Related
Hey! I found a post to another user who had a similar issue here: forum.xda-developers.com/show...=709788&page=2
I also can get into recovery, however, it's not finding any backup to use etc.
I think if I could get a recovery img pushed to my SD card and go back to stock, I could work with that. Running Zen Rom 1.7 currently. I was trying to clear up some space to install apps2sd as I was out of room and did a full wipe after I made a copy on my PC of my entire SD Card, but now when i go into my phone shell it confirms the phone but can't see system directory.
Not sure how to get stuff back on SD to work with it. Any ideas?? HELP- Phone is 100% DOWN!
THANK YOU SO MUCH!!!
Kiley Ohl
kileyohl said:
Hey! I found a post to another user who had a similar issue here: forum.xda-developers.com/show...=709788&page=2
I also can get into recovery, however, it's not finding any backup to use etc.
I think if I could get a recovery img pushed to my SD card and go back to stock, I could work with that. Running Zen Rom 1.7 currently. I was trying to clear up some space to install apps2sd as I was out of room and did a full wipe after I made a copy on my PC of my entire SD Card, but now when i go into my phone shell it confirms the phone but can't see system directory.
Not sure how to get stuff back on SD to work with it. Any ideas?? HELP- Phone is 100% DOWN!
THANK YOU SO MUCH!!!
Kiley Ohl
Click to expand...
Click to collapse
you might need to format the sd card, see if that helps
so now that we have a working sd card is there any way to change the save location of the browser and camera to the new working sd card?
Sent from my Xoom using Tapatalk
is there anything special to get the SD slot working? Mine still doesn't seem to be doing anything.
Well, in my opinion, which may be wrong...and probably is.
The new sd mod mounts the actual sd as /sdcard2/.
The problem i see with this is all the apps are looking for /sdcard/.
Now I think the best way to handle it would be to symlink /sdcard/ and /sdcard2/ as one volume.
The problem with that is that the volume manager would probably freak the **** out when you take your sdcard out of the device.
I don't know though, maybe bigrush or whoever got it working has this thought out better than I would have - but I am a software developer, not a kernel developer. That **** hurts my head.
Right now, i don't have an extra SD card worth my time of putting in (biggest extra I have is 8 gigs).
The only point I really see in it at the moment is extra space available from a file manager.
I am not sure if media scanner has to be modified to include the new directory to pic up on pictures, movies, and audio.
06types said:
is there anything special to get the SD slot working? Mine still doesn't seem to be doing anything.
Click to expand...
Click to collapse
Lol root your xoom and flash the new tiamat 1.3.0 kernel
oh, maybe ill just break down and root it... I didn't really see any point until now with the lack of roms out for this so far.
I have already flashed my xoom, with the original one button flash. The new version does not have a way like the original to just one button the kernel. Will I have to re-root everything and go from there or will it sense that I am already rooted and take me to changing the kernel to be able to use the sdcard?
floridatank said:
I have already flashed my xoom, with the original one button flash. The new version does not have a way like the original to just one button the kernel. Will I have to re-root everything and go from there or will it sense that I am already rooted and take me to changing the kernel to be able to use the sdcard?
Click to expand...
Click to collapse
if you use the newest one click method with tiamat 1.3.1 you will be wiping your xoom's data back to stock as well. which means you'll have to setup your xoom again and reinstall all your apps again.
if you want to just flash the newest kernel w/out wiping the data just follow the instructions on this page:
http://forum.xda-developers.com/showthread.php?t=978013
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
kefloxin said:
I got a new LG P999 (I think that's the G2X). I'm new to Android but I'm not sure if I should root/mod or not.
Is there really any significant benefits from modding (like speed or stability) or it's just to make your Android flashier?
Also, what mod would be best to go for? And if someone could link me to a beginner tutorial on how to mod (with simpler terminology; I only found some with terminology like NANDroid, clockwork recovery, etc... which I don't really understand), that would be much appreciated.
Hope someone can help, thanks!
Click to expand...
