Database Info

[Q] Touch irresponsive

My glaxy R is not giving proper touch responce. touch responce is very good while the charger or USB cable is connected. but as soon as I remove the cable touch becomes hard i need to puch 2 to 3 times to get proper reponse. I took the mobile to the service center They told me that it has got water & need to replace the Display panel. But I have never let the divece to the water. Any help please. & after this problem battery life is also effeted it is standing only hardly a day or a day & half.

tanveer4m said:
My glaxy R is not giving proper touch responce. touch responce is very good while the charger or USB cable is connected. but as soon as I remove the cable touch becomes hard i need to puch 2 to 3 times to get proper reponse. I took the mobile to the service center They told me that it has got water & need to replace the Display panel. But I have never let the divece to the water. Any help please. & after this problem battery life is also effeted it is standing only hardly a day or a day & half.
Click to expand...
Click to collapse
yes buddy they are correct this is because of the water, use hair drier or similar one which blows hot air then blow some hot air through charger pin so that it will drain the water in the mobile....
Note: use this for just few seconds or else it may damage the other parts...

touch problem
tanveer4m said:
My glaxy R is not giving proper touch responce. touch responce is very good while the charger or USB cable is connected. but as soon as I remove the cable touch becomes hard i need to puch 2 to 3 times to get proper reponse. I took the mobile to the service center They told me that it has got water & need to replace the Display panel. But I have never let the divece to the water. Any help please. & after this problem battery life is also effeted it is standing only hardly a day or a day & half.
Click to expand...
Click to collapse
Step One:
Dear, you can ask the SSC executive that if its so, then when I connect the charger or USB how does it working smoothly..?
The SSC guys are seriously Nuts. They just want to drag the matter from there soldiers to the customers. so, don't become fool from them. Ask them to give proper reason. Be clever & ask them to give proper response else you will report a case in Consumer Court.
Step Two:
If its correct as per MJ, then do what MJ said & Praise to GOD.

Ooopssss !!! this guy say he never dropped his phone into water but SSC say, it has been damaged...
guys, i have a question, i frequently, clean my screen with water or colin (sometimes),
most of the time with water, only screeen and then wipe the screen,
will this affect ???? should i stop doing it ?????????

chandrus1983 said:
Ooopssss !!! this guy say he never dropped his phone into water but SSC say, it has been damaged...
guys, i have a question, i frequently, clean my screen with water or colin (sometimes),
most of the time with water, only screeen and then wipe the screen,
will this affect ???? should i stop doing it ?????????
Click to expand...
Click to collapse
U can use water to screen the display bt take vry vry less water i also do the same n dont let the water go in the charging point.
Dats my opinion bt remember no excessive water usage!!

Kartik pat said:
U can use water to screen the display bt take vry vry less water i also do the same n dont let the water go in the charging point.
Dats my opinion bt remember no excessive water usage!!
Click to expand...
Click to collapse
i just take 2 or 3 drops,
and no, i never go near USB port...

I had the same problem and then suddenly my phone stopped working... ended up having my motherboard replaced as the ssc guys just couldn't detect the issue..
From my galaxy R

device stopped
vbz89 said:
I had the same problem and then suddenly my phone stopped working... ended up having my motherboard replaced as the ssc guys just couldn't detect the issue..
From my galaxy R
Click to expand...
Click to collapse
the problem was there & the device was running fine in this condition from two to three months but today my device is completely stopped not turning on i tried everything removing the battery & replacing the battery connecting to the pc's but it is of no use it is completely dead. I think I shall have to visit once again to the service center. I am afraid here the service centers are not good (KSA) they just want to fool me once again here there are no consumer courts to log a complaint for them i just have to befell what they say. so i am here to look if the same problem have face by anyone.

tanveer4m said:
the problem was there & the device was running fine in this condition from two to three months but today my device is completely stopped not turning on i tried everything removing the battery & replacing the battery connecting to the pc's but it is of no use it is completely dead. I think I shall have to visit once again to the service center. I am afraid here the service centers are not good (KSA) they just want to fool me once again here there are no consumer courts to log a complaint for them i just have to befell what they say. so i am here to look if the same problem have face by anyone.
Click to expand...
Click to collapse
Its ok buddy. Once they accept ur mobile then they have to return it with total repair. So dont worry and ask them for repairing..:thumbup:
Sent from my GT-I9103 using xda premium

