Hi,
I have a problem with my P6210. I am trying to install CWM on it (it has root access) but whenever I go into the recovery, it cannot find the sdcard with the cwm zip file. I have put it in multiple places in the system to see if the recovery software can find it but fails.
The photo shows the screen I get every time I try -
https://www.dropbox.com/s/gau2erxviegyqwc/2012-06-22 05.26.54.jpg
Anyone please?
It means you either didn't put the zip in the right place (on the root of the SD) or you have a wonky MicroSD card. Happened to me with an off-brand 8gb. Used another 2gb card I had lying around and works fine.
Thanks a million!
I remember this is how i rooted my tab too. I swapped the sd card from my optimus black to my tab and was able to root it like that. Must have forgotten.
Again thanks a lot.
My pleasure. Just got my GT+ (trying to decide if it can replace my GT10.1) and had fun figuring this one out myself. It's a bummer there's no working ICS for this tab (yet); on the GT10 it was night and day from the best custom 3.2 ROM to the first ICS ROM.
Related
Hi all,
I am a noob, first post. I purchased my XOOM (WiFi version) one week ago. I was led to believe it was stock (it is 2 mo. old) and have discovered that it has been rooted and modded. Here is the Device Info:
Android Version 3.2
Kernel Version 2.6.36.4-Tiamat_Xoom-v2.1.0-Tachi-StockGPU-gcef3887
It did not come with an SD card. I purchased one today (16gb). Are there critical files missing that were on the original sd card?! Thanx in advance.
To further clarify; if I wish to factory reset the device, are there files that I will need on the sd card other than a current backup?
the stock xoom didnt come with an sd card. it didnt even support it initally. hitting the restore to default button will not remove your root.
patass said:
the stock xoom didnt come with an sd card. it didnt even support it initally. hitting the restore to default button will not remove your root.
Click to expand...
Click to collapse
What exactly do you want to do with your Xoom? It is great to already be rooted and that Tachi kernel is a big improvement over stock. Do you just want to clean out the previous owners stuff and make it more yours? Or do you want to go back to a pure stock state?
That is a good question. I guess my main concern is that I am able to mod my device without any problems that the previous owner may have caused by removing critical files on the SD card. I'm a little paranoid as I am just beginning to learn.
I discovered a clockworkmod recovery file "recovery-clockwork-4.0.0.4-stingray.img" in the internal memory. I don't understand what that file is. Is this a stock recovery file?
Janoska said:
That is a good question. I guess my main concern is that I am able to mod my device without any problems that the previous owner may have caused by removing critical files on the SD card. I'm a little paranoid as I am just beginning to learn.
I discovered a clockworkmod recovery file "recovery-clockwork-4.0.0.4-stingray.img" in the internal memory. I don't understand what that file is. Is this a stock recovery file?
Click to expand...
Click to collapse
ClockworkMod recovery is a custom recovery. It is installed when rooting and is a great improvement over the stock recovery because it allows you to make a complete system image so you can experiment with new rom or kernel and always be able to restore to a previous state if you're dissatisfied or if something goes wrong. Also, with the right version you can save files to your external micro sdcard [you purchase it.it does not come with the Xoom] and flash them through your CWM recovery menu. However, version 4.0.0.4, the one you have installed, doesn't recognize the external sdcard. You will need to install version 3.2.0.0 R4c.
Thanks for the info, I will install version 3.2.0.0 R4c. Looks like the previous owner saved me some work.
hey guys and girls, hopefully you can help me out.
I'm using a t-mobile galaxy S, trying to flash a new rom after I rooted it. I followed the instructions, and I have CWM able to load. when I got into select the install from the SD card, I'm able to select the file (trying bionix frost), it tries to load it, but then comes back telling me 'Can't mount /sdcard' and any subsquent attempts to even browse for the install zip give me the same error. I can boot the phone into the rooted stock image, access anything on the SD card there fine, copy files to it, etc, but CWM will not install the ROM's or keep the /sdcard mounted.
anyone here run into this issue? I'm using CwM Voodoo lagfix Recovery 3.0.2.8x
It's been awhile since I flashed that ROM...
Did you change the mounts manually? Does the OP say to change mounts? Back then we had to change the mounts ourselves in CWM to UMMU.
I'm at work and just sending a quick reply..check the OP to see what your mounts should be
to clarify a bit, this isn't just on a specific ROM, this is for ANY rom I try, after I access any ZIP file through CWM, it unmounts the SD Card and won't let me get back to it unless I reboot, and the cycle repeats.
Ok. Sorry I can't help you with that. I'm still kinda new.
I'm sure you'll get the help you need soon especially with your last reply.
Good luck and sorry I couldn't be of help.
I'm backing up and will format my SD card to see if this is the problem, saw this fixed a couple of errors like this for other peeps.
So since I couldn't get CWM to install the rom, I used ODIN and flashed to gingerbread. that's installed and working (had it fail the first time, but the 2nd installed and was up inside 10 minutes)
Well, I had a bit of a stupid moment. I Inherited a G2X from a friend of mine, and, of course, my first instinct was to install Jelly Bean from. First off, I never made a backup of my previous data, and second, I botched an install.from the eaglesblood. I forgot to install the GApps, leaving me without the play store. Not much of a problem until I realized that the ROM wasn't reading or mounting my SD card. So, I cannot download the USB Mounting app because it requires an sd card, and that I can't install GApps because I have no way to move files from the computer and I have no way to download the app directly to the phone to install the GApps. Help me?
EDIT: I used clockworkmod recovery 5.0.2.0
If you have an SD reader on your pc , take the SD card out of the phone and load a different rom or gapps that way (in the proper folder or remember where u put it to access it)... Then replace SD card in the phone and flash via cwm.
