Is there anywhere to go see the status or problems finalizing cm9 for the shift? I know there are a lot of phones/tablets that are already getting nightlies. I'm not asking an eta. I know it will come when it comes. Just wondering if there is a place to view the progress from the official cm team.
I've googled several different ways.
Sent from my PG06100 using xda premium
I'm not sure the shift will see official cm9, the ONLY reason it seen cm7 was because of toast
Sent from my myTouch_4G_Slide using Tapatalk 2
were waiting for a kernel for ics that is the main thing hold us back from 4g hardware accelleration etc.. someone correct me if i am wrong
Bfitz26 said:
were waiting for a kernel for ics that is the main thing hold us back from 4g hardware accelleration etc.. someone correct me if i am wrong
Click to expand...
Click to collapse
Well if you look Zen has a cm9 posted, so the aosp ICS kernel is there, It's more so waiting on HTC to release ICS Sense Source to a similar device so the kernel can be ported, but then you also have to look at will any ICS Sense builds have WiMax? Most likely if the kernel is ported from Kingdom but It's all up in the air right now while everyone scatters to get ICS LOL that's just my opinion though
Sent from my myTouch_4G_Slide using Tapatalk 2
yeah i meant kernel source to be ported i do relize we do have a kernel but yeah from what i understand once the design or the g2 gets it will give us more hope and once we do have a more official build i plan on porting aokp
Bfitz26 said:
yeah i meant kernel source to be ported i do relize we do have a kernel but yeah from what i understand once the design or the g2 gets it will give us more hope and once we do have a more official build i plan on porting aokp
Click to expand...
Click to collapse
Not sure if WiMax would work in a gsm kernel, but I'm no kernel dev
Sent from my myTouch_4G_Slide using Tapatalk 2
Waiting for Zenulator to post his source so other devs can work on it.
In regards to wimax, Is that a kernel issue in that each phone has to have that added in seperately, or would it be an easy port once people figure out how to get it working on phones like the 3d? I remember reading on twitter that toast was working on getting wimax onto cm9... so i was wondering if that would translate to us eventually getting it as well
strapped365 said:
I'm not sure the shift will see official cm9, the ONLY reason it seen cm7 was because of toast
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
Good thing toast is still active with the shift. :-D
Shifted from Outer Space
4G is built into the kernel. 4G won't be the tough thing, getting a kernel functioning properly is the tough part... I've been working on it here and there but a new job, baseball, softball, wife and kids have been keeping me fairly occupied... I keep up with the good kernel devs on twitter...
Strapped, the kernel I ported from the g2 has wimax, it just has to be written into the source or enabled in menuconfig....
Sent from my PG06100
drob311 said:
4G is built into the kernel. 4G won't be the tough thing, getting a kernel functioning properly is the tough part... I've been working on it here and there but a new job, baseball, softball, wife and kids have been keeping me fairly occupied... I keep up with the good kernel devs on twitter...
Strapped, the kernel I ported from the g2 has wimax, it just has to be written into the source or enabled in menuconfig....
Sent from my PG06100
Click to expand...
Click to collapse
NICE, been a while since i seen you post, i figured work had gotten you busy with the season and all, btw i finally oc the doubleshot to 1.9 lol 2Ghz wouldnt even boot.
Sent from my myTouch_4G_Slide using Tapatalk 2
Related
Word on the street there's a HUGE project going on! I haven't heard the details but it will be the best out of all of the SK ROMS we have!
Brundonm said:
Word on the street there's a HUGE project going on! I haven't heard the details but it will be the best out of all of the SK ROMS we have!
Click to expand...
Click to collapse
whos in charge of the project?
Brundonm said:
Word on the street there's a HUGE project going on! I haven't heard the details but it will be the best out of all of the SK ROMS we have!
Click to expand...
Click to collapse
You canadians get excited over anything
xmeatizmurderx said:
You canadians get excited over anything
Click to expand...
Click to collapse
is this a team rev project?
tylermaciaszek said:
is this a team rev project?
Click to expand...