I don't know what to do with this mobile yesturday it was swtiched OFF full day & night. today when I try to turn on turn it is On what's the problem I don't know. I can't even take it to the service center because the mobile is running fine now.

tanveer4m said:
I don't know what to do with this mobile yesturday it was swtiched OFF full day & night. today when I try to turn on turn it is On what's the problem I don't know. I can't even take it to the service center because the mobile is running fine now.
Click to expand...
Click to collapse
Its great buddy.. Then wait and if touch wont work great again. Go to SSC.
Sent from my GT-I9103 using xda premium

tanveer4m said:
My glaxy R is not giving proper touch responce. touch responce is very good while the charger or USB cable is connected. but as soon as I remove the cable touch becomes hard i need to puch 2 to 3 times to get proper reponse. I took the mobile to the service center They told me that it has got water & need to replace the Display panel. But I have never let the divece to the water. Any help please. & after this problem battery life is also effeted it is standing only hardly a day or a day & half.
Click to expand...
Click to collapse
I am having the same problem as tanveer4m. the touch will become responsive only when charging. In addition, the charging indicator is kept flashing eventhough i'm not connecting it to any power source. so, when the charging indicator is flashing, the phone is responding well, but when the battery reach below 20%, the charging indicator will not shown and the phone will become irresponsive. Can anyone help me with the problem?
i am currently using blueberry rom, and i tried to change to titanium kernel but the problem still persist.

eamz said:
I am having the same problem as tanveer4m. the touch will become responsive only when charging. In addition, the charging indicator is kept flashing eventhough i'm not connecting it to any power source. so, when the charging indicator is flashing, the phone is responding well, but when the battery reach below 20%, the charging indicator will not shown and the phone will become irresponsive. Can anyone help me with the problem?
i am currently using blueberry rom, and i tried to change to titanium kernel but the problem still persist.
Click to expand...
Click to collapse
problem will be solved when you use the mobile for long time. I didn’t do any repair for my mobile it is running fine now & then but he problem is still there. Sometime it run’s absolutely fine without having any problem.
what you mention is the same problem was there for my mobile flashing, irresponsive touch

[Q] Galaxy Tab 2 constantly rebooting - not charging?

Someone gave me a Tab 2 - GT-P3113TS. I let the battery be dead for a couple days, and yesterday tried charging it (samsung cable plugged into USB wall outlet.) It just shows a hollow battery icon with a spinner, then the battery partially filled with orange, then the screen goes blank. Repeat.
I left it plugged in overnight but it didn't help. Today I tried plugging it into the USB port on my monitor, but does the same thing. Seems like other threads I've read on this say "take it to a service center" but if that's what I really need to do, I'll pass. Any other tricks?
Thanks

snokarver said:
Someone gave me a Tab 2 - GT-P3113TS. I let the battery be dead for a couple days, and yesterday tried charging it (samsung cable plugged into USB wall outlet.) It just shows a hollow battery icon with a spinner, then the battery partially filled with orange, then the screen goes blank. Repeat.
I left it plugged in overnight but it didn't help. Today I tried plugging it into the USB port on my monitor, but does the same thing. Seems like other threads I've read on this say "take it to a service center" but if that's what I really need to do, I'll pass. Any other tricks?
Thanks
Click to expand...
Click to collapse
it seems to be a hardware prob so better take it to service by the way did u root or do any other thing that breaks warranty if not the go

No, I haven't rooted it or really done anything to it, yet. Any idea what the cost of repair might be?

snokarver said:
No, I haven't rooted it or really done anything to it, yet. Any idea what the cost of repair might be?
Click to expand...
Click to collapse
U should have 2 years of warranty!
Sent from my MT11i using xda premium

What happens if you go into device manager while it's plugged in? Do you see "OMAP4430"?
Posted from my Fascinate using XDA Premium

You mean the Device Manager in Windows? I don't use Windows.

What os do you use?
Posted from my Galaxy Tab 2 with CM10.1

snokarver said:
Someone gave me a Tab 2 - GT-P3113TS. I let the battery be dead for a couple days, and yesterday tried charging it (samsung cable plugged into USB wall outlet.) It just shows a hollow battery icon with a spinner, then the battery partially filled with orange, then the screen goes blank. Repeat.
I left it plugged in overnight but it didn't help. Today I tried plugging it into the USB port on my monitor, but does the same thing. Seems like other threads I've read on this say "take it to a service center" but if that's what I really need to do, I'll pass. Any other tricks?
Thanks
Click to expand...
Click to collapse
MultipleMonomials said:
What happens if you go into device manager while it's plugged in? Do you see "OMAP4430"?
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
Hi have the same issue with my Tab and when i plug it to the computer it just reconnecting and that it say faild to install OMAP4430 drivers.

