Database Info

[Q] Atrix2 battery issues , seems hardware

Searched all over but never came across a similar issue posted anywhere.
When I connect the charger while the phone is on... it "shows charging". But is does charge "real slow" .
Then when I "take off the charger" , It "still shows charging"(lightning sign).
After I "reboot" to get rid of that , it boots up with red "Low battery". But it doesn't turn off for a while ,which hints the battery itself has no issue.
Whereas when I connect in and then disconnect the USB from my "PC" , it still indicates the USB connected sign.
When charging while the phone is "off", it shows charging (with the large battery sign) but the charged level keeps @ 0%.
PS: If I keep the phone turned off while the battery is inside for 2,3 days.. the batteries drain without any clue , the phone won't turn on.
Tried all factory reset & calibrating stuff , I start to wonder if this is an issue with my USB port or the battery connectors. I might be needing experts help ..Please help
[I do not hv any warranty left for this]

Maybe you need to try a new battery.That's all.
Sent from my Atrix 2 on Cyanogen(mod)10

atrix2 said:
Maybe you need to try a new battery.That's all.
Sent from my Atrix 2 on Cyanogen(mod)10
Click to expand...
Click to collapse
Yeah thnx bud, I could try that If I know for certain . Else it would be a waste.
What worries me is the issue with the "USB connection to PC". Which has nothing to with the battery circuit.

Have you tried another cable?
Sent from my MB865 running CM10

The issue seems to be probably with either the USB cable or the port.try another cable to be sure..
Sent from my MB865 using xda premium

Discharge while off sounds like a bad battery. Does it lose charge if you charge it and take it out of the phone?
Sent from my MB865 using xda app-developers app

FluffyCow said:
Discharge while off sounds like a bad battery. Does it lose charge if you charge it and take it out of the phone?
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Tried that , when I take it out and keep ,the charge stays perfect. That's why I'm guessing the battery is ok .

deveshmanish said:
The issue seems to be probably with either the USB cable or the port.try another cable to be sure..
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Yeah tried another cable . Made no difference . I think I should try replacing the port . Hope that's not very expensive .

Updates for my problem, (still no clue though).
I messed up with some MOTOMIZER app and happend to change the dalvik heap size to default(don't remember the value) . Just after this the phone boots only up to "Rethink possible" screen.
It won't let me flash via fast boot , "battery low cannot program" comes up.
Then I bought an external charger and a 3rd party battery . Fully charged the battery via the ext; charger and went to fast boot. No surprises , "battery low cannot program" came up again.
It seems the phone does not recognize the full voltage of the battery , even it's fully charged.
Now If anyone with some clue, pls help me out here.

I would suggest flashing with a factory cable. With it you pull the battery and the cable powers the phone so you can flash. I have one and it's been very handy. Give me a little while and I'll post a couple of links. You can make your own or buy one from xda member sKoRpn for like $10 shipped in the U.S. if you dont want to wait on me jump over to the kindlefire general forum.

mtnlion said:
I would suggest flashing with a factory cable. With it you pull the battery and the cable powers the phone so you can flash. I have one and it's been very handy. Give me a little while and I'll post a couple of links. You can make your own or buy one from xda member sKoRpn for like $10 shipped in the U.S. if you dont want to wait on me jump over to the kindlefire general forum.
Click to expand...
Click to collapse
Nice..Really appreciate man. I really didn't know about these factory cables. But just now I did my research.
Then again I doubt whether my phone recognizes the voltage. Anyways , definitely worth a shot.
I found some cables for sale. There are not recommended specially for Atrix2 but for Kindle Fire , Atrix , Droid Razr etc . Will those be compatible with A2 ??

Yeah man, It works on all moto phones and the kf. Really useful when you don't have a full charge on the phone.

bukiid said:
Updates for my problem, (still no clue though).
I messed up with some MOTOMIZER app and happend to change the dalvik heap size to default(don't remember the value) . Just after this the phone boots only up to "Rethink possible" screen.
It won't let me flash via fast boot , "battery low cannot program" comes up.
Then I bought an external charger and a 3rd party battery . Fully charged the battery via the ext; charger and went to fast boot. No surprises , "battery low cannot program" came up again.
It seems the phone does not recognize the full voltage of the battery , even it's fully charged.
Now If anyone with some clue, pls help me out here.
Click to expand...
Click to collapse
Sounds to me like you need to get a replacement phone via warranty. Possibly the battery too. If you are with AT&T call the warranty department. If not, then call motorola and try and use their 1 year warranty to get this fixed.