Click to collapse
We have a lot of projects going on, I dunno if he is talking about one of ours or one of ayoteddy's or maybe even something I haven't seen yet, I know sduvick was working on gingerbread but I thought he might have given up. Either way, it's best to not get excited over speculation
xmeatizmurderx said:
We have a lot of projects going on, I dunno if he is talking about one of ours or one of ayoteddy's or maybe even something I haven't seen yet, I know sduvick was working on gingerbread but I thought he might have given up. Either way, it's best to not get excited over speculation
Click to expand...
Click to collapse
i was told of a ported OC kernel by revolution
Revolution is waiting on a couple different devs to respond back about an OC kernel, I'm working on compiling AOSP 2.2, Ayo is testing out his MIUI styled rom, there's your news.
Now that's a reliable source I can bank on.
sduvick said:
Revolution is waiting on a couple different devs to respond back about an OC kernel, I'm working on compiling AOSP 2.2, Ayo is testing out his MIUI styled rom, there's your news.
Click to expand...
Click to collapse
sduvick said:
Revolution is waiting on a couple different devs to respond back about an OC kernel, I'm working on compiling AOSP 2.2, Ayo is testing out his MIUI styled rom, there's your news.
Click to expand...
Click to collapse
Then maybe one day we can see all of them together with an AOSP MIUI Rom w/ a OC Kernel.. maybe lol
Sent from my SGH-T839 using XDA App
To be honest all I've been hereing is th OC kernal and that a really big project going on by some big dev idk who it is yet tho
Sent from my SGH-T839 using XDA Premium App
there's 3 possible devs for the oc kernel, noone has officially accepted it yet.
xmeatizmurderx said:
You canadians get excited over anything
Click to expand...
Click to collapse
One no we don't, two why bag on canadians, three ur name sounds like ur a veggitarian
Sent from my SGH-T839 using XDA Premium App
P.S. Mr. super excited about an OC kernel, I made one, and I wasn't any of the 3 devs Revolution was waiting on, even if it's not a fully stable kernel
I was creeping the cyanogenmod google+ page and they mentioned having at least two t989 phones. At least this gives some hope of them picking up our device.
R4INS said:
I was creeping the cyanogenmod google+ page and they mentioned having at least two t989 phones. At least this gives some hope of them picking up our device.
Click to expand...
Click to collapse
I had a chat with one of the devs on Saturday and he confirmed they're working on it, but don't have any eta.
Sent from my SAMSUNG-SGH-I727 using XDA App
more hope, more waiting
Really?! This is awesome! I'm currently running cm9 on an aria I picked up. Its slowish because of the hardware but for an early alpha its really smooth and haven't had any issues with it at all
Sent from my SAMSUNG-SGH-I727 using XDA App
markber said:
I had a chat with one of the devs on Saturday and he confirmed they're working on it, but don't have any eta.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Working on skyrocket specific or t989 that can be ported
mbucks911 said:
Working on skyrocket specific or t989 that can be ported
Click to expand...
Click to collapse
It could be ported for sure, there's a few dual phones on their site such as the htc inspire and htc desire. I'm just happy that they PLAN on the t989. They seem pretty hush hush. If you could get some more information from your Dev friend that would be awesome. I'm not digging for an eta or status update, just would like a skyrocket confirmation etc.
t3chfr3ak07 said:
Really?! This is awesome! I'm currently running cm9 on an aria I picked up. Its slowish because of the hardware but for an early alpha its really smooth and haven't had any issues with it at all
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Lol yeah, CM9 for Aria is amazingly stable as well. I'm hoping to sell it and buy an Atrix instead for a backup phone, though...
But back on topic. Is this CM9 or CM7 they're working on? I wouldn't mind CM7... it would make the MIUI porting process hundreds of times easier... CM9 would be nice too though.
iandr0idos said:
Lol yeah, CM9 for Aria is amazingly stable as well. I'm hoping to sell it and buy an Atrix instead for a backup phone, though...
But back on topic. Is this CM9 or CM7 they're working on? I wouldn't mind CM7... it would make the MIUI porting process hundreds of times easier... CM9 would be nice too though.