Sorry, that means your tab is permabricked. It is technically fixable, but only with a dev who either works at Texas Instruments or one who has intimate knowledge of the tool called OMAP Flasher.
Posted from my Fascinate using XDA Premium

Had the same problem with my 7" tab
MultipleMonomials said:
Sorry, that means your tab is permabricked. It is technically fixable, but only with a dev who either works at Texas Instruments or one who has intimate knowledge of the tool called OMAP Flasher.
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
Dropped mine in water, couldn't take the battery out fast enough, when i did finally get it dried out it was in the same loop u described. I assume that the water had enough minerals in it to cause a minor short across some pins, I took out the mother board and shield, got a injector and put dis-stilled water over every pin and ic on the board including all the contacts. used Qtips to clean off the pins and put water on again. Then used a hair dryer to dry it off. Plugged in the charger, let it go for a few hours and the unit was up and running like new, Be careful of the speakers and take the camera off, and the board out of the case first.

buck95 said:
Dropped mine in water, couldn't take the battery out fast enough, when i did finally get it dried out it was in the same loop u described. I assume that the water had enough minerals in it to cause a minor short across some pins, I took out the mother board and shield, got a injector and put dis-stilled water over every pin and ic on the board including all the contacts. used Qtips to clean off the pins and put water on again. Then used a hair dryer to dry it off. Plugged in the charger, let it go for a few hours and the unit was up and running like new, Be careful of the speakers and take the camera off, and the board out of the case first.
Click to expand...
Click to collapse
Thats very interesting! What injector did u use? Whats qtips? A contact cleaner?
sent from my xperia neo v

mitchellreece said:
Thats very interesting! What injector did u use? Whats qtips? A contact cleaner?
sent from my xperia neo v
Click to expand...
Click to collapse
Had one of those injectors like u use to inject liquids into a turkey, Simply a plastic tube with a piston (like u get a shot from the doctor) to let me control the amount and location of where I wanted the water, Could use anything, even just dump the water on. I checked the amount of total dissolved solids in the water I dropped my tab and it was around 500 PPM, not really that high, but enough when it evaporated, minerals were deposited on the pins Id guess. The water will puddle on the boards, so i used a Qtip (the thing u use to clean your ears) to clean up the pins, If i had I might have used a new tooth brush. Important that once you clean the pins to put more water on to wash the deposits away. I did not use contact cleaner, Distilled water has no minerals and will dissolve out the minerals dried on the board. You don't need cleaner, nor would I recommend it since it may cause other issues. There is nothing I saw on the board other than the speakers and camera that looked like ti would be harmed by distilled water. I also cleaned the 5 or so ribbon connector junctions including the charging port. Guessing this would work on any phone or electronic devise that got wet with lower tds water that didnt short out.

[Q] [HELP] Scrolling Problem

last night, my phone was overheating. and then i'm trying to cool it down by putting it in front of a fan. when i use my phone, my scrolling is error. it stops when my thumb/fingers is not touching ( do you get it ? :silly: ) . on a normal phone, the screen keeps scrolling even if my finger/thumbs not touching and slow down until stops. but not with my phone. it just stops without slowing down...
can anyone help me ? :fingers-crossed:
sorry for my bad english

Try restarting??
And JB has higher inertia while scrolling. That means if you scroll lightly, it will stop very fast, unlike Gingerbread 2.3.x.
Also, a possible cause might be that you were charging. XL has a slightly aberrant scrolling response while charging, most likely due to the interference caused by the charging battery.

Yes. It worked
Btw, how did you know that xperia L has problem with charging?
Sent from my C2105 using xda app-developers app

SayidAchmad159 said:
Yes. It worked
Btw, how did you know that xperia L has problem with charging?
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
Hi!
I noticed this problem with mine too. I was charging my phone and using it on Facebook. Scrolling worked fine but when mi finger was on the screen (just touching the screen, no scrolling), the image went up and down. It looked like the screen didn't know what to do.
But I was not using the charger given in the box, I was using an older one given with my Xperia Mini Pro from 2011.
When I use the charger given in the box, there is no problem.
I've seen this problem on X10 Mini Pro too.