Click to collapse
Well, rooting/modding gives you every benefit out there. Battery life, speed, options, features, the list goes on. Flashing ROM's is basically 99% the reason why people root or install a custom recovery on their phones. NANdroid, Clockwork MOD, etc are basically the basis and the stuff that you need to know about rooting. Since you're new I suggest you read a lot first and get to know what those terminologies are. ClockWork is a custom recovery that enables you to flash a custom ROM onto your phone.
Here is the G2x Bible. That's a reference guide to most, if not everything, that you need to know.
Here is the NVFlash method that you need to do to install Clockwork onto your G2x. You don't really need root for the G2x, just install Clockwork via that guide and you'll be good to go.
Remember: Read, read, and read.
Thanks for your reply! Those links helped me a lot. A few questions though:
1) If I don't have an external SD card, will I be able to put an external SD card without problems later? And can I re-flash for the external SD card support if desired?
2) Once I'm in the ClockworkMod Recovery, how do I put the ROM on my phone? (Flash is the correct terminology if I'm not mistaken).
3) Which ROM or mod should I go with? From the looks of it, a lot of people use CyanogenMod, but is there one that's most stable/fast?
Thanks again for your answer.
Here's another guide on NVFlashing.
These are my 3 favorite ROM's. And I'm sure most of the G2x people would agree as well.
Eagle's Blood: Based on LG's stock 2.3.3 Gingerbread.
Weapon G2x: Again, based on LG's stock 2.3.3 Gingerbread, but with Whitehawx's many tweaks and features.
And of course, CyanogenMOD 7 Nightlies: It's based on Google's AOSP, but the CM team has added in hundreds of tweaks that makes the user experience the best you can ever get on Android.
My favorite is CM but I suggest you try all 3 to see which one you like the best.
Yes, you can slip in an SD card after you've flashed if you want. Just follow the instructions carefully on how to NVFlash, there's even a YouTube video on how to do it.
Once you're in CWM, I suggest you do a NANDroid backup to backup your current ROM. Then do the following steps.
1. Wipe Data
2. Wipe Cache
3. Wipe Dalvik Cache (within Advanced)
4. Then go into mounts and format your /system
5. Then proceed to flashing your desired ROM.
Here's a quick video on how to flash a ROM.
But note; that video is how to flash a ROM on a myTouch 4G, just ignore the ROM's I showed in that video as it's for the MT4G. But the Clockwork MOD that you see there is just like the one for the G2x, except now the letters are blue. Do as I did in that video by wiping everything. Only thing I left out is formating /system since it wasn't needed on the MT4G. So don't forget to do that on your G2x.
Also, do you have Froyo or Gingerbread right now?
If you need any help with your g2x just drop me an email at [email protected]. I will be happy to help with any questions you may have.
Sent from the fastest g2x in the world
Thanks again for your awesome reply mackster248.
To answer your question, I'm currently running Froyo and I'm not actually with T-Mobile. I'm in Quebec with Videotron but I read it's the same phone. The phone model I have is LG P999DW.
I think I'll go with CM V7.1.0.1 as my first ROM (the nightlies may not be as stable as I want them to be). Do you think that would be an okay ROM as a first?
So just to confirm, this is what I will be doing as a whole process:
First, I will follow the NVFlashing guide which will allow me to use ClockworkMod Recovery. Next, I'll do a backup with NANDroid (which I assume is an option in CWM). Following that, I follow the wiping steps you listed (same as your video). Is that correct or am I missing something?
Thanks again!
EDIT: So I followed the NVFlash steps and it worked fine until I tried to boot in Recover by holding Vol Down + Power, but it doesn't seem to do anything... I can boot up the phone fine normally by holding the power button though. Is there a reason booting into recovery wouldn't work?
EDIT 2: Ah, nevermind. It works after I took out the battery and tried again.
EDIT 3: I haven't wiped my data yet in the recovery, but it seems I need an SD card so I can load the zip of the ROM I want. Is there a way to load the ROM from my computer or will I need to get an SD card first? Also, I would like to know if I should root as well? Does it make a difference? If not, why do people root before flashing?
Do you mind making a video of all the steps you did in exact order? also people root because most phones just use ROM manager to flash clockworkmod right from ROM Manger, but we are using NVFlash so we dont technically need it. Also new to the G2x, from (wind Mobile, i believe its the same one as the videotron P999-DW)
but im so scared to flash lol i had a vibrant i9000-m die on me before :3
Well, I can't make a video of what I did since I don't have a spare camera. All I did up until now is follow the NVFlashing guide to get ClockworkMod Recovery. It's not very hard to do actually.
