Im going to use JScott30's gingerbread 2.3.6 Odin to flash from gtg's infused 1.6 and want to run Aeon 1.3.1
My question is... do i need to flash the gingerbread bootloader before flashing Aeon or is that step even necessary?
superman04p said:
Im going to use JScott30's gingerbread 2.3.6 Odin to flash from gtg's infused 1.6 and want to run Aeon 1.3.1
My question is... do i need to flash the gingerbread bootloader before flashing Aeon or is that step even necessary?
Click to expand...
Click to collapse
I believe jscott doesnt have bootloaders....so if you want to ever load ics later you have to address it then...but you can do what you just stated/asked
if you check my signature for the ISET page...return to stock has lots of info...
and make sure you slap thanks to jtscott & bigfau...
So Aeon 1.3.1 doesnt need GB bootloader
superman04p said:
So Aeon 1.3.1 doesnt need GB bootloader
Click to expand...
Click to collapse
no but you might as well put them so you will have them for later...? whatcha think...?
take a look at the factory/return to stock section for one click heimdall...read it thru...by qkster and thank him...
see my signature for ISET page...factory/return to stock....
BigFau get an Infuse yet?
bigjoe2675 said:
I believe jscott doesnt have bootloaders....
Click to expand...
Click to collapse
There is a separate Odin option to flash GB bootloaders in my rooted UCLB3 Odin thread. So, if anyone needs those, they are there.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Related
Is is possible to have a Cyanogenmod 7 for a rooted Samsung Galaxy S i9000, is theres any thread that have a detailed instruction on how to put this on your SGS specifically? thanks, a reply will be much appreciated...
http://forum.xda-developers.com/showthread.php?t=924400
Check here
crazy25000 said:
http://forum.xda-developers.com/showthread.php?t=924400
Check here
Click to expand...
Click to collapse
Thanks man, Im checking it right now..thanks for the help.... are you already on CM7?
Jayfunk said:
Thanks man, Im checking it right now..thanks for the help.... are you already on CM7?
Click to expand...
Click to collapse
Yup, I've flashed almost every room and I'm sticking to this now that it's stable. I really think you'll love it, let me know if you need help.
crazy25000 said:
Yup, I've flashed almost every room and I'm sticking to this now that it's stable. I really think you'll love it, let me know if you need help.
Click to expand...
Click to collapse
Just a question.. I have SGS international editon flashed with gingerbread 2.3.3 XXJVK.. do I need to downgrade my firmware first to froyo before I can put CM7 to my phone..well the thread made me more confused hehehe
Jayfunk said:
Just a question.. I have SGS international editon flashed with gingerbread 2.3.3 XXJVK.. do I need to downgrade my firmware first to froyo before I can put CM7 to my phone..well the thread made me more confused hehehe
Click to expand...
Click to collapse
yeah you have to flash a froyo package that has the froyo bootloaders. try JPU or EZbase.
runedrune said:
yeah you have to flash a froyo package that has the froyo bootloaders. try JPU or EZbase.
Click to expand...
Click to collapse
Correct, you have to flash froyo ROM, then flash a stock voodoo + froyo kernel. From here follow the instructions from the OP who posted the CM7 ROM.
Im on ICBINB rom with bali's v3.3Uv FW v2.2.1 thanks too the help of desxton702 now im looking at flashing differnt roms but most of them are under GB how would i go about flashing GB and keeping bali's v3.3Uv because i love the bat life im getting now?
http://forum.xda-developers.com/showthread.php?t=1223765
GB = No Froyo Kernels.....
Is GB's Wifi still meh? and where would i get the latest GB rom with rooted?
kaz050 said:
Is GB's Wifi still meh? and where would i get the latest GB rom with rooted?
Click to expand...
Click to collapse
Follow the instructions on the link I posted previously to make sure you get GB flashed correctly - correct bootloaders / no ext 4 issues etc...
Then check the Dev section for the latest roms - Valhala 1.1 is nice....
I don't use Wifi a whole lot so I can't really comment on that.
kaz050 said:
Is GB's Wifi still meh? and where would i get the latest GB rom with rooted?
Click to expand...
Click to collapse
yes, wifi on GB is still meh. All roms are in the Development section
the reason i ask is because i see alot of roms out for GB,the rom im looking at is this one http://forum.xda-developers.com/showthread.php?t=1278389 and im looking at that New Miui rom but when its more stable.
kaz050 said:
the reason i ask is because i see alot of roms out for GB,the rom im looking at is this one http://forum.xda-developers.com/showthread.php?t=1278389 and im looking at that New Miui rom but when its more stable.
Click to expand...
