Hello, sry if this has already been askedbut I'm a noob so... Untill now I had cyanogenmod 7.1 on my sensation and i wanted to switch to OpenSensation but I needed to install the latest firmware for that! So I tried doing what they said on theandroidsoul.com/how-to-flash-pg58img-zip-ics-firmware-on-htc-sensation/ but had no success. Now every time i try to start the phone it just gets stuck at the cyanogenmod9 boot animation! I tried restoring from NANDroid backup but then it gets stuck on the cyanogenmod7 boot animation!
If anyone could help me fix this I'd be very grateful!
EDIT: I also can't install cyanogenmod 7.1 again!
mankiboss said:
Hello, sry if this has already been askedbut I'm a noob so... Untill now I had cyanogenmod 7.1 on my sensation and i wanted to switch to OpenSensation but I needed to install the latest firmware for that! So I tried doing what they said on theandroidsoul.com/how-to-flash-pg58img-zip-ics-firmware-on-htc-sensation/ but had no success. Now every time i try to start the phone it just gets stuck at the cyanogenmod9 boot animation! I tried restoring from NANDroid backup but then it gets stuck on the cyanogenmod7 boot animation!
If anyone could help me fix this I'd be very grateful!
Click to expand...
Click to collapse
more details please
complete HBOOT details
also if you have adb/fastboot installed
then post the output of this command except imei and serial number
fastboot getvar all
once you post the output
then we can guide you further
S-OFF, HBOOT-1.27.1100, RADIO-10.14.9035.01_M
C:\Users\Roncevic\Downloads\ADB_Fastboot_Windows>fastboot getvar all
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 10.14.9035.01_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.45.531.1
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__032
INFObattery-status: low
INFObattery-voltage: 3497mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.491s
C:\Users\Roncevic\Downloads\ADB_Fastboot_Windows>
mankiboss said:
S-OFF, HBOOT-1.27.1100, RADIO-10.14.9035.01_M
C:\Users\Roncevic\Downloads\ADB_Fastboot_Windows>fastboot getvar all
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 10.14.9035.01_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.45.531.1
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: HTC__032
INFObattery-status: low
INFObattery-voltage: 3497mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.491s
C:\Users\Roncevic\Downloads\ADB_Fastboot_Windows>
Click to expand...
Click to collapse
thanks that explains what caused the problem
I'll try to explain it briefly
now typically our sensation can be broken into three parts like (it may not be 100% correct but its an analogy to explain the firmware things)
hardware/device ---------------->>> firmware(HBOOT + radio) --------------------->>>ROM (ICS/GB)
so for it to run properly
you need to have GB firmware for GB rom (GB- ginger bread)
or ICS firmware for ICS rom
otherwise it wont work
now in your case
you hboot is 1.27.1100 (ICS one) but the radio is still of GB one (10.14.xx)
and
from "INFOversion-main: 1.45.531.1" this we can say that you are running a GB os ..and i think its cm7.1 that you restored
now you might have understood why you are looping
your firmware upgrade is half complete ( 1 part is of ICS one and other is of GB one)
and you are running GB rom..which wont work
so now you have two ways out
1.to have cm9 (ICS rom)
you need to properly flash the 3.32 firmware first (ICS compatible)
that you can find it here (get the universal 3.32 firmware )
universal firmwares
then flash the cm9 via recovery ..voila you are done
(for safe side you can check you flashed fw properly or not ...hboot should be 1.27.xx and radio should be 11.xx )
2.to have back the cm7.1 (GB rom)
here you need to flash the GB firmware
get the universal 1.17 firmware from the above linked thread and flash it
(verify the 1.17 firmware by looking at hboot (1.17.xx) and radio (10.xx))
then restore you cm7.1 backup ..and you are done again
NOTE: remember to remove the PG58IMG zip file from sdcard after flashing otherwise you cant go into bootloader/fastboot
What he said do that as well you might want to get supercid it makes things easier...
