Related
Hello falks..
my HTC one x phone won't respond ..
this happened when I maybe disabled one of the system features by the Carot app ..
Now when I open the phone, I get a BLANK screen .. and I can't access any of the phone features .. and when I press the power button, it just restart and the same thing happen again and again.
I couldn't upgrade the system through my computer, because when I plug it, it says CHARGE only ! and I can't change it.
ssiiggaa said:
Hello falks..
my HTC one x phone won't respond ..
this happened when I maybe disabled one of the system features by the Carot app ..
Now when I open the phone, I get a BLANK screen .. and I can't access any of the phone features .. and when I press the power button, it just restart and the same thing happen again and again.
I couldn't upgrade the system through my computer, because when I plug it, it says CHARGE only ! and I can't change it.
Click to expand...
Click to collapse
Can you get into TWRP?
Hold the power button for ~10-15 seconds (lights should start flashing) and hold down volume down.
You can let go of power when you see the HTC screen, but not volume down
absolutelygrim said:
Can you get into TWRP?
Hold the power button for ~10-15 seconds (lights should start flashing) and hold down volume down.
You can let go of power when you see the HTC screen, but not volume down
Click to expand...
Click to collapse
yes, I was able to do so. But what should I do NEXT ?
ssiiggaa said:
yes, I was able to do so. But what should I do NEXT ?
Click to expand...
Click to collapse
What ROM were you on? I suggest reflashing the ROM.
don't forget to flash the boot.img, then the ROM
absolutelygrim said:
What ROM were you on? I suggest reflashing the ROM.
don't forget to flash the boot.img, then the ROM
Click to expand...
Click to collapse
It worked.. Thank YOU :good:
ssiiggaa said:
It worked.. Thank YOU :good:
Click to expand...
Click to collapse
there's a button for that :crying:
Hi everyone,
I'm trying to flash a custom ROM, and every method requires me to unlock the bootloader via HTCdev, but I have two problems:
1) I can't boot into bootloader. When I hold power + volume-down, the phone boots into safe mode (I don't think that's normal right?). I took care of this by using adb and (adb reboot bootloader) to get into the bootloader.
2) When I'm in the bootloader, the power button (to make any selections) doesn't work. So I'm always stuck at the last screen that says "Unlock bootloader?" and I just have to select "yes" with the power button, but I simply can't!
Does anyone know how I can get the bootloader to work normally, or get my power button to work when I'm in fastboot?
Thanks in advance!
Did you get around this? I keep having the same issue!
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
Mile_zdr said:
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
Click to expand...
Click to collapse
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Nicx59 said:
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Click to expand...
Click to collapse
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Mile_zdr said:
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Click to expand...
Click to collapse
with power button you are selecting
-deleted-
Pleas help - same problem
Mile_zdr said:
-deleted-
Click to expand...
Click to collapse
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Berkaypkk said:
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Click to expand...
Click to collapse
Did you have this screen on your phone?
Mile_zdr said:
Did you have this screen on your phone?
Click to expand...
Click to collapse
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Berkaypkk said:
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Click to expand...
Click to collapse
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Mile_zdr said:
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Click to expand...
Click to collapse
Volume up works but the power button doesnt
I'm also stuck in this screen for the past week, I got this phone for free, but now I want to root it but I'm stuck in this screen. I've tried several tools like kgs1992utility, hasoon2000's utility, even the windroid tool for htc sensation, but somehow I simply cannot get passed this screen. Is there any adb commands to replace the power button to select?
only the volume down button works, but it works in the opposite way(ex volume down actually takes you up not down) -__-
cant finish power button will not select yes
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Hotrodanimal said:
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Click to expand...
Click to collapse
So I had the exact same issue. I pressed the power button and volume down together and the phone rebooted back into the bootloader, this time it says *** UNLOCKED*** at the top of the screen.
SF
Hi,
really need help...I was about to sold my old HTC Sensation XE, rooted and had viper 5.2.1 on it - deleted everything from SD card, but wanted to be sure nothing remained on my phone so I made factory reset (i think I shouldn't to this)..
Now when I turn phone On it loads HTC logo, then Viper logo and restarts and then again HTC, Viper restart...
When I hold power button + vol.down nothing happens (HTC->Viper and restart) + all the buttons are flashing...