Sent from my Galaxy Nexus using xda premium
Ah-ha! I just took an older phone, and mounted it on there to transfer the files. Thanks for the help, though.
Hi all,
I have in the past install cyanogenmod 10.1 via Clockwork Recovery Mod. I was "playing" around and basically I am stuck on "Samsung Galaxy Tab 2 10.1" (formatting things in Recovery.....I know stupid!)
Most ROMS seem to suggest installing via Clockwork by copying the files over to the SD card, I am a little lost because I cannot even boot to android and Clockwork doesn't seem to allow USB storage (not sure if it was designed to).
I assume I can flash cyanogenmod again using ODIN? If so how would I go about doing this? Download mode is working fine so fingers crossed you guys can help.
Many thanks!!!!!
sambd said:
Hi all,
I have in the past install cyanogenmod 10.1 via Clockwork Recovery Mod. I was "playing" around and basically I am stuck on "Samsung Galaxy Tab 2 10.1" (formatting things in Recovery.....I know stupid!)
Most ROMS seem to suggest installing via Clockwork by copying the files over to the SD card, I am a little lost because I cannot even boot to android and Clockwork doesn't seem to allow USB storage (not sure if it was designed to).
I assume I can flash cyanogenmod again using ODIN? If so how would I go about doing this? Download mode is working fine so fingers crossed you guys can help.
Many thanks!!!!!
Click to expand...
Click to collapse
If download mode is working, why not just download the original rom for your tablet - get back to stock, and start over ? Not sure if your formatting may have changed something - I would feel more comfortable flashing back to stock with ODIN, and starting my rooting / upgrading / flashing from a solid / stock base.
Just my .02 cents
Good luck, and hopefully someone will jump in with a more useful option
Regards,
You can switch your internal and external storage, so your tablet thinks everything on your sd card is your internal storage. This way you should be able to access your internal storage again (unless your phone doesn't even give you the option to select internal storage). You can do this with the Link2SD app. Besides, this way your internal storage has more space too.
Sent from my GT-I9300 using xda premium
Hello everydody, I am experiencing some difficulties with my Samsung, model GT-I9003-phone which "dropped off a lorry" somewhere next to my relatives somewhere in Asia. When I goth the device, it was in a non-working condition, except a boot-loop and the download-mode. Back then, I had the package of the phone where the exact version ( I don't know if this is what is called "Baseband" or at least is called baseband at my wife's GT-I5003) was specified. So, back then, I was able to find the exact ROM for the device. Unfortunately, the box with the version number now is - somewhere.
After flashing a stock-rom, I managed to enter recovery-mode where I read something about the internal memory being corrupt. As far as I can recall, I then mounted the external SD-Card and somehow managed to reboot the system back to almost normal operation. Even reboots appeared to work normal, besides the fact I had no memory access, neither to internal nor to external sd. In addition, GPS malfunctioned, too.
Unfortunately, even this state didn't last for long time. After several weeks of now-and-then-use, the system just broke down again into a boot-loop. After some time of flashing a variety of stock roms, I managed to flash clockworkmod recovery which works perfectly well. Unfortunately, I didn't manage to root the phone before it "collapsed" again. Besides the possibility, I'd guess this could be a resaon for CWM being unable to flash a custom rom? Otherwise, I'd just test my way through the varieties of versions .
Basically, I do have two questions: 1. is there a possibility to find out if internal memory has failed - and if yes: How?
2. Is it possible to install any version of CM on that phone in the condition it is in?
Thanks a lot in advance for any answers
Hello everybody, I finally found the box . It reads GT-I9003MKDTHL. Is my assumption right that there are no such things as basebands in the GT-I9003 any more and I should be able to flash pretty much any firmware? Furthermore, today I tried to format what is specified as "sd-card ext" in CWM fir GT-I9003 and it gives me an error-message. When I flash "sd-card", my external sd-card gets formatted. So, I'd presume the internal sd is just fried. I read about a workaround for GT-I 9000, where someone installed Androd on a partitioned external SD. Is there somebody who knows someboy having heard about somthing similar working with the GT-I9903?
One step forward...
Hello everybody, I finally managed to get some light into my issues as I once again figured out how to get a software installed and running . It's this one:
http://forum.xda-developers.com/showthread.php?t=2329200
Thanks a lot to the guy who just posted it somewhere where id could do good...
By the way, I figured out that this software actually includes the Baseband.
As in this version, the original recovery system is running and giving me an error message when I start it without external SD-card, I am now quite sure that the internal memory has just failed as this error message was specified in another posting of someone who had a similar issue with a GT-I9000.
The biiiig "Outch" is, that I am unable to install any CWM Recovery System with that Baseband..This results in me not being able to upgrade the software to ICS, where - as far as I read some troubleshoot-information - will enable me to mount an additional partition on my SD-Card as Data-Partition which isn't possible yet (i.e.: I can't access my SD for storing data or whatever - it's just specified as "not there").
I tried to install the XXKPE-Baseband to be able to go for KPQ which would enable me to install CWM Recovery. I also installed Bagarias CWM-normalboot-image via Heimdall - but I was unable both to boot the OS and to find any trace of a zip-file on the SD-card.
Edit: I managed to install the right CWM - it's mentioned in the post where I've got the firmware from... now, I only have to figure out how to deal with the fact that "officially" there is no SD-card inserted - or, better, that this SD-card is now flagged as "internal SD" - and how that machine can find the zip-file on it
Thanks for every bit of help with that issue
Try Aroma File Manager with Terminal
For SDCard issue you could probably switch them in vold.fstab in /system/etc
Good Luck !!!
try this- http://forum.xda-developers.com/showthread.php?t=2329200