I started out with the standard 3.2 on my Xoom Wifi
with a nagging system message to update (I am guessing 3.2.2)
So I followed thread 1249798 and now am unlocke & rooted!
I am also using Recovery: Eos Recovery R6
I still get the nagging system message to update.
I would like to load a custom ROM, probably Moray.
My questions are this:
1. Will the Nagging system update message cause a
problem loading a custom ROM?
2. I could use the process as described in thread 1249798
to load the ROM, but I have read that since I am rooted
I could use Quick Boot app. Is this true? What about the
ROM Manager app, could I use this to load Moray? What is
the difference?
3. Since my base is 3.2 I am guessing I cannot load any
EOS ICS Rom's, is this correct? I need to bring my base
to 4.0 right?
4. Both Hammerhead and Moray state that they are both:
"Pre rooted with su and Superuser". Does this mean I did
not have to root my Xoom, I could have just loaded either
of these Roms and become rooted?
5. I have read some comments about:
/system/etc/install-recovery.sh
If I remove this file, will this stop the nagging System Update message?
6. Do I need to back anything up prior to loading a ROM?
Thanks!
First, avoid ROM manager.
Second, you can flash an EOS ICS ROM. you just have to do a full data wipe. I would suggest doing that.
Sent from my MB860 using xda premium
Related
So, I am going to do a lot more research prior to rooting, but I had a couple of general questions that I was wondering about, before I begin the steps leading up to rooting.
1) I presume the easiest way for me to root my Thunderbolt is the Revolutionary Root? This will take be through rooting and installing the CW recovery that I need, correct?
2) Right after I root, If I want to install roms/kernels? than I can just get Rom Manager from the android market?
3) Once I install Rom Manager, can I just flash a rom that is compatible with my Thunderbolt? Can I just flash a kernel that is compatible with the Rom?
I suppose where I get a lil lost is the flashing compatibility part. What kernels work with what roms, what roms I can flash... I have read a number of articles, so I suppose what I'm asking is...
Will the process more or less be: Revolutionary Root, Install Rom Manager from market, flash a rom (just the most popular one). Is the Kernel flashing piece important? Do I need to flash a different kernel? Is it easy to tell in Rom Manager which kernel/rom I can use?
Yes use revolutionary to root and install custom recovery (cwr). You can use ROM manager to download custom roms if you want, only roms for your device will show up. Or you can download custom roms from forums, this is the method I prefer.
Just use kernel that comes with the Rom for the time being some developers include a custom kernel and others make modifications to the HTC kernel itself. Kernels are seperated in development section having to do with sense and aosp that is the first way to seperate them. Second would be leak the kernel was based on such as imo test 3.8 was based on newest leak so it works for just about if not all newest sense roms. When in doubt fire up a question in the Rom thread itself and ask what kernels those people are using, find a Rom like BAMF or thunderstick or synergy where the developers or support staff are very active.
Also you will need to flash a new radio right after rooting if you are still using froyo, I am using newest leak but different phone work differently. Once you install the radio VIA Hboot. Reboot phone and remove zip file from root of SD card now place your Rom image on SD card and reboot to recovery and install your new Rom.
Sent from my Thunderbolt using XDA App
This is good info.. thanks.
Well, I am upgraded to Gingerbread as of VZW's last update and still unrooted and stock.
So, if I were to root (using revolutionary) and install Rom Manager... could I just install something like Cyanogenmod or BAMF right through Rom Manager?
What do you mean by kernel that comes with the Rom? The kernel that is listed to use with the Rom? Or do you mean if I flash BAMF or something popular, just leave whatever kernel I have as is?
Bwangster12 said:
This is good info.. thanks.
Well, I am upgraded to Gingerbread as of VZW's last update and still unrooted and stock.
So, if I were to root (using revolutionary) and install Rom Manager... could I just install something like Cyanogenmod or BAMF right through Rom Manager?
What do you mean by kernel that comes with the Rom? The kernel that is listed to use with the Rom? Or do you mean if I flash BAMF or something popular, just leave whatever kernel I have as is?
