Please Donate your contribution in the below link...
http://pledgie.com/campaigns/17567
As many of you know Epsylon3 from CM Team is ready to help us in porting CM 7/9 but we need to provide then Galaxy R.
Epsylon3 is buying this device just to help us on my request, he already owns 3 devices (2 defys and 1 atrix) that is why we need to provide him Galaxy R.
****[UPDATE]****
Friends,
Im very proud to say that
WE REACHED OUR GOAL!!!
I want to thank all of you for this achievement. Finally we did it and Now Epsylon is having what is needed to start the work.
Thank you very very much once again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Found this on French online, http://www.ldlc.com/fiche/PB00124931.html
http://www.saholic.com/mobile-phones/samsung-galaxy-r-i9103-1002157
cant trust the website
Sent from my GT-I9103 using XDA
vipul12389mehta said:
http://www.saholic.com/mobile-phones/samsung-galaxy-r-i9103-1002157
cant trust the website
Sent from my GT-I9103 using XDA
Click to expand...
Click to collapse
No the Website is well Trusted!! So No Problem with that
http://www.ebay.com/sch/Cell-Phones...ocalstpos=&_nkw=samsung+i9103+galaxy+r&_clu=2
I think It has E-BAY BUYER PROTECTION, also from Paypal i think
donate
voted for 10$, but can donate 50-100$ if needed. cant wait for ICS on R
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Here is the full story
I'm also in Atrix dev team which is a similar phone and made some recovery and bootmenu work on it...
Working on this phone will help the 2 devices, even if Atrix one is already almost fully working (camcorder is still buggy)
Epsylon3 said:
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Here is the full story
I'm also in Atrix dev team which is a similar phone and made some recovery and bootmenu work on it...
Working on this phone will help the 2 devices, even if Atrix one is already almost fully working (camcorder is still buggy)
Click to expand...
Click to collapse
Hi Epsylon3 welcome to Galaxy R,
i am very happy to see you on our forum, our Galaxy R users will be very much thank full to you..
Epsylon3 said:
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Click to expand...
Click to collapse
Hi buddy,
Thanks for showing interest in developing CM 9 for our device.
If possible elaborate & give us a rough idea on how you'll go about the development of CM 9 for SGR. It could help in keeping the expectations of people donating here close to reality. But ofcourse I am not asking for exact ETAs just some rough structure on how will the development go on and if other CM devs (eg LG O2X devs) will be involved in developing CM 9 for our device ?
Moreover 'supercurio' is also from France, it would be nice if you could cooperate with him and help in unlocking the full potential of the quality sound chip we have on R. He has already made progress in developing a Voodoo MOD for our device & if you could cooperate with him we can get official support & updates from supercurio for our device. Would it be possible ?
----------------------
I just have a big noob question, if you don't mind kindly clarify.
We don't have an ICS kernel as the ICS update for R isn't out yet. As per what a fellow member said (who was trying to develop CM 7 / 9 for our device) CM 9 requires kernel 3.0, so does that mean you'll build the kernel 3.0 for our Galaxy R from scratch ?
------------------------
I hope that I'm not asking too much.
BTW I have studied French at school level and found it to be pretty suave most of the times & sometimes a complex language. Another reason for which I loved it was because it was high scoring subject.
Cheers !
'cooleagle' said:
Hi buddy,
I just have a big noob question, if you don't mind kindly clarify.
We don't have an ICS kernel as the ICS update for R isn't out yet. As per what a fellow member said (who was trying to develop CM 7 / 9 for our device) CM 9 requires kernel 3.0, so does that mean you'll build the kernel 3.0 for our Galaxy R from scratch ?
------------------------
Click to expand...
Click to collapse
cooleagle, I was going through Epsylon3's work on bringing ICS to Defy. From the demo videos, it seems to run CM9 Nightly on 2.6.36 Kernel. I hope we may not need kernel v3 to run ICS. Again, Pls correct me if i'm wrong.
emanoj.i9103 said:
cooleagle, I was going through Epsylon3's work on bringing ICS to Defy. From the demo videos, it seems to run CM9 Nightly on 2.6.36 Kernel. I hope we may not need kernel v3 to run ICS. Again, Pls correct me if i'm wrong.
Click to expand...
Click to collapse
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
mj.vikram said:
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
Click to expand...
Click to collapse
I am just trying to gather info by discussions:
In that case do we lose any features/functions if we keep on using the GB kernel in the CM9 build ?
And what happens when ICS is released for our device, will the dev have to start from scratch once again to get CM 9 with ICS kernel running or will it be an easier process ?
mj.vikram said:
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
Click to expand...
Click to collapse
The Froyo kernel is for certain Defys with a different camera (SoC version) and the Gingerbread Kernel is for the other type of Defys (Bayer module) and Defy+
This was sent from a Galaxy Ace. Problem?
Я за ics : Круто:
Android is not locked to a specific kernel version... but proprietary libs (and nvidia ones are a good example) are made for the kernel shipped with them.
Defy froyo (and gb) kernels are 2.6.32 but with some advanced moto features like the usb gadgets, we had the luck to have almost all the stuff required for ics.
One missing GL_OES api is making hwui port very hard. But that is not exactly a missing kernel feature.
Most GPU libs are bought by vendors and are proprietary sets of prebuilt objects (.lib) and headers, for the omap they come from the SGX DDK
So to answer on how i want to start... I think we need first a CM 7.2 port, to reduce and test before the possible problems.