I'm apparently supposed to wipe data, etc. now but I don't want to do that because steps later say that I need to flash from the SD card which I don't have. So I need to know now whether I need an SD card to flash a ROM on the phone? I've ordered an SD card which might take a while to get but after I get it, I also would like to know whether I need to root to flash? (since ROM manager says I need to root to use it, maybe I need to root to flash a ROM via CWM as well?)
I downloaded ROM manager and it says I need to root my phone for it to function. I also tried "Flash ClockworkMod Recovery" via the ROM manager which gives me an error as well.
So if someone could let me know whether 1) I can flash without an SD card and 2) whether I need to root to flash via CWM, that would be much appreciated. Thanks!
The newest version of CWM Recovery requires a physical SD to put the rom backups on. Go get yourself one. The smaller capacities are very inexpensive now, but it is nice to have a larger one if you can afford it. Each backup is very large, so a small card would run out of space quickly if you don't offload them to your computer or another storage medium. If you want to backup to the internal sd then install the older version (4.0.1.5) of CWM that support internal sd only, then you don't need a physical sd card. That is why TGA_Gunnman put that version back into his flasher.
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
hesher said:
With the latest CWM and a g2x and NO sd card, I was able to root, and flash roms. Just select the flash zip from internal SD option in CWM. I did not backup though.
Click to expand...
Click to collapse
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
No just place it in the root.
kefloxin said:
Wouldn't the flash zip be deleted after you wipe the data, etc.?
Also, do I need to root for flash via CWM to work?
Click to expand...
Click to collapse
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
kefloxin said:
So you're saying that if I place the ROM on the root of the phone, it won't be deleted once I wipe data, wipe cache, wipe dalvik cache and format my /system?
I would just like to make sure as I don't want to be stuck without a phone until I get an SD card and no backup.
Thanks
Click to expand...
Click to collapse
If you were factory resetting a Samsung the internal SD is also wiped; but thankfully, LG does not do that. When you do a factory reset on the P999 all it does is wipe the data and cache partitions. The internal sd is left alone. So yes you can place the zip package on the internal sd, reset and then flash it. It also doesn't have to be on the root. In CWM if you select install zip from sd card, you can then choose external or internal sd and navigate to any folder and zip file you want to flash. Have fun!
I was able to install the old CWM with internal SD card support and I used that to make a backup and flash the ROM successfully. Everything seems to be awesome so far except that I can't use USB mass storage from the O/S. I turn on USB mass storage and my computer doesn't detect it. The only way to make it work is going to CWM and mounting the USB. Anyone know how I would be able to make it work through the O/S again?
I also can't install Swype without an external SD card, but I'll have one soon so that's not a big worry.
Aside from those things, I think it's pretty cool.
Thanks to everyone who helped.
Have fun bud. No phone is perfect, but the G2x is pretty awesome.
Powered by a G2x
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
kefloxin said:
Yeah, it's awesome. But anyone know why USB mass storage doesn't show the removable drive on my computer? I have to go into CWM and mount it to make it work, but I would prefer to be able to do it via the O/S.
Thanks for all your help though guys, you guys are awesome
Click to expand...
Click to collapse
Install the LG Gingerbread drivers. Let me find a link.
Edit: I had the same problem as you, but this fixed that.
http://www.lg-phones.org/t-mobile-g2x-usb-driver.html
Powered by a G2x
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
kefloxin said:
It doesn't seem to work. I installed the drivers via the download link in the link you provided. Didn't work, then I tried to update following the instructions using the LG mobile support tool, and it still doesn't work either. (I've tried on 2 computers btw.)
I'm not sure why it only works via CWM, any other suggestions?
Click to expand...
Click to collapse
Could be USB connection type is set wrong internally. See if there is some setting in CM7 for it. On a stock rom you can go into LG Hidden menu and set USB to automatic.
Hi guys, i'm in desperate need of your help. i think my precious o3d might have been screwed.
first let me tell you what i did. as you know the internal sd card of o3d is 5gb or so and it fills up very quickly. this internal sd card is mounted as /sdcard. i have a class 10 16gb micro sd card and when i insert it, its automatically mounted as /sdcard/_ExternalSD. The applications or games, especially the ones that have external data folders which are like 1gb in size insists to be installed on /sdcard. You can't move those data folders to _ExternalSD, because then the apps doesn't work.
Then i came across this topic:
http://forum.xda-developers.com/showthread.php?t=1189701
As you can see that was exactly what i needed. I had CWM 5.0.2.0 installed so i downloaded the first .zip then copied all of the files and folders excluding the _ExternalSD folder to the external sd card then rebooted into recovery. From there i flashed the zip and rebooted again. phone booted up and all was ok and it worked. now the phone sees the external sd card as the internal one and the internal sd card was mounted as /sdcard/_ExternalSD. I then formatted the internal sd card from the settings menu because i already copied all of the stuff there to the external card. It worked fine and the internal card is formatted. After that i decided to get a nandroid backup so i opened the rom toolbox program. From the menus i selected the backup option, gave it a name, clicked ok. the phone rebooted into cwm recovery screen but nothing happened. then i noticed something was not right because there was some error lines under the cwm menus saying "E:can't mount CACHE:recovery/command" etc. Then i selected the reboot phone option but the phone rebooted right back into the CWM recovery again!! At that point i knew that i was @#?^ed.
Anyways i researched a lot and came across this thread:
http://forum.xda-developers.com/showthread.php?t=1156549
i did exactly what he said and it worked, i mean it flashed nicely. then i rebooted the phone but it booted into the recovery again!!! But this time the CWM recovery was gone and i believe this is the stock recovery screen. I can browse the menu of it and make selections but the phone boots into the recovery every time it reboots.
The recovery screen looks like this:
http://farm8.staticflickr.com/7010/6654644033_b616bc0635_z.jpg
Then i flashed the phone to the latest official firmware V21A_00, it flashed nicely but it still boots right into the recovery everytime.
Then i installed the Android SDK and tried to push the original vold.fstab file to the system using the adb command line tool but it doesn't see the phone. I think adb works only when the system boots up normally, not in the recovery mode.
I don't know if there's a way to install the CWM from the stock recovery somehow. If you know how, please tell. The CWM has more options.
I don't know what else i can do. It started to look ridiculous. If there are any experts cool enough to help please do so. I'll be waiting. Thank you...
Edit:
I also tried this:
http://forum.xda-developers.com/show....php?t=1244490
I starts just fine but get's stuck on the "RESET" command, after a while it gives "DOWNLOAD FAIL!" error. I think the phone is supposed to restart automatically but it doesn't. Manually resetting the phone doesn't work either.
I'm about to pull my hair out...
Edit 2:
I also posted on the official LG Mobile forum here:
http://www.lgforum.com/forum/boards...d-goes-into-recovery-mode-every-time-it-boots
Fingers crossed
Quite a post!
From all your post there is no mention that you formated and did a factory reset after 21a flash.
Can you please try that if you haven't?
Sent from my LG-P920 using xda premium
thank you for the reply!
i tried all 4 wipe options on the recovery screen then rebooted. it's the same, i'm back at the good old recovery again
Did you try with the external sd card out?
This is strange, usually a kdz flash coupled with a format fixes the problem.
Some how it still can't find the internal SD card.
I don't have further recommendations. Sorry
Sent from my LG-P920 using xda premium
yes i tried with the external sd card out. it didn't work..
vpamir said:
yes i tried with the external sd card out. it didn't work..
Click to expand...
Click to collapse
Hopefully someone else on this forum can suggest a way for you to unbrick.
your problem is although you have reset your phone, somehow it can't find a partition to boot from.
or
somehow the KDZ flashing is not totally successful.
good luck
If only there could be a way to be able to use the adb command from the Android SDK then i might be able to restore the vold.fstab file to its original, if the problem is that at all. Maybe then it'll work. To be able to flash the CWM Recovery again somehow might be a good thing too because it has more options like flashing .zip format roms but i have no idea how. Does anyone know if the stock recovery can flash some specifically named file to the system, does it have that kind of functionality? I'm desperate, please share your thoughts.
