Related
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk
i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation
Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin
philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...
Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk
the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help
This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !
thanx buddy for this info
Ya sure !
Sent from my GT I9003 using XDA app-
Galaxy SL
CF Root
XXKPH
Cranium Rom V.3.1
All trials failed
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks
rizo99 said:
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks
Click to expand...
Click to collapse
First flash xxkpe
then kpq (or jpkpe)
rizo99 said:
Hello,
after i've updated my Galaxy S GT-I9003 with an official Rom JPKPE Gingerbread 2.3.6, and after rebooting, it stucked at bootloop, i've tried everything suggested on web and forums, and lastly your solution, with no benefit.
the problem i noticed that when i press on wipe data/factory reset in recovery mode it tells me :
-- Wiping data...
Formatting /data...
Formatting /dbdata...
E:format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
so, is the corruption of the format volume rfs that causes the issue of bootloop
and is this a soft brick of the phone, or hard brick, could it be solved or the phone is dead?
i tried rooting it with CF-Root and bagaria.
if i converted the format to ext4, will that solve the issue.
if so, what are the steps to do that and from where can i get the software that i'll convert by
Note: i've started updating with the XXKPQ ROM putting the PIT file then i downloaded the JPKPE after i issued that problem of bootloop
another Question, is it right that i update with the PID file only knowing that i couldn't find any other files for phone and CSC for this version.
Hope any body could help me to get my phone to life again.
Thanks
Click to expand...
Click to collapse
Your phone still enters recovery mode right.. and Enter into Download mode and Flash XXKPE with latona.pit .. then see if it boots up correctly.. then flash XXKPQ...
Bricked Phone
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
I recovered my phone!!! thanks to this post http://forum.xda-developers.com/showthread.php?t=1486616 Thank you all devs and xda...you don't know how I love you at this moment
The__Ripper said:
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
Click to expand...
Click to collapse
how were you able to flash anything if phone was switched off
The__Ripper said:
Hi, I tried your method, but I couldn't enter downloading. I was flashing a stock rom and after flashing the latona, I stupidily forgot to reboot my phone in downloading and I flashed the stock rom with the phone off...then I was not able to enter downloading...does anybody know some possible solution?
P.S. I know it was really stupid :/
I recovered my phone!!! thanks to this post http://forum.xda-developers.com/showthread.php?t=1486616 Thank you all devs and xda...you don't know how I love you at this moment
Click to expand...
Click to collapse
Yea exactly what devilhell said. Its impossible to hardbrick your phone technically if you haven't flashed any bootloader on it.
Cheers
Sent from my GT-i9003 powered by MIUI
As long as your boot partition and recovery partition is not corrupted your phone is recoverable. If boot partition is corrupt your phone will not boot. So as long as your phone boots it is recoverable.
Sent from my GT-I9003 using XDA App
Deep in my heart we do beleave xda shall over come some days
Adi_Pat said:
This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !
Click to expand...
Click to collapse
# Dont need to hardreset. Just follow simple procedure and done.. Thank you. Thanks a lot xda-dev.
NB: I bricked my GT-i9003 v.3.2.6... I just follow the guide and read the xda members how to 3/4 times. ANd i dont get any problems at all... Oh my OS version downgrade from Gingerbread 3.6 to Froyo 2.2 .
Thanks, you saved me!
I flash KPQ but device not boot
Download mode working, device not boot, the screen turns on and off for a second
I flash I9003XEKB1 and device boot!
Thanks!!
Thanks...! Really helped me!
Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?
lichongwei said:
Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?
Click to expand...
Click to collapse
For a single file, no need to partition. Reflash the right way and it'll be alright
Cheers
Sent from my GT-i9003 powered by MIUI
lichongwei said:
Hi there,
i have an I9003 and it is using froyo 2.2
i intended to upgrade until gingerbread and i have chosen the KPU (latest ROM). I use mobile ODIN to flash and the bootloop issue happens.
So, to recover back, i came to here with hope to recover my I9003.
the steps i did was:
1. Download and run odin 1.8.5.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Click PDA button and select this file: I9003xxxxx-KP7...-.tar.md5 (single file FW)
5. Put your phone into download mode: Press Volume down + OK + Power.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button, then unselect Re-Partition box.