Click to expand...
Click to collapse
When you flash a rom it flashes the kernel too with whatever one the devs packed with it.
Sent from my HTC ThunderBolt using Tapatalk
Okay, clear enough.
So, for someone like myself, just use revolutionary root, install rom manager and play around a lil with flashing roms using rom manager for awhile. I understand that I can install roms from my SD card, but it sounds like at least initially installing roms right from rom manager would be the simplest. I can also not worry about installing a different kernel during this "honeymoon" phase. Just pick the latest version of whatever Rom I want and flash the rom?
After you root you need to install superuser so CWM can function. I have read that some people flash their CWM via hboot after s-off and then go right to recovery to flash the root gaining RUU, then enjoy your root.
Do not flash ROMs right from CWM reboot to recovery clear data/cache and under advanced davlik cache and then install Rom from install from SD and choose zip file and I always store mine in downloads since I download all my roms right to my phone and download md5 checker from market and always check the md5 if it does not match don't think its a mistake redownload and try again.
Sent from my Thunderbolt using XDA App
Agreed, it is better to install the ROM through recovery instead of installing through ROM manager as sometimes it doesn't work right.
Don't forget to use thank you for all you great answers.
Sent from my Thunderbolt using XDA App
Several months ago I purchased a NS4G on Craigslist. I wanted to use it as an iPod touch without the data. It came rooted with SuperUser. The phone keeps prompting me to OTA to 2.3.7 (it's currently on 2.3.5) I used Gingerbreak to unroot and it worked, SuperUser is now gone. However, ClockWorkMod Recovery is still present and 2.3.7 won't install. The phone reboots, goes to about 1/3 of the progress bar, and then fails. I just want to get the phone on completely stock 2.3.7, in preparation for the coming 4.0 OTA.
Hopefully the solution doesn't involve flashing a custom ROM, I've never done that before. Thanks!!
No need to get it OTA, you can just flash the stock ICS ROM found in the stickies of the development forum of this phone. Of course follow instructions closely.
Sent from my Nexus S using xda premium
But I'm selling it and need it to be completely 100% original and stock, which is what the buyer requested..
You want to use fastboot to flash a stock recovery. Peter Alfonso has them all listed on his site.
Thanks. I'm really not familiar with fastboot, and is there any way you could give me a link with instructions or the files I need? My build number is GRJ90.
And if there's anyway for me to avoid a rooted stock ROM, that'd be great. Just pure stock 2.3.7.
The stock image on Rom manager has the recovery bootloader included.
Flash a stock gb rom from cwm. You will find a list of them in either general or android development threads, not sure which. Completely stock, unrooted and as far as I remember the stock recovery is included. If not then the person will never know anyway as if someone doesn't want any non stock features then they won't know how to get to recovery anyway.
Actually I don't think they have stock recovery. Just flash the stock rom and then fastboot flash the stock recovery like was mentioned above. All you need to type is:
Fastboot flash recovery xxxxx.img
Xxxxx.img is the name of the image file you download.
Don't cheat the buyer...Tell him exactly what he's buying...And that you returned thedevice back to stock again.It's just not worth it.
I just rooted my TF101 using ViperMod but now I'm not sure whether I should install CWM recovery or not if I want to install further OTAs. I have read some threads but couldn't come up with a clear answer. I read somewhere that only stock recovery can receive OTA updates but also read that CWM can receive them too. If I can't install CWM then what ROMs can I install with stock recovery? What's the best way to go if I want to be ready for the ICS? Thanks!!
theremix said:
I just rooted my TF101 using ViperMod but now I'm not sure whether I should install CWM recovery or not if I want to install further OTAs. I have read some threads but couldn't come up with a clear answer. I read somewhere that only stock recovery can receive OTA updates but also read that CWM can receive them too. If I can't install CWM then what ROMs can I install with stock recovery? What's the best way to go if I want to be ready for the ICS? Thanks!!
Click to expand...
Click to collapse
Technically you'll still receive the OTA update you just can't apply it if you have CWM or a custom ROM installed.
