[ROM][CM9][CM10.1][MONTHLIES/NIGHTLIES] Cyanogenmod 9 and Cyanogenmod 10.1 - Optimus One, P500 Original Android Development

Cyanogenmod 9, Android ICS 4.0.4, CAF Kernel and CM10.1 Jellybean 4.2.1
Started again on providing CM9 Monthlies and CM10.1 Nightlies!
Downloads will go here:
http://download.multipleandroidcoding.net/
Thanks:
Pasquale Lodise (lupohirp) for initial setup
Adam Farden (adfad666) for tests
HepHappy for his additional work.
Rashed for his work.
Code Aurora Forum for kernel
Cyanogenmod team and Android for ICS
Hcweb for offering bandwidth
Pilson66 for offering bandwidth
The nightlies are provided by Team MAC
New downloadlocations will be added later.
Disclaimer:
All builds are provided as is.
In any build things may be broke, not function properly.
For stable builds use roms from Rashed97.

Download
ICS 4.0.4 (New Baseband only)
New downloadlocations will be made public here.
Google Apps
gapps-ics-20120429-signed.zip
Prerequisites
Back up your contents of the sd card to PC
Root your phone
Install a recovery (Amonra or CMW)
Hold down VOL DOWN + HOME + POWER keys to enter recovery
Partition sdcard: swap-size: 64MB, Ext2-size: 300MB, Continue partitioning, SD:ext2 to ext3
Enable USB-MS toggle: Copy ROM.zip and GAPPS.zip
Wait 1 minute after copies completed (mandatory)
Disable USB-MS
Skip to the Installation section
Installation
Hold down VOL DOWN + HOME + POWER keys to enter recovery
Make a nandroid back up
Make full wipe (except wipe sd) for the first time installation
Flash from ZIP: Select ROM and reboot
Flash GAPPS and reboot
Install LINK2SD from GPlay, select ext3 and reboot.
Open Link2SD: Select AutoLink from Preferences.
Have fun!
Recommandations
PERFORMANCE: Memory Management: zRAm: 10%, KSM: enable
DEVELOPER OPTIONS: Window animation scale: off, Transition animation scale: off
ABOUT PHONE: CM Stats, Enable reporting: off
Bug Reports
Please use the issue tracker here.
Discussion
For rom-discussion go here.

Changelog
CHANGELOG
All full changelog can be found here

otrazhenye said:
Usb Mass storage not working
Click to expand...
Click to collapse
Is USB Debugging enabled or disabled ?

otrazhenye said:
Usb Mass storage not working
Click to expand...
Click to collapse
Works here in Ubuntu, but will check if it does on Windows

DJoptimus-One said:
Is USB Debugging enabled or disabled ?
Click to expand...
Click to collapse
I tried it with USB Debugging enabled and USB Debugging disabled. USB Debugging is working. Usb Mass storage not working

It's not only me. A lot of work is done by Lupo, hephappy and Adam!
Sent from my LG-P500 using xda premium

Hey Arjen,
As i understand, we dont have omx compatible with ICS however can we use old omx libs with our rom. There are only two functions in surfacefliger which are breaking the old omx compatibility. Hence now the idea is for work around is build a ics compatible surfacefliger that will override these two functions, actually the old libs are getting loaded
Regards,
Kanad

suzhipack said:
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
what is the meaning of this?
Click to expand...
Click to collapse
Well, too many users are downloading
Adding more downloadlocations soon.
Sent from my LG-P500 using xda premium

Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
https://www.dropbox.com/sh/1jqhuz9j6cf0ic5/5kDorKavl7
And on the other link.
https://romtracker.com/rom/4
Which one is the ROM?
9 Files.
:S ?¡?¡

Droid-21 said:
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
https://www.dropbox.com/sh/1jqhuz9j6cf0ic5/5kDorKavl7
And on the other link.
https://romtracker.com/rom/4
Which one is the ROM?
9 Files.
:S ?¡?¡
Click to expand...
Click to collapse
all the files except *.md5sum are roms... build dates are mentioned in the filenames...
so download the latest one (2012-05-23)

Can't seem to download the ROM...
Dropbox link is dead and Rom Tracker won't open

RomTracker is backup.
Update:
Found the bug, it was the max clients on the webserver where to small. Now its suppose not to timeout. I will keep and eye on the whole day, to make sure its up and running.
YashBhatt said:
Can't seem to download the ROM...
Dropbox link is dead and Rom Tracker won't open
Click to expand...
Click to collapse

Keep Up the Good/Great/Awesome work mate.. This thread came just when i had lost all hope.

More downloadlocations are being worked on.
Sent from my LG-P500 using xda premium

Will that ROM have kernel with multitouch fix and 100% CPU load on touch fix?

Did is progress with openmax?

darkmatthew said:
Did is progress with openmax?
Click to expand...
Click to collapse
no progress, arjen has started this thread for polishing it up to the max this side of openmax drivers or who knows, we might be in for a surprise

The new openmax turned out not to be working. So we got no progress there. Probably never will. Old openmax doesn't support some needed functions, so no solutions from there either.
Sent from my LG-P500 using xda premium

otrazhenye said:
I tried it with USB Debugging enabled and USB Debugging disabled. USB Debugging is working. Usb Mass storage not working
Click to expand...
Click to collapse
There is a way around this, plug the usb in, then disable and re-enable USB Debugging, works everytime. A little tedious, but for getting ICS on this little phone, so worth it.
Great job guys!!

