Related
I rooted my TF101 model B80 using RazorClaw (nvflash is a no-go for this model). Installed CWM, all was well. I tried to install Prime ROM from CWM, and was unimpressed; tried to restore my Nandroid backup of original rooted OS. Now, Transformer will not boot into any recovery (neither CWM or original green android), and screen comes up garbled. Is there any way I can restore my original stock by merely putting a particular image on my external sd card?
Any other suggestions welcome, I just can't get to a screen (recovery or otherwise) where there is any readable text I can respond to. Nor can I turn the device off. It will continue to reboot in this fashion. When I get home today I'll be able to start from a dead battery.
Thanks
Did you wipe before restore?
davebugyi said:
Did you wipe before restore?
Click to expand...
Click to collapse
Yes, I did a full wipe including dalvik cache before all restores. At this point, though, my primary concern is just finding a path back to usability!
DIncLover said:
I rooted my TF101 model B80 using RazorClaw (nvflash is a no-go for this model). Installed CWM, all was well. I tried to install Prime ROM from CWM, and was unimpressed; tried to restore my Nandroid backup of original rooted OS. Now, Transformer will not boot into any recovery (neither CWM or original green android), and screen comes up garbled. Is there any way I can restore my original stock by merely putting a particular image on my external sd card?
Any other suggestions welcome, I just can't get to a screen (recovery or otherwise) where there is any readable text I can respond to. Nor can I turn the device off. It will continue to reboot in this fashion. When I get home today I'll be able to start from a dead battery.
Thanks
Click to expand...
Click to collapse
I had the same situation..I used the unbrick method:
http://forum.xda-developers.com/showthread.php?t=1123429
then you could try restore a backup ..
To turn off the device press the power button for 10-15 seconds..
bruuuno said:
I had the same situation..I used the unbrick method:
http://forum.xda-developers.com/showthread.php?t=1123429
then you could try restore a backup ..
To turn off the device press the power button for 10-15 seconds..
Click to expand...
Click to collapse
I can try this when I get home today.... I'm just concerned because the method involves nvflash .... which I thought didn't work from the newer TF models (I have a model B80). I needed to wait for the RazorClaw exploit because previous attempts at using nvflash failed....
Then NVFlash will fail still...
davebugyi said:
Then NVFlash will fail still...
Click to expand...
Click to collapse
So am I hopelessly hosed?
Sounds like this problem
http://forum.xda-developers.com/showthread.php?t=1321207&highlight=green+screen
Being you can't get back into CWM not sure how you'll flash the stock kernel.
HAve you tried Holding Vol Down button plus Power button till you get prompt to enter recovery at which time immediately push Vol up button withion 5 sec.
baseballfanz said:
Sounds like this problem
http://forum.xda-developers.com/showthread.php?t=1321207&highlight=green+screen
Being you can't get back into CWM not sure how you'll flash the stock kernel.
HAve you tried Holding Vol Down button plus Power button till you get prompt to enter recovery at which time immediately push Vol up button withion 5 sec.
Click to expand...
Click to collapse
OK .... my bad.... I guess I wasn't pressing the buttons in the right sequence/duration. I CAN get to CWM!
So, once again, I try to restore the Nandroid backup and after rebooting, end up with the screen situation as in the reference you provided.
So, I am assuming my Nandroid backup is not restoring the kernel that it needs. I was running a recent OTA update; I believe the version was 8.6.5.19.
Where can I get the appropriate kernel to install from CWM? Does it matter in what order I install the kernel and the Nandroid backup?
DIncLover said:
Where can I get the appropriate kernel to install from CWM? Does it matter in what order I install the kernel and the Nandroid backup?
Click to expand...
Click to collapse
Look here
http://www.gnufabio.com/revolver/dls/
Same issue, no recovery though
Hi,
I have the same issue as the original poster, B80 serial, RazorClaw root. However, when I boot to recovery I get the green android with yellow triangle and exclamation mark.
I need to restore a recovery on my device as I may need to unroot to send to Asus. I have an even deeper problem of having to have the device connected to power for it to turn on after shut down.
However my main question is for that serial number and root method, what is the best way to flash a recovery on my device (stock or CWM) if I can not get into recovery to begin with?
P.S. RecoveryInstaller will not work, after installing the apk, I click the flash recovery button, the system holds for a bit, then nothing happens.