Click to collapse
All of the ICBINB Roms are great.
ok so all i have too do is follow that link you posted get that all done and i can flash that ICBINB rom then thats it or is there a lil more i would need too do sorry for all the questions last time i did this i ended up in bootloops and a few semi bricks
kaz050 said:
ok so all i have too do is follow that link you posted get that all done and i can flash that ICBINB rom then thats it or is there a lil more i would need too do sorry for all the questions last time i did this i ended up in bootloops and a few semi bricks
Click to expand...
Click to collapse
Just read OP instructions for whatever ROM you are about to flash...very carefully until you completely understand the process. If you have any questions, read through the entire associated thread as they have probably already been asked and answered.
Just read, read, read. All of the information you need is available on these boards. I've bootlooped and soft bricked my phone several times, and each time it was because I hadn't followed the OP instructions to a "T".
If you have done everything above and still have a question it is likely that it is a good question, and there are a ton of really nice helpful people that will jump in and help you out.
EDIT: GB battery life is awesome.....
yeah and your helping me out is great looked around found this http://forum.xda-developers.com/showthread.php?t=1215748 seems too be easy too get on GB with no mess up
Just so the ops not alone, I flashed the deodexed and rooted kd1 then the bali 3.3uv kernal. When I try and flash adrenaline shot 7 i get stuck at the boot logo, any ideas here?
If any1 can help you get out of the loop, that would be great but if you can't you can try the following.
1. If you can get into CWM you can try to do a factory reset or reinstall the rom.
2. If you can not get into CWM you can try to use odin and flash a new rom.
the thread can be closed now thanks for all the help htaak
D12005 said:
Just so the ops not alone, I flashed the deodexed and rooted kd1 then the bali 3.3uv kernal. When I try and flash adrenaline shot 7 i get stuck at the boot logo, any ideas here?
Click to expand...
Click to collapse
Did you try to manually push the files in through File explorer? Also, I think dsexton made the adrenaline shot on gingerbread roms, so it may not be 100% compatible on a froyo build. You might want to try some older versions of it if they are available.
kaz050 said:
the thread can be closed now thanks for all the help htaak
Click to expand...
Click to collapse
Glad to have helped steer you in the right direction. ;-]
Sent from my SGH-T959V
I got sgs4g rooted and installed trigger rom on it and upgraded to bali kernel. I would like to upgrade to gingerbread rom stock that samsung released 2.3.5 and also try a custom gb rom after. Ive been reading a lot and my only question is all posts here say from froyo use one of the two gb roms with bootloaders, to flash gingerbread, then flash back to kc1 or kd1 so I can run cwm and flash gingerbread again. then im set. The samsung release does not state from froyo to do anything else.but flash gingerbread from odin and yer done. So would just odining the gb rom from samfirmware.com just be it? Or would I need to flash ones with boot loaders firat and back to kd1? Or is back to kd1 just for flashing gb rom from cwm which I currently have on cwm. I just want to know if.i should do the bootloader flashing of kc1/kd1 from trigger froyo rooted cwm to get to gingerbread stock or gb rom like octaine or audiophile. Please anyone ? Ive read everything and know the procedure just wondering about if flashong bootloaders... How ppl with straight stock w/o rooy would know to do extra steps or not. Thanks
Sent from my SGH-T959V using XDA App
You're confusing yourself and me. Go the the development section & look for The GB Starter guide by fbis251. Sure, painless, fast way to get on gingerbread.
Sent from my rockin' Galaxy S 4G using XDA Premium App
If u get a loop..which happened to me hit three button recovery and factory reset...u should be good, then kj1 kernel from drhonk to root...if u wish.
Sent from my SGH-T959V using xda premium
I will do the kj1 kernel. I did update through keis. Phone calls have no sound unless I press speaker twice, anyone ?
Sent from my SGH-T959V using XDA App
I getting confused by your post. But from what I'm getting, I think you want to know how to downgrade so you can upgrade to KJ6 on Kies. Odin or CWN down to KB5 or KD1 then connect to Kies. Downgrading to KD1 didn't work for me, but downgrading to KB5 did.
Then use SOC 2.2 to root your phone, will hang and fail the first time but will root the second time. As for CWN, you can use dr. hong KJ1 custom kernel but that will downgrade your kernel down to KJ1 from KJ6. If you want KJ6 kernel with CWN, wait for dr. honk.
Newb question here. I flashed my captivate down to stock rom (2.1 eclair)..can I reflash to the latest ICS flash rom using odin or do I have to update in build order (eclair - froyo - gingerbread - then ICS). I'd like to stick with odin if possible. Thanks again for all the help.
You can jump to any ROM you like. No need to go in any order.
turbomonkey80 said:
You can jump to any ROM you like. No need to go in any order.