Related

[ROM/WIP][Unofficial] CyanogenMod 9 for TF101

CyanogenMod 9 for TF101, compiled by daxtsu and whitekidney, device and vendor trees authored by the kind folks over at http://androidroot.mobi/ . We did not program CM9, or the vendor/device trees for the TF101. We're standing on the shoulders of giants here. However, we're going to try and improve certain things as time goes on, so hopefully we can contribute to it.
Build date: 25th Feb 2012
System:
Cyanogenmod 9.0.0-RC0-tf101-KANG IML74K
Stock Kernel(2.6.39.4-00002-g2977a0d, [email protected]#1)
Android 4.0.3
Click to expand...
Click to collapse
Features:
Latest superuser & busybox
Pure CM9, no custom apps or wallpapers
Stock Kernel(2.6.39.4-00002-g2977a0d, [email protected]#1)
No bloatware from ASUS
Click to expand...
Click to collapse
Working hardware:
GPS
Bluetooth(tether not tested, it should work)
WiFi
3D acceleration
HW video acceleration
MicroSD(with a minor fix, see below)
Keyboard Dock(with minor bugs, see below)
USB ports on dock
Camera, both front and rear, and panarama mode doesn't hang
Click to expand...
Click to collapse
Bugs:
MicroSD/USB sticks won't mount automatically without a small fix on first boot. We're working on a better fix.
Face unlock is enabled, but fails when trying to unlock(requires entering PIN).
Logcat of faceunlock: E/LockPatternKeyguardView( 167): Layout does not have faceLockAreaView and FaceLock is enabled
Onscreen touch keyboard pops up when docked, when tapping text boxes.
GPS might be slow to lock(it is for me).
Reboot to Recovery menu option doesn't work yet.
Dock battery level not detected
When plugged into a PC via USB, it shows it's charging, when it's really not.
Click to expand...
Click to collapse
Minor dock bugs:
The following soft keys do NOT work as of yet:
Wifi, bluetooth, trackpad/touchpad, brightness down, brightness up, auto brightness, camera, settings, mute
The following hotkeys DO work:
browser, media playlist back, play/pause media, media playlist forward, volume down, volume up, lock
Click to expand...
Click to collapse
Install instructions:
1. Download the cm9 zip.
2. Cache/Dalvik wipe recommended.
3. Flash it via CWM or Rogue XM.
4. Flash google apps.
5. Reboot into CM9 and enjoy ICS!
Click to expand...
Click to collapse
Download:
ROM
CRC32: CF79A449
MD5: CDD4A310E79AFD3413FFB8E6CF3D673B
SHA-1: BCDB0918924FBC09C0337D017E04384C6CAB6DC8
Link: http://open.ge.tt/1/files/94oHK8E/0/blob?download
Mirror: http://dl.dropbox.com/u/31118/update-cm-9.0.0-RC0-tf101-KANG-signed.zip
GAPPS
CRC32: A92554D1
MD5: 11B5763810EDB732379D39B6DF9CCBCF
SHA-1: A37DC9E46FBF64BBD5986E99AA435F44780CB1D4
Link: http://goo-inside.me/gapps/gapps-ics-20120224-signed.zip
Mirror: http://open.ge.tt/1/files/5yV0P8E/0/blob?noinc=1&download
Short Link: http://tinyw.in/GFPi
Click to expand...
Click to collapse
Fix for MicroSD mount(for ADB):
adb shell
su
mkdir /Removable/MicroSD
mkdir /Removable/SD
mkdir /Removable/USBdisk1
mkdir /Removable/USBdisk2
Or open a terminal emulator app:
su
mkdir /Removable/MicroSD
mkdir /Removable/SD
mkdir /Removable/USBdisk1
mkdir /Removable/USBdisk2
then insert SD/MicroSD/USB stick again, it is now mounted at the proper location.
The source for AndroidRoot's vendor and device trees is located at https://github.com/AndroidRoot/
And the source code for CM9 is at https://github.com/CyanogenMod .
WK and I will probably open up our own github at some point as well, but for now, we haven't modified anything in the source, so there's nothing to share in that regard. Much like my last rom, we're building this ROM for the learning experience, so feedback is always welcome, but please keep "Thanks!" only posts out of this thread, that's what the thanks button is for. However, if you have additional comments to go after it, like "Thanks, but I have an issue, like blah blah blah...", that's fine. Thank you.
Pictures
Click to expand...
Click to collapse
http://i.imgur.com/e1IXh.png
Note: Apps and widgets do not come preinstalled
Click to expand...
Click to collapse
Changelog
RC1:
First build
Click to expand...
Click to collapse
Known Issues
GPS might initialize slow
Minor dock issues
SDcard, USBdisk and SDreader on dock does not automatically mount, we believe we have found a fix, will be in next build.
Charging icon appears when you are plugged in via USB
Click to expand...
Click to collapse
Very impressive. Massive props to the OP. But I won't be flashing these yet, since I'm waiting for a friend of mine to get back from vacation. And we're gonna flash both of our TFs !
p.s.: I'm Mreich in the irc
p.p.s.: It would be nice if you guys could implement 3G dongles support
I'll flash.
Sent from my Transformer TF101 using XDA Premium App
THnx for this. Me too. What's the fix for the SD to show. Add the folder in removemavble.
dangambino said:
THnx for this. Me too. What's the fix for the SD to show. Add the folder in removemavble.
Click to expand...
Click to collapse
Yeah. Like the first post says, make a folder named MicroSD in /Removable. It requires root, so use ES File Explorer(or other root explorer), ADB, or Terminal Emulator to do it. Any of those should work. Then just insert your microsd again.
What is the weather/clock widget in the picture on the second post??
Reboot to recovery isn't working, just reboots normally.
bigjkcfan said:
What is the weather/clock widget in the picture on the second post??
Click to expand...
Click to collapse
According to wk, it's HD widgets. He made the screenshots.
dohclude said:
Reboot to recovery isn't working, just reboots normally.
Click to expand...
Click to collapse
I forgot to add that to the list of bugs. Thanks for reminding me. It shouldn't be too hard to fix.
Sweet, thanks for you hard work.
Sent from my Transformer TF101 using xda premium
Great work. I'll test it and post feedback.
Thanks.
So this is not by CM its made from the source of CM9...?.?
Also how much in the performance menu works? and is there any speed improvements so far (I'm asking because its the first build and you may have some work to do ) I guess the extra 300-400 pts in Quadrant show some improvement so far, I bet it will get up to 3000 xD lulz!!
Thanks for the support and development , prob gunna flash this soon!!
Are you sure that wifi works, it can find networks, but it won't connect to them
So excited seeing CM9 on the TF101. Can't wait to test it out.
LaseOfFury said:
So this is not by CM its made from the source of CM9...?.?
Also how much in the performance menu works? and is there any speed improvements so far (I'm asking because its the first build and you may have some work to do ) I guess the extra 300-400 pts in Quadrant show some improvement so far, I bet it will get up to 3000 xD lulz!!
Thanks for the support and development , prob gunna flash this soon!!
Click to expand...
Click to collapse
Yes, we compiled it from the latest(as of the time of compiling) CM9 source code. WK and I aren't affiliated with the CM team in any way.
bubb18 said:
Are you sure that wifi works, it can find networks, but it won't connect to them
Click to expand...
Click to collapse
Even if it's an open network? If it's secured with WEP/WPA, I hate to state the obvious, but make sure you're entering your password correctly.
LaseOfFury said:
So this is not by CM its made from the source of CM9...?.?
Also how much in the performance menu works? and is there any speed improvements so far (I'm asking because its the first build and you may have some work to do ) I guess the extra 300-400 pts in Quadrant show some improvement so far, I bet it will get up to 3000 xD lulz!!
Thanks for the support and development , prob gunna flash this soon!!
Click to expand...
Click to collapse
This is CM9 built from Cyanogenmods sources, not an official build.
I've been using the build for a few hours now and I can easily say it's a little bit smoother.
We hope that ASUS drops the kernel sources soon so that we can get kernels which allows us to overclock, so that we can stretch the quadrant bar even further!
bubb18 said:
Are you sure that wifi works, it can find networks, but it won't connect to them
Click to expand...
Click to collapse
Are you sure? WiFi works perfect here.
Now some stuff that comes with ASUS i like... like Supernote, File Manager is pretty good, Polaris Office, App Locker, and MyNet and MyCloud seem good... Is that all removed (i know you said removed bloatware but did you mean all that came with it?)
This is awesome, Thanks again!!!!!
None of it is in the CM9 source, so no, it's not there. We're going to upload the ASUS apps eventually for your use, but for now it's the bare minimum.
OK then, CM9 has been flashed and is up and running.
1st thing I see after I run the SD card tweak, my battery icon is showing as charging while plugged in to the USB. I just gotta say ME LIKEY!
So far so good folks, big thanks to you all and I'll keep you posted
LaseOfFury said:
Now some stuff that comes with ASUS i like... like Supernote, File Manager is pretty good, Polaris Office, App Locker, and MyNet and MyCloud seem good... Is that all removed (i know you said removed bloatware but did you mean all that came with it?)
This is awesome, Thanks again!!!!!
Click to expand...
Click to collapse
I'll make ASUS flashable .zips tommorow.

