Related
I'm considering ordering an Otterbox defender, however I'm a bit worried about the plastic film that looks to be over the screen. How does it affect the feel of the screen? I've already got a very nice screen protector from ghost armor with a lifetime warranty, and don't know that I'd benefit from the additional later of plastic.
For those of you that actually have the defender, did you look to see how the plastic film is attached? Would removing it be as simple as holding a hairdryer or hear gun to the glue to melt and then peel it of, or would removal be more invasive?
I know that I'd basically be turning the defender into the commuter by removing the plastic, but I also want to use a belt clip, which the commuter doesn't have.
Sent from my SGH-I727R using XDA App
Have had my share of Os and all you gotta do is punch/poke through from one side for it [the screen protector] to come off the frame.
doesn't look too hard to remove.
Just a thin adheaive .
The defender is awesome. Makes the phone look like a mini tablet though lol
Sent from my SAMSUNG-SGH-I727 using XDA App
im using it on top of my other screen protecter with no problems
yea just rip it off, most of the otterboxes at best buy pretty much have the screen's off because of how ****ty they're put on.
Thanks for the replies, everyone.
I received my Otterbox Defender earlier this week, and tried it with the plastic cover for a couple of days. It did something very strange though - it started to bond to the Ghost Armor screen protector. Around the edges where there was pressure from the frame of the case, the plastic began to stick to the screen protector underneath. It was really obvious; imagine a screen protector that had partially peeled up and then been laid flat again. Where the Otterbox screen cover had bonded to the ghost armor, it was clear and the screen below appeared crisp and sharp. Where the two were just sitting on top of each other, there was a slight rainbow-speckle pattern, which had been there from the moment I placed the Otterbox cover on the phone. I suspect that what I was seeing was two different types of diffraction, one being glass-> ghost armor-> Otterbox, and the other being glass-> ghost armor-> air-> Otterbox. I guess this is one of those situations where a picture is worth a thousand words, eh?
Anyway, it looked disgusting, so I popped the top off, and held a hair drier to the Otterbox plastic for about a minute. This softened the glue that held it to the frame, and made pulling it off easy.
I'm now very happy with the setup.
Sent from my SGH-I727R using XDA App
Can you post a pic please. Thinking of purchasing this as well.
blazablaz said:
Can you post a pic please. Thinking of purchasing this as well.
Click to expand...
Click to collapse
Hi there, do you still need the pics for the Otterbox Defender? I've been using it for all the phones I had before.
Since this was my first install of a glass screen protector, I didn't know what to expect. I was glad to find out that the install process seemed easier than any InvisibleSHIELD I've done in the past. The results are great so far. No bubbles and the screen is beautiful.
I have tons of cases laying around so I'll add to this post and give a run down of how things go.
Verified OKAY
Spigen Slim Armor
Incipio DualPro SHINE (a little tight... place 1st layer on perfectly before slipping into outer layer)
Speck CandyShell
Trident Aegis Series (doesn't fit 100% perfectly on top edges... still okay)
Not Working
Seidio SURFACE (aka Platinum / PT Best Buy Case) - Will not close completely.
EDIT:
Reply to member questions...
Thanks! Great video...I may have to pick one up.
Sent from my Nexus 10 using xda app-developers app
Just picked up the Spider GLAS. Trying screen protector which is thinner than the GLAS. t. Couldn't be happier with the case, plus it doesn't interfere with my incipio case. Perfect solution for anyone looking for a screen protector.
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
flu13 said:
By the way....there was a back protector in there? Is that just a film to keep your back from getting scratched up if you don't use a case?
Click to expand...
Click to collapse
You are correct sir!
Thanks for the video, I'm waiting for my Mime glass screen protector to come in. I'll try to add the aluminium button in before the screen install.
levaryw thought
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
vdanasto said:
Does Air View work correctly at the lockscreen? I saw another video where the reviewer mentioned that Air View on the lock screen was a bit off (the shiny dot jumped from one spot to another) and did not follow the finger correctly.
Click to expand...
Click to collapse
Oops. Before making another video, I must have just skimmed over your question. It appears to work fine on the lock screen. Which version did he have? GLAS.t or GLAS.tr?
flu13 said:
Regarding putting the glass on over your aluminum home button....
It looked like that was slightly difficult, and it also looked like the glass didn't want to go down all the way at first. But maybe that was just the plastic part that got peeled off, because as soon as you peeled that off, the glass looked perfect. Can you elaborate on that?
