it with another computer and it worked the first time!
Now making a nandroid backup.
Again, thanks for all your help!

henkmasterpro said:
Thanks ardatdat and EmoBoiix3 for your help!. My computer wasn't 100% so I flashed it with another computer and it worked the first time!
Now making a nandroid backup.
Again, thanks for all your help!
Click to expand...
Click to collapse
Glad everything is good now !

Oh yay
Herpderp Adreno + Tegra.

[Q] Q How to backup my stock rom

Hello guyz, the title says all; bytheway I meant how to back up my stock rom of my new GFit XWQ3 coz I cant find it...And also without using the rom manager coz I know it briks the phone. At the end how to restore it after a try of a custom rom
TY to reply
My version is:
PDA S5670XWKQA
PHONE S5670XWKQ3
CSC S5670ITVKQ3
ANDROID 2.3.4

let me guess
you're italian just like me and maybe an S-lunga customer
i've rooted my phone so i don't know if i could help you providing a good rom backup
if it's possible i'll be glad to do it
a shot of my fit version just to be sure
h*tp://i.imgur.com/0mPnP.png

"let me guess
you're italian just like me and maybe an S-lunga customer "
lol yeah exactely
we have same versions.
BTW it is possible restore a backup using this http://forum.xda-developers.com/showthread.php?t=1339640 , in restore mode and saving that backup to SD?

install cwm and backup using it.

and are you sure that if I backup via CMW I will be able to restore my stock rom from this backup after I will have tried any other custom rom?
I have already CMW 4 on my system, after a recovery power on, I have selected backup and it putted the backup on sd folder named CMW/backup...I know I can restore it with the restore command, but I am not sure if it will work, or if will BRICK my phone

yes, i myself have used it.

great ty..and I can see on my sd these files :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is this all fine?
There is a way to know if the backup is not corrupted?

image doesnt work...
it must have completed successfully, or it would have shown an error.
back the backup to a safe location on your pc.

backup was fully done, and I ave already saved on my pc...so now may you tell me a couple of very good custom rom without bugs?
last thing...on my backup stock I have my all originals "PDA S5670XWKQA PHONE S5670XWKQ3 CSC S5670ITVKQ3 ANDROID 2.3.4" and I can restore all with CWM ? right? TY for ur patience

IMO,
RazoDroid, Chocobread are the best.
Creed's ROM is kinda good too.
---------- Post added at 12:07 AM ---------- Previous post was at 12:06 AM ----------
just head over to the development section and experiment all you want...

I will try

did it work?
can you tell me what precisely you have done?
I asm also an esselunga customer, italian is easier for me )

for me it doesnt work

what doesnt work?

I cant return to my stock after the backup..I am stuck on custom now.
After recovery via cmw my phone restarts and loops like a hola hop

diavoloporco said:
I cant return to my stock after the backup..I am stuck on custom now.
After recovery via cmw my phone restarts and loops like a hola hop
Click to expand...
Click to collapse
Use cwm to wipe dalvic cache, cache..
Sent from my Galaxy Fit @ 801Mhz- Razodroid

For backup I use Titanium Backup.

ZmisiS said:
For backup I use Titanium Backup.
Click to expand...
Click to collapse
and after Titanium how you can restore your stock rom after a custom rom?

diavoloporco said:
and after Titanium how you can restore your stock rom after a custom rom?
Click to expand...
Click to collapse
After a custom rom, install Titanium Backup, open it, press the left button, select Batch, select All restore and follow instructions.
Previously, when doing a backup, select Backup All apps + data.
To Titanium work system must be rooted.

mmm it seems quite strange...why other people use cmw , wipe cache , dalvik etc? your way seems a lot easy

Bricked Or Not Bricked?