[JB+][3.0.8/2.6.32 kernel] CM10.1 Android 4.2.2 for the Defy(+)

Android 4.2.2 Jellybean for Defy and Defy+
Mirrors: http://www.uncledan.it/android-files/CM10.1/
Gapps: http://goo.im/gapps
Experimental builds with 3.0.8 kernel:
Not for daily usage!
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/!!!experimental!!!/
Works: SD-Card, Bluetooth, Torch, Leds, USB all modes, HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
Not work: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
Known problems: Low speed of USB Mass-storage, Display not always wake after sleep, Suspend not work correctly.
Builds on stable 2.6.32 kernel:
Download Link: http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/
Mirror: http://d-h.st/users/Quarx/?fld_id=14052#files
Problems/TODO:
1. BT-headset has problems.
2 .BT will not work, if FM is enabled.
3. Video recording is not good.
4. Memory leak after some days.
5. Delay on wakeup.
09.04.13: Suspend optimizations.
13.04.13: Fix BT, add Volume Rocker Wake Support and Expanded Desktop preference. 5Ghz WiFi (not tested)
15.04.13: Fix FM-Radio, Add pie controls, TWRP recovery..
11.05.13 Updated USB-Gadget to native for 4.x, fix mtp/ptp/storage/tethering. Removed usb.apk/usbd. Many minor fixes..
16.05.13 Very experimental build, contain a lot of updates from kernels 2.6.33 - 3.1. Increased performance, added swap. Memory management updated to 2.6.39(3.0) state. Some parts updated to 3.1. Blechd0se patches for interactive gov.
07.06.13 Fix 2g/3g data (thanks to Kayant for finding the right way to resolve problem). More safe mount options (should fix problems of random bootloops). Fix Google Messaging service (thanks to ccav2000)
16.06.13 Updated wifi driver & wpa_supplicant, fix bt-tether by @dh.harald. Improvement in interactive governor by @Blechd0se. Updated kernel with some patches from upstream.
09.07.13 Stability fixes. Updated bootmenu. This build not contain ZCache/Zram/Swap. Who want use ZRAM and other experimental features, can install @Blechd0se's kernel
F.A.Q
Coming from CM 10
Do we need to wipe data to update the CM10 build to CM10.1?
Edit: I will try it, btw. thanks Quarx for the awesome work
GUYS u must flash gapps , if u want to go past the setup during first boot
Fire Head said:
Do we need to wipe data to update the CM10 build to CM10.1?
Click to expand...
Click to collapse
Remember that it's not ready for daily use. Nearly everything doesn't work. You have to wipe everything in order to make it boot. And of course, flash gapps too.
how to get pass , the first boot setup ,
the gapps provided is too large for defy's data partition
so cant get specific needed files for setup , can any1 help ??
i still cant get pass the setup
Quarx, I recommend you to post this link to the OP:
FAQ thread for the new CM10.1!
http://forum.xda-developers.com/showthread.php?p=34616788
----
Guys, remember to hit the "newsworthy thread" button on the OP! The world needs to know this!
Okay, the excitement is understandable, but guys, can you keep this thread CLEAN? Express your gratitude with a donation and the Thanks button, not by flooding the thread with delighted squeals. It's development after all.
I hope (in vain though) that this will be the last offtopic post.
Trimis de pe ASUS Transformer Pad TF300T
So for me, after PIN input, it shows "Unfortunately, the process com.google.process.gapps has stopped" and then "Unfortunately, Setup Wizard has stopped" message... and it stays like that even after i press OK! I can access notification bar, but no start screen!
What to do?
Gafanhotz said:
You have to wipe everything in order to make it boot.
Click to expand...
Click to collapse
Not really, installed it over CM10 (with the new GApps) and deleted cache (and dalvik cache). It works
Fire Head said:
Not really, installed it over CM10 and delete cache (and dalvik cache). It works
Click to expand...
Click to collapse
He said on Facebook to wipe data in order to make it work without major problems.
bone101 said:
No Sdcard here
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
That should be in his to do list don't worry. This is something beyond imaginary what we are going to experience. So thank him for what we have. You know about him. He will surely make it stable.
Sent from my MB526 using xda premium
Gafanhotz said:
Quarx, I recommend you to post this link to the OP:
FAQ thread for the new CM10.1!
http://forum.xda-developers.com/showthread.php?p=34616788
----
Guys, remember to hit the "newsworthy thread" button on the OP! The world needs to know this!
Click to expand...
Click to collapse
Can't find that button..maybe it is not available in tapatalk but only in Web visualization?
Hope this thread will be cleaner than 4.1.2 one..guys for support please use faq thread!
System Wizard stopped fixed
After installing CM10.1 with gapps you can't bypass Setup Wizard stopped. How bypass this error: 1.wipe all data 2.install CM10.1 nightly 3.Wipe all data 4.boot in 4.2, it will boot without errors. 5.Install your needed google apps from market. Error caused by gapps (I think its because low space in ROM - installing CM10.1 without gapps i getted only about 15mb free), so if we want to use future ROMS (4.3 - CM11 or CM10.3) we need to resize SystemROM, to resize SROM - we need unlock bootloader, to bypass bl - TI Board Conf tool & 16MB.bin or some future way )
can i install for Defy green lans ??
slon11 said:
can i install for Defy green lans ??
Click to expand...
Click to collapse
Its for Defy and Defy +.
Since we have custom kernel, every build is for both phones, regardless the lenses
Sent from my Balls of Steel
Can someone make audiofix flashable from cwm as temporary solution ? Beside this rom speed is very good
Audio fix CWM flashable ZIP
I made CWM flashable audio fix.
turffe said:
I made CWM flashable audio fix.
Click to expand...
Click to collapse
Yes thanks a lot,but how to mount sdcard to save download from Tapatalk ?
sebx_g1 said:
Yes thanks a lot,but how to mount sdcard to save download from Tapatalk ?
Click to expand...
Click to collapse
SD is mounted, but android is not seeing it as mounted.
Nothing you can do about it..
Sent from my Balls of Steel