I will continue to search the forms for some answers, any insights or direction will be appreciated.
I can get into apx mode.
Thank you community!
I think you can flash the recovery via the staging partition. Search around the TF section, it's in here somewhere. Although, I wonder why the 1 click recovery didn't work?
gee one said:
I think you can flash the recovery via the staging partition. Search around the TF section, it's in here somewhere. Although, I wonder why the 1 click recovery didn't work?
Click to expand...
Click to collapse
Everything I see in the forms requires one of several conditions which my TF doesn't currently meet.
1. Recovery. I can not go into any recovery, thus I can not perform any flashing of any other rom or recovery.
2. B70 or later. Because of the security in the boot for these new serials, I can not use the NVFlash tools to un-brick / flash.
I am already rooted, however I do not know the reason for lack of recovery on this device. I unfortunately bought it yesterday from Craigslist, so not sure what this guy did before I got it.
I searched for flashing recovery staging partition and did not find anything immediately relevant. Please advice is there is a different wording I should use in my search as I am now getting an immense download on all of this trying to figure out what to do. I am also fairly new to Android devices having 1 other phone that is rooted.
Thank you for all the support and quick response! wonderful community here.
Try searching for posts with /dev/block/mmcblk0p4
This is particularly dangerous because you don't have access to nvflash. If you get bootloops, it is bricked. You have to be sure that whatever you flash will be 100% compatible with what you have now.
Also, when you try to boot into recovery, what does the text at the top say? There should be a version number in there somewhere.
sent from my cyanogen(mod) vision
gee one said:
Try searching for posts with /dev/block/mmcblk0p4
This is particularly dangerous because you don't have access to nvflash. If you get bootloops, it is bricked. You have to be sure that whatever you flash will be 100% compatible with what you have now.
Also, when you try to boot into recovery, what does the text at the top say? There should be a version number in there somewhere.
sent from my cyanogen(mod) vision
Click to expand...
Click to collapse
Thank you gee one. I have since been able to install clockworkmod. My issue with the power not turning on if not plugged in still persists, I have started a separate thread.
I found your post on the staging partition here:
http://forum.xda-developers.com/showthread.php?t=1309949&highlight=power
Do you recommend this for the issue still persisting?
If so, considering I am on 8.6.5.19 will I have to use the blob from that? It is not on Asus website as I got it from the firmware update option in the settings before loading up my new ROM.
Do you recommend this step as the only resolution or is there another way?
Ok let me get this straight:
You have clockworkmod installed. Can you boot into it and do the buttons work?
Are you getting a garbled screen when you boot into the rom? Or are you just trying to unroot?
The tricky part is to avoid the bootloops of death.
sent from my cyanogen(mod) vision
Honestly what i would do if i were you, assuming i understood correctly that you can get into clockworkmod, just reflash the prime rom you didnt like(after wiping everything, including cache and dalvik), and if it boots and everythings okay, at least you know nothings really wrong with ur tablet. As for the plug in situation, make sure your battery isnt simply dead. As far as i know, it wont charge from recovery, so if uve been stuck without a booting rom for a while, it being dead could definitely be possible. Once you are in a working rom and you sorted out the charging issue, then you should worry about getting back to stock.
Thank you camaros,
I am able to load stock ROM successfully.
Battery is not dead as it is fully charged, and will run un tethered after powerup. I will test resetting it although I doubt that is causing it.
What i would like to determine is, is this related to a hardware or software issue?
Also, is there a way to restore stock recovery from CWM?
So here's my story. I rooted my transformer (rooted with razorclaw and CWM recovery, had no problems) and I wanted to update the firmware, sooo. I followed some walk through on unrooting by downloading the stock recovery and stock rom to my sdcard then unzipping them and loading them with CWM recovery. I let it boot and rebooted to load in the stock rom. Then I rebooted and loaded the stock recovery and rebooted again. And now it wont start up past the "Asus Eee pad Transformer" screen and just stays on it. I can get into part of stock recovery and wipe data and cold boot linux. But when I try to get into the other half of recovery options it just does the little robot unpacking the stuff then I get a triangle with an exclamation mark saying it failed to load. I tried using NVflash with the prime v1.4 ROM and failed. The starting S/N is B90 so that's why I figured NVflash didn't work...Because I have V2 SBK not V1. I can go into APX mode but it's getting really frustrating, WHAT CAN I DO??