Making a CM rom is not a zip kitchen... It require sources for almost all, a few ones can be grabbed first from existing gb roms, some will always be proprietary (nvidia ones).
Kernel work should only be done if there is no other ways... Since we are locked to the nvidia layer, changing the kernel generation can break all...
I dont know yet if there is available source code published, checking...
EDIT: i got kernel samsung sources of 2.6.36.3 kernel (Feb 2012), and a few other things from samsung
could somebody confirm me the wifi/bt chip is a bcm dhd ? and if fm radio is supported by the phone ?
EDIT2: we get interresting stuff when "diffing" kernel updates : https://gist.github.com/2890552
ps: github epsylon3 is my secondary account for tegra stuff
@Epsylon3
Thanks for responding. Do tell us if it would be possible for you to cooperate with 'supercurio' for Voodoo sound.
This handset does have FM Radio support but I have no info about the broadcom chip will check and revert.
Edit: There are some internal chipset diagrams of Galaxy R here on xda itself.
Do you remember the chipset numbers of some common bcm chips which are used in mobiles ? If you do then checkout the diagrams below it could help.
Kindly check your PM
Cheers !
@Epsylon3
We have a great gingerbread kernel made from Samsung's sources by ardatdat. Most people here I think use this kernel as it solves some problems of Samsung's kernel, like inability to count 3G traffic.
You can find it here: https://github.com/ardatdat/GalaxyR-i9103-Kernel
The device does have a FM radio.
I don't have an easy way to detect the bt/wifi module but my device shows dhd module as loaded.
Code:
$ lsmod
dhd 236992 0 - Live 0xbf015000
Si4709_driver 36073 0 - Live 0xbf006000
bthid 3547 0 - Live 0xbf000000
mrsaccess said:
@Epsylon3
We have a great gingerbread kernel made from Samsung's sources by ardatdat. Most people here I think use this kernel as it solves some problems of Samsung's kernel, like inability to count 3G traffic.
You can find it here: https://github.com/ardatdat/GalaxyR-i9103-Kernel
The device does have a FM radio.
I don't have an easy way to detect the bt/wifi module but my device shows dhd module as loaded.
Code:
$ lsmod
dhd 236992 0 - Live 0xbf015000
Si4709_driver 36073 0 - Live 0xbf006000
bthid 3547 0 - Live 0xbf000000
Click to expand...
Click to collapse
i mean, does somebody has seen it working on stock roms ?
because the Atrix has the chip bcm4329 FBGA(WLAN/BT+FM+EDR) for it but its not linked in hardware :/
for the wifi/bt... i ve atrix schematics too... i will check the chip size
thanks for the link... i will try to link to my test repo : https://github.com/epsylon3/
yours is a bcm4330 : http://www.logictoyz.com/cell-phone...rated-bluetooth-4-0hs-and-fm-transceiver.html
6x6mm
Yes, the FM radio is officially a feature of the phone.
I have only used it with Samsung's app though. Works great with ardatdat's kernel too.
EDIT:
I am not sure if we have bcm4330 because our bluetooth is v3.0 I think.
ive seen that in kernel sources, bcm4330 folder is part of samsung changes
Related
Yes, I brought this out of its dev status and into "Alpha 0" status. That's zero for zero data, zero camera, and zero kanged from Evervolv so don't even bring that up. I compiled this from the msm8660 source provided by qualcomm. You can check it out in the links below. Please feel free to rename, re-upload, reuse, recycle, or do whatever with this, just make sure you actually improve something and throw my name in the credits.
Please note that the I9100 is not the I727 and any code that is released for them will be of little to no use to our community. Just a heads up, if you post something about the I9100 in this forum, you will probably get flamed.
Features
ICS
AOSP
mohan's modified UCLA4 kernel
And that's it
Pics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source
Link to source ------> Here
Want To Help Us Fix Stuff?
Isotope Source (Precompiled) -------> Here
CAF-ICS Device Tree -------> Here
Build Instructions ------> Here (Read the README File)
Inspirational Mountain ------> Here
Changelog
Code:
Alpha 4:
[LIST]
[*]Fixed calling in+out, fixed sms in+out
[*]Added framework.jars from ICS leak in attempt to get data working, but no dice.
[*]Removed Herobrine
[/LIST]
Alpha 3:
[LIST]
[*]Fixed wifi
[*]Can mount external_sdcard, read from both
[*]ICS kernel added (thanks to mohan, this will make fixes much easier)
[*]Empty signal bar icon following me around
[/LIST]
Alpha 2:
[LIST]
[*]Fixed laggy graphics issue (only took about a month and a half)
[*]More kernel tweaks for ICS
[/LIST]
Alpha 1:
[LIST]
[*]Fixed Rotation
[*]Fixed Boot Loop Issue
[/LIST]
Alpha 0: First release, no changelog
Installation
Put rom on sdcard
Head into recovery
Wipe data/factory reset
Install zip
Reboot
Misc. Stuff
topprospect's Github (GB AOSP) ------> Here
Downloads
Google Apps for ICS: Here
Alpha 4: Here
What Works
The Bare Minimum
Mounting the external_sdcard
Wifi
Reading from sdcards
Lights For Capacitive Buttons
Rotation
SMS In+Out
Calls In+Out
What Doesn't Work
GPS
Data
Camera
Audio
Mounting the internal_sdcard
Much, much more
Known Issues
A Red Box will rarely appear along the boundaries of the screen. This is due to the nature of the build (eng)
Sometimes the signal bars will go off for a few seconds. Could be a ril issue, could be something else.
Many, many more
Help with fixing any of these issues is always appreciated.
lets see where this gets us
the kernel is definitely an issue. xboarder said he had someone working on one, so maybe try the kernel he had used to get his up and running (from what i saw in the videos at least).
orlandoxpolice said:
the kernel is definitely an issue. xboarder said he had someone working on one, so maybe try the kernel he had used to get his up and running (from what i saw in the videos at least).
Click to expand...
Click to collapse
Was he using Da_g's CM7 0.43pre4, or was he just using Da_g's regular? Difficult to tell from the video...
its a totally modifed kernel of drags i almost got signal working on mine too from my private tester
you will need drivers btw to get it booting to man not that easy i had to build my whole device tree it will be open sourced when i have build released
xboarder56 said:
its a totally modifed kernel of drags i almost got signal working on mine too from my private tester
Click to expand...
Click to collapse
Ah, ok. Way to go on the signal thing.
you will need drivers btw to get it booting to man not that easy i had to build my whole device tree it will be open sourced when i have build released
Click to expand...
Click to collapse
Yes, I know I need drivers to get it to boot. However, this isn't just compiled AOSP 4.0.3 (if that's what you were thinking) this is a release from qualcomm based on the msm8660 chipset (which we have in our phones) I also never said it was easy... Why don't you just release your code right now? The community would really appreciate it.
jomeister15 said:
Ah, ok. Way to go on the signal thing.
Yes, I know I need drivers to get it to boot. However, this isn't just compiled AOSP 4.0.3 (if that's what you were thinking) this is a release from qualcomm based on the msm8660 chipset (which we have in our phones) I also never said it was easy... Why don't you just release your code right now? The community would really appreciate it.
Click to expand...
Click to collapse
no man sorry dont want to release a half assed product you will have to make a ics kernel to get it to boot at all
xboarder56 said:
no man sorry dont want to release a half assed product you will have to make a ics kernel to get it to boot at all
Click to expand...
Click to collapse
Fair enough. Although how about maybe sliding that kernel source my way, eh? *nudge* *nudge*
jomeister15 said:
Fair enough. Although how about maybe sliding that kernel source my way, eh? *nudge* *nudge*
Click to expand...
Click to collapse
dont worry about kenrel source rom hasnt been released yet so when rom is posted i will have kernel source with it for everyone to use as soon as rom is built
comon X, the more people on board the faster we can get ICS for this darn phone!
xboarder56 said:
nope sorry man only my development team will see it
Click to expand...
Click to collapse
Welp can't say I didn't try. Back to my Linux partition it is then.
Edit: Oh, hey r4ins, while your on could you update your torrent links for my new update, 1.3.1? That'd be great.
R4INS said:
comon X, the more people on board the faster we can get ICS for this darn phone!
Click to expand...
Click to collapse
lol i all ready have it on my phone it will come when it comes i got to get back to work getting back to work on signal and audio
xboarder56 said:
lol i all ready have it on my phone it will come when it comes i got to get back to work getting back to work on signal and audio
Click to expand...
Click to collapse
Just saying, the more the better when it comes to development. I'm running ICS on two devices, just not my skyrocket
---------- Post added at 10:39 PM ---------- Previous post was at 10:38 PM ----------
jomeister15 said:
Edit: Oh, hey r4ins, while your on could you update your torrent links for my new update, 1.3.1? That'd be great.
Click to expand...
Click to collapse
Downloading your roms now.
R4INS said:
Just saying, the more the better when it comes to development. I'm running ICS on two devices, just not my skyrocket
---------- Post added at 10:39 PM ---------- Previous post was at 10:38 PM ----------
Downloading your roms now.
Click to expand...
Click to collapse
im running it on 2 devices
i only got phone 2 days and nobody else even had ics working man
xboarder56 said:
im running it on 2 devices
i only got phone 2 days and nobody else even had ics working man
Click to expand...
Click to collapse
my tablet is running it and an old HTC of mine is running it. Tablet camera doesnt work (cm9), but the HTC is bug free and running tip top.
I wouldnt say yours is running on the skyrocket
What a horrible time to be grounded, i could totally been contributing to this. Darn. Good luck devs!
Sent via Telepathy
M0D1441 said:
What a horrible time to be grounded, i could totally been contributing to this. Darn. Good luck devs!
Sent via Telepathy
Click to expand...
Click to collapse
Ahhh M0D come on man you have to stop getting into trouble!! Tell me when you get your stuff back, would love to have your help with this.
jomeister15 said:
I don't know if anyone on here has seen the qualcomm release for the msm8660 (skyrocket chipset) that's been floating around, but I went ahead and compiled it into an otapackage.
Click to expand...
Click to collapse
Actually, no I haven't seen this floating source. Can you post a link to it? I have been trying to build up an android_device_skyrocket tree for use in AOSP or CM7 (without much luck..).
Thanks for this, btw! I think there are a bunch of us itching to get a real compile from source going for the Skyrocket. I don't even care about ICS or CM9 right now. My goal would be to compile AOSP 2.3 or CM7 from source.
topprospect said:
Actually, no I haven't seen this floating source. Can you post a link to it? I have been trying to build up an android_device_skyrocket tree for use in AOSP or CM7 (without much luck..).
Thanks for this, btw! I think there are a bunch of us itching to get a real compile from source going for the Skyrocket. I don't even care about ICS or CM9 right now. My goal would be to compile AOSP 2.3 or CM7 from source.
Click to expand...
Click to collapse
AOSP 2.3 or a fully functional CM7 would rock!
About this ROM
Community effort to bring CyanogenMod to the HTC One S aka Ville.
Disclaimer
Code:
This is no finished rom!
It has bugs and issues that still need to be fixed.
CM10
See this thread for CM10 development
IMPORTANT
Please make sure that boot.img is flashed correctly.
If in doubt, check kernel version in settings. Build date should always match rom date.
Description
This release contains the latest cm fixes and some backported CM10 changes like new GPS libs which are a lot more power efficient.
Changes
20120813
New GPS libs
Backported Jellybean changes
Latest CM changes
20120731
New kernel, make sure you flash boot.img
Latest CM changes
20120716
Configurable button layout
20120715
Changed button layout
Merged latest cm changes
20120708
Fixed Touchscreen
Reverted Kernel Memory Hack
Merged latest cm changes
alpha 14
Fixed LPA Volume
Kernel tweaks (lower sleep frequency, more memory)
Working
Configurable hardware buttons [20120716]
Touchscreen [20120708]
LPA Volume [alpha14]
Low Power Audio (LPA) [alpha13]
RILD should start properly [alpha12]
Wifi-Tethering [alpha11]
Camcorder, mostly (720p, 480p, no 1080p) [alpha10]
USB Tethering [alpha9]
Fixed data loss on reboot [alpha8]
Notification LED (we just have red OR green) [alpha7]
Audio routing [alpha6]
Front Camera [alpha5]
Torch [alpha5]
In-Call Echo gone [alpha4]
Bluetooth [alpha3]
Camera [alpha2]
Radio
Sound
Wifi
Known issues
Camcorder is unstable, videos may be corrupted
Panorama mode crashes the camera
Wifi calling not available
Instructions
Download or build from source
Download gapps
Recommended
fastboot flash boot boot.img
wipe unless you're upgrading from an earlier release
flash rom in recovery
flash gapps in recovery
Downloads
intervigil on [github]
xkonni on [github]
All versions & Changelog [here]
Also available on GooManager & RomManager
Latest gapps (ics-20120429) on [goo-inside.me]
Contact
irc-channel #cyanogenmod-ville on irc.freenode.net
Credits & Thanks (in no particular order)
The whole cyanogenmod team
intervigil
#cyanogenmod irc channel
#virtuousrom irc channel
everybody in #cyanogenmod-ville irc channel
Additional Information
Flow-Wolf said:
Hello everyone!
Today I have create an article with a full review about the CM9!
Here it is:
http://flow-wolf-one.blogspot.fr/2012/07/one-s-cyanogenmod-9-full-review.html
You can also see the video recorded for this rom:
http://youtu.be/dHrYeJrYW5U
Enjoy
and thanks the dev for his job
Click to expand...
Click to collapse
saniyal said:
Something more recent than Alpha 5
Click to expand...
Click to collapse
DevliegereM made some pretty nice banners:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please do NOT post Thanks..... Instead, press the Thanks button
Working:
Hardware Acceleration
awesome! i love this phone but a system partition filled with 800MB of crap is just crazy and seriously holding back this beast. i can't wait for cm9 on htc one s
i'd like to help however i am currently busy with finishing my thesis ... any chance for putting this on github? probably i find some time to compile and test it...
cheers!
jodue said:
actually i did say thanks AND asked if the OP would upload this on github for others to play with. so please stop deleting valid posts!
Click to expand...
Click to collapse
it is already on git: https://github.com/xkonni
hf
Midian666 said:
it is already on git: https://github.com/xkonni
hf
Click to expand...
Click to collapse
correct...
contributors very welcome!
xkonni said:
correct...
contributors very welcome!
Click to expand...
Click to collapse
Im ready to start working on it as my One S just arrived!
For those who want to contribute, xkonni and I can be found at freenode on #cyanogenmod-dev.
Ive also started to work on a getting-started wiki page here
no devs around? could really use help on the RIL...
--
im guessing though as before with ics builds..the camera will be even more of a problem now?
just done my backup going to see how this is going man.
just tried it mate..lovely, suprised you got it booted so quick,theres not even lag in it..
arknailed7754 said:
im guessing though as before with ics builds..the camera will be even more of a problem now?
just done my backup going to see how this is going man.
just tried it mate..lovely, suprised you got it booted so quick,theres not even lag in it..
Click to expand...
Click to collapse
i'm not really thinking about the cam yet. but you're right this will be a problem.
anyway, unless telephony/data work it doesn't matter ^^
No I meant the future cam not important yet lol
Sent from my HTC One S using XDA Premium App
Hopefully HTC will release the source code soon and if we are extra lucky they will release something for the ImageSense chip too!
Been busy lately but I really want to work on this.
Sent from my HTC One S using Tapatalk 2
How much work is going on with this guys is it intense or just weekends etc. I know its hard making time for this type of thing
Sent from my HTC One S using XDA Premium App
arknailed7754 said:
How much work is going on with this guys is it intense or just weekends etc. I know its hard making time for this type of thing
Sent from my HTC One S using XDA Premium App
Click to expand...
Click to collapse
quite a lot, but still have other things to do besides this
Well yeah...life lol
Sent from my HTC One S using XDA Premium App
xkonni said:
quite a lot, but still have other things to do besides this
Click to expand...
Click to collapse
xkonni is doing a lot more than me for the moment, but Im hoping to find time to work on it later this week. I figured its better to get all other stuff squared away so that I can sit down and focus on this instead of trying to do everything at once
good news!
i just saw that the kernel sources for the one v are on htcdev.com ready for download ... i guess this means that we shouldn't have to wait too long for the one s kernel sources
jodue said:
good news!
i just saw that the kernel sources for the one v are on htcdev.com ready for download ... i guess this means that we shouldn't have to wait too long for the one s kernel sources
Click to expand...
Click to collapse
maybe but i would not bet on that.
the one v uses the 8255 chipset, for that there are already many devices out while for our msm8960 the one s is the first.
they might keep the source back because of that.
but of course i hope they dont
xkonni said:
maybe but i would not bet on that.
the one v uses the 8255 chipset, for that there are already many devices out while for our msm8960 the one s is the first.
they might keep the source back because of that.
but of course i hope they dont
Click to expand...
Click to collapse
so you think that htc doesn't want to "help" other manufacturers with their kernel adaptations?
possible but i can't imagine what htc would gain by holding the kernel code back on purpose. actually i think that since the community is always fixing their bugs and issues they can only profit from an early release of the code ... but let's see and hope that you are wrong
Based on CM7 lastest build
Ported from 9000's official MIUI2.4.13
BUG:
bluetooth
Vibration weak
USB always shown
headset
No European Languages except English
wipe data/factory reset - wipe cache ，wipe dalvik cache
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link:
http://115.com/file/dpn3ybam#MIUI2.3-TEST-2.zip
Hi, wuhaoyu1990.
Thanks for your work.
APN does not work for me. Could you tell please, what's may be wrong.
What recovery you are using?
I'm downloading !
Could you make a port of MIUI V.4 based on Cyanogen Mod 9 by Arco ?!
Alex93917 said:
I'm downloading !
Could you make a port of MIUI V.4 based on Cyanogen Mod 9 by Arco ?!
Click to expand...
Click to collapse
At top say....based CM7.....
CM9 is still on really beta or alpha state....
And is a i9000 port...thats why it can´t be based on CM9 by Arco...
Maybe on a NexusS->i9000->i9001....but....
Really thanks!!!
Please dont stop with this port!!
i´ll really apreciate it
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
sn0vvman said:
Hi, wuhaoyu1990.
Thanks for your work.
APN does not work for me. Could you tell please, what's may be wrong.
What recovery you are using?
Click to expand...
Click to collapse
You can backup your APN data with apn backup & restore
And then restore it
Okay !
I stay on CM9, but I keep to follow the development MIUI 2.4 or superior (4.0 for exemple).
Thanks very much for your hard work ! I will test in 10 minutes. I go to upload the .zip on Mediafire, because the Chinese Link is too slow
Alex93917 said:
Okay !
I stay on CM9, but I keep to follow the development MIUI 2.4 or superior (4.0 for exemple).
Thanks very much for your hard work ! I will test in 10 minutes. I go to upload the .zip on Mediafire, because the Chinese Link is too slow
Click to expand...
Click to collapse
4.0?
You mean 2.4 MIUIv4 based,right?
For it (2.4 miuiv4 based) the best is try to port for example asnet miui v4 ics(4.0.4) based.
But is easier to port a GB i think, or maybe to learn how, first begin with a GB (driver and modules compatibility)
Yes, I don't know really MIUI It's 2.4 then !
Bug and report :
--> No European Languages except English.
--> 3G, or APN don't work.
--> Keyboard is very little.
--> Translate partial of system, The notifications are in Chinese, but the system is in English.
--> Feedback is very weak.
--> Bluetooth don't work.
Good luck !
You created this yourself?
That's a damn good job.
Just improve the translation and it may be an usable version.
I have made it but it has lots of bugs~
Amazing work man. Keep it going.
abt bugs
All those bugs you mention earlier are the same from CM7 build. So untill those aren`t fixed there isn`t much to do abt them sadly
Download link with Mediafire : http://www.mediafire.com/?tlj8eav3au5dkw8
Good work wuhaoyu1990, please keep it up!
Will you also be releasing your MIUI v4 build that you announced here? CM9, despite not having a working camera, is actually more stable and suitable for everyday use. It has working APN, vibration has been fixed, the constant USB debugging notification isn't there etc.
Vibration in CM9 was fixed like this, my guess is it can be backported to CM7.
Thank you for bringing MIUI to the i9001!
dbx4 said:
Good work wuhaoyu1990, please keep it up!
Will you also be releasing your MIUI v4 build that you announced here? CM9, despite not having a working camera, is actually more stable and suitable for everyday use. It has working APN, vibration has been fixed, the constant USB debugging notification isn't there etc.
Vibration in CM9 was fixed like this, my guess is it can be backported to CM7.
Thank you for bringing MIUI to the i9001!
Click to expand...
Click to collapse
i fixed Vibration in cm7
but i can't post anything
mazen912 said:
i fixed Vibration in cm7
but i can't post anything
Click to expand...
Click to collapse
Why not?
Sent from my GT-I9001 using XDA Premium HD app
projeto56 said:
Why not?
Sent from my GT-I9001 using XDA Premium HD app
Click to expand...
Click to collapse
Because he was acused of fraud. He worked over skywalker sources and posted a cm7 build and someone reported him of stealling skywalker's work...
Sent from my GT-I9001
chasemyass said:
Because he was acused of fraud. He worked over skywalker sources and posted a cm7 build and someone reported him of stealling skywalker's work...
Click to expand...
Click to collapse
That does not make any sense to me. The whole point of open source is to collaborate and work on each other's source code. The only condition is to leave credit where credit is due, which mazen912 did.
Cyanogenmod and AOSP are open sourced under a mix of Apache License and GPL. skywalker01 publishes his sources at github. Since he has not stated otherwise, his code automatically inherits the Apache Software License (ASL) 2.0. ASL allows the modification and redestribution of software in both source and binary form.
In summary, the spirit of open source is collaboration while crediting each and every contributor to the code. There is no reason why development should stop just because skywalker01 is on holiday.
dbx4 said:
That does not make any sense to me. The whole point of open source is to collaborate and work on each other's source code. The only condition is to leave credit where credit is due, which mazen912 did.
Cyanogenmod and AOSP are open sourced under a mix of Apache License and GPL. skywalker01 publishes his sources at github. Since he has not stated otherwise, his code automatically inherits the Apache Software License (ASL) 2.0. ASL allows the modification and redestribution of software in both source and binary form.
In summary, the spirit of open source is collaboration while crediting each and every contributor to the code. There is no reason why development should stop just because skywalker01 is on holiday.
Click to expand...
Click to collapse
it seems that some ppl don`t understand the meaning of AOSP and all the collaboration thingy ... I`ve tested CM7 and (dunno the skywalker`s work since he didn`t posted anything yet) mazen`s work was pretty awesome, CM7 was more functional than CM9 we have (the main reason is functionaly camera, even if the pictures aren`t full quality-that`s not a big thing to fix I think) and the BT...So before ppl should start report like crazy they should read a bit abt things...but we all know that`s not happening here on XDA sadly ;( nor other forums as far I can see ... ignorance is one of the ****tyest thing a human can have...Sorry if I upset someone but because of ignorance and stupid questions we lost alrdy a good developer for our gt-9001 (we all know why yarde left) and it`s sad that we can`t really stop this...Thank you maze for keeping up the good work and don`t stop mate, you are doing a hell of a job (in theese moments I wish I know some codding to give you guys a hand).
update for bluetooth and anything?
Not booting for me. hangs at miui logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seeing everyone has demanded it (well not demanded, but asked politely), it's time for me to bring my legendary kernel to the Galaxy SL.
Features
Busybox
ADB root
LZMA compressed
Credits
dhiru1602 for his work to date with the Latona
Source Code
https://github.com/hillbeast/Kyorakernel-SL
Changelog
Coming soon
Download Links
Coming soon
Guides
Coming soon
Full Feature List
Coming soon
This mean u are going to backport some 3.0 features or u are just going to compile a normal 2.6 kernel for i9003?
OT: Again and again: thanks hillbeast in the name of almost every xda-developers
simbita said:
Works it with CM9?
Click to expand...
Click to collapse
Not yet. I'm just getting it to work before I start supporting CM9 and all that.
Wucaiting said:
sorry
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I'm really a terrible teacher. If people want to learn kernel development, I'm not the best teacher. I lack the effort, can't explain stuff right, and I'm too busy in my personal life to dedicate myself to teaching people. Sorry.
luiseteyo said:
This mean u are going to backport some 3.0 features or u are just going to compile a normal 2.6 kernel for i9003?
OT: Again and again: thanks hillbeast in the name of almost every xda-developers
Click to expand...
Click to collapse
Both. It's going to be a normal 2.6 kernel, but it's going to get tuned up over time. It's usable for people right now, but I'd call this a stock kernel in it's current state.
If anyone wants to know what I'm working on, I'm working on MTD for this kernel.
This is the current status:
Code:
[ 4.945831] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
[ 4.950927] OneNAND version = 0x0242
[ 4.955993] Scanning device for bad blocks
[ 4.960266] onenand_bbt_read_oob: from = 0x00000000, len = 2
[ 4.966247] onenand_bbt_wait: read timeout! ctrl=0x0400 intr=0x8000
[ 4.972808] onenand_scan_bbt: Can't scan flash and build the RAM-based BBT
[ 4.980255] OneNAND driver initializing
That's it trying to start the OneNAND, and I'm pretty sure that's right. It is a 512MB OneNAND and I haven't had to tell it that so it figured it out by itself. I just need to figure out why it's not able to read it. Apart from that, this is good progress considering I only just started.
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
bscraze said:
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
The WiFi issues are caused by modmagic. The WiFi drivers are supplied in /system/lib and are paired to a kernel. It would be a matter of taking a paired dhd.ko and putting it in the kernel itself rather than in the /system.
bscraze said:
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Ya all the kernel in present situation are based on xxkpq sources having universal feature. But on value packs like XXLF2, DDLF2 etc these universal kernel dont work properly & have errors like above said.
reserved. after this hoping for kyorarom if possible.
hillbeast said:
The WiFi issues are caused by modmagic. The WiFi drivers are supplied in /system/lib and are paired to a kernel. It would be a matter of taking a paired dhd.ko and putting it in the kernel itself rather than in the /system.
Click to expand...
Click to collapse
speaking of wifi issues, may/can you make it work on posidon rom? because other GB kernels seems to have alot of issues with wifi and other stuff.... (xxkpq)
Wahaha123 said:
speaking of wifi issues, may/can you make it work on posidon rom? because other GB kernels seems to have alot of issues with wifi and other stuff.... (xxkpq)
Click to expand...
Click to collapse
I can try. I want to get MTD working first. I think I just have an address wrong somewhere. I need to find where these are set for OMAP. I know where they are in Samsung Hummingbird/S5P/Exynos, but not OMAP.
ggclanlord said:
Subscribed.
Click to expand...
Click to collapse
u didnt hav to say that lol
@hillbeast- thanks for ur contribution here are a little of my experiences with this phone.. oc more than 1.2 ghz causes problems for camera n video recording and its not advisable .. even underclocking leads to sod at times although not always(based on uk kernels) ... and since u specialize in kernels.. c if u can get gpu oc to work.. most said it isnt possible n it wasnt working ... all the best sir m not demanding anything
cukierkas said:
Willing the best!
By what points your kernel will be better than current ones? Just asking
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
For that you'll have to wait and watch.
There were requests from senior members in other thread for features that weren't available on current kernels. I guess that's what prompted Hillbeast to create this kernel for this device. Also, I guess in developing this kernel, he might find out what exactly is going wrong with 3.x and we might get both working.
o0Arthas0o said:
I just have a piece of advice.How about include exFAT support in your kernel.It can improve the speed of SDCARD
Click to expand...
Click to collapse
I can try, but the problem there is the same as adding NTFS support to the SD card. I did it in G3MOD and it worked, but Android itself couldn't read the SD card because vold didn't know how to handle it.
BassBlaster said:
I don't think mtd supports exfat
Click to expand...
Click to collapse
MTD is for the OneNAND. The memory card uses standard Linux MMC drivers.
Thread cleaned extensively, let's keep on topic please, and avoid the little, "thanks", "subscribed", and eta posts.
Thanks
hi
how to flash it? and where is the tar file? i need stock kernel please. my menu and back button sensor not working.. TIA
Before Hillbeast and others got mad at you please try cf-root heres the link http://forum.xda-developers.com/showthread.php?t=1351056 download bagaria.tar. Questions should not be posted in dev. area.
francisac3 said:
how to flash it? and where is the tar file? i need stock kernel please. my menu and back button sensor not working.. TIA
Click to expand...
Click to collapse
Download Ubuntu 64-bit and install it on your computer
Download the build tools and git-core
Clone my GIT repository linked on the first page
Compile the kernel
Flash the output TAR
There is no download link. I don't see the kernel as being ready to be released to public.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I guess every one know PACman, it's CM+AOKP+PA. So same bugs, same features. I didn't added, removed, or modified, anything - just put the p720 device tree into the source (synced against latest repos) and built it. So all credits goes to the awesome CyanogenMod Team, and of course the folks from ParanoidAndroid and PACman.
And many thanks to the whole community, without XDA and the awesome tutorials this wouldn't be possible.
How to flash: Same like CM10. If I need to tell you this, you better don't flash
Not working: 3D Features of course
No Gapps included! Flash the usual jellybean pack, like found here –> Goo.im
Remark: Don't be to harsh, this is my first rom
Source: In case anyone want it, all "my" sources are on Github.
Kernel: https://github.com/mcdope/lge-kernel-omap4/tree/3.0-workingmerge#readme (Make sure you use the "3.0-workingmerge" branch, master compiles fine but wouldn't boot)
android_vendor_pac: https://github.com/mcdope/android_vendor_pac
r2 - First update!
Added (or better said removed from packaging removal) ParanoidPreferences
Added ParanoidWallpapers
Added LG ICS Bootanimation (sourced from androidbootanimation.com)
Newest jellybean sources from all upstream repos
Download Update #1 / r2 -> [obsolete]
r3 - Second update!
Removed Superuser + SuperSU, added koush's variant instead
Updated kernel from 3.0.21 to 3.0.39! Performance, and hopefully battery, improvements
Antutu Score: ~450 points increase
Quadrant Score: ~300 points increase
Note: benchmarks got done @ 1200 Mhz and performance scheduler, but kernel defaults to 1000Mhz and interactive! You can adjust this in the usual places...
Again synced with latest upstream sources, but no real changes there...
Download Update #2 / r3 -> p720_PAC_JB_4.1.2-v19.3.0_r3-final.zip - 140.54 MB
NOTE: I've stopped all work on this ROM, since I got annoyed from not getting CM10.1 to boot and the loosy battery performance of the 3D Max. So my 3D Max went to the pocket of my wife and I switched to a more developer friendly device - Xperia Z. I'll still answer questions here (no PMs please - esp. if you disabled recieving them ), but no updates anymore for sure. There wouldn't be real changes anyway...
ANOTHER NOTE, THREE YEARS LATER: This ROM is still dead - nothing changed from the infos in this thread. There is NO need to ask me questions about it by PM. Which, on another note, sucks anyway - questions belong in the thread! Even if I wanted to answer them, I couldn't - see, it's ridiculous there is even a need to tell so, I haven't used it for 3 years now... Also I recommend to stay away from this device as far as you can - it just sucks.
