Related
Well here's the thing..I recently flash the system Tweak lagfreev1 by slaid..and after that my phone reboots and got stuck in the bootscreen(the android text). then after that i've tried to wipe data/reset in cwm recovery but my phone hangs up at formating data and doesn't even move..well ive again tried the restore/backup kind of thing and the same problem exist again..cant restore the data but showing me no error just stucking up at the restoring data state..
CAN SOMEONE PLSS GIVE ME A SOLUTION FOR THIS THNX ALOT ^_^
Im running at CM7.2 rc3 when this happen..
Flash a stock ROM using ODIN . I think this could solve your problem.
Thnx man trying it right now im still downloading the stock rom..
ive already tried flashing via Odin..and it FAILED T_T..
anyone had a better solution?
lintikjay said:
ive already tried flashing via Odin..and it FAILED T_T..
anyone had a better solution?
Click to expand...
Click to collapse
What error did you get?
Its unlikely that a script will cause so much problem.
Sent from my Galaxy Fit @ 801Mhz- Razodroid
chelsearulz5 said:
What error did you get?
Its unlikely that a script will cause so much problem.
Click to expand...
Click to collapse
well after flashing rom with odin im stuck at a boot recovery loop..it always stay at the stock recovery and when im trying to reboot system the same thing will happen..and i cant wipe the data/reset too..do you have any solution for it? it just happen when i installed the lagfree script T_T
lintikjay said:
well after flashing rom with odin im stuck at a boot recovery loop..it always stay at the stock recovery and when im trying to reboot system the same thing will happen..and i cant wipe the data/reset too..do you have any solution for it? it just happen when i installed the lagfree script T_T
Click to expand...
Click to collapse
Boot recovery loop?
What error do you get while doing wipe/data reset ?
Also flash a firmware of your region through Odin and then try wipe/data reset.
Sent from my Galaxy Fit @ 801Mhz- RazoDroid
chelsearulz5 said:
Boot recovery loop?
What error do you get while doing wipe/data reset ?
Also flash a firmware of your region through Odin and then try wipe/data reset.
Click to expand...
Click to collapse
yup boot recovery loop..you know when u turn on ur phone and it will take you the recovery thingy..and after selecting reboot system it will be back at the recovery screen..while im trying to wipe data it will just stuck..no error no nothing just stuck at the formating data.. state..i've already tried waiting for it but it ends up draining my battery..I dont know any solution for this..so plss sir help me..
lintikjay said:
yup boot recovery loop..you know when u turn on ur phone and it will take you the recovery thingy..and after selecting reboot system it will be back at the recovery screen..while im trying to wipe data it will just stuck..no error no nothing just stuck at the formating data.. state..i've already tried waiting for it but it ends up draining my battery..I dont know any solution for this..so plss sir help me..
Click to expand...
Click to collapse
Try flashing a firmware of your region.
Are you sure you put the script in the right place?
And did you mess with the permissions or something?
Sent from my Galaxy Fit @ 801Mhz- RazoDroid
chelsearulz5 said:
Try flashing a firmware of your region.
Are you sure you put the script in the right place?
And did you mess with the permissions or something?
Click to expand...
Click to collapse
well about the permissions i hadnt do anything to it..and the script its from a flashable zip..after flashing it in cwm the phone is unstable and got me to the loop..ive tried flashing via odin and now i can reset data in the stock recovery..and thats the problem now..cant pass trough the stock recovery screen..got any suggestion or any solution??
lintikjay said:
well about the permissions i hadnt do anything to it..and the script its from a flashable zip..after flashing it in cwm the phone is unstable and got me to the loop..ive tried flashing via odin and now i can reset data in the stock recovery..and thats the problem now..cant pass trough the stock recovery screen..got any suggestion or any solution??
Click to expand...
Click to collapse
So now you're able to wipe data/format ?
Flash in ddkq5 via odin and then install one of the custom roms available most probably razodroid v1 or creeds 1.5.
Listen, I have been flashing stuff into my device for quite some time now. Almost everytime I flash , I experience a bootloop and related stuff.
As long as you can access download mode and recovery mode, there's no reason to worry.
Whenever I suffer from such a problem , I keep flashing firmwares and roms built for my device and wiping data until I fix it.
Sent from my Galaxy Fit @ 801Mhz- RazoDroid
boot loops are pretty common.
just keep flashing roms until you find the one perfect for you.
could you plss provide me a link for DDKQ5..cant seem to find it..sorry..
lintikjay said:
could you plss provide me a link for DDKQ5..cant seem to find it..sorry..
Click to expand...