Click to expand...
Click to collapse
It was actually the supplied jelly bean button. It only took some time because I used the alignment around the home button to determine where to drop the GLAS onto the surface pretty much. That and focusing on the sides more than the top. Also, I thought there was a huge bubble down there initially as well. It was the plastic protector though.
screwdestiny said:
Hmm, I'm using the Seidio Surface with the MIME Ghost Glass, which at 0.4/0.32mm (there's a discrepancy) is thicker than the Glas.t. The Seidio closes and fits on mine.
However, that's with the stock battery. With the Anker 2600 battery, which is a little thicker than the stock battery, it doesn't close.
Click to expand...
Click to collapse
I looked at the product quickly and it appears to have a larger opening up top. Since this case really hugs the device, that becomes an issue for the Spigen GLAS.
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
galaxy808 said:
you giving us the finger in the video? punk lol...
nice headshots lol, if only the glas.t covered over the sensor areas I'd rock one, for now I'm just rocking the spigen ultra crystal since out of the box.
Click to expand...
Click to collapse
Oops. Usually I give the video a quick one time over. Must have missed it.
Since I pay for 99% of the stuff seen, and it is my phone, I have to make a choice. Do I make a video and sacrifice a lousy install, or do I poke my head in the shot .
I think they might leave those areas open to ensure they function correctly. It does cover the front facing camera though. If you look at the protector the poster a few above was talking about.... It doesn't appear to cover much of the top at all.
As long as you're rocking something, it's better than nothing. I thousand knives can't damage Gorilla glass, but 1 penny sharing space in the same pocket sure can lol.
yeah I think I prefer the glas.t over the TR just because it's thinner can looks more like nothing's on than the TR with the beveled edges.
I may get it eventually maybe if they have a father's day sale lol, like the 20% off memorial day.
I'm still digging this product. I have some Chinese glass screen protectors, but I'm going to have to give them away for user submitted reviews.
I can't get myself to take the Spigen off the S4.
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Great video. Thanks for sharing! I love SPIGEN products.
Thx for your video. It will help me so much
Ryukouki said:
With the Glas.T Slim do you experience any discomfort from the glass poking into your ear when making phone calls?
Click to expand...
Click to collapse
Not really. I use a case on it always though.
You can feel the edges of the glass if you're moving it around, but if you just place the phone directly up to your ear, you won't notice anything.
It is my pleasure to provide the videos. Thanks for watching.
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
eyecon82 said:
Let us know if you start getting bubbles around the edge of the screen
a lot of the amazon reviews say bubbles start forming at the edge due to an adhesive issue....
Click to expand...
Click to collapse
The phone hasn't been put through a lot of use to date, however as of this weekend my wife is giving up her iPhone 5 and using this regularly. We have a newborn baby and she will be carrying that thing in her purse and back pocket most of the time.
If there are issues, she should be able to get them to appear! I'll report back if anything happens.
http://www.iloome.com/Screen-Protector-ScreenMate-Premium-Tempered/dp/B00D8M1QUU/
For $27.99 shipped free (in the US anyway), seemed an ok price. Now I am coming from the Maru Tempered glass and that was a total waste of time and money. But that's another story.
I got my package a day ahead of schedule, kudos for speedy delivery of USPS here. When I got the package, the screen protector came in a nice thick box. My guess is to protect the iloome while in transit. When opening the box, you see instructions on how to install the protector. First and foremost, they say to look at the youtube videos and check out the installation vids posted by them. I viewed the GS4 video and that was really cool looking! I wonder why they didn't create a protector that is completely clear like the GS4 video shows. But whatever...I digress....
After checking the vid, I read the instruction card in the box a few times to make sure I didn't miss any steps. I practiced my placement of the protector a few times to align the camera and LED. Now saying that and looking at my phone, the front camera is a tad off. But I am OK with that because I don't take selfies lol. Or vid phone. Well anyways, I just turned it on to see if any of the protector was blocking the front cam and I am glad to report back no. All is clear.
After I put it on, tested PIE UI on it and increasing the trigger area, it works like it should. Is there any loss of responsiveness? A slight, but no where in the realms of the other protector I had, the Maru (boo!). Also I do see a oily spot smack in the middle of the phone. I cannot see it with the screen on, only when off
Anyways here's pics of it installed without and with the OEM White bumper. I am liking this protector so far!
Any questions please feel free to post them!
Thanks once I get back my money from maru I will pick this up. I just wish they cut out the camera
Sent from my Nexus 4 using xda premium
is it a fingerprint magnet?
what is the performance on the resistance of the fingerprint?
thanks
ping42 said:
is it a fingerprint magnet?
what is the performance on the resistance of the fingerprint?
thanks
Click to expand...
Click to collapse
It does attract fingerprints more than a simple screen protector. So yea it's a bit of a fingerprint magnet.
And after a half day of usage. I have to report it's not responsive as a screen protector, but it still works pretty good. I love the slickness of the glass. It's buttery smooth.
I have gotten over the oily or rainbow spot in the middle thus far. As long as it works as well as it does, I can deal with it and enjoy the smoothness.:good:
One of the things I love about the Nexus 4 are the curved edges. Does the iloome greatly diminish that? Thanks.
Sent from my Nexus 4
FallN said:
One of the things I love about the Nexus 4 are the curved edges. Does the iloome greatly diminish that? Thanks.
Sent from my Nexus 4
Click to expand...
Click to collapse
Yes it does. I currently use a bumper and if I don't I use a case like the Ringke Fusion (when traveling). And when using those, the edges are pretty much gone, which I am used to since getting cases.
New day with the iloome...heading into the office this AM, and popping my phone on my orb charger, I noticed the screen get really dusty. I have to admit, my truck is dirty as all heaven lol, so I know where all the dust and debris came from. Just a dusting with a lint free cloth and good to go from there. Still loving it!
Thanks for the info. I appreciate it! I'm seriously considering getting one... Just want to make sure it doesn't have all the problems like the Maru...
1. When holding the phone naked (no case or bumper) does it add noticeable or considerable thickness in your hand?
(95% of the time I use my phone naked. The slim form factor of the Nexus 4 feels so good... Don't want to completely ruin that...)
2. Has the rainbow splotch in the middle of your screen gone away? If not, can you take a picture of it?
Thank you.
Sent from my Nexus 4
FallN said:
Thanks for the info. I appreciate it! I'm seriously considering getting one... Just want to make sure it doesn't have all the problems like the Maru...
1. When holding the phone naked (no case or bumper) does it add noticeable or considerable thickness in your hand?
(95% of the time I use my phone naked. The slim form factor of the Nexus 4 feels so good... Don't want to completely ruin that...)
2. Has the rainbow splotch in the middle of your screen gone away? If not, can you take a picture of it?
Thank you.
Sent from my Nexus 4
Click to expand...
Click to collapse
I totally forgot about the blotch. I mean it was there yesterday and then when I just looked at it, it's gone! Lovely! And looking at the phone without the bumper, with the just the iloome looks a bit odd IMO. I wouldn't use it without a case or bumper, but that's me. I think it's because I know the edges are there and naked I KNOW what it's supposed to look like lol. I mean it doesn't look bad. To me it kinda looks like a thick screen protector on it. Would I leave it on naked? Personally no, because when you drop the phone naked, it's most likely going to crack somewhere. But if your goal is to protect the face, I wouldn't bank on it entirely. Well...without a case of some sort anyways.
EDIT: just took the bumper off and took a good look at it...
To me, it looks like a Nexus One! LOL A bit bigger, but has the "look" when the black painted sides are visible. I mean if it was clear, I may have a different opinion? I dunno lol.
Also, I noticed a hairline scratch under the protector which can only be seen with the screen off and at an angle. I emailed iloome last night, took a picture this morning and an hour later, they issued a refund and I get to keep the protector. Great customer service!
Sounds awesome. Does the protector have beveled edges?
bkoon1218 said:
Sounds awesome. Does the protector have beveled edges?
Click to expand...
Click to collapse
Nope. Look at the third pic.
Does death gripping the phone with the bumper make the protector lift? If you have a Ringke Fusion, I would really appreciate it if you could test with that!
Thanks!
bkoon1218 said:
Does death gripping the phone with the bumper make the protector lift? If you have a Ringke Fusion, I would really appreciate it if you could test with that!
Thanks!
Click to expand...
Click to collapse
My Fusion case is at work so I'll report back to you sometime on Monday when I get back in my office. Feel free to remind me!
are there any tempered glass screen protectors that have curved edges? i like to use my phone without a case
Dimatchka said:
are there any tempered glass screen protectors that have curved edges? i like to use my phone without a case
Click to expand...
Click to collapse
Not that I am aware of, sorry.