[Nook HD] CM10.1 native EMMCNow part of CM nightliies

By popular demand, I am bringing to you CM10.1 that you can install into Nook's internal ROM.
Note, this version totally overwrites your ROM, so back up everything important before proceeding. This is not a dual-boot solution, you do loose B&N ROM for good after installing this.
This is work in progress, yadda yadda.
Follow this install guide substituting various filenames with filenames below if you don't understand the below instructions
Get nookhd-emmc-cwm.img.gz, gunzip and write it to an sdcard of at least 1G in size (all content on that card will be lost). (use dd under Linux and MacOS, use Win32DiskImager or similar tool under Windows, use 7zip under windows to unpack).
Download CWM recovery zip if you want internal recovery to be replaced with CM one (if you don't know what is it about, then you need it). As another option there's a graphical TWRP recovery available. (you can only have one recovery option)
Also download latest nightly from http://download.cyanogenmod.com/?device=hummingbird
You can write installation zips for recovery, cm binary + whatever else you need and transfer them to Nook user storage (if you have it activated and all), OR add all these files + whatever other packages you might need right away on to the sdcard.
Insert sdcard into Nook and reboot the Nook, next install recovery (if desired) and the cm10.1 binary and whatever else you put there.
Use Install zip from sdcard, if you copied installation zips to sdcard, otherwise use "choose zip from internal sdcard" - both options are in "Unstall update from zip file".
Erase /data (only on initial install, this is important to avoid crashes on bootup! Naturally, make sure you have copies of whatever important info from there before you remove).
Remove the sdcard from the Nook. You might need to use this sdcard for your recovery needs in the future should EMMC content become badly damaged, so probably a good idea to have a copy of it somewhere.
Congrats, now on reboot you'll get into cm10.1 on your Nook HD.
When you need to get into recovery, you can either do "reboot to recovery" in reboot menu (need to enable that in settings) or reboot the nook, and when you see original nook boot logo, press and hold power + home buttons for about 4 seconds.
If you plan to use USB Host feature, you will need a gender changer, as B&N decided not to release a special cable so far. The control to enable USBHost is in quick settings panel (slide down in the top right corner of the screen to bring it up).
Known problems:
- Nook app reports incompatible in market (workaround1: just sideload it ; workaround2: change ro.product.device to nookhd in build.prop) - This is because they specifically blacklist Nooks! For workaround #2, revert the value back to hummingbird when done installing, otherwise you'll lose sound.
- Certain sdcards still remain unstable.
- Google Earth crashes when you press "my location" button, but works fine otherwise.
Changelog:
13/08/09 - We are part of official CM and latest nightly from here is what you should get now: http://download.cyanogenmod.com/?device=hummingbird
13/08/01 - cm-10.1-20130801-UNOFFICIAL-hummingbird-emmc.zip
- Data usage statistics should now work
13/07/19 - cm-10.1-20130719-UNOFFICIAL-hummingbird-emmc.zip (backup link)
- Update wifi drivers to R5.SP3.06
- Kernel with initial charger control for the charger app to work
- Picked some kernel fixes from omapzoom tree that I think would be useful for us too, this includes some voltage changes (decreases).
- Disabled hwui scissors optimization as it seems to be doing more harm than good.
13/07/11 - cm-10.1-20130712-UNOFFICIAL-hummingbird-emmc.zip (backup link)
- Added Apple keyboard support
- Updated to CM-10.1.2 for security fixes
13/07/10 - cm-10.1-20130710-UNOFFICIAL-hummingbird-emmc.zip
- Rebased on cm-10.1.1 for security fixes.
13/07/08 - cm-10.1-20130708-UNOFFICIAL-hummingbird-emmc.zip
- ExFAT and NTFS support from upstream
13/07/06 - cm-10.1-20130706-UNOFFICIAL-hummingbird-emmc.zip
- revert accidentally applies frequency bump patch that made it into 07/04
13/07/04 - cm-10.1-20130704-UNOFFICIAL-hummingbird-emmc.zip
- upgraded to fixed SGX DDK [email protected] (this fixes Google Earth, and a bunch of games)
13/07/03 - cm-10.1-20130703-UNOFFICIAL-hummingbird-emmc.zip
- usb ids changed to match stock
- swap support enabled
13/06/30 - cm-10.1-20130630-UNOFFICIAL-hummingbird-emmc.zip
- Serial number is now visible in Android
- usb audio now actually works (only for output)
13/06/29 - cm-10.1-20130629-UNOFFICIAL-hummingbird-emmc.zip
- Experimental kernel work
- enabled 1.5GHz freq by default
- in-kernel bluetooth
13/06/24 - cm-10.1-20130624-UNOFFICIAL-hummingbird-emmc.zip
- more kernel drivers for bt hid, usb 3g modems and gps devices
13/06/15 - cm-10.1-20130615-UNOFFICIAL-hummingbird-emmc.zip
- WiFi Direct and BT tethering are now working
- /sdcard now points to internal storage.
13/06/13 - cm-10.1-20130613-UNOFFICIAL-hummingbird-emmc.zip
- Boosted speaker and headset audio levels.
- gfx cash on startup fixed
- Zinio now works out of the box
13/06/12 - cm-10.1-20130612-UNOFFICIAL-hummingbird-emmc.zip
- Fixed HDMI audio
- Fixed HDMI video upside-down picture
- Added usb audio support
- Enabled tabbed view in Settings app.
13/06/10 - cm-10.1-20130611-UNOFFICIAL-hummingbird-emmc.zip
- Initial release
This is unrelated development to bokbokan's sdcard/hybrid install, because he does not make his source code available, so don't ask me to pick features from his build.
oh my god
finally, :laugh:
Works great.
Sent from my Nook HD running CM10.1 on emmc.
Sweet!!!!!!
Will test it out.