Did I bricked my phone for good or is there a way how to reflash everything?
Thanks
hawkeeyee said:
Hi,
really need help...I was about to sold my old HTC Sensation XE, rooted and had viper 5.2.1 on it - deleted everything from SD card, but wanted to be sure nothing remained on my phone so I made factory reset (i think I shouldn't to this)..
Now when I turn phone On it loads HTC logo, then Viper logo and restarts and then again HTC, Viper restart...
When I hold power button + vol.down nothing happens (HTC->Viper and restart) + all the buttons are flashing...
Did I bricked my phone for good or is there a way how to reflash everything?
Thanks
Click to expand...
Click to collapse
v u puled out the battery.....
if not helped then flash recovery through fastboot and then flash viper rom again
is this possible when Im not able to access HBOOT menu or do anything with power + vol down?
hawkeeyee said:
is this possible when Im not able to access HBOOT menu or do anything with power + vol down?
Click to expand...
Click to collapse
Like said above, pull out the battery for 10 seconds n put back in then ul be able to boot into bootloader with vol down + power
didn't helped
hawkeeyee said:
didn't helped
Click to expand...
Click to collapse
U must be doing it wrong or ur volume button is dodgy. Ur phone being in a bootloop should not affect getting into bootloader once uv pulled the battery.
I'm sure it was working before (my girlfriend used it a never told me she is not available to lower the sound)
why are bottom buttons flashing while holding power + vol down?
hawkeeyee said:
I'm sure it was working before (my girlfriend used it a never told me she is not available to lower the sound)
why are bottom buttons flashing while holding power + vol down?
Click to expand...
Click to collapse
I dunno, mine does that if im in a bootloop n i try a hard reset. Dont worry. The vol button mite work but she mite just need to give it an extra push, no harm in cleaning it coz the sensations r bad for dust getting in there. K pull the battery out for a min n put back in then press and hold vol down (hard) and press n hold power button. U should get to bootloader, keep trying till u do. As long as u pull the battery out u should get there at some point.
Sometimes I also have to pull the battery out twice to make it go into bootloader. Just make sure you have enough charge in the battery too.
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
hawkeeyee said:
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
Click to expand...
Click to collapse
Dunno bud should work. U can try adb commands but dunno if that will work tho. So boot ur phone normaly and when its at boot animation, plug in ur phone to pc and open command window n type
adb reboot recovery
hawkeeyee said:
no luck... tried it around 20 times and nothing... communication via fastboot is not working..
so I guess there is no other way how to enter recovery as vol down and power
?
Click to expand...
Click to collapse
try this
switch the phone normally
when you see the htc logo or the viper logo type the command adb reboot bootloader
have your device already connected
error: device not found
drivers for win installed, when phone is powered off I can see him in win as removable disk...
asking if I'm doing this as I should:
downloaded Android SDK and made initial set-up as wrote here: http://forum.xda-developers.com/showthread.php?t=2277112
hawkeeyee said:
error: device not found
drivers for win installed, when phone is powered off I can see him in win as removable disk...
asking if I'm doing this as I should:
downloaded Android SDK and made initial set-up as wrote here: http://forum.xda-developers.com/showthread.php?t=2277112
Click to expand...
Click to collapse
Use this tool for fastboot setup
http://forum.xda-developers.com/showthread.php?t=2588979
still same
hawkeeyee said:
still same
Click to expand...
Click to collapse
K, pull the battery out n back in, then leave the battery cover off ur phone and press the vol down button then press n hold the power button (both same time) see if that boots into bootloader.
nope, tried that 30x already
hawkeeyee said:
nope, tried that 30x already
Click to expand...
Click to collapse
what windows OS do you have?
win 7, 64bit
hawkeeyee said:
win 7, 64bit
Click to expand...
Click to collapse
try the latest htc drivers from here
http://forum.xda-developers.com/showthread.php?t=2217396
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Works entrance for the recovery (Vol+ and Vol- and Power)?
rakrakrak said:
Works entrance for the recovery (Vol+ and Vol- and Power)?
Click to expand...
Click to collapse
No bro...
eusagc said:
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Click to expand...
Click to collapse
What happens when you do a Vol up + power?
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
eusagc said:
CloudCompute said:
What happens when you do a Vol up + power?[/QU
The phone "doesn't want to turn off" bro. It has fully discharged, but as soon as I plug the charger in, it immediately powers up. When it does, now it shows the Huawei logo. But it's stuck there, and if I press the power button for a few secs, it will power down, but immediately power up again...
Click to expand...
Click to collapse
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Ok dude, will do. Thanks!
Click to expand...
Click to collapse
CloudCompute said:
eusagc said:
Let it get fully charged first. Then remove the charger and keep the Vol up and power button pressed for ~10 secs or more, and see where it takes you.
Click to expand...
Click to collapse
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
CloudCompute said:
Done bro. Although I must say, I'm kinda back like yesterday when the phone is just helplessly discharging until it drops dead. Pressing vol+ and power restarts the phone, but I'm still stuck at the logo...
Click to expand...
Click to collapse
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
eusagc said:
Hi there,
Kindly help... I successfully installed B512 on my TL10 using force upgrade method, afterwhich I changed recovery to TWRP 3.0.2 using mobopx v2.2, which was also successful. And then I installed SuperSU 2.46 via TWRP, then cleared cache/dalvik. But upon rebooting system, I get a blank screen, even after waiting for more than 15 minutes.
And so I tried going to TWRP (Vol+ and power), which was successful, in order to boot to bootloader, with the intention of loading back the stock bootloader via adb, so that I can force install B512 from my microSD card again. It seemed to install fine...
However, at this point, I cannot reboot to bootloader (Vol- and power) anymore, I only get blank screen. Trying recovery (Vol+ and power) doesn't work either. Rebooting normally gives me the same. I cannot by any means connect via adb now.
Is there any way to unbrick my phone at this point?
Thanks so much. Cheers.
Click to expand...
Click to collapse
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
CloudCompute said:
You seem to be in a sticky situation bro. Your recovery seems to be broken because in stock recovery Vol up + power should ideally take you to recovery and not restart. If you could somehow boot into fastboot mode then it could open up some options to bring your phone to life.
Click to expand...
Click to collapse
That's correct bro. Although it appears from adb that I was able to install the stock recovery, I cannot access it with Vol+ and power.
CloudCompute said:
With no way to connect to the phone the only options left are the hardware buttons. I am sure you'd have tried them already, but just in case you have not, try the other 2 key combinations also, Vol down + power and Vol up + Volume down + power, for ~10 secs, to check if any of these either forces a factory reset or boots the phone into fastboot mode.
Click to expand...
Click to collapse
Yes, I did. And I can't even boot to bootloader after all that... The phone only seems to charge, but is stuck at the logo.
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
stinka318 said:
Go back to stock recovery reflash stock rom make sure you have a unlocked bootloader......all remember that Google is your friend.....
Click to expand...
Click to collapse
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
eusagc said:
Thanks bro, but that's what I did, or at least was planning to do. After rooting B512 via TWRP, the phone got stuck at the logo. And so I tried to install stock recovery, which it did, in order to reflash the stock ROM. But at this point I'm still stuck at the logo, and I can't access recovery and BL anymore. The BL is unlocked right from the start...
Click to expand...
Click to collapse
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
eusagc said:
I'm ready to send this to Huawei's service center. Is there anything more I can do at this point before I do that? Thanks so much.
Click to expand...
Click to collapse
Go ahead, send it to Huawei service centre. They'll have ways to reach the internal memory after opening up the device.
stinka318 said:
Did you try volume down and then plug USB in on computer then command prompt fast boot reboot it may work.
Click to expand...
Click to collapse
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
eusagc said:
Thank you for this suggestion brother. I tried exactly as you described, however, the phone looks badly discharged, and while the screen was blinking/showing the red battery icon, it doesn't seem to want to charge. I waited around 5 minutes, but nothing seems to progress from here.
And so now, I moved the USB cable to a proper charger, and now it seems to be charging, with the LED light a steady red, and the screen the normal red circle with "0%" inside. It seems to be charging at the moment, although I really have to wait until it shows "1%" until I can surely say so.
One thing that's different now is that the phone hasn't turned on (by itself) yet. And at least this looks promising.
I'll let you know what happens in a while... Thank you!