I have a friends G2x here I wiped his sdcard cause he said he had a back up but he did not but we had it running on hellfire. He wanted me to install CM7 for him so I went ahead did a factory data reset, wiped cache, delvik, and formated his /sdcard cause it was full and he said he had everything on his computer. Well After doing the wipes an formatting I mounted the sdcard via cwm and put on the cm7.zip and gapp.zip flashed both went to reboot and now it only gets to the second LG boot logo with I guess cm7 design behind it and then reboots so I am bootlooping but I am able to boot into recovery still so I am like WTF happend? lol Ive tried a few things already but I was wondering if anyone had this happen to them? By the way my friend only backed up photos no his whole sdcard so I have no Nandriodbackup :crying: FAIL
also just found out via CWM trying to mount internal SDCARD I get this error:
E: Cant Mount /emmc/
seems like there is no /sys file when I do error report i get
failed to open /sys/class/android_usb/android0/stat: No Such File or directory

Was CWM flashed using nvflash or ROM Manager?
Sent from my LG-P999 using xda premium

I'd use nvflasher and start from scratch. also did you goto mounts and format system?
i always do before flashing new rom.
Sent via G2x on CM7 b135.2 w/faux 52 kernel

Well original install I am not sure he bought the phone an it was rooted but I did do nvflash to cwm and to stock to see if either would boot and it didnt work either way it but I did the NVFLASH CWM so I could have CWM recovery but right now all i can do is boot into recovery if I try to boot system it just bootloops
I have formatted /sys , /sdcard, attempted to format /emmc but it gets an error and says cant mount skip format is it possible his internal sdcard or memory is dead?

Try using the Batch Cleanup tool. You can find it in the Dev section. Then flash a GB ROM and see what happens
Sent from my LG-P999 using xda premium

The G2X is nearly impossible to brick. There is almost no way to brick it. There will always be an answer from the community ready to help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I am going to try to use that batch clean up tool in the dev section will post results

Ok so did the batch had done it early as well here is a pic of the cmd I ran looks good to me and I am able to boot into recovery but once more I end up boot looping I attempted to install cm7 should I try a different gb rom?

Thanks for the help and suggestions everyone I finally got it did the batch clean up then went ahead and located stock rooted nandroid backup files setup the directory in the sdcard and then restored back up and Booted right up into stock rooted device! I then re-attempted to flash the cm7 latest stable an sends me into boot loop so I am going to say that the rom .zip on that latest cm7 stable is corrupt or something went ahead to the previous stable before that one and flashed it booted right up ! so Thanks a lot again guys and hopefully this will be helpful to anyone else that may encounter this same issue I knew it could be fixed since I could boot into recovery

[ROM][STOCK] QMobile Noir A10 [ICS v4.0.4][CWM Flashable]

QMobile Noir A10 Stock ROM [ICS v4.0.4]​
Hello everyone! I was browsing around the Noir A10 rooting threads and came to know that many users are having problems with their custom ROM's so they want to revert back to the Stock ICS ROM. This is why I have made a CWM Flashable ZIP of the Stock ROM so the users can easily revert back to stock anytime.
I took a nandroid backup using CWM Recovery and then converted it into a CWM Flashable ZIP using an updater script, instead of just providing it as a CWM Backup.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
File Size: 360 MB.
Download Link: http://noira10.wordpress.com/2013/02/27/qmobile-noir-a10-stock-rom-cwm-flashableics-v4-0-4
Installation Instructions
1) Download the .zip file and put it in your SD Card's root.
2) Boot into CWM Recovery.
3) Install ZIP from SD Card.
4) Wipe User Data.
5) Wipe Cache.
6) Wipe Dalvik Cache.
7) Reboot.
NOTE: No bugs detected. 3-axis Accelerometer and Orientation Sensors working fine!

Thanks dear. I was just wondering that how we make flashable zip backup from cwm nandroid backup?
Sent from my Samsung GT-S9081 using xda premium

You need to write an updater script for that purpose.
Follow this tutorial.
http://forum.xda-developers.com/showthread.php?p=27941937

boot loop problem
My rooted Noir A10 has got a boot loop problem. I cannot access dalvik cache anyhow other than wipe/factory reset. Please help

can u plz provide SP FLASH TOOL flashable rom i really need it badly...bcz i formated my A10's FLASH using SP FLASH TOOL and now i'm getting two problems
1. NVRAM ERR
2. INVALID IMEI
i solved the above two but every time i flash a rom then again these two errors i have to solve again....if i can flash stock rom via SP TOOL then this problem will be solved permanently plz its a humble request.....