I guess this means we will have access to a working repo soon so we all can start building from source.
dubidu said:
I guess this means we will have access to a working repo soon so we all can start building from source.
Click to expand...
Click to collapse
https://github.com/verygreen/android_device_bn_hummingbird
verygreen said:
https://github.com/verygreen/android_device_bn_hummingbird
Click to expand...
Click to collapse
Txs
Woohoo! Fantastic work! And thank you so much for posting source.
New binary release: cm-10.1-20130612-UNOFFICIAL-hummingbird-emmc.zip
Changes:
- Fixed HDMI audio
- Fixed HDMI video upside-down picture
- Added usb audio support
- Enabled tabbed view in Settings app. (This seems to be looking ok, but if you find it's too bad, let me know and we certainly can try to roll it back or only have it for landscape or some other stuff).
Thank you!! :victory:
Running fantastic for me. Thanks.
AMAZING! I just wanted to cruise by the forums because I was bored with nothing new until I see this post! Awesome work is all I can say. Does this mean no more reboot restores with /system and complete control and customization of the device without the unlocked bootloader?
Haven't look at the code yet, but I believe if you change "ro.product.device" in "build.prop" you will loose all the sound.
Can someone test it?
Niiiiice! Thanks, been waiting on this.
Now, quick question: There is a stock ROM to flash, right? I just exchanged another HD & it was easy enough to just remove the SD card. I've only had this HD a week.
Thanks!
Oh yeah, I remember now: Yes, there is.
http://forum.xda-developers.com/showthread.php?t=2062613
LAYGO said:
Niiiiice! Thanks, been waiting on this.
Now, quick question: There is a stock ROM to flash, right? I just exchanged another HD & it was easy enough to just remove the SD card. I've only had this HD a week.
Thanks!
Click to expand...
Click to collapse
This is a ROM to replace the stock on emmc. You should back up your stock first. E.mote has an excellent tutorial that verygreen links in his OP here. Then you can restore that backup to get back to stock if you need to return it.
Edit: Guide is here. Just substitute the files from the OP instead of the ones listed in the guide:
http://forum.xda-developers.com/showthread.php?p=42399961
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
This is a ROM to replace the stock on emmc. You should back up your stock first. E.mote has an excellent tutorial that verygreen links in his OP here. Then you can restore that backup to get back to stock if you need to return it.
Edit: Guide is here. Just substitute the files from the OP instead of the ones listed in the guide:
http://forum.xda-developers.com/showthread.php?p=42399961
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I guess I wasn't clear in my question (too early). I just needed to know if there was a stock ROM to flash back to stock in case I had to return it. Of course, I could just Nandroid my stock install too (DUH, didn't think about that, just like you said).
Updating to latest ROM?
Folks,
I picked up a Nook HD+ 16Gb last night and followed the guide to install CM10.1. Everything went smoothly. A big THANK YOU to verygreen and lepinlar for all the work in creating this and the guides/instructions on how to install.
I've got a couple questions:
I installed the cm-10.1-20130608-UNOFFICIAL-ovation-emmc ROM and have made some changes on the tablet (added my daughters as Users, downloaded some apps, etc). How would I go about upgrading to the cm-10.1-20130612-UNOFFICIAL-hummingbird-emmc ROM? Would I lose the changes I've already made? Is there way to install/upgrade to the new ROM and keep the changes I've already made? Thanks.
Shenandoah
shenandoah2 said:
Folks,
I picked up a Nook HD+ 16Gb last night and followed the guide to install CM10.1. Everything went smoothly. A big THANK YOU to verygreen and lepinlar for all the work in creating this and the guides/instructions on how to install.
I've got a couple questions:
I installed the cm-10.1-20130608-UNOFFICIAL-ovation-emmc ROM and have made some changes on the tablet (added my daughters as Users, downloaded some apps, etc). How would I go about upgrading to the cm-10.1-20130612-UNOFFICIAL-hummingbird-emmc ROM? Would I lose the changes I've already made? Is there way to install/upgrade to the new ROM and keep the changes I've already made? Thanks.
Shenandoah
Click to expand...
Click to collapse
First you do not want to flash that ROM to your HD+. If you look at the filenames you will see ovation (which means HD+) and hummingbird (which means HD). But if you want to upgrade to a newer ovation ROM, just flash the newer ROM over the top of your old ROM. It will keep all your changes you've made.
Sent from my Nook HD+ running CM10.1 on emmc.
Lepinlar,
Sorry about the post. I didn't read it close enough to realize it was for the HD (not the HD+). Should I delete my original post so it doesn't confuse anyone else?
Shenandoah
shenandoah2 said:
Lepinlar,
Sorry about the post. I didn't read it close enough to realize it was for the HD (not the HD+). Should I delete my original post so it doesn't confuse anyone else?
Shenandoah
Click to expand...
Click to collapse
No, it might actually help others users who are confused by the issue. Leave it there as originally posted.
Sent from my Nook HD+ running CM10.1 on emmc.
Awesome ROM, thanks for doing this. Battery life vs stock is amazing, UI looks much better, more customizable, great having root to back up apps and etc.
I had a small issue with the 06/08 build on my HD+ where the battery would not recharge. Power cycling (turning it off and then on again) seemed to fix it. Is anyone seeing this issue with this 06/12 build? Thanks!