.............anyone?
I am sorry to say that but there is no solution for this problem yet. I have done the exact thing that you do and tried every single solution with no luck. The only way is to send it to lg repair service. My solution was to replace the mainboard.
Dostum gecmis olsun malesef tek cozum yolu anakarti degistirmek. Uzaman sayilirim android konusunda bosuna ugrasmayasin diye soyluyorum. LG servisi bile anca anakarti degistirerek cozum sunabildi. Temel problem internal karti formatlamis olman. Partititon table'i bozuyor bu islem malesef ve bu yuzden hicbir yontem ise yaramiyor.
Gecmis olsun tekrar...
so you say that the main problem was to format the internal sd card? well if formatting the internal sd card bricks the phone then why the hell is there an option to format it in the settings menu?
well if you didn't apply the swap fix, it wouldn't be a problem to format. When you swap the sd cards and format, it is the problem.
crime_of_heart said:
well if you didn't apply the swap fix, it wouldn't be a problem to format. When you swap the sd cards and format, it is the problem.
Click to expand...
Click to collapse
so you did exactly the same thing as me right? i mean you applied the swap fix then formatted the internal sd?
replacing the motherboard to fix this seems to be a bit nonsense to me to be honest. what does the partition table have anything to do with the motherboard?
if only there would be a .kdz format custom rom which factory resets the internal sd card during the flash process and maybe fixes the bootloader somehow, that might be the solution.
yes i did the same and the only solution was to replace the motherboard. we need a sowftware that can reach to the emmc in low-level. like omap flasher. but we also need the correct drivers which doesn't exist yet.
crime_of_heart said:
yes i did the same and the only solution was to replace the motherboard. we need a software that can reach to the emmc in low-level. like omap flasher. but we also need the correct drivers which doesn't exist yet.
Click to expand...
Click to collapse
i don't know what the emmc is, i need to do research on that. but i still think that replacing the motherboard won't solve this issue because it seems non relevant to me. i messed up with the vold.fstab file. but after that it worked fine. i mean the internal and external cards swapped just fine. only after i decided to make a nandroid backup using rom toolbox all hell broke loose. i plan to wait a couple of days before turning the phone to LG service. i believe someone will come up with an idea.
yardım etmeye çalıştığın için teşekkür ederim bu arada
Well, there´s a new recovery for the O3D, v5.0.2.7 (I got it with ROM Manager).
It fixes 2 bugs of the previous (5.0.2.0) version: now the USB mass storage option in the mounts menu works (mount external SDCARD), and we can use ADB while in recovery. That way we can fix stuff in the phone filesystem while in recovery: we can now use ADB shell, or ADB push to replace files.
The problem is that I don´t know how to flash it to the phone while in the stock recovery. If someone can guide me on creating a signed ZIP containing this new recovery, flashable in the stock recovery, I would be glad to do that and post it here. I think these phones of you guys can be fixed using this method!
Marcovecchio said:
Well, there´s a new recovery for the O3D, v5.0.2.7 (I got it with ROM Manager).
It fixes 2 bugs of the previous (5.0.2.0) version: now the USB mass storage option in the mounts menu works (mount external SDCARD), and we can use ADB while in recovery. That way we can fix stuff in the phone filesystem while in recovery: we can now use ADB shell, or ADB push to replace files.
The problem is that I don´t know how to flash it to the phone while in the stock recovery. If someone can guide me on creating a signed ZIP containing this new recovery, flashable in the stock recovery, I would be glad to do that and post it here. I think these phones of you guys can be fixed using this method!
Click to expand...
Click to collapse
Great news! But now i need to find a way to install the new CWM. Just as you said i believe what i need is to find or make a .kdz update which includes this new CWM.
What do you think?
I know this is possible, at least for the Galaxy Ace: I have a ZIP file for this device with a custom recovery image, flashable in stock recovery!
To make one for the Optimus 3D, I need to know the following:
- How can I obtain the .IMG of the new recovery? I have found some temp files in clockworkmod folder in my sdcard. The creation date of one of them matches the exact moment I upgraded my recovery, and the file size also matches a recovery image: 5.54MB. Is it the recovery image? Can I just rename it to recovery.img? How can I extract it to ensure it´s ok?