Swyped From My Sensation.
I tried doing what you said but i it says wrong CID and sometimes battery voltage too low! If i really got the wrong file how can i put the right file on the SD card with fastboot or sth and do I need to change the battery? thx
mankiboss said:
I tried doing what you said but i it says wrong CID and sometimes battery voltage too low! If i really got the wrong file how can i put the right file on the SD card with fastboot or sth and do I need to change the battery? thx
Click to expand...
Click to collapse
get the 3.32 universal firmware (NON TMOUS) one and flash it
if you want gingerbread rom flash the 1.17 universal firmware (NON TMOUS one)
firmware thread
that should solve your wrong cid problem
if it still persists
then do a supercid
commands to supercid
1.fastboot getvar cid (store/remember your original cid)
2.fastboot oem writecid 11111111 (eight ones)
3.fastboot reboot-bootloader
4.fastboot getvar cid (verify your cid now)
I did the superCID but it still says battery voltage too low. Do I have to change the battery?
mankiboss said:
I did the superCID but it still says battery voltage too low. Do I have to change the battery?
Click to expand...
Click to collapse
of course you need to charge the battery
if while doing firmware upgrade ..your phone got switched off ..due to less battery ..it can potentially lead to a brick
ALWAYS when flashing a firmware ..you need to have enough battery (atleast 40-50% imho)
Related
Can someone please help, I'm truly stuck here.
I have followed the guide here..
http://forum.xda-developers.com/showthread.php?t=1460713
I have managed to remove the revolutionary logo, and all was good. I then attempted to install the following RUU...
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.0805U_38.03.02.11_M_release_177977_signed
Went through all the prompts but the program "hung" at the sending screen. After around an hour I pulled the usb cable, yay the phone still boots. However I was still at the old HBOOT (cant remember the numbers 6.0.0002 or something ) and with the custom rom.
Though this might be a problem with the RUU... NAY.
I have since tried he following..
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_O2_UK_1.31.206.1_Radio_20.28b.30.0805U_38.03.02.14_M_release_178935_signed
All with the same results.
So I downgraded the hboot manually to 0.98.0002 and tried them all again. Still no luck.
The reason I have tried the different RUU is that it was originally from carphone warehouse. Their phones are generally unbranded so assumed it would be a standard euro ruu.
Please help.
Think I might have posted this in the wrong section, so will repost in the general forum. Sorry.
The section is right. The problem is strange, though.
If it was wrong RUU, it wouldn't hang, it would just refuse the flash with error.
Thats what I was thinking, just to be sure I have used "fastboot getvar all" and it reports version-main: 1.28.401.1.
So the euro ruu should work fine.
Could it be that I'm coming from cyanogen? Would flashing anothe rom, then attempting again fix the issue?
Also It doesn't actually hang in the sense it becomes unresponsive. It says "sending ........." the dots keep reaching the end then starting again if that makes sense
Also the phone is stuck at the black htc logo whilst this is happening. When the usb cable is removed, it goest back to bootloader with only "ruu" displayed.
Just noticed also that when running the ruu, any of them. It reports the current software as version-main: 1.36.841.3. Really confused as the only ruu I can find to match this is...
RUU_Saga_Telstra_WWE_1.36.841.3_Radio_20.28d.30.0805U_3805.04.02.01_M_release_184558_signed.exe
this is really starting to bug me now, have tried the above ruu and still no dice. I have flashed to cyanogen, and the stock prerooted roms. Still same problem.
Can anyone help!! Got to return the phone in 2 days to carphone due to a faulty speaker
INFOversion: 0.5
INFOversion-bootloader: 0.98.2000
INFOversion-baseband: 38.03.02.11
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.401.1
INFOserialno: HT13Jxxxxxxxx
INFOimei: 3550670xxxxxxxxx
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4136mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: ENG
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7b851d36
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.031s
Can someone please help, I'm truly stuck here.