[ROM] CM-10.1 Unofficial [Mostly Official]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Your warranty is now void.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you
.
Although many things work, there is still a lot of things we need to work out and fix.
After we get everything working, then I will no longer be maintaining this thread. I will turn it over to anyone who wants it. Since I have so many other projects going on.
This thread is specifically targeted in fixing the issues.
Please prune and post your logcats to pastebin.com.
Please include what you did to recreate the issue at hand.
If you figure out a fix, please update us with exactly what you did.
Instructions
- Read known issues ans FAQs
- Copy GApps and CM10.1 ZIPs to your SDCard
- Boot into Recovery
- Wipe /cache, /system, /data, /dalvik
- Flash CM10.1 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Wipe data of clock app
- Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs
source code for the t769
I will update source code weekly with upstream. I will update fixed issues as they occur.
Special thanks to:
ktempleton
j3r3
The donators (Please PM so I can add your xda user name instead of your real names...lol)
jparnell8839
Download Links and Changelog/issue tracker
Gapps
For radio issues check post #31 (thanks jparnell8839 )
For now, the date will determine the build/version number (look at the date which are the numbers before "UNOFFICIAL")
Mostly Official cm-10.1-20130922-UNOFFICIAL-t769.zip
Camera fixed
userdebug added to build type
RC cm-10.1-20130903-UNOFFICIAL-t769.zip
Changelog:
With WiFi now working, we can move to a release candidate
RC build
Fixed WiFi
Fixed intermittent gallery crash
Initial WIP build (Release candidate)
cm-10.1-20130729-UNOFFICIAL-t769.zip
Fixed intermittent audio void
Fixed sdcard mounts
Fixed usb/otg connection (must go to system settings/storage, tap menu key, select usb computer connection and change it to mass storage)
Bug tracker:
WiFi signal intermittently low
Camera still not working
GPS doesn't seem to get a lock (someone please test)
Testers, please update me. I still need feedback on bluetooth, video, etc...
I am tracking that radio, data, calls, mms/sms are all working fine.
FIRST
Edit: YES AHAHHAHA.
xWolf13 said:
FIRST
Edit: YES AHAHHAHA.
Click to expand...
Click to collapse
Really? lol... Like little kids in a candy store...lmbo!
thomas.raines said:
Really? lol... Like little kids in a candy store...lmbo!
Click to expand...
Click to collapse
Yup ahaha. Been refreshing this whole dev section once you posted "lets move to this to the dev section".
Thanks Thomas (':
http://goo.im/gapps/gapps-jb-20130301-signed.zip
Link for gapps 4.2.2
Sent from my GT-N7100 using xda app-developers app
lol great, now I need to download the new build and get fresh logcats!
as always, if you need a mirror, my server is open not the fastest, my ISP wont let me go any higher than 5mb/s, but it's stable
I'll download and start testing the build
Sent from my GT-N7100 using xda app-developers app
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through your computer.. You confirm it and you can get the log.
jparnell8839 said:
Clean flash, ran Black Hole and FSC before flashing.
ok, so I'm still getting spotty connectivity for data, keeps dropping, same thing as before in my post >>>here<<<
Bluetooth worked until I enabled debug, then it did not. Gallery did NOT work, until I enabled debug, then it did. Camera still crashes gallery. Torch still crashes. I cant pull a logcat because adb keeps saying device is offline. I'll try a reboot, see if that helps once I get home
Click to expand...
Click to collapse
Thanks for the offer on the mirror... I have 2 sites I use, one main and one just in case...lol... But you are welcome to upload it and post the link... I'll include it in the dl section.
As for your issues, I'm tracking the camera/gallery issue and of course wifi. as for data, have you tried using a different radio? Torch is working fine for me. Try downloading/flashing again. Might have gotten a bad flash/download (doubtful, but let's try it). Also, has the log changed or is about the same?
for the logcat to work change the type of usb connection to camera. It worked for me.
theprogram1 said:
for the logcat to work change the type of usb connection to camera. It worked for me.
Click to expand...
Click to collapse
Go to System settings/About phone and tap Build number several times until it tells you that you are a developer. Then you will have developer options and can now enable adb debugging...
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
For those still getting device offline in adb. my n4 does this every time I switch between mine and my wife's. First make sure SDK is up to date. Secondly if it still does it. Tap the USB debugging option in developer options on and off again several times and the dialog box asking to accept the computer should come up. . Its not a for sure way to get it to work but this usually works for me.
Sent from my Nexus 4 using xda app-developers app
ktempleton said:
Hey Thomas there is a fix for the camera crash on gerrit
http://review.cyanogenmod.org/#/c/46310/
Its for 4.3 but should work with 4.2 same logic
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
The patch is already present... but I'm going to add it to the boardconfig.mk and see if it works...
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
ktempleton said:
I'm not sure if all of it was there but there were changes in the kernel and common folders as well as v media and display caf
They discuss them in detail here
http://forum.xda-developers.com/showthread.php?t=1798056
Sent from my SAMSUNG-SGH-I577 using xda premium
Click to expand...
Click to collapse
I got it in there... let's see if it works... tomorrow... I've screwed the phone up anyways, so I'm stuck trying to fix that for now...lol
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
aronianchici said:
10.1 comes out as soon as i switch to the Nexus 4! Haha, well great job raines, and all else who contributed. Proud of you guys.
Click to expand...
Click to collapse
Switched to a nexus 4 a few months back from the blaze. You will love the development section for it(;
Sent from my Nexus 4 using xda app-developers app