does this will fix my boot logo issues as custom rom have installed there own.
and
android system recovery 3e is missing , how can i get it back too

inv3rse said:
You need to write an updater script for that purpose.
Follow this tutorial.
http://forum.xda-developers.com/showthread.php?p=27941937
Click to expand...
Click to collapse
do u still have noir A10? if yes have u tried 4.4.2 yet?
as i have some question abt it.
also this is my phone first backup when i rooted and well i dont know how to access it.
userdata_20131227_090252.backup
any idea, i used cwm recovery, but it dont work through it.
also how can i remove that stupid samsung galaxy S first bootloader image? as it is struck along with my shut down battery icon is missing

Galaxy 9003 clean installation

Hi, I have a galaxy 9003 whit installed the 4.2.2 remICS-JB old release.
I would like to know if you can make a detailed guide that describes how to make a clean installation of the least release of remICS-JB ROM.
Thanks a lot for your help.

Neo_01 said:
Hi, I have a galaxy 9003 whit installed the 4.2.2 remICS-JB old release.
I would like to know if you can make a detailed guide that describes how to make a clean installation of the least release of remICS-JB ROM.
Thanks a lot for your help.
Click to expand...
Click to collapse
no , use Remics-JB 5.7
clean installation is :
- full ddlf2 with odin here the link http://www.mediafire.com/?n3udy6p94pvyoaz
- cf-root ddlf2 pda only http://www.mediafire.com/?n3udy6p94pvyoaz
- reboot recovery and Wipe data/factory reset
- on recovery , Mounts and Storage > Format /System
- flash RemICS-jb 5.6 here the link http://d-h.st/Ltz
- flash Part2 5.7 here the link http://d-h.st/g2U
- flash fix super use here the link http://forum.xda-developers.com/attachment.php?attachmentid=2057868&d=1371761465
- boot the phone for 3 min and reboot to recovery and flash gapps

9003
abderrezak said:
no , use Remics-JB 5.7
clean installation is :
- full ddlf2 with odin here the link http://www.mediafire.com/?n3udy6p94pvyoaz
- cf-root ddlf2 pda only http://www.mediafire.com/?n3udy6p94pvyoaz
- reboot recovery and Wipe data/factory reset
- on recovery , Mounts and Storage > Format /System
- flash RemICS-jb 5.6 here the link http://d-h.st/Ltz
- flash Part2 5.7 here the link http://d-h.st/g2U
- flash fix super use here the link http://forum.xda-developers.com/attachment.php?attachmentid=2057868&d=1371761465
- boot the phone for 3 min and reboot to recovery and flash gapps
Click to expand...
Click to collapse
Sorry but what mean "FULL DDLF2" and "CF-ROOT DDLF2" ?
Thanks for your help

Neo_01 said:
Sorry but what mean "FULL DDLF2" and "CF-ROOT DDLF2" ?
Thanks for your help
Click to expand...
Click to collapse
full ddlf2 is a stock rom v2.3.6 you should downgrade first with odin :
1:Turn Off Your Phone
2ress Vol Down+Home + Power Until Downloading Screen Comes...
3:Than Start Loading Files in
Code:
PIT =latona_20110114.pit
PDA=CODE_I9003DDLF2_CL1153545_REV08_user_low_ship.tar.md5
Phone=MODEM_I9003DDLE1_REV_00_CL1149304.tar.md5
CSC=GT-I9003-MULTI-CSC-ODDLF2_RST.tar.md5
For CF Root Open Odin 1.85 Load Only PDA=DDLF2-CFROOT-30-06-2012.tar
image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and cf-root is give you ClockWorkMode Recovery and root your phone :: just use pda only

Neo_01 said:
Hi, I have a galaxy 9003 whit installed the 4.2.2 remICS-JB old release.
I would like to know if you can make a detailed guide that describes how to make a clean installation of the least release of remICS-JB ROM.
Thanks a lot for your help.
Click to expand...
Click to collapse
Better some one confirm, but I have no problems doing this:
Reboot recovery
Backup (better)
Wipe cache partition
Advanced>wipe dalvik cache
Mounts and storage>format /system
Install zip>rom
Install zip>gapps
Also first restart I edit build.prop and change lcd_density to 220 instead 240