Click to expand...
Click to collapse
Cm9, they mentioned having 3.0 kernel issues.
Is it possible to get sense 4.0?
Not yet, but be paticent .
We need a compatable kernel source...
Sent from my PG06100
What I read was sense 4.0 only goes to phones that are made for ics and the phones that get updated from gingerbread to ics get sense 3.6 which is pretty much the same but that has to do with hardware issues
Sent from my PG06100 using Tapatalk
Yea YoungCorruption is right, the EVO 3D, Sensation etc are all getting Sense 3.6 with "as many Sense 4.0 features we can include" says HTC.
New phones will get Sense 4.0, and this is mostly because of the ImageSense chip in the new HTC phones which current phones do not have.
Honestly I will be suprised to see the shift get sense 3.6, but no matter what eventually their will be ports of Sense 4.0, Sense 3.6 etc. Hell the One V Leak just showed itself ill probably post on general later
Kinda weird that no one has started the porting. I know there isn't a compatible kernel source out there yet. I'll be looking out for one, if I come across one I'll let you know! Thank you for helping our Shifts get sense 4.0!
megaghostgamer said:
Kinda weird that no one has started the porting. I know there isn't a compatible kernel source out there yet. I'll be looking out for one, if I come across one I'll let you know! Thank you for helping our Shifts get sense 4.0!
Click to expand...
Click to collapse
Not that weird. It's considerably more difficult, if not impossible to port a Rom without a Kernel.
I'm trying to port. Crossing fingers. Lol. Hopefully I can get it. I've tried many different sense roms but maybe this might be the one lol. I hope I can get it up and working for everyone
megaghostgamer said:
I'm trying to port. Crossing fingers. Lol. Hopefully I can get it. I've tried many different sense roms but maybe this might be the one lol. I hope I can get it up and working for everyone
Click to expand...
Click to collapse
Your not going to be able to port it without a kernel
Sent from my myTouch_4G_Slide using Tapatalk 2
Like i said on a previus post try to get a kernal from a similar phone and there are some out there i searched
Sent from my PG06100 using xda premium
dayday1234 said:
Like i said on a previus post try to get a kernal from a similar phone and there are some out there i searched
Sent from my PG06100 using xda premium
Click to expand...
Click to collapse
Well then I'm sure you also know how to compile a kernel? I mean if its as easy as your saying you could do this in your sleep no? If you can compile it then do so, that way development goes farther otherwise what you saying don't really mean anything
Sent from my myTouch_4G_Slide using Tapatalk 2
I dont have time to do anything at the moment this is my last year in school and i have test to study for untill then
But i did look in to how to port kernals its no easy task
Sent from my PG06100 using xda premium
strapped365 said:
Well then I'm sure you also know how to compile a kernel? I mean if its as easy as your saying you could do this in your sleep no? If you can compile it then do so, that way development goes farther otherwise what you saying don't really mean anything
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
U didnt understand what im trying to say.
Sent from my PG06100 using xda premium
I was wondering if anybody is working on sense 4 for this phone and if anyone is make a port for us.
Sent from my PG06100 using XDA
I believe some devs are but with no kernel source from the desire z or g2 its gonna be a while
Sent from my PG06100 using Tapatalk 2
But there's a fully bootable Sense 4 build for the Desire Z and G2, couldn't they just use needed elements of the Kernel source that's booting those builds?
TDJ512 said:
But there's a fully bootable Sense 4 build for the Desire Z and G2, couldn't they just use needed elements of the Kernel source that's booting those builds?
Click to expand...
Click to collapse
We could but I personally don't have the time or the skill to write a whole new kernel source... As for the booting versions for the desire hd and g2, I believe the kernel is a 2.6.35.14 version, hacked to work with ics...
Sent from my PG06100
That's probably along the lines of whats gonna be required. I don't see HTC releasing a compatible Kernel for a device they've already determined EOL on.
TDJ512 said:
That's probably along the lines of whats gonna be required. I don't see HTC releasing a compatible Kernel for a device they've already determined EOL on.
Click to expand...
Click to collapse
The design and desire hd are both getting ics... The design has the exact same processor as shift. Once that source is released, it will definitely make things less challenging... I can add a device to a source, just happens to be extremely time consuming because it's somewhere around 5000 edits. I'll have a million errors to fix, which is even more time consuming... But the good news is that I started working on it (adding shift to 2.6.35.14 kernel modded for ics) a month or so ago, the bad news is that it still needs endless hours of work... I can't honestly say if I'll ever get it, but, i.m.o., it's definitely worth a shot... :beer:
Sent from my PG06100
drob311 said:
The design and desire hd are both getting ics... The design has the exact same processor as shift. Once that source is released, it will definitely make things less challenging... I can add a device to a source, just happens to be extremely time consuming because it's somewhere around 5000 edits. I'll have a million errors to fix, which is even more time consuming... But the good news is that I started working on it (adding shift to 2.6.35.14 kernel modded for ics) a month or so ago, the bad news is that it still needs endless hours of work... I can't honestly say if I'll ever get it, but, i.m.o., it's definitely worth a shot... :beer:
Sent from my PG06100
Click to expand...
Click to collapse
Had someone in the doubleshot forums say them devices are only getting sense 3.5 ICS? And that sense 4 was reserved for the one series because of their camera chip or something. Hell I don't know I don't keep current with what's being released I just keep my current phone faster and better than what's being released
Sent from my myTouch_4G_Slide using Tapatalk 2
All HTC devices that are getting ICS excluding the one series are getting sense 3.6 which is basically sense 3.5 on ICS but with a few new things like the Rosie has 5 icons and u can change 4 of em and whatever apps are on the dock are your lockscreen shortcuts. Nothing major that I've noticed. Running it on my evo3d now. The design has an ICS leak already I can link to it if you guys want.
And don't you guys already have a hacked 2.6.35.14 kernel for ICS? On the evo3d we can boot up CM9 with the 3.0 kernel from the leak we got and before we got the 3.0 kernel we were booting up sense 4.0 with the tiamat kernel
AND you guys have working ICS roms to base it off as a start.
Sent from my PG86100 using xda premium
pwnyourace said:
All HTC devices that are getting ICS excluding the one series are getting sense 3.6 which is basically sense 3.5 on ICS but with a few new things like the Rosie has 5 icons and u can change 4 of em and whatever apps are on the dock are your lockscreen shortcuts. Nothing major that I've noticed. Running it on my evo3d now. The design has an ICS leak already I can link to it if you guys want.
And don't you guys already have a hacked 2.6.35.14 kernel for ICS? On the evo3d we can boot up CM9 with the 3.0 kernel from the leak we got and before we got the 3.0 kernel we were booting up sense 4.0 with the tiamat kernel
AND you guys have working ICS roms to base it off as a start.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Doesn't work, myself and a few other devs have tried to use tiamat and it won't boot... No we don't have the hacked 2.6.35.14 kernel, I'm working on porting it but I'm getting an error about the eng hboot... The design stuff won't work until we can resize it, shift is 3.6" wvga resolution and design is 4" qhd resolution. We have already thought about and or tried all the recommendations here... It isn't going to be as easy as you think... As for sense 4.0, we should get the ROM, but it will prolly never have a fully functioning camera. Strapped is right, the one series has a new imaging chip, that's not compatable with shift...
Sent from my PG06100
drob311 said:
Doesn't work, myself and a few other devs have tried to use tiamat and it won't boot... No we don't have the hacked 2.6.35.14 kernel, I'm working on porting it but I'm getting an error about the eng hboot... The design stuff won't work until we can resize it, shift is 3.6" wvga resolution and design is 4" qhd resolution. We have already thought about and or tried all the recommendations here... It isn't going to be as easy as you think... As for sense 4.0, we should get the ROM, but it will prolly never have a fully functioning camera. Strapped is right, the one series has a new imaging chip, that's not compatable with shift...