9. Click Start button to flash the files to phone.
10. Everything pass except there is 1 failure.
Now my I9003 can boot up, however with bootloop issue. What should i do now?
Click to expand...
Click to collapse
Initialy, u no need to flash pit file.
now, u have to reflash xxkpe with have 4 files.
Read first the flash guide b4 flash again.
Sent from my GT-I9003 using Tapatalk
i9003 dead
I had my phone i9003 flashed to a i9000 stock rom by a total mistake.
I had both pit files on my PC so I mixed up by a mistake.
Now my device is completely dead and nothing works out. Not even charging, completely unusable now.
Hardware reset, JIG's and combination keys, ODIN setups..nothing takes me to download mode.
Phone is still under warranty so afraid to JTAG.
Do you all think my phone is recoverable? Will the samsung warranty tech's will find out about the issue and won't the claim?
Please help. tried everything and now clueless.
Hy,
my problem is,
that the storage is not prepared yet.so says the phone.also please use UI menu for format and reboot action.
and
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
I have no idea what to .
I've reflashed xxkpe everything.
I have amits kernel to format all partitions, everything wipt and and and
But nothing has helped
can someone please help me there?
P.S: kernel panic mode occurs when I remove the sdcard
xXCorleoneXx said:
Hy,
my problem is,
that the storage is not prepared yet.so says the phone.also please use UI menu for format and reboot action.
and
E:format-volume:rfs format failed on /dev/block/mmcblk0p3
Data wipe failed.
I have no idea what to .
I've reflashed xxkpe everything.
I have amits kernel to format all partitions, everything wipt and and and
But nothing has helped
can someone please help me there?
P.S: kernel panic mode occurs when I remove the sdcard
Click to expand...
Click to collapse
Did u convert the system to ext4 because ı had a problem like this with mobile odin and after first boot it says as you faced but when i convert the system and all the others to ext4 with chainfire ext app. Everything was ok.
Sent from my GT-I9003 using Tapatalk
prb in samsung galaxy s gt-i9003
well i have a simple question i have samsung S gt i9003 and i just update the software through my cell its in the option and after dl and installing the it stopped during istallation and it says update fail!!! kernel verify fail and red screen appears and dissappear after 2sec now i can only do download mood so can anyone help me wat to do?
hi everyone
my tab got boot loop 2 days ago.i'm stuck at "samsung galaxy tab 7+" logo,i can't even enter the animation and another samsung logo,and every time i tried to turn off the machine,it did not.the screen just off few second and its on again with the same logo
and in the recovery mode, the tab said "can't mount thing" "no such directory" and etc with a "android + yellow triangle background"
i already flashing with ODIN(Firmware6200XXKL7/P6200OLBKJ1/P6200XXKL7/P6200XXKL7 and firmware : P6200XXKK6_P6200OLBKJ1_P6200XXKK6_HOME) twice and complete.but still got the problem
i would appreciate if someone help me to solve this problem or at least give me advice
btw,bought this device in from indonesia(made in korea)
Baseband Version: P6200GSMH
sorry for bad english
thanks before
try holding power and vol+ for at least 10 seconds, and keep holding it. or try power and volume down for 10+ seconds.
should attempt to get you into recovery or download mode.
chrisrotolo said:
try holding power and vol+ for at least 10 seconds, and keep holding it. or try power and volume down for 10+ seconds.
should attempt to get you into recovery or download mode.
Click to expand...
Click to collapse
thanks for the reply
i can go to the recovery mode and download mode..i already flash my tab in download mode and wipe data in recovery mode.but the problem still there
so what should i do?
see if you can get an adb log, you could also try Samsung Kies (2.0) It may have trouble finding device/ installing drivers; you might want to connect it in download mode. There are emergency recovery options in Kies I think, but its probably same thing as Odin. Are you sure that is the correct firmware for your device? are you familiar with Odin? possible bad flash/disconnected?/bad cable?
i recommend try flashing whatever firmware you originally had. a full stock one with .pit file would be ideal.
try sammobile.com/firmwares
chrisrotolo said:
see if you can get an adb log, you could also try Samsung Kies (2.0) It may have trouble finding device/ installing drivers; you might want to connect it in download mode. There are emergency recovery options in Kies I think, but its probably same thing as Odin. Are you sure that is the correct firmware for your device? are you familiar with Odin? possible bad flash/disconnected?/bad cable?
i recommend try flashing whatever firmware you originally had. a full stock one with .pit file would be ideal.
try sammobile.com/firmwares
Click to expand...