I don't think you were supposed to unzip those files. Those are CWM flashable zip files
baseballfanz said:
I don't think you were supposed to unzip those files. Those are CWM flashable zip files
Click to expand...
Click to collapse
I actually dont think I did unzip them so ignore that...I used this method at the unlockr
-theunlockr[dot]com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
Yeah cause i was thinking if you did unzip it wouldn't flash anyway.
How long does is sit at the asus screen?
Sent from my Transformer TF101 using Tapatalk
forever until it dies, I can only get partially into recovery like I mentioned. Also when it charges it just shows that screen too(had to charge it cuz I got so frustrated I just left it and it ended up dying).
Please someone help, I have no idea how to flash a rom to my Device without NVflash. Is there some other program I could try that would work? I basically just need to flash a rom onto my device then I can try installing stock recovery again
Long shot but maybe try this, it's what peoples are doing to downgrade. Hopefully the recovery might pick it up after you reboot into recovery.
http://forum.xda-developers.com/showthread.php?p=20799328
I'll try this, but the download is taking forever...I'll have to update tomorrow thanks for your help
I tried in both the LOST.DIR folder and the main directory...the device didn't recognize it. I don't know what to do
Is there any other way to flash a rom on my transformer besides NVflash? or any other method? I'm up for anything now...does anything think if I sent it in to company they could do a restore?
The company could do a restore, but they will probably charge you since you rooted. You could try, or you could lie, and say it goobered after installing the update.
Hello,
I need some help to get the new ICS update. I have a TF101 (no G), serial B80, with firmware HTK75.WW_epad-8.6.6.23.
Previously I was on 8.6.6.19 and used razorclaw to root it. Then I have done the wipe data, and installed 8.6.6.23.
When I boot with Power and Vol- then Vol+ to enter RCK mode I get the green android guy with exclamation mark.
When I boot with Power and Vol-, then Vol+ I get 2 options: Wipe data and android cold boot.
I used some apps to test if the device is root and they say no.
Sorry for my english, but it's not my main language.
Any idea to fix this?
The 8.6.6.23 is firmware for the 3G model. You will not see OTA since ICS is not released for G model yet.
You can try to manually install 8.5.6.21. You could also try rooting and installing cwm recovery and flash the ICS ROM
Thanks for the answer. I've searched around and it seems that I can't get back to 8.5.6.21.
When I try to install it I get the android guy with exclamation point.
I guess I have to wait for ICS on 3G model
mantorrix said:
Thanks for the answer. I've searched around and it seems that I can't get back to 8.5.6.21.
When I try to install it I get the android guy with exclamation point.
I guess I have to wait for ICS on 3G model
Click to expand...
Click to collapse
Easiest way is to root, install CWM recovery and flash an ICS ROM. Either the stock rooted ROM or one of the many custom ROMs
I was in a similar situation. The ASUS recovery did not work for me either and I couldn't figure out how to install CWM. There is not a lot of help for noobs with B80s and with all the methods out there it was a challenge to find the correct one. Here's what I did:
1. If you are not rooted, follow the instructions in http://forum.xda-developers.com/showthread.php?t=1427838 to get rooted. I had updated to the .21 firmware, and at that point, the nachoroot method is the only option. I had some trouble connecting ADB, but eventually I got it to work. This was the most difficult part of the process.
2. Install CWM. I was having trouble with this using the ASUS recovery, and I think it has to do with B80 models. I found the app in this thread http://forum.xda-developers.com/showthread.php?t=1346180 and it is amazing. If you are rooted, it installs CWM even on the B80 versions. The custom recovery will allow you to install any rom.
3. Download the option B ROM from http://forum.xda-developers.com/showthread.php?t=1514658. Place the zip on your SD card. This rom is the ASUS stock ICS firmware with root. Contrary to what some have said--I noticed a huge difference with ICS!
3. Backup all your user apps and data with Titanium Backup (optional). Do not back up system data, just user apps if you want to keep them.
4. Open your recovery. Shut the tablet off, and boot into recovery by holding down the power button and the volume down button until you are prompted to boot into recovery by pressing volume up. Pressing volume up should load CWM.
5. Wipe and then install! To wipe, select "wipe" on the recovery menu. Then wipe all data, cache, and dalvik-cache. To install, select install zip from SD card and find the zip file you downloaded in step 3.
Best of luck!