Dimatchka said:
are there any tempered glass screen protectors that have curved edges? i like to use my phone without a case
Click to expand...
Click to collapse
Yeah I'm the same way. I love the slim dimensions and buttery smoothness of my N4 naked but still want a little protection for the front and back glass... And I hate the rubbery feeling of normal screen protectors so they aren't an option.
I'm willing to pay top dollar but the few glass screen protectors they have are either garbage (i.e. Maru) or don't offer a really thin profile with rounded edges...
Sent from my Nexus 4
bkoon1218 said:
Does death gripping the phone with the bumper make the protector lift? If you have a Ringke Fusion, I would really appreciate it if you could test with that!
Thanks!
Click to expand...
Click to collapse
Pics of the iloome tempered glass screen protector with Ringke Fusion case. Looks good! LOL I can say it JUST fits with the Fusion on. Any higher or wider and the screen protector will come off.
EDIT: Put back the Fusion and pressing the sides will case the lip of the Fusion case to slip under the glass and cause a popping noise. Even though I don't see any lifting of the glass, I can see that it may do so with constant gripping on the sides.
Thanks! You're awesome! I was worried the protector would lift when I grip the phone too hard with a case on. It happened with my Fantom 4.
bkoon1218 said:
Thanks! You're awesome! I was worried the protector would lift when I grip the phone too hard with a case on. It happened with my Fantom 4.
Click to expand...
Click to collapse
WAIT! LOL
I just put it back on and based on the "tight grip". I hear a pop when pressed together and hear a pop on the sides of the phone...So it will lift IMO eventually sorry!
Oh nooooo! I guess I'll decide between running my phone naked or stick with my case, lol. The bumper is fine though?
bkoon1218 said:
Oh nooooo! I guess I'll decide between running my phone naked or stick with my case, lol. The bumper is fine though?
Click to expand...
Click to collapse
Yes the bumper is fine. When gripping it tightly, the bumper stays into place. I think the Ringke has some give and the lip slips under the glass a bit to create that popping sound.
I ordered the Clarivue tempered glass one as well and apparently is thinner and no black marking, making it completely clear,which I prefer, but will report back if it works on both bumper and Fusion. Stay tuned! I should get it by the end of this week or next Monday the latest.
However, if it doesn't work with PA PIE UI, then it's dead to me lol. So for moment the iloome wins out thus far.
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
blueice5249 said:
I just ordered my new Moto X 2014, I'm actually getting it for free to replace my old Moto X.
What are some good case and screen protector combinations? I know in the past I've had some trouble with a case AND a screen protector, it's sometimes one or the other. I'd prefer a clear case, but I'll probably end up getting more than 1 anyways.
Click to expand...
Click to collapse
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
adm1jtg said:
Just got mine as well here is what I have found so far:
All tempered glass is a waste of money for this model none if it fits right at all due to the rounded edges
I would ASSUME the older plastic style ones MIGHT work better but read they also dont work that well
Most cases that say they are clear are actually frosted and that for me defeats the purpose of customizing the back
So I am going naked screen and hula case and will carry the phone in a belt pouch. Not the perfect solution but for me its acceptable. I would have preferred a strong clear tpu case (most turn yellow), I dont want a hard case, and would have love tempered glass on this but they simply dont adhere correctly.
There you have it the sad but true facts about cases and screen protectors from the research I have done. Hopefully some others in here can give you better news
Click to expand...
Click to collapse
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
blueice5249 said:
I don't mind a hard case and not a fan of the glass screen protectors. I like the film ones. My last film protector made it a matte screen and took the glare away. It was fantastic! And it worked with the case. But it's the only smartphone that I've had where screen protector AND case can be used.
Click to expand...
Click to collapse
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
adm1jtg said:
I guess no one else has found better solutions. The naked case is a decent hard clear case though expensive and also prone to yellowing
Click to expand...
Click to collapse
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
blueice5249 said:
It's either going to be the Gelli Black Frost case or the Hula Bumper case initially. I'm getting one of those for free if I buy a screen protector, which I was going to do anyways.
I just can't get anyone to tell me what one of those cases, if any, work with a screen protector. I've been trying to get someone to answer this question for 2-3 days now. Nobody on earth knows! lol
Click to expand...
Click to collapse
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
adm1jtg said:
I have the hula bumper case and i can't see any reason it would interfere at all with a screen protector. When I tried my glass protector it was in combination with the hula. Honestly thought most screen protectors are so think that they can be used with almost any case.