Click to collapse
forum.xda-developers.com/showthread.php?t=1320880
Sent from my Galaxy Fit @ 801Mhz- RazoDroid
dude...let me know ur phones model nmbr....the region...nd then.....the specific prob....i think odin will clear the bootloop thing,,,...
thnx panku123..the problem is now fix..i already push the thnx button for chelsearulz5 but still thnx men ^_^..
need help plzz.. i have the same problem. my phone is stuck in a boot loop and does not get over the "android" text. when i select wipe data/reset in cwm recovery it gets stuck showing "formatting /data" and all i have to do is reboot again in recovery. i installed the stock recovery ddkt3 through flashable zip file and tried to wipe data but that too gets stuck in the formatting /data screen. i was using cyanmobile revo A rom when this happend. tried to flash roms gingerbread sandwich v4 and razodroid v4 (both from flashable zip files) but again atuck at android text. im bit unfamiliar with odin, just flashed cwm with it. plzz help how to flash with odin
Reinstall CWM.
ZmisiS said:
Reinstall CWM.
Click to expand...
Click to collapse
reinstalled several times n also tried stock recovery n amon_RA recovery... no change... still getting stuck at formatting /data
is there any way to wipe data through pc (command prompt)??
sumeet2203 said:
reinstalled several times n also tried stock recovery n amon_RA recovery... no change... still getting stuck at formatting /data
is there any way to wipe data through pc (command prompt)??
Click to expand...
Click to collapse
Try reinstall stock ROM.
Hey guys!
I am.. new.
I have been here looking at the forums for about two months before deciding to register.. today.
I got a question.
This ICS ROM looks very interesting.. http://forum.xda-developers.com/showthread.php?t=1449649
I don't understand the installation steps..
I never flashed my phone before and i hope you understand.
So.. My phone is a Galaxy SL i9003
Baseband version: I9003JXKP3
Kernel Version: 2.6.35.7-CL982987
Build number: GINGERBREAD.JPKPH
Can anyone explain in detail the required steps to install the rom?
The phone isn't rooted.
Skander1998 said:
Hey guys!
I am.. new.
I have been here looking at the forums for about two months before deciding to register.. today.
I got a question.
This ICS ROM looks very interesting.. http://forum.xda-developers.com/showthread.php?t=1449649
I don't understand the installation steps..
I never flashed my phone before and i hope you understand.
So.. My phone is a Galaxy SL i9003
Baseband version: I9003JXKP3
Kernel Version: 2.6.35.7-CL982987
Build number: GINGERBREAD.JPKPH
Can anyone explain in detail the required steps to install the rom?
The phone isn't rooted.
Click to expand...
Click to collapse
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot
http://www.theinfomania.com/2012/03...ustom-rom-on-to-your-samsung-galaxy-sl-i9003/
follow this till step 30....
then replace Poseidon with CM9alpha5 in the steps after step 30..
and after that
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
loukalok said:
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot
Click to expand...
Click to collapse
Will this do the trick for CF-ROOT? forum.xda-developers.com/showthread.php?t=1351056
welcome,I hope you're enjoying your staying here.
john9 said:
welcome,I hope you're enjoying your staying here.
Click to expand...
Click to collapse
Thanks
loukalok said:
you first use odin to flash cf root for JPKPH
then reboot and hold the power button,volume up and home buttom.
and go to CWM
and then wipe data ,cache and dalivk cache
and install rom from sd
choose the cm9
and wait installing
and reboot
Click to expand...
Click to collapse
Will this do the trick for CF-ROOT? http://forum.xda-developers.com/showthread.php?t=1351056
Skander1998 said:
Thanks
Will this do the trick for CF-ROOT? http://forum.xda-developers.com/showthread.php?t=1351056
Click to expand...
Click to collapse
yes, this is universal CF-ROOT, which can flash on all version of GB FW.
the addon is for the EXT4 conversion, which convert partition format.
this is to boost up you phone perfomance.
which you have to learn that, after you have know more on flashing
btw, after flash cm9, you already on ext4
What is the point of making wipe?? I didn't do it when I installed it. Shall I reflash the CM9 ROM or keep it like this???
Also another thing. Why I cannot overclock my phone?? When I had the stock rom I could overclock to 1.2Ghz with SetCPU, but now I can't.
Please help me.
Thank you.
juanfpo96 said:
What is the point of making wipe?? I didn't do it when I installed it. Shall I reflash the CM9 ROM or keep it like this???
Also another thing. Why I cannot overclock my phone?? When I had the stock rom I could overclock to 1.2Ghz with SetCPU, but now I can't.
Please help me.
Thank you.
Click to expand...
Click to collapse
wipe is to make sure phone reload the new rom.
CM9 kernel did not provide over clock
There is a discussion and q&a thread for cm9.
http://forum.xda-developers.com/showthread.php?t=1563920
kamilien said:
There is a discussion and q&a thread for cm9.
http://forum.xda-developers.com/showthread.php?t=1563920
Click to expand...