Click to collapse
thanks again
i don't know,that is correct firmware or not,but i pretty sure there is no bad cable or disconnected
many thanks for the recommendation,i will download it.let you know
just flashing with firmware sammobile.com still no luck..
i want try the other version firmware(same region and country) but there are five file in the archive file,
here the list
GT-P6200-MULTI-CSC-OLBJ1.tar.md5
MODEM_P6200XXKK1_REV_02_CL1075407.tar.md5
MODEM_P6200XXKK1_REV_04_CL1075407.tar.md5
P6200_APBOOT_P6200XXKK1_CL577298_REV02_user_mid_sh ip.tar.md5
P6200_CODE_P6200XKK1_CL577298_REV02_user_mid_ship .tar.md5
Click to expand...
Click to collapse
which file is the firmware?
and also,it's look like,until now there is no .pit file for p6200
any suggestion ?
thanks for the answer before
Urgent help on samsung galaxy tab p6200 needed plz
Model Number : GT–P6200
Android Version : 3.2
Baseband Version : P6200XXKL7
Kernel Version : 2.6.36-P6200JPKL2-CL606727 [email protected] #3
Build Number: HTJ85B P6200JPKL2
i have rooted my phone,
it was working perfectly fine,
but when i done factory reset then the problem started,
it ia automatically restarting again and again
not able to switch off n switch on
then download rom (P6200XXKL7_P6200XEUKL1_XEU)
and tried to flash rom but tar file is not showing from odin pda,
please help me
nabildarwajkar said:
Model Number : GT–P6200
Android Version : 3.2
Baseband Version : P6200XXKL7
Kernel Version : 2.6.36-P6200JPKL2-CL606727 [email protected] #3
Build Number: HTJ85B P6200JPKL2
i have rooted my phone,
it was working perfectly fine,
but when i done factory reset then the problem started,
it ia automatically restarting again and again
not able to switch off n switch on
then download rom (P6200XXKL7_P6200XEUKL1_XEU)
and tried to flash rom but tar file is not showing from odin pda,
please help me
Click to expand...
Click to collapse
Try this instructions carefully. It works for any samsung phones:
http://forum.xda-developers.com/showpost.php?p=27043121&postcount=9
but in step 3, when it says if you weren't in GB, don't worry about it. What it is, if you change version of android (i.e. from Honeycomb to ICS and vice versa), than you need to include pitfile and repartition, as well as flashing dbdata.rfs.
Thanks buddy
I will try as u suggested
and will come back soon after flashing
thanks
still same problem please help
i tried flashing as u suggested and successfully compleated but still restarting only 1 thing improved that is now am able to switch off my tab
please guys help me dnt wanna loose my tab
and 1 more thing in odeen, where i can put dbdata file
please help
You can flash dbdata on pda field as well. Make sure you use the correct file. Before you proceed with it, can you go to recovery mode and do factory wipe? Let me know if you got any mounting error message or not after wipe.
Nore: if you need a pitfile, you can download this:
http://forum.xda-developers.com/misc.php?do=showattachments&t=1441350
Any solution yet? My device suddenly acting the same way when I doing Factory Reset in cmw recovery. I've try doing reflashing via odin to xxkl7 and dxkl3 with no lock, im still stuck bootlooping on first splash screen.
Something I found is that if Im flashing the rom using heimdall, it always failed on flashing the cache, with a message saying that heimdall being crash. Any advice?
continue holding vol up and power through 2 reboots, you should get recovery mode.
My device also experiences similar symptoms when formating /data. Perhaps the file system is corrupt or mild superbrickbug.
Anyways what I usually do Is Odin back to stock, when it passes it hangs at boot, reboot to recovery and factory reset/ wipe data. Should boot now.
For /cache issue. try the first step I mentioned to get into recovery and wipe /cache, actually format it too, if you have CWM Recovery. Wipe dalvik and factory reset too. Then I would try Odin to stock. And again wipe /data if stock Odin doesnt boot.
good luck.