You can't install custom ROM without CWM (if you have an older SBK tablet you can use NVFlash with a compatible ROM).
So I shouldn't install cwm until the ICS drops right?
Sent from my Transformer TF101 using Tapatalk
If you want to update to ICS via OTA don't instal CWM.
As you have been told, you will get the OTA message but the update will fail.
So you have two choices (or three):
* Keep stock recovery and update to ICS when the OTA update is available
* Install CWM and update to ICS as soon as a DEV publishes an ICS ROM
* Install CWM and remove it as soon as you know the OTA is due (pretty lame, but you could do it).
Regards.
CalvinH said:
If you want to update to ICS via OTA don't instal CWM.
As you have been told, you will get the OTA message but the update will fail.
So you have two choices (or three):
* Keep stock recovery and update to ICS when the OTA update is available
* Install CWM and update to ICS as soon as a DEV publishes an ICS ROM
* Install CWM and remove it as soon as you know the OTA is due (pretty lame, but you could do it).
Regards.
Click to expand...
Click to collapse
Thanks, I think I'll just wait for the OTA as I want to update as soon as ICS drops in.
Sent from my PC36100 using Tapatalk
I have a question about removing CWR. Actually 2.
1. Can't we just uninstall and wipe data with Titanium since it was installed as an .apk- from Gnufabio? (pretty sure this won't work but thought I would throw it out there anyways). Where is the recovery located on a tablet (what folders) Same as in phones?
2. Can we just flash the stock recovery by itself and not reset back to .13 or younger? If I am running stock ROM, it seems that I should be able to just reflash the stock recovery and replace it w/o changing the ROM or factory reset.
I have no problem doing it the long way but if it doesn't need to be done and we can replace the CWR with stock and not tamper with the ROM, it seems logical.
Clearly I just got the tab recently and have been reading and reading but they seem so much different than the way phones work. I am very comfortable flashing ROMs/Kernels/Mods on phones, but just a little intimidated with the tablet (for now).
Woodrube said:
I have a question about removing CWR. Actually 2.
1. Can't we just uninstall and wipe data with Titanium since it was installed as an .apk- from Gnufabio? (pretty sure this won't work but thought I would throw it out there anyways). Where is the recovery located on a tablet (what folders) Same as in phones?
2. Can we just flash the stock recovery by itself and not reset back to .13 or younger? If I am running stock ROM, it seems that I should be able to just reflash the stock recovery and replace it w/o changing the ROM or factory reset.
I have no problem doing it the long way but if it doesn't need to be done and we can replace the CWR with stock and not tamper with the ROM, it seems logical.
Clearly I just got the tab recently and have been reading and reading but they seem so much different than the way phones work. I am very comfortable flashing ROMs/Kernels/Mods on phones, but just a little intimidated with the tablet (for now).
Click to expand...
Click to collapse
1- The RecoveryInstaller app only help to flash the recovery image so no you can just delete it.
2- You can flash a stock recovery image via CWM. You can get a repacked version here.
http://forum.xda-developers.com/showthread.php?t=1154947&highlight=unroot
baseballfanz said:
2- You can flash a stock recovery image via CWM. You can get a repacked version here.
http://forum.xda-developers.com/showthread.php?t=1154947&highlight=unroot
Click to expand...
Click to collapse
I figured that would be the case with the executable part of the apk.
I read that thread but wasn't sure if only the stock recovery by itself could be flashed w/o the prepacked ROM.
Hi!
I just bought Nexus S i9023 and don't know how to start flashing roms, kernels etc. I was reading about that I must unlock bootloader first, flash cwm recovery and then i can finally flashing roms. Is it right? I have few questions about this device, here they are:
1. How are kernels flash? Is it flashing by recovery like update.zip?
2. I have Gingerbread currently, but I want to update to JB, can I first off apply the update in recovery or I have to update to ICS first? Can you provide me a link to updates?
3. http://android.clients.google.com/packages/ota/google_crespo/9ZGgDXDi.zip this is JellyBean for i9023, right?