[Q] random shutdowns!!!plz help

hi i am new here. i bought already used sensation.but the problem is that it shuts down randomly and very frequently when not on charging. and while on charging its rum just fine.is it a battery problem or hardware coz i changed to custom rom as well but it is still the same. sorry for bad english

imz161 said:
hi i am new here. i bought already used sensation.but the problem is that it shuts down randomly and very frequently when not on charging. and while on charging its rum just fine.is it a battery problem or hardware coz i changed to custom rom as well but it is still the same. sorry for bad english
Click to expand...
Click to collapse
When charging not rebooting means... Battery pins are not tightly connected.
Try this solution
http://forum.xda-developers.com/showthread.php?t=1622683
Sent from my Nexus 7 using xda premium

ganeshp said:
When charging not rebooting means... Battery pins are not tightly connected.
Try this solution
http://forum.xda-developers.com/showthread.php?t=1622683
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
i have already tired tht i mean when phn is connected to computer via usb cable or plug into charher it doesnt shutdown but whn its nt charging it
shutdown very time i use any app

imz161 said:
i have already tired tht i mean when phn is connected to computer via usb cable or plug into charher it doesnt shutdown but whn its nt charging it
shutdown very time i use any app
Click to expand...
Click to collapse
You've tried the solution already
Now the battery pins are pretty tight and making proper contact?
Then mostly it's battery proper try another battery if you got one.. Or else get a new one (anker 1900mah preferably)
Sent from my Nexus 7 using xda premium

Battery doesn't hold charge

Hello, my Optimus 3D P920 battery acts very weird. It doesnt hold charge, it shows as charging but after i unplug, it says low battery. I bought a replacement battery and still the same. Bought an external battery and it still acts the same. Today it charged up and stayed full up until i restarted the phone. Then it showed 2-3 percent of charge. Battery calibration didnt work. Could it be software that is faulty?I'm on 2.3.5, so should i update to official ICS?Any suggestions?

tuxedo187 said:
Hello, my Optimus 3D P920 battery acts very weird. It doesnt hold charge, it shows as charging but after i unplug, it says low battery. I bought a replacement battery and still the same. Bought an external battery and it still acts the same. Today it charged up and stayed full up until i restarted the phone. Then it showed 2-3 percent of charge. Battery calibration didnt work. Could it be software that is faulty?I'm on 2.3.5, so should i update to official ICS?Any suggestions?
Click to expand...
Click to collapse
You should.
Here's the way:
http://forum.xda-developers.com/showthread.php?t=2195753
and don't forget to flash the WKPARKS bootloader.

aldrinmcmie said:
You should.
Here's the way:
http://forum.xda-developers.com/showthread.php?t=2195753
and don't forget to flash the WKPARKS bootloader.
Click to expand...
Click to collapse
Okay i'll try that, but will i be able to do it if the phone is on 2-3 percent of battery even when connected to the charger?

tuxedo187 said:
Hello, my Optimus 3D P920 battery acts very weird. It doesnt hold charge, it shows as charging but after i unplug, it says low battery. I bought a replacement battery and still the same. Bought an external battery and it still acts the same. Today it charged up and stayed full up until i restarted the phone. Then it showed 2-3 percent of charge. Battery calibration didnt work. Could it be software that is faulty?I'm on 2.3.5, so should i update to official ICS?Any suggestions?
Click to expand...
Click to collapse
How long does they work with this 2-3%? An hour? 2h? 3h? 10h?
Do you have stock ROM or custom?
When did this start? What did you do before you got this for first time?

aldrinmcmie said:
You should.
Here's the way:
http://forum.xda-developers.com/showthread.php?t=2195753
and don't forget to flash the WKPARKS bootloader.
Click to expand...
Click to collapse
Followed the tut and i'm on custom ICS. Still the battery has an x on it What exactly is WKPARKS bootloader and why do i need it? (The custom rom is not too fast though, thinks a lil bit when opening apps and etc).
p-vlad said:
How long does they work with this 2-3%? An hour? 2h? 3h? 10h?
Do you have stock ROM or custom?
When did this start? What did you do before you got this for first time?
Click to expand...
Click to collapse
I was on original GB, now on Custom ICS, still the same, battery on 1%, but the phone will not turn off, i can use it fine apart from camera which doesnt open due to battery being low. Could it be that the battery connectors are faulty?