Hi Guys
I have a galaxy note 10.1 N8013 about week ago I got the notification to update for the Jelly Bean for some reason it went to clockworkmod and give me a error Im not sure If I did Wipe de CACHE but after thoses error All I got is the boot Screen stuck on Samsung Galaxy note 10.1 that is...
what works
I Can flash odin without errors
I Already tried Stock 4.0.4 and Jelly Bean 4.1.2 Stock but it will never boot on get stuck on the same screen....
What is wierd...I got on odin mote Holding VOLUME UP and POWER yes VOLUME UP and POWER I dont know why but it was suppouse to go in CWM but only goes on ODIN mode, and after goes on ODIN mode i have to press volume down to continue and it was suppouse to restart and not continue...for some reason the volumes buttons are reversed I dont have any idea how...
I willing to donate for anyone who can really Help...
Thanks
Manny
Hi,
I also had some troubles recently and I did a lot to actually be able to boot again.
This may be a stupid question but did you really install CWM or does it boot to the standard recovery? I had some troubles installing CWM in the beginning.
My first step was to install CWM (I used TWRP) - http://forum.xda-developers.com/showthread.php?t=1851548
These steps where mentioned in some thread but I cannot remember where:
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable flash recovery" , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
I had to do a full wipe to install a new firmware and I used stock 4.1.2 DEODEXED - http://forum.xda-developers.com/showthread.php?t=1909950
After the wipe I installed via CWM (TWRP) and loaded the firmware from external SDCard (it has to be FAT32 at least for mw exFat was not working).
Good luck!
rustikus
mloureirojr said:
Hi Guys
I have a galaxy note 10.1 N8013 about week ago I got the notification to update for the Jelly Bean for some reason it went to clockworkmod and give me a error Im not sure If I did Wipe de CACHE but after thoses error All I got is the boot Screen stuck on Samsung Galaxy note 10.1 that is...
what works
I Can flash odin without errors
I Already tried Stock 4.0.4 and Jelly Bean 4.1.2 Stock but it will never boot on get stuck on the same screen....
What is wierd...I got on odin mote Holding VOLUME UP and POWER yes VOLUME UP and POWER I dont know why but it was suppouse to go in CWM but only goes on ODIN mode, and after goes on ODIN mode i have to press volume down to continue and it was suppouse to restart and not continue...for some reason the volumes buttons are reversed I dont have any idea how...
I willing to donate for anyone who can really Help...
Thanks
Manny
Click to expand...
Click to collapse
rustikus said:
Hi,
I also had some troubles recently and I did a lot to actually be able to boot again.
This may be a stupid question but did you really install CWM or does it boot to the standard recovery? I had some troubles installing CWM in the beginning.
My first step was to install CWM (I used TWRP) - http://forum.xda-developers.com/showthread.php?t=1851548
These steps where mentioned in some thread but I cannot remember where:
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable flash recovery" , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
I had to do a full wipe to install a new firmware and I used stock 4.1.2 DEODEXED - http://forum.xda-developers.com/showthread.php?t=1909950
After the wipe I installed via CWM (TWRP) and loaded the firmware from external SDCard (it has to be FAT32 at least for mw exFat was not working).
Good luck!
rustikus
Click to expand...
Click to collapse
Thanks so much for yiur anwser
Yes i Had success flashing CwM on odin and also I unchecked auto reboot as I said I dont know why my volume button are reversed holding volume up and power after flash it will bring me back to odin mode... very wierd and there is not problems with my tablet is only one month old no. buttons damaged
I flashed the German 4.1.1 onto my 8013. when I went back to ICS to get the official update I was stuck on Samsung logo. I had to reflash the ICS a second time and then I was all good. I didn't have CWM tho, I was rooted with the exynos exploit
If you are able to boot into CWM (and you do not have any relevant data left on that tables) do a wipe again (there are several wipe options).
Cache and Dalvik Cache wipe is very important and I also do a wipe for /system, /cache and /data.
Then try to boot into CWM and install the ROM from there. For me only the installation via SDCard worked.
rustikus said:
If you are able to boot into CWM (and you do not have any relevant data left on that tables) do a wipe again (there are several wipe options).
Cache and Dalvik Cache wipe is very important and I also do a wipe for /system, /cache and /data.
Then try to boot into CWM and install the ROM from there. For me only the installation via SDCard worked.