4. What are the kernel and rom combo most stable and fast?
5. Internal memory is working like a SD card, so if I will make a nandroid backup, it will not erase my data while doing full wipe ... ?
6. I'm currently using my private MIUI GB on my Xperia X8, which was ported from SGS. Is there any multilanguage MIUI GB rom anywhere?
7. Which is the flashing order? Kernels first? Or roms?
Thanks for replies, guys!
:cyclops:
Yes, you must unlock the bootloader, which will wipe EVERYTHING on your phone before you can flash your desired recovery and root. Kernels are flashed through recovery, after a ROM is flashed, otherwise it will generally be overwritten if a new ROM is flashed. No need to go to ICS to get to jb if you are flashing a full ROM. The memory referred to as internal is not what is used as an SD card. The SD/USB memory is the external memory. A nandroid doesn't back this up.
Sent from my ns4g using Tapatalk 2
p1gp3n said:
Yes, you must unlock the bootloader, which will wipe EVERYTHING on your phone before you can flash your desired recovery and root. Kernels are flashed through recovery, after a ROM is flashed, otherwise it will generally be overwritten if a new ROM is flashed. No need to go to ICS to get to jb if you are flashing a full ROM. The memory referred to as internal is not what is used as an SD card. The SD/USB memory is the external memory. A nandroid doesn't back this up.
Sent from my ns4g using Tapatalk 2
Click to expand...
Click to collapse
I just picked up a secondhand i9020T. It's running stock jelly bean, but it looks like the previous owner had some custom ROMs installed. The bootloader is unlocked and clockwork mod recovery is installed. I don't seem to have root access. Can I just flush a full ROM, like CM10 through clockwork even though I don't have root access? Will doing that provide root in CM10, or is that going to cause a problem. Thanks.
naguziew said:
I just picked up a secondhand i9020T. It's running stock jelly bean, but it looks like the previous owner had some custom ROMs installed. The bootloader is unlocked and clockwork mod recovery is installed. I don't seem to have root access. Can I just flush a full ROM, like CM10 through clockwork even though I don't have root access? Will doing that provide root in CM10, or is that going to cause a problem. Thanks.
Click to expand...
Click to collapse
You might could get by just flashing cm10 and gapps, but I would start by flashing superuser, or super su for jb.
Sent from my ns4g using Tapatalk 2
Yo, thanks, I successfully unlocked my bootloader and flashed cwm, then installed fresh miui jb and gapps. I searching for good kernel for daily usage, with good performance, can you recommend me any?
cheers
p1gp3n said:
You might could get by just flashing cm10 and gapps, but I would start by flashing superuser, or super su for jb.
Sent from my ns4g using Tapatalk 2
Click to expand...
Click to collapse
So i'm a little confused. The stock rom as of now has the superuser app, but when I open something that tried to pull root access (titanium backup or root checker for example) the superuser app does not come up, and root access is not available. Thoughts? When I flashed ROMs on my old transform, root seemed to travel with the kernel - but I just want to make sure I can flash a rooted ROM+kernel through recovery without having root access. Sorry if these questions are a bit naive - I'm trying to work through the other guides and Q+A to try to figure this out, but I'm still not clear. Also, sorry for sort of hijacking your thread, but the topic seemed like a good fit. Thanks in advance for all help.
*Edit - Fixed root access in stock rom by flashing new SU app through CWM from link posted in second post of this thread: http://forum.xda-developers.com/showthread.php?t=1918490&highlight=have+clockworkmod+but+no+root
Last question, if I flashed JellyBean based rom, can I flash Gingerbread based by following the steps like formatting system etc. in recovery previously?
The su app from the play store is just an app. as you found, flashing the su zip is the only way to actually get the su access.
Anytime you flash a new rom, it is highly recommended that you perform a full wipe, after making a nandroid, of course. The steps I follow are factory reset/data wipe (this will also take care of cache & dalvic cache since they are on the data partition) then go to mind and storage to format /system & /boot.