Click to expand...
Click to collapse
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
eusagc said:
Charging's at 4% now... And the phone hasn't turned on so far... Looks promising...
Click to expand...
Click to collapse
All well now?
CloudCompute said:
All well now?
Click to expand...
Click to collapse
I was out of town for the past few weeks and didn't have time to do this. I'm back now and plan to work on this tonight. Thank you bro, I'll let you know how it goes...
Hi,
I have a problem with my Nexus 5, it bootloop on the Google Logo
I try to put a little piece of paper behind the power button and also to click on the power button a lot of times during the boot but it still stuck..
What can I do to try fix it ?
Thanks in advance
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
matgras said:
is this the kind of bootloop where it loops because of a stuck power button or is it a software based bootloop?
Click to expand...
Click to collapse
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
nathan30 said:
Same as this : https://www.youtube.com/watch?v=jzj73qYg5HA
I take the motherboard off, try to connect just the battery and the screen but same problem..
Click to expand...
Click to collapse
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
matgras said:
that happened to my old ativ s as well, it was due to a broken power button (electrically stuck, not mechanically) the only solution for me was to solder a new power button on it. But I just used it as an excuse to get a new phone.
Click to expand...
Click to collapse
Did you try this solution or not ? To know if I can try to do it
nathan30 said:
Did you try this solution or not ? To know if I can try to do it
Click to expand...
Click to collapse
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
matgras said:
I haven't, it may be very hard depending on the phone model, I just removed it with pliers so I could boot it with a usb cable and I got all the data I needed from my phone.
Can you get your phone into recovery or fastboot mode?
Click to expand...
Click to collapse
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
nathan30 said:
So I try to unsolder the power button and now the phone didn't bootloop anymore. Now I'm waiting the new power button I ordered to see.
And to answer your question, I was not able to reach fastboot or the recovery
Click to expand...
Click to collapse
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
matgras said:
if you install gravitybox and xposed there should be an option to turn on the screen with the volume buttons (I'm not sure though, it might have been another module) so you could use that as a temporary solution.
Click to expand...
Click to collapse
I can't have the phone booting, so I have to wait the new button ^^
nathan30 said:
I can't have the phone booting, so I have to wait the new button ^^
Click to expand...
Click to collapse
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
opssemnik said:
with phone turned off, (you can remove the battery and re plug it), hold the volume down button and connect it to the wall charger(do not use PC,it will trigger lg download mode), then you will be able to go to fastboot.
Once there you can:
fastboot reboot to boot to normal OS
fastboot boot twrp so you can install a rom or any other mod
Click to expand...
Click to collapse
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
nathan30 said:
Oh I didn't know this tips. Thanks a lot I will try asap. But the lg download mode can't be a good solution to reinstall a rom with the computer?
Click to expand...
Click to collapse
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
opssemnik said:
it locks the bootloader and fully wipes the userdata
here is the thread link
http://forum.xda-developers.com/goo...orial-how-to-flash-factory-images-lg-t2713833
Click to expand...
Click to collapse
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
nathan30 said:
So I try to push volume down and connecting the charger. I reach the fastboot menu but I can't select "start" or something else because without power button I can't validate my choice..
Click to expand...
Click to collapse
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
opssemnik said:
as i said, you need a computer once you reach fastboot mode, to send the commands.
fastboot reboot - to boot into normal OS
fastboot boot twrp - to boot twrp
Click to expand...
Click to collapse
Oh i didn't understand, thanks a lot it's working
Now I'm just waiting my new power button
i had this **** sorry for swearing i thought its something with my ROM CM13 Nightly I tried the repair service they said that they changed the power button no data was deleted so its probably the button but some one had a guide how to get the phone out that **** using your PC and manual ADB commands ( No program command line only )
I need help with this issue
when this problem reached me it was a meter of replacing the power button itself (it's like stuck there) by the way my phone was still under warranty so they changed it for me
https://www.ifixit.com/Answers/View/208337/How+do+I+fix+a+Nexus+5+Power+Button+Issue
https://www.aliexpress.com/store/pr...821-NEW-Free-Shipping/629458_32289287372.html
https://www.aliexpress.com/popular/nexus-5-on-off-switch.html
If that helped you dont forget to press the thank you button