LineageOS 13.0 for Samsung Galaxy Core Plus

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
This is a UNOFFICIAL build of LineageOS for the Samsung Galaxy Core Plus.
It's not ready yet and has some bugs in it which could cause problems to some users.
The ROM will only work on the SM-G350 Version of the Phone (without any Numbers/Letters behind).
This ROM could be used for daily use now (though you should look at the list of what doesn't work first).
Known Bugs
Camera sometimes switches to green-purple. The resulting picture doesn't have the weird color, but it may be flipped and/or distorted at the edges.
Video Recording
Codecs (some work, some don't. I tested MP4 and AVI, both work. I should really make a list...)
Installation Instructions
Special thanks to @Giovix92 for making this tutorial!
Requirements:
1: A computer with Windows.
2: An Internet connection.
3: A backup of your phone data (contacts, photo, music, videos, and other).
4: About 300 MB free space on your SD card.
5: Phone charged at least 80%.
Download links are below
I do NOT take any responsibility for bricked devices!
Let's start!
1: Download the Samsung USB Drivers.
2: Download the ODIN3. (Only for Windows)
3: Download the TWRP Odin package to your desktop and download the LineageOS 13 zip to your SD card.
4: Make a backup of your files, because the storage will be wiped. (External SD card will not be wiped)
5: Reboot your phone in to the Download mode (Volume Down- , Home- and Power button). Press the Volume Up button when asked. Then open the ODIN3 and connect your phone to your PC.
6: Press AP and choose the TWRP Odin package (recovery.tar) and make sure re-partition is NOT ticked. "Auto-Reboot" should not be ticked either, otherwise you will need to be quick to boot into the recovery immediately after flashing.
7: Press start! Wait a few seconds. Then your phone will be rebooted. Now you can disconnect the cable and power off your phone.
8: Boot your phone in to the TWRP Recovery (Volume Up-, Home- and Power button).
9: Go to Wipe, and Swipe to Factory Reset.
10. After wiping go to the home screen by pressing the home button.
11: Go to Install. Choose the "external_sd" from the top bar. (It says "Storage: Internal Storage (xxxxMB)" by default)
12: Choose the LineageOS 13 ZIP and Swipe to Confirm Flash. Make sure you don't power off while flashing!
13: After the zip has been flashed choose "Reboot System".
14: Wait 5-15 minutes to boot the phone. If the phone keeps booting take out the battery and do a Factory Reset again.
15: When the phone boots the first time, go through the Setup Wizard and you are ready to use your phone!
If there was something you didn't understand, please don't hesitate to ask
Changelog
23-01-2021:
Security patches until April of 2019
Updated Chromium from 67.0.3396.87 to 87.0.4280.101
Disabled latinimegoogle (which is compiled against an incompatible instruction set and results in crashes)
Fix offline charging
Old Changelogs:
02-05-2019:
Include all security patches up to January 2019 (and most of February and March, except for the PNG vulnerability)
NFC
Fix up some of the codecs (h264 and ac3, which should enable you to watch most videos)
Remove Gello (the old, bloated Browser) in favour of Jelly
Using way less hacks than previously (again)
05-04-2018:
Include all security patches up to March 2018
SELinux is now enforcing
OTA Updates the third (now using the internal Updater)
Using way less hacks than previously
24-05-2017:
Now compile with newest toolchain (Commit)
Fix SD Card (Device commit, Kernel commit)
Removed PMEM from the kernel (as this saves some RAM) (Commit)
OTA Updates (Commit)
18-04-2017:
Switch to LineageOS
4 Months of Security Patches
10-04-2017:
Fixed GApps (through a modified WebView)
07-04-2017:
Fixed Network (Commit)
Enabled permissive SELinux (Patch, Commit)
10-10-2016:
Bringup
Downloads
Samsung USB Drivers
Odin v3.09
Odin v3.11.1
TWRP 3
TWRP 2.8.1.0
lineage-13.0-20210123-UNOFFICIAL-cs02.zip
Sources
Device tree
Kernel tree
Proprietary files
WebView
Thanks To/Credits
Thanks to ...
... androidlover5842, ishantvivek, SandPox, ZIM555 and everyone else working on Samsung's hawaii-Boards
... berkantkz and santeri3700 for teaching me the basics of ROM developing
First Version of CM 13 is up
First! Good rom man!
Inviato dal mio ASUS_Z00A utilizzando Tapatalk
Hey !
i was happy when i saw that cm13 was out for our galaxy core plus so now i'm downloading it. After i will flash it if you want i can be a beta tester.
Thanks for this rom !
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
I installed it and for me the bigest problem is the wifi.
gaetano76le said:
Hey !
i was happy when i saw that cm13 was out for our galaxy core plus so now i'm downloading it. After i will flash it if you want i can be a beta tester.
Thanks for this rom !
---------- Post added at 07:04 PM ---------- Previous post was at 06:42 PM ----------
I installed it and for me the bigest problem is the wifi.
Click to expand...
Click to collapse
Still working on that.