tuxedo187 said:
Followed the tut and i'm on custom ICS. Still the battery has an x on it What exactly is WKPARKS bootloader and why do i need it? (The custom rom is not too fast though, thinks a lil bit when opening apps and etc).
I was on original GB, now on Custom ICS, still the same, battery on 1%, but the phone will not turn off, i can use it fine apart from camera which doesnt open due to battery being low. Could it be that the battery connectors are faulty?
Click to expand...
Click to collapse
just for a try... flash this kernel. backup your old ofcourse before that and tell us if you still have the same problem

p-vlad said:
just for a try... flash kernel. backup your old ofcourse before that and tell us if you still have the same problem
Click to expand...
Click to collapse
Okay flashed WKPARKS bootloader, flashed kernel you provided, but battery is still on X. What does this mean: P920/SU760: revert charging mode support to fix 0% battery (v1.21) in WKPARKS thread. Is there any option to revert battery usage or something in the new 1.21 version?
EDIT: by moving one of the metal pin things on the battery connector i managed to turn on the phone and it showed me 100% battery. Then i turned off the phone and played with the pin a lil bit more. Then again it showed 0 percent after turning on. So i guess the problem is in the battery connection port as the middle pin is faulty i guess. Now i need to purchase the whole small connector port and solder it. so far i didnt see any sites selling these charging ports separately. If anyone finds it, drop me a link. Amd thank everyone of ya for the help

I have the same problem, and a search on the internet learned me that many people have this problem.
I'm on 4.04 (official 30a rom).
When I load a battery with another O3D, then it's on 1% immediately when I put it in my phone.
And then when I put it back in the other phone, it starts to load there as well again as if it's really on 1% again.
I can only use my phone now while it's on a cable.
None of the possible solutions that I found on the web work.
It seems to be a hardware problem. It got worse over time. First it only loaded, and then emptied quickly. Now it doesn't load at all anymore.

I'm having this issue too. A way to work around it that works for me:
When charging.
1. Go to the hidden menu (3845# *920#).
2. Choose port settings.
3. Unplugg charger.
4. Select CP USB.
5. Press OK.
Now the phone shows 100% battery and you can use it untill the battery dies.
Sent from my LG-P920 using xda premium

jonathar said:
I'm having this issue too. A way to work around it that works for me:
When charging.
1. Go to the hidden menu (3845# *920#).
2. Choose port settings.
3. Unplugg charger.
4. Select CP USB.
5. Press OK.
Now the phone shows 100% battery and you can use it untill the battery dies.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Ok. But when i plug again to charger it loads again from 1%!?
Help!!! Now i can't charge when phone is off! And when itz on it shows 100% but when i unplug only 1%!
Which are the original settings in hidden menu, port settings?

mielnoir said:
Ok. But when i plug again to charger it loads again from 1%!?
Help!!! Now i can't charge when phone is off! And when itz on it shows 100% but when i unplug only 1%!
Which are the original settings in hidden menu, port settings?
Click to expand...
Click to collapse
My phone is on 'No Retention"
When I played around with this option "AP USB" also seemed to work.
(work = back to original failing battery charging status)
---------- Post added at 08:38 AM ---------- Previous post was at 08:35 AM ----------
I fixed this problem by screwing the battery connection up...
I used a screwdriver to push and pull a bit with the battery connection points on my phone, now it's a bit messed up and bended etc.... but it works...
My original intention was to replace the connection with a working one (my father's old O3D's battery connection) but I wasn't able to get it out in the proper way. (did not really know what the proper way was). So halfway when I figured that I wasn't really pulling it out but more like pulling it apart, I quickly tried to see if it was still working, after pushing things a bit back in shape, and it was!
Lucky me!
I'm not suggesting anybody to follow the same approach, and if you do I'm certainly not responsible for it.
but that's what worked for me.
All I fear now is that it will work for a while... and then something will move again, and it'll be the end of the phone anyway
But if I can use it till the S4 Active is released, then I'm a happy guy!