Click to expand...
Click to collapse
That is the problem I Can Flash CMW but I can't run, I Only Can get on ODIN MODE by pressing Power+VOL UP and them VOL Down to continue on Odin MODE, I Can Flash anything on Odin with no errors even stock ICS and Jelly Bean but I have no away to run CWM, try Hold everything and diferente way Only thing I can get is Odin MODE....
Thanks for all the folks trying to helping if any one has a diferent sugestion I want Try..About a week without my TABLET....SAD
Wrong buttons is often a sign of wrong product or a fake/ clone .
Flash via odin this slightly simpler recovery .
http://forum.xda-developers.com/showthread.php?t=1831173
boot to recovery and wipe phone/ format all
jje
JJEgan said:
Wrong buttons is often a sign of wrong product or a fake/ clone .
Flash via odin this slightly simpler recovery .
http://forum.xda-developers.com/showthread.php?t=1831173
boot to recovery and wipe phone/ format all
jje
Click to expand...
Click to collapse
I Tried this one too...all I got after Flash is the Logo Screen boot...this Device is not fake I Bought on Newegg.com and Box was Sealed, Volume was not reversed before because I rooted it before and did use clockworkmod before and I always use standard way to run clockworkmod holding Volume down+power no lucky 3 weeks and my odin is count 30 already lol lol Thanks for everyone trying to help me....Hopefully some one come out with some thing direferent,,,
Did you flash the wrong model rom on your Note? This too will screw things up like you are explaining...
ultramag69 said:
Did you flash the wrong model rom on your Note? This too will screw things up like you are explaining...
Click to expand...
Click to collapse
I went to Samfirmware got the first stock rom Ics 4.0.4 download and flashed then did not working I went back on samfirmware and downloaded the jellybean stock 4.1.2 and nothing, everything happend. after. the jellybean update shows up my device was rooted so it restart and gave me a error on CWM I am not sure but I think did wipe cache or nand when it happens did I screw. up?
mloureirojr said:
I went to Samfirmware got the first stock rom Ics 4.0.4 download and flashed then did not working I went back on samfirmware and downloaded the jellybean stock 4.1.2 and nothing, everything happend. after. the jellybean update shows up my device was rooted so it restart and gave me a error on CWM I am not sure but I think did wipe cache or nand when it happens did I screw. up?
Click to expand...
Click to collapse
CWM error reroot with CWM .
jje
JJEgan said:
CWM error reroot with CWM .
jje
Click to expand...
Click to collapse
Thanks jje
but I can't make CWM to run...I can Flash CWM but does not work, I Only have ODin mode...and anything I Flash only get Boot screen...
I have your answer
mloureirojr said:
Hi Guys
I have a galaxy note 10.1 N8013 about week ago I got the notification to update for the Jelly Bean for some reason it went to clockworkmod and give me a error Im not sure If I did Wipe de CACHE but after thoses error All I got is the boot Screen stuck on Samsung Galaxy note 10.1 that is...
what works
I Can flash odin without errors
I Already tried Stock 4.0.4 and Jelly Bean 4.1.2 Stock but it will never boot on get stuck on the same screen....
What is wierd...I got on odin mote Holding VOLUME UP and POWER yes VOLUME UP and POWER I dont know why but it was suppouse to go in CWM but only goes on ODIN mode, and after goes on ODIN mode i have to press volume down to continue and it was suppouse to restart and not continue...for some reason the volumes buttons are reversed I dont have any idea how...
I willing to donate for anyone who can really Help...
Thanks
Manny
Click to expand...
Click to collapse
Hey man,
Heres what you do.
1) Boot into download mode, and flash the stock JB
Get CWM High on Android from max at rootgalaxynote.com heres the link http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
The file you want is the root galaxy note 10.1 zip.
2) Open ODIN and flash Max's CWM high on android.
3) Reboot Recovery will work now. BUT WHEN YOU TURN OFF YOUR DEVICE IT WILL AUTO REBOOT, SO WHEN THE SCREEN GOES BLACK AFTER YOU SWITCH IT OFF IMMEDIATELY START HOLDING VOLUME UP PLUS POWER. WAIT FOR THE SAMSUNG Galaxy note 10.1 LOGO TO FLASH ON TWICE. LET GO OF POWER AND CONTINUE HOLDING VOLUME UP, WAIT UNTIL CWM RECOVERY STARTS!!