I just noticed that the sound sometimes "breaks" and sounds like damaged speakers (just for a part of a second, nothing permanent). I don't know if this is a software problem or just my phone. Can someone confirm that? It sometimes happens when doing a call or pressing random numbers at the Dialer. It also seems to happen only with standard sound level or higher.
I'll check it after I fixed (or tried to fix) Internet and SD Card
This is the same on stock when listening YT idk why it happens.
For the sdcard fix check if there are correct mounts for vold.fstab or framework
BTW. Videoplayback isnt working good on YT on Internet browser and is glitched too on chrome.
TimSchumi said:
I just noticed that the sound sometimes "breaks" and sounds like damaged speakers (just for a part of a second, nothing permanent). I don't know if this is a software problem or just my phone. Can someone confirm that? It sometimes happens when doing a call or pressing random numbers at the Dialer. It also seems to happen only with standard sound level or higher.
I'll check it after I fixed (or tried to fix) Internet and SD Card
Click to expand...
Click to collapse
bump
 @TimSchumi
http://forum.xda-developers.com/s7582/development/rom-cm13-0-galaxy-s-duos-2-trend-plus-t3307986
Maybe talk with this guys to allow to use their source? Will be easier to fix rom and you will can to support them too
So, any changes about the network?
QGM said:
bump
@TimSchumi
http://forum.xda-developers.com/s7582/development/rom-cm13-0-galaxy-s-duos-2-trend-plus-t3307986
Maybe talk with this guys to allow to use their source? Will be easier to fix rom and you will can to support them too
Click to expand...
Click to collapse
Thanks for searching :good:
I'll write to developer and ask for the fix!
john_sdr said:
So, any changes about the network?
Click to expand...
Click to collapse
Not now, still working on it. I don't even know where to search.
something about the vpn? or maybe something isnt compatible with cm13?
I searched on google and disable the firewall could be a solution.
john_sdr said:
something about the vpn? or maybe something isnt compatible with cm13?
Click to expand...
Click to collapse
Seems to be a more general problem. I'll look through the device/kernel/vendor trees of similiar devices for a fix.
SpYneX_ said:
I searched on google and disable the firewall could be a solution.
Click to expand...
Click to collapse
Could you test it?
TimSchumi said:
Seems to be a more general problem. I'll look through the device/kernel/vendor trees of similiar devices for a fix.
Could you test it?
Click to expand...
Click to collapse
How could you even disable a device's firewall?
Well, i just red here "https://forums.oneplus.net/threads/official-cm13-nightly-builds-rolling-out-for-opo.411202/page-103" that its may be fault of the recovery. I dont think that we all got the same twrp though, is something you can test? i used santori's twrp, i had it flashed quite a time. maybe an update or a modification will solve that issue
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Hey, I'm new here at xda forums. I just installed this ROM on my galaxy core plus, and it works great. My phone is now super snappy. But many features don't work as of now, the bluetooth actually worked for me, I didnt expect it to after reading the post. When will these bugs be fixed, and more importantly how can I follow so that I can get my hands on the new release as soon as it gets out? Thanks a lot!
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
john_sdr said:
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Click to expand...
Click to collapse
I also could try to make CM Recovery first, and if it won't work, I'll give TWRP a try.
Abiti7 said:
Hey, I'm new here at xda forums. I just installed this ROM on my galaxy core plus, and it works great. My phone is now super snappy. But many features don't work as of now, the bluetooth actually worked for me, I didnt expect it to after reading the post. When will these bugs be fixed, and more importantly how can I follow so that I can get my hands on the new release as soon as it gets out? Thanks a lot!
Click to expand...
Click to collapse
I still need to search what causes the Internet and SD Card to fail. Bluetooth does work, only Bluetooth Calls, Car connection and other devices are untested.
You can subscribe to this thread or subscribe to the DevDB project, to get a notification if it's updated. To get updates on your Smartphone, you could install XDA Legacy (Tapatalk) or XDA Labs (just called XDA) from Play Store.
john_sdr said:
allright, i'll check up for a twrp for our phone :angel:
EDIT: on the official twrp/devices, there is not our device. so, what's up next?
Click to expand...
Click to collapse
zenida said:
I knew we need TWRP 3.x.x to install an Android 6.0+ Rom. So, the network issue, could be related to the recovery version.
We should to update the recovery first, to install Marshmallow (and up) on a smartphone
Click to expand...
Click to collapse
CM Recovery didn't fix the problem. And I somehow can't get TWRP to boot.

Categories

Resources