Sent from my PG06100
Click to expand...
Click to collapse
Well the best thing we can do is wait and hope our devs can make a great Rom
Sent from my PG06100 using XDA
B RAD G 296 said:
Well the best thing we can do is wait and hope our devs can make a great Rom
Sent from my PG06100 using XDA
Click to expand...
Click to collapse
Our devs have already made great ROMs.
Kudos to those who've kept us busy with all the new things to flash.
ICS+Sense 4.0+4G would just be icing on the cake.
Sonkway said:
Our devs have already made great ROMs.
Kudos to those who've kept us busy with all the new things to flash.
ICS+Sense 4.0+4G would just be icing on the cake.
Click to expand...
Click to collapse
I was talking about sense 4 time or 3.6
Sent from my PG06100 using XDA
Tiamat kernel is a hacked 2.6.35.14 kernel for ICS or else it wouldn't boot CM9. Not saying its got everything it needs to boot sense 3.6 but the base is there. Chad.Goodman over at infectedrom.com (goes by kernelchef now) might be able to help with getting the kernel changes to boot sense 3.6 because he's done it on our 3D's. As for the camera chip on sense 4.0 you mentioned, the 3D doesn't have the chip and we have our camera working. Joelz was working on a sense 3.6 port before we got our leak so he could probably share some knowledge about it. I think he was the one that got the camera going on sense 4.0 also (Some refer to him as the porting god). And newtoroot has fixed like everything on his sense 4.0 ports. And as for the resizing, its been done for the shift there's kingdom ports for sense 3.0. Yea, I know this ain't easy and I'm not trying to make it seem like it is, but its been done. And I'd try and get something cooking but I don't have my shift anymore.
Sent from my PG86100 using xda premium
pwnyourace said:
Tiamat kernel is a hacked 2.6.35.14 kernel for ICS or else it wouldn't boot CM9. Not saying its got everything it needs to boot sense 3.6 but the base is there. Chad.Goodman over at infectedrom.com (goes by kernelchef now) might be able to help with getting the kernel changes to boot sense 3.6 because he's done it on our 3D's. As for the camera chip on sense 4.0 you mentioned, the 3D doesn't have the chip and we have our camera working. Joelz was working on a sense 3.6 port before we got our leak so he could probably share some knowledge about it. I think he was the one that got the camera going on sense 4.0 also (Some refer to him as the porting god). And newtoroot has fixed like everything on his sense 4.0 ports. And as for the resizing, its been done for the shift there's kingdom ports for sense 3.0. Yea, I know this ain't easy and I'm not trying to make it seem like it is, but its been done. And I'd try and get something cooking but I don't have my shift anymore.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Pretty tough to talk to those devs' when they don't return messages... We'll figure it out... One way or another...
Sent from my PG06100
drob311 said:
Pretty tough to talk to those devs' when they don't return messages... We'll figure it out... One way or another...
Sent from my PG06100
Click to expand...
Click to collapse
Chad might be a toughie but joelz is usually good about replying to PMs and he's also got a twitter. If you can't get a hold of newtoroot on here try over at themikmik
I'm just trying to help with people to talk to since I've watched the development well..develop on the 3D. I'm an ungrateful flasher when it comes to sense roms I tear anything HTC related right out and replace it with AOSP apps. Its really cool on ICS you can even replace things like the systemui with AOSP so u get the status bar and drop down and everything
Sent from my PG86100 using xda premium
I really like the Evo Shift. The fact that its probably gonna be the last Sense device for the foreseeable future that has a hardware QWERTY, Its gonna be real hard to move on from it because every Android phone I've ever owned has had 1. I'm not a fan at all of phones that don't have 1. However, not having Sense 4 really sucks considering this phone isn't really all that old. HTC/Sprint should have brought us to Sense 4. The Evo was out what A year before the Shift give or take? Its total BS the EOL is confirmed along side it.