Outpapa said:
Hi!
I noticed this problem with mine too. I was charging my phone and using it on Facebook. Scrolling worked fine but when mi finger was on the screen (just touching the screen, no scrolling), the image went up and down. It looked like the screen didn't know what to do.
But I was not using the charger given in the box, I was using an older one given with my Xperia Mini Pro from 2011.
When I use the charger given in the box, there is no problem.
I've seen this problem on X10 Mini Pro too.
Click to expand...
Click to collapse
i have the same problem too
but it still exist even if i used the sony charger
do you know why this happens?:silly:

terraworlds123 said:
i have the same problem too
but it still exist even if i used the sony charger
do you know why this happens?:silly:
Click to expand...
Click to collapse
I don't know where it comes from, sorry.

as far as I know, it happens with all chargers. But maybe it just escapes attention sometimes? The charging battery affects the capacitive touchscreen response.

Soumitra.5693 said:
as far as I know, it happens with all chargers. But maybe it just escapes attention sometimes? The charging battery affects the capacitive touchscreen response.
Click to expand...
Click to collapse
When I saw this "problem" I let the phone charging with my "older" charger. But when it was finished, I tried it with the new one. I went on every application that need to scroll but all was right.
It may be something with electricity quality, like speakers which have interference... (That's just an idea)

yeah. It happens only sometimes. I suspect when the phone draws considerable charge from battery, and the battery from the charger, resulting in higher electromagnetic interference.

Soumitra.5693 said:
yeah. It happens only sometimes. I suspect when the phone draws considerable charge from battery, and the battery from the charger, resulting in higher electromagnetic interference.
Click to expand...
Click to collapse
You're probably right.

Screen sensitivity when in charge

Hello,
Did you notice a decrease in sensitivity of the touchscreen while the phone is charching ? I noticed that today and i was wondering if my phone could be faulty...

evivbulgroz said:
Hello,
Did you notice a decrease in sensitivity of the touchscreen while the phone is charching ? I noticed that today and i was wondering if my phone could be faulty...
Click to expand...
Click to collapse
Screen sensitivity has no relation with charging. Do u you have any other specific scenario rather than charging when it got happened ?

vsriram92 said:
Screen sensitivity has no relation with charging. Do u you have any other specific scenario rather than charging when it got happened ?
Click to expand...
Click to collapse
No, the touchscreen is less responsive when the phone is plugged in.There is no other scenario in which it happens.

evivbulgroz said:
No, the touchscreen is less responsive when the phone is plugged in.There is no other scenario in which it happens.
Click to expand...
Click to collapse
Do you have a case on the device? Reason I say is that I am waiting for my case to arrive and I notice that the screen sometimes does not respond. When my wife complained about it also I noticed when watching her use the device her thumb on the hand that was holding the device was touching the edge of the front glass. She moved her thumb and responsiveness came back. This phone is super thin compared to my previous phone. Just an idea.

I notice that too and in my old phone as well. But only if I use a different charger with stronger power output. It won't respond to touch at some points.
Sent from my Galaxy Tab 3 using XDA Labs

adriansticoid said:
I notice that too and in my old phone as well. But only if I use a different charger with stronger power output. It won't respond to touch at some points.
Click to expand...
Click to collapse
I only had that problem with my legacy devices...lol. Sometimes a simple reboot while plugged in helps.

It happens on my old device too. This is caused by using third party charger. If u do so, please do not.
So far using honor 8 while charging using original charger is just fine. I even game on it sometimes. No touch screen issue.

Tmobilefan906 said:
I only had that problem with my legacy devices...lol. Sometimes a simple reboot while plugged in helps.
Click to expand...
Click to collapse
Yeah I noticed it in Samsung Galaxy Y.
Sent from my Galaxy Tab 3 using XDA Labs

I wonder if this happens with fast charger and Huawei 1.5A charger that comes bundled in some countries...

zinko_pt said:
I wonder if this happens with fast charger and Huawei 1.5A charger that comes bundled in some countries...
Click to expand...
Click to collapse
No it won't. As we said tbis only happens with 3rd party chargers.
Sent from my Galaxy Tab 3 using XDA Labs

I suspect some months ago Huawei slowly started changing kernel for Kirin socs, changing fast charge behavior.