Click to expand...
Click to collapse
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
blueice5249 said:
The glass is usually cut thinner, the film isn't always cut thinner and I've had instances where the cases would peel up the edges of the film. How did you like you Hula?
Click to expand...
Click to collapse
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
adm1jtg said:
I love the look, not sure it would truly give a huge amount of protection but should protect the edges of the glass on the screen which i read is the most vulnerable part of the phone. It does have a little but of movement when you hold the phone (aka wiggles slightly) but it also adds more grip, i have a plastic backed phone.. Those damn beveled edges, nice concept, nightmare in reality. They are why no glass or other screen protector will truly fit right.
Click to expand...
Click to collapse
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
blueice5249 said:
How bad is the wiggling? I have a bit of OCD so sometimes things like that will really bug me.
Click to expand...
Click to collapse
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
These are not my pics but its how my phone looks
https://onedrive.live.com/?cid=89BBC42D0064FA66&id=89bbc42d0064fa66!1491&authkey=!AAcLU2pED71lK04
Also if you can order the hula from case mate rather then moto as moto charges an extra $5 shipping. They are also at times very hard to find in stock anywhere depending on the color you want.
Click to expand...
Click to collapse
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
blueice5249 said:
I really like the way that looks. My phone is Royal Blue, White Front, and Red Trim. So it's between a white or red hula case, or the gelli case. I'm leaning towards the Hula for more everyday use I think, and buying another case from amazon for when i need more protection. Or buying the hula and getting a good protecting case from moto's website
I have a coupon code from Moto for $25 off, so Im buying the screen protector and I basically get any case for free.
Click to expand...
Click to collapse
I use the hulu and a cheap leather holster with belt clip to carry it in. Its extremely cheaply made but fits real well.
http://www.amazon.com/gp/product/B001H3ON0W/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
nbell13 said:
I have the Hulu and the Trident Aegis. The plastic on the Hulu cracked at the USB port area (from bending when removed or put on), but it doesn't effect the case
Click to expand...
Click to collapse
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
braves10 said:
I've been using the Hula bumper and Power Support Brilliant Film screen protector. The edge of the case doesn't contact the screen protector so it doesn't peel.
Click to expand...
Click to collapse
Thank you! This is exactly what I wanted to know! :highfive::good:
adm1jtg said:
When holding or using the phone its fine. I am also extremely OCD and when it moves/wiggles is like when you just tap the side with your finger you can feel it move very slightly, very slight;y but for me noticeable, but not enough to get rid of the case just makes the phone look awesome.
Click to expand...
Click to collapse
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
fldude said:
Weird question, but do you think there's enough give with the Hula case where it would fit around the Moto X in a thin TPU case? I like the TPU cases but worry about the protection or lack thereof. Just wondering if it'd be possible to use them and occasional put the Hula Case around them for extra protection. Of course the buttons probably wouldn't work then...
Click to expand...
Click to collapse
You wont be able to use the two together, to much of a lip on the back with the hula case. Even if you did somehow fit it on the tpu would never touch the back of the phone just the lip around the edge. TPU will likely give more protection then hula but hula will likely give more grip then a tpu case.
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
xKroniK13x said:
New to the X, is it worth while getting a screen protector? Case is on its way, but with Gorilla Glass 3, is it truly worth the extra to cover the screen? Probably will end up with one but wanted some other opinions!
Click to expand...
Click to collapse
That is completely up to you but I can tell you this based on my research and personal experience:
There is not a tempered glass screen protector on the market for the 2014 that adheres properly. Not one of them works well and thus dont bother with those. The 2014 tapered edges on the glass are the issue. I have HEARD of similar issues with PET style screen protectors but never messed with those as they never felt right to me.
Lastly everything I have read says those tapered edges o the glas DO make it more prone to crack or brake on a drop so you need SOMETHING to protect the glass edges. Full case, hula bumper, something....
blueice5249 said:
Thanks! I heard one other person had a problem with cracking. Very good to know beforehand, I'll make sure to be a bit more careful.
Click to expand...
Click to collapse
A lot of the cracking that people report is from dropping their phones, not taking the Hula on and off. The Hula is designed to absorb the shock of a drop and it breaks so that the phone does not. Better that your $20 bumper break than your $600 phone.
I take my Hula off and on all of the time and it has never cracked. I think people are dropping their phones and the Hula is doing exactly what it is supposed to do - absorbing the shock, which can result in it cracking instead of your phone.
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.