When i choose AP USB it says "slow recharge" on charge!? And by choosing "no retention" there is no change! Whatz about the other choices? AP UART. ..?

mielnoir said:
When i choose AP USB it says "slow recharge" on charge!? And by choosing "no retention" there is no change! Whatz about the other choices? AP UART. ..?
Click to expand...
Click to collapse
I tried them all, I think.
I'm on 'slow charge' if I'm not using the official LG cable. It still seems to charge pretty quick then.

Just for the record: my 'fix' only lasted for a few days.
At least it showed to my problem was with the connector between battery and phone. I'm going to see if I can get it replaced.

Only one solution is flash original bootloader from no for sale phone,but you can get only froyo e non imei on it but charge battery and keep all of charge in normal mode.

?
Sent from my LG-P920 using xda premium

jonathar said:
?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
On CMW make full backup of system on sd,copy on pc hdd for future,on sd in backup file nandroid.md5 open in notepad delete all of content and save,copy and overwrite boot.img from this file http://forum.xda-developers.com/showthread.php?p=35429965#post35429965 last reply
advance restore from ext sd ,restore only boot.img.
reboot
the system if you on other of froyo release no start up but if you connect charger it will charge 100% of bater and hold them,only for test,after you can copy and overwrite the boot.img with backup from your pc and will be on same situation become backup.
For this moment last solution stay on froyo without imei because when you downgrade you can't flash baseband so no net coverage on it.
I wait for someone ho can upload original fw version v08i to get work all of thinks in froyo.last chance.
If you have backup of your first firmware you are lucky.

Hi. I've had the same problem with my p920. Tried everything what I've found on the net, but nothing did helped. Day before it happened I've restored my phone to stock because of the screen(the bottom of the screen was unresponsive). The best luck that I've had 2 months of warranty left. So they changed the whole front of my phone. And main board. Battery was the same. I think yours case is the same like mines. Hardware failure.
Sent from my Nexus 4 using xda app-developers app

[Solved] Strange charging problem

Didn't noticed when or how exactly it started. My tab 2 developed a strange problem.I changed from ROM Sungsonic HD V3 and V2 cause V3 had bugs.After some time my Tab started switching off as soon as i connect to charger.I am using original charger and cable.The battery percentage indicator is completely out of sync.Tried factory reset,reflashed rom, no use.Any body else having or had this problem.Should i give it to warranty or need to replace my charger.Please help me guys........:fingers-crossed:
Please help.can't live without it.....:crying:

yeswanthnag said:
Didn't noticed when or how exactly it started. My tab 2 developed a strange problem.I changed from ROM Sungsonic HD V3 and V2 cause V3 had bugs.After some time my Tab started switching off as soon as i connect to charger.I am using original charger and cable.The battery percentage indicator is completely out of sync.Tried factory reset,reflashed rom, no use.Any body else having or had this problem.Should i give it to warranty or need to replace my charger.Please help me guys........:fingers-crossed:
Please help.can't live without it.....:crying:
Click to expand...
Click to collapse
Hardware fauilure !!!????

mythi said:
Hardware fauilure !!!????
Click to expand...
Click to collapse
Exactly,,, I finally confirmed it was a hardware failure cause, today I connected my usb otg cable and the tab just restarts or switches off which worked fine earlier
But yesterday it charged to 100 % without any problem.....I will recheck after installing stock rom....
The only problem is to wait for the samsung Service center people to fix it......:fingers-crossed:

yeswanthnag said:
Didn't noticed when or how exactly it started. My tab 2 developed a strange problem.I changed from ROM Sungsonic HD V3 and V2 cause V3 had bugs.After some time my Tab started switching off as soon as i connect to charger.I am using original charger and cable.The battery percentage indicator is completely out of sync.Tried factory reset,reflashed rom, no use.Any body else having or had this problem.Should i give it to warranty or need to replace my charger.Please help me guys........:fingers-crossed:
Please help.can't live without it.....:crying:
Click to expand...
Click to collapse
Try stock if it's still giving you the same problem then it's the problem with your data cable..
It shows its charging but it actually doesn't.. It shows 100% but when you connect something to the tab it just shuts down saying battery low.. I had the same problem.. I just installed stock and got my cable replaced from the service centre..

Problem solved,But doesnt understand what happened
zeetherocker said:
Try stock if it's still giving you the same problem then it's the problem with your data cable..
Click to expand...
Click to collapse
Changed to stock ,but the problem has not solved.
It shows its charging but it actually doesn't..
Click to expand...
Click to collapse
But my Tab charged for some time and had random reboots when connected to charger :crying:
It shows 100% but when you connect something to the tab it just shuts down saying battery low.. I had the same problem.. I just installed stock and got my cable replaced from the service centre..
Click to expand...
Click to collapse
My battery percentage never got full,,Charges 20 to 30 % from existing charge and then switches off..:silly:
,,,I don't understand what caused the problem.The problem isnt data cable as you said.I changed back from stock to Sungsonic HD and after some days all problems dissappeared
its fine now . USB OTG,Charging works fine ...Thanks for your support guys.
XDA is awsome....:good:

[Help]Sony Xperia E - RED LED unchargable battery

Hello guys , I am having a serious problem with my Sony Xperia E , it seems to be bricked. Something went wrong , I heard it happens sometimes because of software bug or whatever , and your phone goes into this sleep mode , which won't charge at all. I mean , when I plug it in to charge , the red led lights up (once every 3-4 seconds) untill it finally starts up , but when it starts up it shutdowns since the battery is 0% and not charging. On the internet I could not find any help about Sony Xperia E and this red led error. So , if anyone knows what to do.. Please help me , I'm too lazy to take it to a service and besides I don't got money to spare for it

Cezar725 said:
Hello guys , I am having a serious problem with my Sony Xperia E , it seems to be bricked. Something went wrong , I heard it happens sometimes because of software bug or whatever , and your phone goes into this sleep mode , which won't charge at all. I mean , when I plug it in to charge , the red led lights up (once every 3-4 seconds) untill it finally starts up , but when it starts up it shutdowns since the battery is 0% and not charging. On the internet I could not find any help about Sony Xperia E and this red led error. So , if anyone knows what to do.. Please help me , I'm too lazy to take it to a service and besides I don't got money to spare for it
Click to expand...
Click to collapse
Hi Cezar and everyone else (this is my first post),
I had the exact same problem and i was sure i bricked my phone beyond repair but there is a way to fix it. So my first thought was to externaly charge my battery but you can't do that, so i came up with a way. You will need to strip one end of the USB cable and separate the black and the red wire. The red wire is positive and the black is negative. Put the two wires between the battery and the positive and negative sockets in your phone (like shown in the pictures [attached]). And now your phone will be charging .
And do not forget, red is the postive, black the negative!
I hope this solves your problem!
P.S. Don't mind the black box, I built it just so i can use it for projects to have a power source, it's just a switch and a LED

Cezar725 said:
Hello guys , I am having a serious problem with my Sony Xperia E , it seems to be bricked. Something went wrong , I heard it happens sometimes because of software bug or whatever , and your phone goes into this sleep mode , which won't charge at all. I mean , when I plug it in to charge , the red led lights up (once every 3-4 seconds) untill it finally starts up , but when it starts up it shutdowns since the battery is 0% and not charging. On the internet I could not find any help about Sony Xperia E and this red led error. So , if anyone knows what to do.. Please help me , I'm too lazy to take it to a service and besides I don't got money to spare for it
Click to expand...
Click to collapse
Hello,
I was in the exact same situation yesterday with my Xperia J but luckily i managed to fix it, Your battery is able to charge what's happened is it's completely flat like there's no juice left, So what you have to do Plug your charger in via Mains and leave it like that for a good hour or two, Take your phone off charge and push the power button and see if the red led flashes 3 times if it does this means your battery is still flat, So what i did next is plugged it in via USB and put it in flashmode attempting to flash stock rom back onto it, but that just completely failed so then i tried flashing CWM that did get me somewhere my phone booted up after but then it died again so i left it on charge via USB this time for one hour and it was charging as usual i then flashed Stock rom back onto it, it was still bricked after (bootloop) so i flashed it again, and it got my device back to good health, Not sure if any of that made sense but **** it :laugh:

that536 said:
Hi Cezar and everyone else (this is my first post),
I had the exact same problem and i was sure i bricked my phone beyond repair but there is a way to fix it. So my first thought was to externaly charge my battery but you can't do that, so i came up with a way. You will need to strip one end of the USB cable and separate the black and the red wire. The red wire is positive and the black is negative. Put the two wires between the battery and the positive and negative sockets in your phone (like shown in the pictures [attached]). And now your phone will be charging .
And do not forget, red is the postive, black the negative!
I hope this solves your problem!
P.S. Don't mind the black box, I built it just so i can use it for projects to have a power source, it's just a switch and a LED
Click to expand...
Click to collapse
Thanks for the post and the help , but I have a question , in this way will I still be able to get things from my PC to my device and vice-versa ? or it will make it chargeable only ?
And also , is this the only way to deal the problem ? And do you have any ideea what causes this ?

Hi cezar,
Just keep your phone on origenal charger and cable for an hour. This should work.
Sent from my C6603 using XDA Premium 4 mobile app

Cezar725 said:
Thanks for the post and the help , but I have a question , in this way will I still be able to get things from my PC to my device and vice-versa ? or it will make it chargeable only ?
And also , is this the only way to deal the problem ? And do you have any ideea what causes this ?
Click to expand...
Click to collapse
Well with this method you will need a spare USB cabel for data transfer/flashing because this one will be just a USB on the one side and stripped wires on the other.
This is the only way I found how to deal with this problem, you could always find someone with the same phone so that he can charge your battery for you.
This problem is a symptom of a soft brick. I guess you flashed a ROM that isn't stable so you found yourself in a loop. My advice is to do one of the things I said and in the future flash nee ROMs with at least 50% battery so you don't find yourself in this situation!
P.S. Try SONYs Emma, thats a cute little program for flashing stock ROMs especially in situations like this one.
Narrry84 said:
Hi cezar,
Just keep your phone on origenal charger and cable for an hour. This should work.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In my case this disnt't work because my phone was stuck in a loop, it would start charging, boot up by itself, get to the point that it has 0% battery and power off by itself.
Sent from my C1505 using XDA Free mobile app

Narrry84 said:
Hi cezar,
Just keep your phone on origenal charger and cable for an hour. This should work.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This didn't work in my case either , it would start charging , boot up by itself, get to the point with 0% battery and power off by itself
that536 said:
Well with this method you will need a spare USB cabel for data transfer/flashing because this one will be just a USB on the one side and stripped wires on the other.
This is the only way I found how to deal with this problem, you could always find someone with the same phone so that he can charge your battery for you.
This problem is a symptom of a soft brick. I guess you flashed a ROM that isn't stable so you found yourself in a loop. My advice is to do one of the things I said and in the future flash nee ROMs with at least 50% battery so you don't find yourself in this situation!
P.S. Try SONYs Emma, thats a cute little program for flashing stock ROMs especially in situations like this one.
In my case this disnt't work because my phone was stuck in a loop, it would start charging, boot up by itself, get to the point that it has 0% battery and power off by itself.
Sent from my C1505 using XDA Free mobile app
Click to expand...
Click to collapse
hmm I just thought about this. I do have indeed a custom ROM , but this didn't happen in process of flashing. just randomly , a month maybe I after cyanogenmod 11. Anyways , I just thought about this. What if I get another batterry from one of my friends , flash back to stock on my device and then give back the battery to that guy. Wouldn't that just work ?

Cezar725 said:
This didn't work in my case either , it would start charging , boot up by itself, get to the point with 0% battery and power off by itself
hmm I just thought about this. I do have indeed a custom ROM , but this didn't happen in process of flashing. just randomly , a month maybe I after cyanogenmod 11. Anyways , I just thought about this. What if I get another batterry from one of my friends , flash back to stock on my device and then give back the battery to that guy. Wouldn't that just work ?
Click to expand...
Click to collapse
Actually this happend to me too days after flashing CM11 just after the GSM bug. Yes that would work perfectly!
Sent from my C1505 using XDA Free mobile app

Then you have too flash your phone using flashtool.
Sent from my C6603 using XDA Premium 4 mobile app

that536 said:
Actually this happend to me too days after flashing CM11 just after the GSM bug. Yes that would work perfectly!
Sent from my C1505 using XDA Free mobile app
Click to expand...
Click to collapse
cool thanks for letting me know I'll try