I have followed the guide here..
http://forum.xda-developers.com/show....php?t=1460713
I have managed to remove the revolutionary logo, and all was good. I then attempted to install the following RUU...
RUU_Saga_HTC_Europe_1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11_M_release_177977_signed
Went through all the prompts but the program "hung" at the sending screen. After around an hour I pulled the usb cable, yay the phone still boots. However I was still at the old HBOOT (cant remember the numbers 6.0.0002 or something ) and with the custom rom.
Though this might be a problem with the RUU... NAY.
I have since tried he following..
RUU_Saga_HTC_Europe_1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03_M_release_199410_signed
RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30. 0822U_3822.10.08.04_M_release_219480_signed
RUU_Saga_O2_UK_1.31.206.1_Radio_20.28b.30.0805U_38 .03.02.14_M_release_178935_signed
All with the same results.
So I downgraded the hboot manually to 0.98.0002 and tried them all again. Still no luck.
The reason I have tried the different RUU is that it was originally from carphone warehouse. Their phones are generally unbranded so assumed it would be a standard euro ruu.
Please help.
I really don't get what the problem is. Removing the "Revolutionary" logo isn't the same as being S-ON. But check out the link below to see if it helps.
forum.xda-developers.com/showthread.php?t=1549636
@pttynan
PLease run the fastboot command "fastboot getvar all" remember to remove your imei and serial from your post.
Then I will direct you to a solution
foX2delta said:
@pttynan
PLease run the fastboot command "fastboot getvar all" remember to remove your imei and serial from your post.
Then I will direct you to a solution
Click to expand...
Click to collapse
Hi Fox2delta. The command gives the following.
INFOversion: 0.5
INFOversion-bootloader: 0.98.2000
INFOversion-baseband: 38.03.02.11
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.401.1
INFOserialno: HT13Jxxxxxxxx
INFOimei: 3550670xxxxxxxxx
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4136mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: ENG
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7b851d36
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
finished. total time: 0.031s
Dont suppose anyone has any thoughts on this? Carphone flat out refused to touch it once the noticed S-OFF
hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!
yuzhi92 said:
hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!
Click to expand...
Click to collapse
Go to fastboot on your device
Connect it to pc (usb debugging enable is not required) (phone reads fastboot usb)
Then go to your adb folder on pc
And Type this
fastboot getvar all
Post the complete output except imei and serial number
I'll guide you through the process after this
Sent from my pyramid.. Through blazing fast sonic waves
Just download the latest RUU for your device and run it
Yeah do that lol u can get ur ruu from file factory
Sent from my HTC One S using xda premium
[SOLVED] OP's problem was solved on the irc over 5 hours ago.
Stuck in the same boot loop with my htc sensation
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
reresp same
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
What is the last rom you had?
You can still go to bootloader thus you can go to recovery...
So enter recovery and tell me whether you are able to e ter or not
Sent from my pyramid.. Through blazing fast sonic waves
w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
You mean you succesfully flashed RUU and still can't boot?
Sent from my pyramid.. Through blazing fast sonic waves
xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
Flash an ICS ROM. Your GB ROM will not boot on 3.32 firmware.
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
I need a better description of the problem.
"It doesn't work" "I tried multiple RUUs" are useless to me.
What happens when you flash the RUU? Is it successful?
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.53
INFOserialno: SH19sdsdf
INFOimei: 35831gsdgsdfg
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3927mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
I had to s-off this thing with a lot of difficulties, but i still have the bootlooping prob, even after gettign the s-off and super cidd it..
doesnt matter which rom i am using i bootloop, i used a miuiv5 rom for 4 days wihtout bootloop, but then suddenly it started looping badly..
i flashed this file recently (RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed ) still it loads to htc splash screen and then restart..
dxbboy said:
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.53
INFOserialno: S************
INFOimei: 3************
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3927mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
I had to s-off this thing with a lot of difficulties, but i still have the bootlooping prob, even after gettign the s-off and super cidd it..
doesnt matter which rom i am using i bootloop, i used a miuiv5 rom for 4 days wihtout bootloop, but then suddenly it started looping badly..
i flashed this file recently (RUU-Pyramid-ICS-hTC-Europe-3.33.401.53-Radio-11.76A.3504.00U-11.24A.3504.31-M-release-280871-signed ) still it loads to htc splash screen and then restart..
Click to expand...
Click to collapse
since you are on S-OFF and supercid try to install a gb ruu.exe
also remove your imei and serial number
got confused finding the gb RUU .. i found RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe i am trying this thinking its a gb rom, and 401.1 is my orginal mid and cid i had .. ..
dxbboy said:
got confused finding the gb RUU .. i found RUU_Pyramid_HTC_Europe_1.35.401.1_Radio_10.43a.9007.00U_10.51.9007.27_M3_release_198179_signed.exe i am trying this thinking its a gb rom, and 401.1 is my orginal mid and cid i had .. ..
Click to expand...
Click to collapse
it is a gb ruu.exe
ok here is the log, i flashed the ruu mentioned above and now i dont move ahead of htc logo, after that a blackscreen comes, how do i move ahead..
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.17.0011
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.35.401.1
INFOserialno: SH1gfsdgsdf
INFOimei: 35831sdfgsdfgs
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3800mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 92e53710
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
rzr86 said:
it is a gb ruu.exe
Click to expand...
Click to collapse
now that i flashed the RUU, how do i install
1. 4ext recovery that i was having earlier
2. can my 10.2cm rom or above 9cm work after the flashed RUU ?
dxbboy said:
now that i flashed the RUU, how do i install
1. 4ext recovery that i was having earlier
2. can my 10.2cm rom or above 9cm work after the flashed RUU ?
Click to expand...
Click to collapse
man i think that something goes wrong with a parittion of your device
lets try this
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
before flashing check md5 sums(important)
use md5 checker to ckeck it(it is an exe for pc)
after that install 4ext recovery from here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2 nothing else)
then put the cm rom in your sdcard and flash it from 4ext
best wishes
rzr86 said:
man i think that something goes wrong with a parittion of your device
lets try this
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instructions to the letter
before flashing check md5 sums(important)
use md5 checker to ckeck it(it is an exe for pc)
after that install 4ext recovery from here
http://forum.xda-developers.com/showthread.php?t=1631861 (only step 2 nothing else)
then put the cm rom in your sdcard and flash it from 4ext
best wishes
Click to expand...
Click to collapse
i flashed the universal .. and now this is the log.. i will try to install the recovery now .. lets see..
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 11.24A.3504.31_
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: SH1asdf
INFOimei: 358313asdf
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4015mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Flashed the recovery.. now installing the ROm .. IMPORTANT question .. after flashing the gb ruu , in my bootloader.. instead of locked or reloacked or unlocked.. it shows firmware 3.33 :S
dxbboy said:
i flashed the universal .. and now this is the log.. i will try to install the recovery now .. lets see..
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: 11.24A.3504.31_
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.33.401.106
INFOserialno: SH1asdf
INFOimei: 358313asdf
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4015mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Flashed the recovery.. now installing the ROm .. IMPORTANT question .. after flashing the gb ruu , in my bootloader.. instead of locked or reloacked or unlocked.. it shows firmware 3.33 :S
Click to expand...
Click to collapse
it is the patched hboot which you can use whatever fastboot command you want(you are not limited)
besides you need it to flash 4ext via fastboot command
rzr86 said:
it is the patched hboot which you can use whatever fastboot command you want(you are not limited)
besides you need it to flash 4ext via fastboot command
Click to expand...