Hi,
may i hook in here, i've got a similar problem:
i TRY to get in adb mode, but it doesn't work as expected:
i used this thread initially (ASUS Transformer Root ToolKit V7.1 Universal (Windows) | 2011-09-22), i downloaded the toolkit, connected my turned off tab to the pc, booted via Power + vol up, it got connected to windows and i installed the drivers. so far so good. BUT: if i start adb server and use adb device, i dont get any devices listed... i cant do anything. And when i use this nvflash method with the download.bat file, i get an error and the usb connection vanishes... i dont have any further ideas what to do. but i can boot afterwards normaly to 3.2.1, though i dont get any updates
any hints? Thanks for reading anyways
thanks, DK
[edit] i have the version HTK75.DE_epad-8.6.5.21-20111216 installed [/edit]
DreadKing said:
Hi,
may i hook in here, i've got a similar problem:
i TRY to get in adb mode, but it doesn't work as expected:
i used this thread initially (ASUS Transformer Root ToolKit V7.1 Universal (Windows) | 2011-09-22), i downloaded the toolkit, connected my turned off tab to the pc, booted via Power + vol up, it got connected to windows and i installed the drivers. so far so good. BUT: if i start adb server and use adb device, i dont get any devices listed... i cant do anything. And when i use this nvflash method with the download.bat file, i get an error and the usb connection vanishes... i dont have any further ideas what to do. but i can boot afterwards normaly to 3.2.1, though i dont get any updates
any hints? Thanks for reading anyways
thanks, DK
[edit] i have the version HTK75.DE_epad-8.6.5.21-20111216 installed [/edit]
Click to expand...
Click to collapse
What you did was put your tablet into APX mode. That's only good if you're doing NVFLash not ADB.
To use ADB just have yourtablet on like normal with USB debugging turn on
Hi,
thanks for your fast reply, you are right. i got my adb device id when beeing in the os, so this works. but, trying to use nvflash/Brk's Asus TF RootKit over apx, i got the initial connection, but when i want to flash it looses the connection or dies or something... no idea what
you got any hints how i can come back to a clean version, which is upgradable?
thx & best regards,
dk
this is the program output btw:
Creating backup of current boot and recovery img
this should take some time... please wait
Loading Bootloader to pad... please wait!
Starting...
Error! Could not load bootloader.
Click to expand...
Click to collapse
alexlarson011 said:
I was in a similar situation. The ASUS recovery did not work for me either and I couldn't figure out how to install CWM. There is not a lot of help for noobs with B80s and with all the methods out there it was a challenge to find the correct one. Here's what I did:
1. If you are not rooted, follow the instructions in http://forum.xda-developers.com/showthread.php?t=1427838 to get rooted. I had updated to the .21 firmware, and at that point, the nachoroot method is the only option. I had some trouble connecting ADB, but eventually I got it to work. This was the most difficult part of the process.
2. Install CWM. I was having trouble with this using the ASUS recovery, and I think it has to do with B80 models. I found the app in this thread http://forum.xda-developers.com/showthread.php?t=1346180 and it is amazing. If you are rooted, it installs CWM even on the B80 versions. The custom recovery will allow you to install any rom.
3. Download the option B ROM from http://forum.xda-developers.com/showthread.php?t=1514658. Place the zip on your SD card. This rom is the ASUS stock ICS firmware with root. Contrary to what some have said--I noticed a huge difference with ICS!
3. Backup all your user apps and data with Titanium Backup (optional). Do not back up system data, just user apps if you want to keep them.
4. Open your recovery. Shut the tablet off, and boot into recovery by holding down the power button and the volume down button until you are prompted to boot into recovery by pressing volume up. Pressing volume up should load CWM.
5. Wipe and then install! To wipe, select "wipe" on the recovery menu. Then wipe all data, cache, and dalvik-cache. To install, select install zip from SD card and find the zip file you downloaded in step 3.
Best of luck!
Click to expand...
Click to collapse
Thanks! This worked for me. Thank you sir! Everything worked fine and I'm now on ICS!
followed exactly alexlarson011's instruction and voila - it works! thanks a lot!
best regards
-dk
Just picked up a TF101 and it had the Cryo (whatever it is called) OS with ClockworkMod Recovery v5.8.3.4. The OS didn't pick up wifi on the apps but it is on and logged into the router so I did a reset. Once I reset the TF101, i am stuck at CWM. It won't boot into any OS or anything else. I tried almost everything I found googling (this site and others) but nothing works. I did, however, got the TF drivers for my laptop so I can connect to it but I can't get the USB debug option on (of course).