Thanks for the rom. Gotta love the PAC. Which CM10 built did you use?
RoxRedEye said:
Thanks for the rom. Gotta love the PAC. Which CM10 built did you use?
Click to expand...
Click to collapse
Its compiled from latest jellybean branch, so its CM10.
There is currently no CM10.1 device tree for our p720, but i will try to get a working 10.1 compile, but that wont be as easy as this so dont expect much. Like written, im totally new to Android builds xD
Re: [ROM][P720][JB] PAC-man for Optimus 3D Max [AOKP]+[PARANOID]+[CM10]
i am gonna try it and report you as soon as possible
Sent from my LG-P725 using xda app-developers app
Re: [ROM][P720][JB] PAC-man for Optimus 3D Max [AOKP]+[PARANOID]+[CM10]
McDope said:
I guess every one know PACman, it's CM+AOKP+PA. So same bugs, same features. I didn't added, removed, or modified, anything - just put the p720 device tree into the source (synced against latest repos) and built it. So all credits goes to the awesome CyanogenMod Team, and of course the folks from ParanoidAndroid and PACman.
And many thanks to the whole community, without XDA and the awesome tutorials this wouldn't be possible.
How to flash: Same like CM10. If I need to tell you this, you better don't flash
Not working: 3D Features of course
No Gapps included! Flash the usual jellybean pack, like found here –> Goo.im
Remark: Don't be to harsh, this is my first rom
Source: In case anyone want it, all "my" sources are on Github.
Still reading? Wanna download? Then here we go -> p720_PAC_JB_4.1.2-v19.3.0.zip - 132.43 MB
Click to expand...
Click to collapse
Screenshots
Sent from my LG-P725 using xda premium
Re: [ROM][P720][JB] PAC-man for Optimus 3D Max [AOKP]+[PARANOID]+[CM10]
Hi thanks for great work I don't know why in the stock GB the amount of ram is about 950 but in the cm it's about 750
Sent from my LG-P725 using Tapatalk 2
boly007 said:
Hi thanks for great work I don't know why in the stock GB the amount of ram is about 950 but in the cm it's about 750
Sent from my LG-P725 using Tapatalk 2
Click to expand...
Click to collapse
I don't know why to be honest. But as far as i know (which isn't very far in this case ) Android (or the kernel) reserves some for himself which is subtracted from the shown RAM
;37461844 said:
do 3d camera work?
Click to expand...
Click to collapse
McDope said:
(...)Not working: 3D Features of course (...)
Click to expand...
Click to collapse
Like stated in the OP, no. If we could get an official ICS or JB release maybe, but currently and in the next time: no.
3d features , kernel?
out date_?
madmann said:
3d features , kernel?
out date_?
Click to expand...
Click to collapse
I'm sorry but could you please give me some more input?
If you're asking if 3D is working, see OP - or the post right in front of yours . About kernel: it's based on the CM10 omap4-common kernel, but patched. For details about the changes see my Github log. What do you mean with out date?
Thanks for your ROM, I was thinking about cutomizing it.
Any problems with it ?
IF no, any clues or tips ?
iddpioneer said:
Thanks for your ROM, I was thinking about cutomizing it.
Any problems with it ?
IF no, any clues or tips ?
Click to expand...
Click to collapse
Even if I had problems with it, the cool thing about GPL code is that it wouldn't matter But no, i've got no problem with it - go ahead and pimp the hell out of it.
But be careful if you use "my" kernel, and/or device tree. The github for both has a bunch of commits that never went into this rom. This is because of many tries to get CM10.1 based code booting (getting it to compile was easy, but hangs on bootscreen forever - i gave up on it). If you wanna fiddle with it, and get problems, i'll try to help you. But i don't have the Max anymore for testing...
I've got annoyed from not getting CM10.1 to work and the absolutly crappy battery life. So i would be perfectly fine if you "overtake" it. (Got myself a yuga / Xperia Z and dumped the LG to my wife - thanks to a tax payback )
McDope said:
Even if I had problems with it, the cool thing about GPL code is that it wouldn't matter But no, i've got no problem with it - go ahead and pimp the hell out of it.
But be careful if you use "my" kernel, and/or device tree. The github for both has a bunch of commits that never went into this rom. This is because of many tries to get CM10.1 based code booting (getting it to compile was easy, but hangs on bootscreen forever - i gave up on it). If you wanna fiddle with it, and get problems, i'll try to help you. But i don't have the Max anymore for testing...
I've got annoyed from not getting CM10.1 to work and the absolutly crappy battery life. So i would be perfectly fine if you "overtake" it. (Got myself a yuga / Xperia Z and dumped the LG to my wife - thanks to a tax payback )
Click to expand...
Click to collapse
Thanks for your fast answer man!
Just one tip I promise that I don´t bother you anymore.
By now I was messing with copying files from one rom to another, some configurations, but I couldn´t understand for example why some apps don´t run in JellyBean ? Like the 3D ones and a non-3D like Polaris Office and Radio FM, its because of the framework or the lib ? or both ?
call echo problem ?
Hi
after years...
I've searched the whole internet for a mirror of this rom but no luck
anyone can upload it for me?
I want it for my father WhatsApp doesn't work on a4 anymore