It's really hard to port this rom because of how large sense 4.0 rom is. Over 500mb. I've tried and failed with a non boot start. Lol, I'll keep trying Hopefully I can get the rom working and everyone can enjoy!
megaghostgamer said:
It's really hard to port this rom because of how large sense 4.0 rom is. Over 500mb. I've tried and failed with a non boot start. Lol, I'll keep trying Hopefully I can get the rom working and everyone can enjoy!
Click to expand...
Click to collapse
You don't have a kernel to boot Sense 4 with so I would just stop
Sent from my myTouch_4G_Slide using Tapatalk 2
still no correct kernel out there? I tried porting the evo 4G one to us, then I tried the evo 3D
megaghostgamer said:
still no correct kernel out there? I tried porting the evo 4G one to us, then I tried the evo 3D
Click to expand...
Click to collapse
I imagine it is pretty hard to port a kernel. Going to try some research later and see about it....:thumbdown:
Sent from my myTouch_4G_Slide using Tapatalk 2
I'm going to try my hand at porting a few new kernels for us. Might be a week or two, but any specific requests for a kernel? GB for now. ICS/JB maybe later
Shifted from the bottom of the rabbit hole
Remember, I am new to this. which is why i am asking yall, to make it easier my first few times
thronnos said:
Remember, I am new to this. which is why i am asking yall, to make it easier my first few times
Click to expand...
Click to collapse
I would suggest hitting up strapped365 for help and stuff
I dont know much about kernels but here is one I've used on my evo 4g that works well. I dont know how it would work on the shift though. http://forum.xda-developers.com/showthread.php?t=1570308
Chad The Pathfinder said:
I dont know much about kernels but here is one I've used on my evo 4g that works well. I dont know how it would work on the shift though. http://forum.xda-developers.com/showthread.php?t=1570308
Click to expand...
Click to collapse
I actually really like what that kernel offers. I will probably remove the SBC though as I feel that does more harm than good. I'll keep yall up to date on how this turns out. Lol
Shifted from the bottom of the rabbit hole
Porting kernels....hmm have fun man. I know in order for me to bring the speedy up to at least a 3.x kernel the touch screen drivers along with like audio/video drivers and all that would need added to the msm7x30 source. Along with all the board files and I'm sure there is much more.
Sent from my Nexus 4 using Tapatalk 2
strapped365 said:
Porting kernels....hmm have fun man. I know in order for me to bring the speedy up to at least a 3.x kernel the touch screen drivers along with like audio/video drivers and all that would need added to the msm7x30 source. Along with all the board files and I'm sure there is much more.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
One reason why I'm doing GB kernels
Shifted from the bottom of the rabbit hole
thronnos said:
One reason why I'm doing GB kernels
Shifted from the bottom of the rabbit hole
Click to expand...
Click to collapse
Well if you do an AOSP kernel for the msm7x30 it's most likely jam packed with goodies from other developers, but Sense kernels are rough because there aren't many common kernels for your board. A good place to look for sense kernel hacks would be the G2 section and mdeejays git.
Sent from my Nexus 4 using Tapatalk 2
strapped365 said:
Well if you do an AOSP kernel for the msm7x30 it's most likely jam packed with goodies from other developers, but Sense kernels are rough because there aren't many common kernels for your board. A good place to look for sense kernel hacks would be the G2 section and mdeejays git.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks! I've been talking to drob311 and he is going to help me get started once he gets his computer working again.
Shifted from the bottom of the rabbit hole
thronnos said:
Thanks! I've been talking to drob311 and he is going to help me get started once he gets his computer working again.
Shifted from the bottom of the rabbit hole
Click to expand...
Click to collapse
Yeah I broke SU somehow. Me and sparksco was getting ready to get my 32 bit Linux machine to build android and I was going to build a mako kernel but when I went sudo xxx it went sudo does not exist in xx/bin so I'm all like well fudge.
The last thing I did on it before it broke was go to shut down, as it was shutting down we lost power because someone decided they wanted to run from the police and take out a pole less than 100yds from my house. Well it ain't been right since and I can't find my 2 dollar thumb drive to reinstall lmao AHHHHHHA
Sent from my Nexus 4 using Tapatalk 2