I have the same problem, mostly when i use other chargers

krispy321 said:
I have the same problem, mostly when i use other chargers
Click to expand...
Click to collapse
For Kirin SOC it's proprietary chargers but for Qualcomm any QC certified will do.
You have to use either H8 or M8 original fast chargers.

I'm using the original charger, but I have this problem only at certain moments in the day.Must be that honor 8, or the charger is sensitive to EM perturbations.

evivbulgroz said:
I'm using the original charger, but I have this problem only at certain moments in the day.Must be that honor 8, or the charger is sensitive to EM perturbations.
Click to expand...
Click to collapse
Might be the electric current causing it.
Sent from my Galaxy Tab 3 using XDA Labs

evivbulgroz said:
I'm using the original charger, but I have this problem only at certain moments in the day.Must be that honor 8, or the charger is sensitive to EM perturbations.
Click to expand...
Click to collapse
Have you tried to plugged in a protected against discharges socket? One of those fancy surge protected and stuff...

Do you have a case on the device? I had a similar issue while holding the device and accidentally touching the edge of the front glass with my holding hand and trying to tap. The screen will be unresponsive. A good rubber case fixed it for me. Just an idea.

It could be the case, but I'd definitely see does it work on a surge protected socket, ensuring the supply is constant.

I apologize in advance for necroing this thread.
I have an L04 honor 8 and i've just OTA updated to B360, everything working fine but i have this very problem. When charging the phone (genuine huawei fast charger) touchscreen doesn't respond as it should and scrolling is awful. As soon as I unplug the phone it gets back to normal.
Any ideas? It didn't have this beahaviour before upgrading.

chicojulius said:
I apologize in advance for necroing this thread.
I have an L04 honor 8 and i've just OTA updated to B360, everything working fine but i have this very problem. When charging the phone (genuine huawei fast charger) touchscreen doesn't respond as it should and scrolling is awful. As soon as I unplug the phone it gets back to normal.
Any ideas? It didn't have this beahaviour before upgrading.
Click to expand...
Click to collapse
Tale case off, take screen protector off, clean screen, try another power outlet, try hard reboot(hold power button until reboot).

ghost touch revealed

hey hey hey fellas....atlast found something which satisfies everyone regarding ghost touch....the latest qualcomm has made severe changes inside turbo powered charger which couldn't able to stabilize the input voltage fluctuations. and that is why we all expirence ghost touch... i even checked my socket with Multimeter...hell yeah that was true....
atlast ive plugged stock moto turbo charger to the stabilizer, believe it or not i played nova 3 for exactly 44 mins beside charge was on !
so this caused ghost touch !
hope you guys understood

trust me....
sweet thing abt moto g4 plus is...it never ever lags though it heats up a bit ! and can handle heavy games like nova3 like charm
have a try... connect it to a stabilizer

tech virus said:
trust me....
sweet thing abt moto g4 plus is...it never ever lags though it heats up a bit ! and can handle heavy games like nova3 like charm
have a try... connect it to a stabilizer
Click to expand...
Click to collapse
what stabilizer? can you elaborate. is that something we can purchase from Amazon?

stablizer, one we use for fridge and tv...
they give stable current to all electrical devices !
when i connected my charger to it, i had no problem...to be frank my charging temp was 41deg(charged from 0-100, took 75mins to charge, pretty low temp and took less time to charge even)
jus search for stablizer in amazon ! btw ever home mostly they'll be using it, else u cud buy one actually very useful one

Stabilizer? Isn't the same as a no break? Cuz I have one for my PC and is were I also connect the turbo charger and still have the ghost touch issue time to time... :/ Or is it a difference between the stabilizer and a no break?