Click to collapse
yes i installed the 4ext recovery .. installed the 10.2cm ROm ..it booted firm time without a single loop.. but it says baseband unknown in the settings :S .. hope i can play around with this one a bit ..
thanks .. will let you know if another problem occours
dxbboy said:
yes i installed the 4ext recovery .. installed the 10.2cm ROm ..it booted firm time without a single loop.. but it says baseband unknown in the settings :S .. hope i can play around with this one a bit ..
thanks .. will let you know if another problem occours
Click to expand...
Click to collapse
baseband unknown hmm,
if you have good signal don't change nothing
glad for you mate
rzr86 said:
baseband unknown hmm,
if you have good signal don't change nothing
glad for you mate
Click to expand...
Click to collapse
BOOTLOOP alert!!
well for the first time it booted the best it ever had.. but i powered off my phone , then repowerd it .. and bammmm again bootlop
dxbboy said:
BOOTLOOP alert!!
well for the first time it booted the best it ever had.. but i powered off my phone , then repowerd it .. and bammmm again bootlop
Click to expand...
Click to collapse
try to flash the boot.img of the rom via fastboot command
rzr86 said:
try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
is it really required as i am already s-off?
plus i tried previously smartflash..
rzr86 said:
try to flash the boot.img of the rom via fastboot command
Click to expand...
Click to collapse
cannot boot ahead of any roms splash screen htc comes, then the startup logo of the rom and bootloop
nops tried all.. havent seen the homescreen yet
dxbboy said:
is it really required as i am already s-off?
plus i tried previously smartflash..
Click to expand...
Click to collapse
dxbboy said:
cannot boot ahead of any roms splash screen htc comes, then the startup logo of the rom and bootloop
nops tried all.. havent seen the homescreen yet
Click to expand...
Click to collapse
i think something goes wrong with boot partition
also disable smartflash. you are on S-OFF
you don't need it
all i can say now is play with different roms and see how they go
but try this first
boot to the bootloader and select reboot
if it fails then boot to recovery
wipe dalvik + cache and then reboot
best wishes
rzr86 said:
i think something goes wrong with boot partition
also disable smartflash. you are on S-OFF
you don't need it
all i can say now is play with different roms and see how they go
but try this first
boot to the bootloader and select reboot
if it fails then boot to recovery
wipe dalvik + cache and then reboot
best wishes
Click to expand...
Click to collapse
nope tried this already .. with cm10 ,cm 9, miui v5, and others..i flashed the superwipe from 4ext aswell but just cant get pass the splash screen of the rom
dxbboy said:
nope tried this already .. with cm10 ,cm 9, miui v5, and others..i flashed the superwipe from 4ext aswell but just cant get pass the splash screen of the rom
Click to expand...
Click to collapse
don't use any superwipe script
use the format all partitions except sdcard option from 4ext
Remove the supercid and try to boot.. Change cid to something generic like HTC__001 (two underscores)
Command Is
fastboot oem writecid HTC__001
Sent from my HTC Sensation using XDA Premium 4 mobile app
Facing same problem... tried all the available solutions but still no luck..
device goes into never ending boot loop and unable to boot recovery from any method... Also installed RUU and it finished successfully but the phone does not want to wake up...
please help...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please someone help!! i have broken my phone bigtime, I unlocked the bootloader the official way and no it will not recognize the sim and wont let me connect to any network!!
any thoughts?
thanks
sounds like radio problem, try to get an app getRIL to match radio with your kernel
ferriscat said:
Please someone help!! i have broken my phone bigtime, I unlocked the bootloader the official way and no it will not recognize the sim and wont let me connect to any network!!
any thoughts?
thanks
Click to expand...
Click to collapse
i think maybe you're already updating incorrect hboot firmware from that site..
to make sure that..just go to your bootloader again and select FASTBOOT..then type fastboot command "fastboot getvar all"..then posting it in here the output from that command..but don't forget to remove your serial number and imei first..to avoid someone can cloning your phone..
JJeamy said:
i think maybe you're already updating incorrect hboot firmware from that site..
to make sure that..just go to your bootloader again and select FASTBOOT..then type fastboot command "fastboot getvar all"..then posting it in here the output from that command..but don't forget to remove your serial number and imei first..to avoid someone can cloning your phone..
Click to expand...
Click to collapse
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
ferriscat said:
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
Click to expand...
Click to collapse
use a ruu.exe
choose the one which corresponds to your firmware(or higher) and cid
http://forum.xda-developers.com/showthread.php?t=1672425
before use the ruu.exe relock first the bootloader
edit: probably there is no ics ruu for orange UK
RUU not working
rzr86 said:
use a ruu.exe
choose the one which corresponds to your firmware(or higher) and cid
http://forum.xda-developers.com/showthread.php?t=1672425
before use the ruu.exe relock first the bootloader
edit: probably there is no ics ruu for orange UK
Click to expand...
Click to collapse
Hi I tired the RUU late last night,
i tired a bout 5 and none of them worked error 131 and error 140,
is there a way to compleaty wipe it all and start again?
thanks
ferriscat said:
Hi I tired the RUU late last night,
i tired a bout 5 and none of them worked error 131 and error 140,
is there a way to compleaty wipe it all and start again?
thanks
Click to expand...
Click to collapse
i can only think now to do a factory reset from settings
rzr86 said:
i can only think now to do a factory reset from settings
Click to expand...
Click to collapse
Hi thanks for trying,
i tried factory reset still no luck, i think the only thing i can do it try get a complete new rom on it.. just got to work out how.
thanks
ferriscat said:
Hi thanks for the reply ,
here it is,
INFOversion: 0.5
INFOversion-bootloader: 1.27.0000
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.61.51
INFOserialno:
INFOimei:
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813000
INFOcidnum: ORANG001
INFObattery-status: good
INFObattery-voltage: 3997mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
Being pretty new, I would hazard a guess at having no baseband being the issue?
please advise thanks
Click to expand...
Click to collapse
yap i think that you had already had wrong step..to unlocking your bootloader via htcdev.com...
to fix that...maybe you can try relocking your bootloader first...then flashing a stock RUU again..
but to do that..because i can't find the right RUU for you that have a same version as yours...you can download this RUU (this is a ruu for sensation xe) then modified that RUU file (i mean modified/ change the cid info on android-info.txt in PG58IMG.zip file..change it to your cid) or making a goldcard first to flashing that RUU or else that have a same or higher version than yours...
completed guide to flashing a RUU you can read here.. (you can read at step 4 in that thread)
JJeamy said:
yap i think that you had already had wrong step..to unlocking your bootloader via htcdev.com...
to fix that...maybe you can try relocking your bootloader first...then flashing a stock RUU again..
but to do that..because i can't find the right RUU for you that have a same version as yours...you can download this RUU (this is a ruu for sensation xe) then modified that RUU file (i mean modified/ change the cid info on android-info.txt in PG58IMG.zip file..change it to your cid) or making a goldcard first to flashing that RUU or else that have a same or higher version than yours...
completed guide to flashing a RUU you can read here.. (you can read at step 4 in that thread)
Click to expand...
Click to collapse
or see here
http://forum.xda-developers.com/showthread.php?t=1631861
No Ril
rzr86 said:
or see here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
So ive tired the above and still no luck , the phone is rooted and is s-off now, after further investigation and using GetRil It is saying I have no RIL , is there an easy way to install it? I thought installing a new rom would do all that?
thanks
ferriscat said:
So ive tired the above and still no luck , the phone is rooted and is s-off now, after further investigation and using GetRil It is saying I have no RIL , is there an easy way to install it? I thought installing a new rom would do all that?
thanks
Click to expand...
Click to collapse
take a look at this thread
http://forum.xda-developers.com/showthread.php?t=1202867