If you haven't already I suggest using titanium backup & the pro key if you can. I have it set to automatically backup everything every 2 days, and I also make a new one each time I get ready to flash anything. Don't restore any system apps per data off you change roms though. The only reason I backup the system stuff is so I can restore my texts & call log with the proper time stamps.
Sent from my ns4g using Tapatalk 2
Hello,
i was wondering if someone could answer some questions that i have about android and the asus tf700t.
now i already searched on google and on xda but there are so many informations and i just cant tell which one is the "best" or the right one.
My Asus is unlocked. i got that far and didnt think it would be too hard to root but i see command lines and/or 3 different kinds of software or files that i have to download first or programs like unlockroot etc.
so i was wondering if you could answer me a few questions.
1. do i need to root to put on a custom rom or is it enough that the device is unlocked?
2. what is the easiest and safest way to root?
3. what are 3 good custom roms?
i have android 4.1.1 on my asus and heard that 4.2 is out so i would like to update it but i never had an android device until now so i just want to make sure i m not destroying it after 3 months of use.
Thank you very much
Ben
Custom ROMS are pre rooted, usually, so you best bet would:
1. Update to stock 4.2.1
2. Root using Motochopper
3. Download GooManager(give root rights') from Play Store and Install TWRP by installing open script recovery.
4. Perform a factory reset via TWRP, without wiping Internal storage, or MicroSD card.
5. Install CromiX or CyanogenMod
There are other ROMS out there, but it is advised to install CromiX first because it is stock based and can be flashed over the stock ROM.
Also, make sure you know how to get into the recovery manually, and make sure you check files before flashing to make sure things downloaded properly.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
ROM: CleanRom Xenogenesis 4.4 DeOdex
Kernel: Hundsbuah's V3.0.5 OC Kernel
Theme: Timberwolf's Blues and Jazz Theme
Thank you for the short guide....
but here is the first problem i have....
i dont know how to upgrade to 4.2.1. or if that update is available for my device yet. some pages said it is. some said its not available.
i have no idea where to get it since over the air update is not possible due to the unlock.
ben9000 said:
Thank you for the short guide....
but here is the first problem i have....
i dont know how to upgrade to 4.2.1. or if that update is available for my device yet. some pages said it is. some said its not available.
i have no idea where to get it since over the air update is not possible due to the unlock.
Click to expand...
Click to collapse
Asus pulled the JB 4.2.1 firmware off their website, probably because they realized it had too many bugs. They probably are working on a new release and I would wait for it.
In the meantime read the forums and familiarize yourself with the process of rooting, installing a custom recovery and flashing custom roms.
If you don't want to wait, search for the forums on the Motochopper tool. I believe you can also use it to gain root under 4.1, but I'm not 100% sure.
If you have root, download Goo Manager, tap the 3 dots in the upper right and choose: Install open recovery script.
This will install the TWRP 2.5.0 custom recovery.
Boot into TWRP and select 'Backup'. This will give you a nandroid backup of your current system. Copy it to a safe place.
Next, you still being on 4.1, you need to flash the JB 4.2 bootloader which is version 10.6.1.14.4. You'll find a link in post 1 of the Cromi Xenogenesis thread in the development section. The dev packaged it with TWRP 2.5. It doesn't hurt to re-install TWRP.
Also download the latest release of the Cromi-X (ODEX) ROM, currently 4.4.1, and place both zips into the root of your internal or external SD card (your choice).
Boot into recovery, choose 'Install', navigate to the 10.6.1.14.4 bootloader/TWRP zip you downloaded and swipe to flash it. After installation the tablet will reboot into your old rom - this is fine.
At this point, just to be safe, you may want to check if you have the correct bootloader installed: Boot up with Vol Down and Power button and read the tiny script. It gives you the bootloader version.
If you're 100% sure you have the correct bootloader and TWRP 2.5.0, proceed:
Boot into TWRP recovery again, select Install, select the CROMIX 4.4.1 zip and flash it.
The Aroma installer will start and give you options to choose from. Stick with most of the default options for the beginning. You can always re-flash the rom with a different set of options selected.
Enjoy!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD