Hello,
I have TomTec ATF3416 2.2 7 inch tablet and I came across with some problems. When I try to turn on the tablet, then monitor show me TomTec logotype and thats all. When I put in MMC card (with firmware update) - nothing happens, when I plug in USB cable to PC, PC don't see tablet. So... What should I do ? Please help me. By the way sorry for my English.
Have a nice day.
Related
Hello,
I was searching the forums, but didn't find anything about this tablet...
Recently I have bought a broken Tablet: Leader Tab R70
CPU: Rockchip 2818A 600MHz
RAM memory: 256MB
ROM memory: 2GB
Screen: 7' 800x480 (WVGA)
OS: Android 2.1 Eclair .
I was hoping I would be able to revive it, but it seems it's not that simple.
The tablet turns on, I can see the droid icon on the left top side of the screen, and then a sign saying "Android_", and that's it.
When I plug it to the PC nothing happens, the PC doesn't see the tablet (I have tried it on two Windows 7 x64 machines), though it seems it does get the charge, as it turns on (same thing on both USB ports). Since the PC won't see it I am unable to flash it by RKAndroidBatchUpgrade (or anything else)
Is there any other way (like by booting a ROM/flash image from SD card) to flash it? Is there a hardware way? (I was able to open the case, didn't find anything magical inside). Is there a way to reset it? Is there a CM somewhere capable of running on this tablet?
I'd appreciate ANY help
Regards
Hi
I have a W500 I did a clean install of windows 8 onto, it booted fine a couple of times and now when I switch it on all I get is the windows key on the tablet blue and a black display. I can tell the tablet is on and is attempting to do somethings as I can see the usb dvd-drive I attached via the keyboard trying to read. I tried holding the windows button on the tablet and powering on but I have had no luck getting the device to even display the bios, I even disconnecting the msata drive to see if it would at least give me a message but I had no luck.
Can anyone help me to unbrick my Iconia W500?
Hi everyone, I'm in a desperate searching of a way to clone the display of my tablet (galaxy note 8) in a window on the display of my laptop. I've already found an optimal product called MyMobiler. I've already installed and used it on my laptop windows 7, but now I've changed the laptop with one windows 8 and I don't understand why MyMobiler doesn't work yet The tablet android is the same, therefore I’m pretty sure that all properties on my tablet are ok. Actually When I try to connect with USB cable it doesn't work (unable to connect). Any suggestion how to solve the problem with MyMobiler or do you know any alternative way/application?
Thank you (and sorry for my english)
Αs the title says, the device does not start, it is completely dead.
I tried to disconnect the battery and reconnect it without any changes.
I tried to charge it with an external source without a result.
Any ideas ??? BIOS chip needs reprogramming???
THANKS
Hi there. I have this model. Have you ever tried to turn on with a HDMI output plugged in? In my case it works. But the bios I'm still looking for
Hello! Recently got the tab. C2D8. Couldn't turn it on, the screen remained black. Thought the tab is dead, but it wasn't. plugged into dc outlet, usb tester showed charge. Then installed the drivers and when connected to pc it appeared in device manager. Put it into dnx mode, flashed firmware. Didn't help. Lastly connected it with hdmi to TV, and there came the picture. The tab screen is very dull, brightness wa set to max, though. Is there a software solution, or is it a hardware defect and should be sent back?
Hi. Same happens to me with Teclast X98 Plus II C2D4.
I need to plug my TV through HDMI. Boots in black screen on the tablet but it's ok on TV.
Android runs with very low brightness on tablet screen but Win10 runs ok. Screen looks perfect on the tablet.
So any possible solution?
Thanks.
Hi, did you find a solution to this issue?
I still have the same problem.
Thanks.
Hello all, I've ported (or rooted?) one of my Nook HD+ tablets to Android 5.1 using the process given by PeteInSequim here. The process went well, and the tablet works great except for one thing. When I connect the Nook to my Acer laptop running Windows 10 Pro, via the usb cable, Windows Explorer does not recognize it, nor does it show up in device manager, and it did prior to the upgrade. If I remove the external microsd card and use the Acer card slot, I can access it. I want to be able to put some games on it for an elderly friend of mine who has trouble using a regular computer / laptop and likes a touch screen. Am I missing something ie. drivers or some other software? Is it possible to side load 5.1 using the laptop versus the wifi on the tablet to decrease the download time? Any help would be greatly appreciated. Thanks, Roger
rmissildine said:
Hello all, I've ported (or rooted?) one of my Nook HD+ tablets to Android 5.1 using the process given by PeteInSequim here. The process went well, and the tablet works great except for one thing. When I connect the Nook to my Acer laptop running Windows 10 Pro, via the usb cable, Windows Explorer does not recognize it, nor does it show up in device manager, and it did prior to the upgrade. If I remove the external microsd card and use the Acer card slot, I can access it. I want to be able to put some games on it for an elderly friend of mine who has trouble using a regular computer / laptop and likes a touch screen. Am I missing something ie. drivers or some other software? Is it possible to side load 5.1 using the laptop versus the wifi on the tablet to decrease the download time? Any help would be greatly appreciated. Thanks, Roger
Click to expand...
Click to collapse
Sorry, I went ahead and upgraded to Nougat and now file explorer sees the nook...
Thanks anyway,
Roger