Click to collapse
Thank you, the thread was spammed alot and didn't know if i am supposed to ask such a simple question there.
Sorry for making a new topic.
You don't have to be sorry, It was just a reminding. Welcome.
Hi,
I have taken the code of G3MOD code and modded it for JB.
Also I have included the Bluetooth fix that I have done for ICS. Yeah the same fix is also available in JB.
Use this kernel with ICS & JB as the bluetooth fix is applied only to these two versions.
Try it out and let me know the comments.
Download Here
Thanks to all G3 developers.
Special Thanks to g3mod team, marcellusbe, hillbeast, cdesai.
If I forget to thank anyone it's not intended, PM me. I will thank you.
Note: I am not responsible for any damage caused to your phone (softbrick or hardbrick).
Thanks mate , Hope to see more development from your side as well ...to make G3 the best ever phone
Can you make a .tar version please? I can't flash it through CWM.... I flashed JB then without rebooting flashed this but it still didn't work... Same with gapps, they don't install for me...
I also can't flash this kernel either as it still says im on [email protected] #cm7_kernel_oc_1.8
Are we able to access CWM then?
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
BeriCud said:
Hi, for me is it working I wiped cache and dalwik cache. May be it help...
Sorry for my bad english
Click to expand...
Click to collapse
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
ilievski.ace said:
Ok How
1 . instal rom tru CWm then wiped cache and dalwik cache and after that instal g3mod ????
Click to expand...
Click to collapse
When you install the ROM you should wipe the data as well but when installing the kernel you should wipe cache and dalvik cache.
Click thanks if I helped.
Thank you very much....
A small query....
If I install the kernel immediately after applying JB update then will I be able to access cwm the next time??
Thanks
kernel "bluetooth???"
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
zsolt64 said:
hello
i have installed this kernel for cm7-8.3, and wipe dalvik cahche but i probed bluetooth whit another phone and got message "couldn't connect"
the copulation is ok, but not connect!!!:crying:
earlier i was foryo, and bluetooth is working perfect!
any idea?
Click to expand...
Click to collapse
pmanian said:
I have not tried with CM7. Use this kernel with ICS / JB as the bluetooth fix is applied only to these two versions. Will try with CM7 and update the kernel later.
Click to expand...
Click to collapse
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
@pmanian
Can you make UMS working on ICS/JB with g3mod kernel?
To all who managed to get it working: Do data2sd and CWM work? These are the key features I'm missing right now
Thanks a lot!!
Sent from my GT-I5801 using xda app-developers app
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
pathfinderhd said:
you are rocking sir !! :good: this kernel is a real good !! thanks a ton for it.
Is JB available for G3 ? i guess Marcellube is working on it and haven't released JB yet.
Click to expand...
Click to collapse
Search the JB thread in the development section. He released a build but it is old and has quite a few bugs in it which he has fixed.
I reflashed JB, then g3mod, wiped data, cache and dalvik cache. Neither CWM nor data2sd are working, but the bootscreen changed, and I don't get stuck. Can anyone help me?
ilievski.ace said:
First i do is
1. Install jb-pre relice and claer data , davik i cashe ...
2 . instal G3 mod kernel JB and clear cashe and davik and reboot
AND is bootingh infinitive ...... stack on boot animation ANDROID ......
HElp
Click to expand...
Click to collapse
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
ilievski.ace said:
I am raplaying to mi self OK need HELP
Some body to make the G3Mod karnel to Odin and thel me what or how to clear Davik or to Clear Cashe .... ??
When instaling G3Mod In JB i have bootloop .....
Thanks
Click to expand...
Click to collapse
take any tar of any rom.......remove all the files in it and place the zImage file in the provided zip into the tar file.(With the help of TOTAL COMMANDER)
process:
Install the ROM through CWM...
then go to download mode and then flash the kernel through ODIN
reboot in to recovery and clear cache & dalvik-Cache.
reboot & enjoy.
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
You shld ask this in dev section under angeeks ROM thread
vipul12389mehta said:
You shld ask this in dev section under angeeks ROM thread
Click to expand...
Click to collapse
Hey buddy, he is not able to post in Dev section due to NewBie.
Badboy800 said:
Hello guys!
Since I'm new to this forum im not able to post in the development section, so i ask for your help here.
Im trying to flash the new rom Angeeks_SamI9103´s ROM but got stock on the Galaxy R boot screen after flashing it from CMW 4.0
The Galaxy R splash screen shows in few seconds and after that the phone restarts back to the CMW instead of booting up.. I have followed the installation steps by first flashing the stock I9103XXLQ9 ROM, flashed CMW 4.0,0,2 and then the ROM its self. So whatt am I doing wrong?