Quartereric said:
Stabilizer? Isn't the same as a no break? Cuz I have one for my PC and is were I also connect the turbo charger and still have the ghost touch issue time to time... :/ Or is it a difference between the stabilizer and a no break?
Click to expand...
Click to collapse
jus search for stablizer in amazon

Quartereric said:
Stabilizer? Isn't the same as a no break? Cuz I have one for my PC and is were I also connect the turbo charger and still have the ghost touch issue time to time... :/ Or is it a difference between the stabilizer and a no break?
Click to expand...
Click to collapse
Stabilizer is the small one and no break or ups system is the big black box.
Hope this clears the doubt... :laugh:

vicky18189 said:
Stabilizer is the small one and no break or ups system is the big black box.
Hope this clears the doubt... :laugh:
Click to expand...
Click to collapse
So you carry that with you while traveling?

derausgewanderte said:
So you carry that with you while traveling?
Click to expand...
Click to collapse
Lol it's small but not that small hehehe :laugh:
In India in many parts of the country the electricity supply voltage fluctuate so to prevent electronic items from getting fried by that fluctuation we use stabilizers and ups or no break are used mainly for desktops which provide some extra time to close the system when lights go off.
Some ups comes I integrated with stabilizer some doesn't you have to check with the supplier of yours is having a stabilizer or not.

derausgewanderte said:
So you carry that with you while traveling?
Click to expand...
Click to collapse
if am that concerned of playing games and cud nt able to keep my mob aside then i will be carrying this instead :silly:

I have the same problem of the ghost touch and the solution I found was to disable the Motorola Active Display so that it does not make strong changes in the brightness of the screen.
I realized that if you make sudden changes in the brightness level, the effect of the phantom touch starts, for example if you have the brightness in half and change it very suddenly to maximum the effect takes place, if you want to make the change of Shine must be done gradually
mod edit: Translated to english via google translate..
if something is incorrect, please feel free to edit ..
PLS. ENGLISH ONLY NEXT TIME

In my case Im facing ghost touches without charging, specially when the battery is in 100% or less than 10%

Passthrough charging power bank!
Instead of stabilizer, I will test with power bank with quick charge 2.0 that can charge the power bank while it loads the G4 Plus. (Passthrough charging)

cerberusss said:
In my case Im facing ghost touches without charging, specially when the battery is in 100% or less than 10%
Click to expand...
Click to collapse
in this case i prefer you to replace mobile....it seems like your lcd sucks more juice due to defect in manufacturing...

Bradock_73 said:
Instead of stabilizer, I will test with power bank with quick charge 2.0 that can charge the power bank while it loads the G4 Plus. (Passthrough charging)
Click to expand...
Click to collapse
u can...but it wil charge your mob lil slowly...moto is famous for its latest Qualcomm turbo charging 3.0. so try 3.0 output

tech virus said:
hey hey hey fellas....atlast found something which satisfies everyone regarding ghost touch....the latest qualcomm has made severe changes inside turbo powered charger which couldn't able to stabilize the input voltage fluctuations. and that is why we all expirence ghost touch... i even checked my socket with Multimeter...hell yeah that was true....
atlast ive plugged stock moto turbo charger to the stabilizer, believe it or not i played nova 3 for exactly 44 mins beside charge was on !
so this caused ghost touch !
hope you guys understood
Click to expand...
Click to collapse
Now i am using Samsung 5v 2.0A charger.Ghost touch problem gone.but its not fast charger.its take 2h 30min to full charge.But No heating issue.
When i using turbo charger.ghost touch is arise again.but when i was use another moto turbo charger borrowed from friend.its is not cause ghost touch.
So problem is in my Turbe Charger?
Sry for my bad english.

prakash27091987 said:
Now i am using Samsung 5v 2.0A charger.Ghost touch problem gone.but its not fast charger.its take 2h 30min to full charge.But No heating issue.
When i using turbo charger.ghost touch is arise again.but when i was use another moto turbo charger borrowed from friend.its is not cause ghost touch.
So problem is in my Turbe Charger?
Sry for my bad english.
Click to expand...
Click to collapse
Not necessarily. My son's G4 had the same problem. Ghost touch when on charger and later on some issues when off the charger. We did RMA and received the phone back after a week. No more issues even at high CPU loads using the same charger.

derausgewanderte said:
Not necessarily. My son's G4 had the same problem. Ghost touch when on charger and later on some issues when off the charger. We did RMA and received the phone back after a week. No more issues even at high CPU loads using the same charger.
Click to expand...
Click to collapse
its all about voltage ! mobiles which has ghost touch is oly due to the socket voltage fluctuation....but device which has ghost touch even at charge off is kinda defect piece better go with replacement

ghost touch: https://www.youtube.com/watch?v=iqXhyDvSIhA

poshed said:
ghost touch: https://www.youtube.com/watch?v=iqXhyDvSIhA
Click to expand...
Click to collapse
yep, that needs to go right back for repair.