- After I get the recovery image, I can use the Galaxy Ace ZIP as the base to build the O3D zip file. Any help on what do I have to change to make it work correctly?
I also tried this:
http://forum.xda-developers.com/showthread.php?t=1244490
I starts just fine but get's stuck on the "RESET" command, after a while it gives "DOWNLOAD FAIL!" error. I think the phone is supposed to restart automatically but it doesn't. Manually resetting the phone doesn't work either.
I'm about to pull my hair out...
Edit: I'm 99% sure that this isn't a hardware related problem. And LG's software not being able to turn the phone to stock is totally [email protected]#$%!
On some "unbrick your optimus 3d" threads i came across this image:
http://attachments.xda-developers.com/attachment.php?attachmentid=667470&d=1311752328
i tried all methods around here but not once i came across a screen like it. weird...
well i give up guys. so much technical [email protected] going on and no one seems to understand this device enough. i'll turn it to the LG Repair Service today. Thank you everyone for your help...
I've recently flashed vjs ROM below to my old desire.
http://forum.xda-developers.com/showthread.php?p=40191064
I've just got a new 8gb class 6 SD card to upgrade from old smaller class 2.
I think the apps for this ROM are installed to my SD card in some way.
Any tips how I can easily upgrade from old to new SD? I was thinking some kind of sector based copying technique could save me reinstalling ROM and apps? Or am I better to simply plug in new SD card, re flash ROM and reinstall apps?
Thanks in advance
Buzzlightyear2 said:
I've recently flashed vjs ROM below to my old desire.
http://forum.xda-developers.com/showthread.php?p=40191064
I've just got a new 8gb class 6 SD card to upgrade from old smaller class 2.
I think the apps for this ROM are installed to my SD card in some way.
Any tips how I can easily upgrade from old to new SD? I was thinking some kind of sector based copying technique could save me reinstalling ROM and apps? Or am I better to simply plug in new SD card, re flash ROM and reinstall apps?
Thanks in advance
Click to expand...
Click to collapse
when you flashed the rom do you remeber typing these commands into terminal emulator:
su
a2sd install
Y
N
Y
Yes exactly right
Buzzlightyear2 said:
Yes exactly right
Click to expand...
Click to collapse
ok that means that your apps are on the sd.
Which recovery do you have right now? and are you s-off?
Yes S off with clockwork recovery v5.0.2.0
Dont think it is significant but thought I'd mention that I did partition the old SD card when I had cyanogen 7 flashed to get more space for apps. I do not know if this partition still exists and if it is in use...I don't think so since I followed instructions for vjs 4.2.2 ROM.
I find partitions with android bit confusing which is frustrating as I've done it with Windows PCs for years
Buzzlightyear2 said:
Dont think it is significant but thought I'd mention that I did partition the old SD card when I had cyanogen 7 flashed to get more space for apps. I do not know if this partition still exists and if it is in use...I don't think so since I followed instructions for vjs 4.2.2 ROM.
I find partitions with android bit confusing which is frustrating as I've done it with Windows PCs for years
Click to expand...
Click to collapse
your partition is still there and its in use (all your app are on it). This is what you should do:
1. Install 4ext recovery (much better for the desire than clockwordmod). Go here: http://www.4ext.net/ Download the apk and install it to your phone. Then open the app and donwload/install the new recovery
2. boot into recovery, go to backup | restore, and choose backup
3. after its done reboot your phone
4. Take your old sd out of the phone, and put your new one in. Then follow this guide to partition the new sd: http://forum.xda-developers.com/showthread.php?t=2125513 (use the 4ext method and start at step [4])
5. Once its done reboot the phone.
6. Now put your old sd card into your pc, and copy all of the files onto the pc into a folder.
7. Take out your old sd card, and put the new one in. Then copy all the files over onto the new sd.
8. Put your new sd card into the phone, and boot into recovery.
9. Go to backup|restore and choose restore. Then select the backup.
10. reboot and your done.
Really appreciate your help. Will give that a shot and report back.
Thanks again
chromium96 said:
1. Install 4ext recovery (much better for the desire than clockwordmod).
Click to expand...