Sorry for my bad English and thanks in advance.
Click to expand...
Click to collapse
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
hasanjaved said:
wipe cacche dalvik cache , factory reset
flash the ROM again
again wipe all...:good::fingers-crossed:
try it
Click to expand...
Click to collapse
I have done than before and after flashing the ROM, but will give it another try
Thanks
Kartik pat said:
Hey have u flashed the rom on some other kernal if yes den try flashing the nordic firmware(XXLQ9) n den flash the rom
Hit thanks if i helped you
Click to expand...
Click to collapse
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Can you please explain the steps in detail which you have followed, so that i can try to help...
Badboy800 said:
Hi
No i flashed the Nordic firmware first and then the ROM. I have even tried to flash it with diffrent CMW, 4.0.0.2 and 6.0.0.1 but the problem is still there
Click to expand...
Click to collapse
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
mj.vikram said:
Can you please explain the steps in detail which you have followed, so that i can try to help...
Click to expand...
Click to collapse
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Kartik pat said:
Ill tell u my steps what i did:
First i reverted back to gb using cwm backup den i did a factory reset n wiped cache.. Den i flashed the stock nordic firmware n den flashed the rom n before rebooting the device i wiped cache n delvik cache.. And it worked for me try dis if i want to
Hit thanks if i helped you
Click to expand...
Click to collapse
Yes that may work, i will try it today.
Thanks buddy
Badboy800 said:
Okey, i came from Blueberry ROM 1.0 and here is the steps i followed:
1: Flashed the Nordic I9103XXLQ9 ROM USIN Odin v3.07
2. Booted up once to the rom to check if its had installed correctly
3. Flashed CMW 4.0.0.1 with Odin
4. Done a factory reset, wiped cache and dalvik cache
5. Flashed the Rom and after the process was complete from CMW, i restarted the phone but got stock on the Galaxy R splash screen and the phone restarted back to CMW.
6. Tried to wipe cache and dalvic cache again but still the phone wont boot up.
its so weird!
Click to expand...
Click to collapse
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
mj.vikram said:
Are you selecting Install zip file/update from Zip option in CWM, Sorry for asking the silly Question because i just want to confirm it...
Click to expand...
Click to collapse
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Badboy800 said:
Its okey Yess i do. I manage to flash it from both cmw versions so i dont think the problem is there. Should i go back to GB and then try the process?
Click to expand...
Click to collapse
First, u are coming from deodexed Rom.
Do one thing.. just install ur backup(if u took that one). Then install xxql9 using odin v 3.07(do run as administrator) & Then let it boot. Switch off the mobile and After that install CMW v4 & Then let it boot again. Again switch off ur mobile. Go to recovery install MOD rom. Dont wipe anything. It will do it by itself. Boot again. Let feel happy..
Sent from my GT-I9103 using xda premium
How to install this rom on stock GB?
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
vivekmaru said:
I am currently on stock GB (Indian vesion). Can I directly flash this rom via CWM 4?? The Q&A in rom's post says there is no need to flash XXLQ9 first, but everyone is suggesting to flash that first?
Click to expand...
Click to collapse
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Kartik pat said:
Yaa it will be better if you flash XXLQ9 first and then the rom so that u can enjoy all the features!!
Hit Thanks If I Helped You
Click to expand...
Click to collapse
Well.. I already flashed the Angeek's ROM via CMW before you replied and the ROM seem to work fine. Any idea on what features I may be missing on?
Hey Guys I have Sony Xperia U ICS ST25a 6.1.1.B.1.10 Unlocked BL
I have problem with installing The Fidelity ROM http://forum.xda-developers.com/showthread.php?t=1889581
or any other ROM like The Experience Rom or The Brains
the problem is when I flash the ROM and reboot the system I stuck and it reboot again and again
I wipe cache and I rest factory and do it with the right steps but it dont launch the ROM
but there is the MIUI ROM that I installed didnt stick like that
please guys help me I really want to try some other ROMs
and Thanx anyway
Re: Xperia U
Try reflashing a CM9 based kernel... And do a clean install again...
predatOr said:
Try reflashing a CM9 based kernel... And do a clean install again...
Click to expand...
Click to collapse
I will try that thanx for reply
predatOr said:
Try reflashing a CM9 based kernel... And do a clean install again...
Click to expand...
Click to collapse
what about the brains and fidelity not launching
for the CM9 it is not flashing its show me INSTILLATION ABORTED
maybe kernel
maybe your installed rom is not compatible to your current kernel. try to download a compatible kernel for your rom, install it using fastboot. if your kernel have built in CWM, do wipe data, cache. then flash again your rom.