So what are my options? how do I "unbrick" this thing? is this what some people call it soft-brick as it does boot but there just isn't any OS in there? I tried to put the OS zip file from Asus on a MicroSD but when I went to install zip from sdcard, it i can't get to the microSD to install it. it doesn't find it at all.
what can I do? what are the steps in unbricking this thing? I got this for my dad for father's day (chinese father's day which is TODAY...) and would like to get it to him.
Thanks in advance!
Is it in a CWM boot loop? Meaning when you reboot the tablet it keep going back to CWM?
Try this to see if you can boot OS.
Turn off tablet
Push and hold Vol down plus Power button
Wait till you see a screen that give you two options
Wipe data or Cold boot Linux
Choose Cold boot to boot into OS.
baseballfanz said:
Is it in a CWM boot loop? Meaning when you reboot the tablet it keep going back to CWM?
Try this to see if you can boot OS.
Turn off tablet
Push and hold Vol down plus Power button
Wait till you see a screen that give you two options
Wipe data or Cold boot Linux
Choose Cold boot to boot into OS.
Click to expand...
Click to collapse
still stuck in CWM. I held it down and no options came up except to push vol +. tried both and regardless of what i do, it just goes right back into the CWM menu. it seems there's no OS to this tablet anymore?
Is there something I can do via USB cable to flash a ROM in there?
chivas228 said:
still stuck in CWM. I held it down and no options came up except to push vol +. tried both and regardless of what i do, it just goes right back into the CWM menu. it seems there's no OS to this tablet anymore?
Is there something I can do via USB cable to flash a ROM in there?
Click to expand...
Click to collapse
If you have ADB working, you can push a ROM file to internal memory and flash it.
Alternatively you can NVFlash a compatible ROM.
baseballfanz said:
If you have ADB working, you can push a ROM file to internal memory and flash it.
Alternatively you can NVFlash a compatible ROM.
Click to expand...
Click to collapse
Sorry to sound ignorant but what's ad and what command (extra code after the .exe) do I add afterwards?
I'd try to flash a ROM via NVFLASH.
You may download it from here, but you must know if your TF101 is WW version, US version or any other. You must also know if your device is SBK1 or SBK2. That depends on the serial number. For example, mine starts by B50 and it's SBK1. If yours is SBK2 then you'll have to take a look at wheelie. If not, take a look here.
http://forum.xda-developers.com/showthread.php?t=1620758
However, I'm not responsible for any damage your device might suffer.
Take a look at that and tell me
here's the endall- easyflash version 0.8.3b whitekidneys just updated it and saved my brick. it'll save yours too. just install it on your computer, along with naked drivers 0.7, put the tf in apx, and flash. literally that easy.
Follow the link to easy flash / nvflash and follow the steps...
http://forum.xda-developers.com/showthread.php?p=26893961
Sent from my Transformer TF101 using xda app-developers app
i'm getting the CWM bootloop too, but i can do what was mentioned and get into the OS although it still boots into CWM on the next reboot. what can i do to fix the bootloop? not really fancying reinstalling yet again. but if i have to...
thefunkygibbon said:
i'm getting the CWM bootloop too, but i can do what was mentioned and get into the OS although it still boots into CWM on the next reboot. what can i do to fix the bootloop? not really fancying reinstalling yet again. but if i have to...
Click to expand...
Click to collapse
Try Install different recovery... download and flash the new recovery through CWM..
Sent from my Transformer TF101 using xda app-developers app
I was using my transformer for about 6 months and decided to take it to the next level and root it. so all went well and i got it rooted and then decided to add a custom rom. Now keep in mind I am a major NOOB. So i install rom manager from the play store and follow a video guide to put a jellybean rom on it. So i follow it and i crewed up somewhere. but now it just gets stuck at the boot logo. when i try to go into clockword mod recovery it works but fails to mount anything. When i try to wipe it just gets stuck and stays that way intil its have to force it to power off (trust me it not gonna do anything at the wipe screen i left it trying for an hour and nothing happened). So now im stuck with this broken transformer thats not able to do anything
ROM Manager does NOT work for the TF101.
Use EasyFlasher to flash CWM or TWRP using APX mode.