Click to collapse
Great tool...just bought the paid version
A littlebit off topic here, but I am also using that rom. Have been for 2 days now. How long have you been using it and have you had any issues with stability.
To the other guy what is the difference between cwm recovery and ext4 and why is it better for the desire if you don't mind me asking
Kind regards
Sent from my DLR_MID using xda app-developers app
Buzzlightyear2 said:
Great tool...just bought the paid version
Click to expand...
Click to collapse
Yeah its a great recovery. Lots of useful options.
Did everything else work out OK?
---------- Post added at 06:48 PM ---------- Previous post was at 06:37 PM ----------
bozie said:
A littlebit off topic here, but I am also using that rom. Have been for 2 days now. How long have you been using it and have you had any issues with stability.
To the other guy what is the difference between cwm recovery and ext4 and why is it better for the desire if you don't mind me asking
Kind regards
Sent from my DLR_MID using xda app-developers app
Click to expand...
Click to collapse
i also used that rom for about a month. It was very fast but i kept having random reboots. I ended up switching to the one in my signature. Its not as fast, but in my opinion its more stable, and i'd rather have stability than speed.
4ext is a good recovery because it has a lot of useful features like partitioning the sd (cwm has this too, but its not good), usb unbrick, touchscreen, themeable, one click full wipe, etc... I used to use cwm, and i never had any problems with it, i just recently moved to 4ext and is great.
I have not noticed any reboots as yet, although I will look out for them now lol. Will have a look into that recovery.
Thanks for the advice
Much apreciated
Sent from my DLR_MID using xda app-developers app
bozie said:
A littlebit off topic here, but I am also using that rom. Have been for 2 days now. How long have you been using it and have you had any issues with stability.
Click to expand...
Click to collapse
Couple of random reboots...no worse than cm7.2...I suspect some of reboots and lags I see are due to me not knowing what I was doing partitioning SD plus old slow class 2 SD
chromium96 said:
Did everything else work out OK?.
Click to expand...
Click to collapse
I will complete SD folder backup later when I have access to a pc...will let you know
glad I posted this question...just read excellent partition guide you linked to and also happy with 2 tools (4ext and titanium backup pro) I've learned about and bought. I owe you a beer
Buzzlightyear2 said:
I will complete SD folder backup later when I have access to a pc...will let you know
glad I posted this question...just read excellent partition guide you linked to and also happy with 2 tools (4ext and titanium backup pro) I've learned about and bought. I owe you a beer
Click to expand...
Click to collapse
Lol no need. Just press thanks
OK I partitioned new 8gb SD with 1024mb ext1 no ext2 and no swap. The remaining was fat32. Now I can plug SD card in adapter in windows PC and copy all files from old card to new sd, plug new sd into phone, boot to recovery...but no backup to restore! all the files I copied to the root of SD in windows (inc my nandroid backup) are not visible so I cannot restore my nandroid backup! In recovery all I can see is a folder called 4ext (using apply zip functionality simply to see if I can view files)
Plugging new SD back into windows I can see all the files again!
Buzzlightyear2 said:
OK I partitioned new 8gb SD with 1024mb ext1 no ext2 and no swap. The remaining was fat32. Now I can plug SD card in adapter in windows PC and copy all files from old card to new sd, plug new sd into phone, boot to recovery...but no backup to restore! all the files I copied to the root of SD in windows (inc my nandroid backup) are not visible so I cannot restore my nandroid backup! In recovery all I can see is a folder called 4ext (using apply zip functionality simply to see if I can view files)
Plugging new SD back into windows I can see all the files again!
Click to expand...
Click to collapse
If you boot into android and use a file manager can it see the files?
chromium96 said:
If you boot into android and use a file manager can it see the files?
Click to expand...
Click to collapse
No.
When I copied files from old SD to windows the PC windows would not recognise the SD directly so I put old sd in phone, booted android then turned on usb storage and copied via usb phone cable.
Windows recognised new SD so I plugged SD card into PC directly (not using phone) to copy files to new card.
I suspect this process may be the problem but do not understand why.
Copied files via USB to phone with new SD card and then restored nandroid...seems to have worked but lags I hoped would be fixed with faster class 6 card still there bit a bit better.
Thanks for all your help