Click to expand...
Click to collapse
This is true only if you have gingerbread bootloaders. If you dont, you need to flash the gingerbread bootloaders before you flash a gingerbread or ICS ROM.
capocaccia said:
This is true only if you have gingerbread bootloaders. If you dont, you need to flash the gingerbread bootloaders before you flash a gingerbread or ICS ROM.
Click to expand...
Click to collapse
Unless the given ROM doesn't require them
Sent from my CM9 ICS i897 Captivate
New to the infuse forums (so hoping I don't get beat up too much) basically Im trying to Downgrade my brothers infuse from the att ota gb update uclb3 back to froyo or upgrade to a custom gb rom, he is super pissed at me because his phone is super laggy and im the one that updated his phone. Tried to read through stuff but got a lil confused as the title states (I think I got spoiled from the i777 forums) any how if someone can point me to a good guide to follow from rooting to installing a rom or just reverting to stock froyo and a nice stable rom suggestion that would be nice. odin method preferred as i have no experience with heimdall. again appreciate the help and sorry if this is a redundant post (puts on flame retardant suit :angel
Links to everything needed for the infuse from Root to Unbrick(restore to stock froyo, or GB), to Custom ROMs and MODs can be found Here in an orderly fashion.
http://forum.xda-developers.com/showthread.php?t=1610374
I myself suggest using Qksters Heimdall One Click to get the phone back to stock Gingerbread UCBL3, Using SuperOneClick to root the phone, then as far as custom ROMs, Might I suggest AEON v1.4?
AEON can be found here http://forum.xda-developers.com/showthread.php?t=1545239
Heimdall One Click can be found here http://forum.xda-developers.com/showthread.php?t=1524081
Also when going with Heimdall one click theres another package provided by qkster for CWM recovery, its the Kernel one click package which can be found in the same link above.
Need any more info? Dont be afraid to ask!
MaliciousIntent69 said:
Links to everything needed for the infuse from Root to Unbrick(restore to stock froyo, or GB), to Custom ROMs and MODs can be found Here in an orderly fashion.
http://forum.xda-developers.com/showthread.php?t=1610374
I myself suggest using Qksters Heimdall One Click to get the phone back to stock Gingerbread UCBL3, Using SuperOneClick to root the phone, then as far as custom ROMs, Might I suggest AEON v1.4?
AEON can be found here http://forum.xda-developers.com/showthread.php?t=1545239
Heimdall One Click can be found here http://forum.xda-developers.com/showthread.php?t=1524081
Also when going with Heimdall one click theres another package provided by qkster for CWM recovery, its the Kernel one click package which can be found in the same link above.
Need any more info? Dont be afraid to ask!
Click to expand...
Click to collapse
Thanks got a little overwhelmed sooo many guides lol. So since he is on the borked att gb already (came with froyo out of the box) guess I'll move on to rooting and installing a custom rom. Thinking of sticking with gb based roms. Taking the kiss approach since my brother is not that tech savvy and my goal is to find the most stable rom for him (his answer to bugs is bro fix this now!!!) Lol he did want ics cause he saw mine but idk how stable the ics roms for the infuse is yet so I got reading to do. Guess he'll just have to put up with att crap a day or two longer.
Sent from CM9 powered XDA posting machine
aj9507 said:
Thanks got a little overwhelmed sooo many guides lol. So since he is on the borked att gb already (came with froyo out of the box) guess I'll move on to rooting and installing a custom rom. Thinking of sticking with gb based roms. Taking the kiss approach since my brother is not that tech savvy and my goal is to find the most stable rom for him (his answer to bugs is bro fix this now!!!) Lol he did want ics cause he saw mine but idk how stable the ics roms for the infuse is yet so I got reading to do. Guess he'll just have to put up with att crap a day or two longer.
Sent from CM9 powered XDA posting machine
Click to expand...
Click to collapse
If you can use heimdall, the simplest way is to put the phone into download mode and flash my uclb3 stock package or adam outler's stock package.
The second post in each op contains the insecure kernel. These kernels are also flashed in download mode. Once these custom kernels are flashed, you can boot into CWM and then flash the custom firmware you want.
If you are familiar with Odin, check out some of jscott30's thread. He has several Odin premade rooted firmware package that are also very nice.
Once you have the firmware you want, Zen has cooked up a few kernels that can overclock at 1400 or 1600. These will provide quite a bit of speed over stock kernels.
Taking the leap today hope everything goes to plan
Sent from my SGH-I777 using xda app-developers app
aj9507 said:
Taking the leap today hope everything goes to plan
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Leap...screw that take a running flying jump...leave the parachute behind...
we are here if you need help.