4) Wipe data factory reset, wipe cache, wipe dalvik cache three times each in that order.
5) Reboot and wait up to 10minutes for the device to boot VOILA!!! You have your not3 back on stock JB or ICS whichever you originally flash!
Please donate if this helps and thumbs up!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 09:19 AM ----------
JJEgan said:
CWM error reroot with CWM .
jje
Click to expand...
Click to collapse
JJE if you are going to rip off my method of getting back to stock from bootloop at least do it right.. :laugh:
---------- Post added at 09:27 AM ---------- Previous post was at 09:23 AM ----------
mloureirojr said:
Thanks jje
but I can't make CWM to run...I can Flash CWM but does not work, I Only have ODin mode...and anything I Flash only get Boot screen...
Click to expand...
Click to collapse
Use my method. JJe was trying to tell you how to do it. But he doesnt know how..:laugh::cyclops:
JJE if you are going to rip off my method of getting back to stock from bootloop at least do it right.. :laugh:
Getting back to stock from bootloop has been the same for years and does not need such a convoluted method as yours .
Fixed enough bootloops on multiple devices including Note 10.1
But if it works for you then use it one more method of fixing boot-loop is one more tool to save the day .
jje
your method doesnt work.
JJEgan said:
JJE if you are going to rip off my method of getting back to stock from bootloop at least do it right.. :laugh:
Getting back to stock from bootloop has been the same for years and does not need such a convoluted method as yours .
Fixed enough bootloops on multiple devices including Note 10.1
But if it works for you then use it one more method of fixing boot-loop is one more tool to save the day .
jje
Click to expand...
Click to collapse
Your method doesn't work.
Convoluted by definition means too complex to follow.
In the context of successfully getting a device step by step to a working state it is the steps that are necessary for understanding. Especially for many beginners.
Convulsion is not the same as clarity. Which is lacking in your response to Manny.
Der cwm error. Reboot CWM.. Der. He mentioned being unsuccessful at getting into cwm.. derp.
You posted on a thread I made about bootloop after update check on root injected FW. You said the easy method to get out of bootloop is to flash stock FW through odin. That method doesn't work. It also shows how your opinion changed thread to thread...
Hey Guys I really appreciate both of you, If works or not I least you guys are trying to help this is cool, here is the updated news I know you guys will say it was dumb but i send it to samsung say what they say I'm 90% sure they will say I root because my odin mode was counting 30 already lol and it was saying CUSTOM , So if they denied to fix I suppouse to get it back when I get it back we will try to fix that crazy bootloop I will be back here as soon I get my Tab back but for now Thanks so much for the help
Mannt
Mate if you send to Samsung there won't be a bootloop problem... They'll probably flash the stock rom, find it doesn't work and replace the motherboard....
Depending on how nice the repair guy is it might cost $$$ or nothing...
Here's hoping you get a lenient guy....
ultramag69 said:
Mate if you send to Samsung there won't be a bootloop problem... They'll probably flash the stock rom, find it doesn't work and replace the motherboard....
Depending on how nice the repair guy is it might cost $$$ or nothing...
Here's hoping you get a lenient guy....
Click to expand...
Click to collapse
Crossed Fingers LoL LoL ...Just like you said depends what kind guy take it to fix....if is a cool guy will just send me a new one, when I called they asked me if I want fix mine or get another one I said send another one please...i know they will send a refurbished one but i dont care, all I wante is when the technician connect it to the samsung Kies and try to do an emergency restore and he will get some korean alert message just like I did he will say you know what this is really bad ...lol lol let's get a new one lol lol lol
thanks guys
Got it working now?
mloureirojr said:
Thanks jje
but I can't make CWM to run...I can Flash CWM but does not work, I Only have ODin mode...and anything I Flash only get Boot
Did you get your note running yet?
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
mloureirojr said:
Hey Guys I really appreciate both of you, If works or not I least you guys are trying to help this is cool, here is the updated news I know you guys will say it was dumb but i send it to samsung say what they say I'm 90% sure they will say I root because my odin mode was counting 30 already lol and it was saying CUSTOM , So if they denied to fix I suppouse to get it back when I get it back we will try to fix that crazy bootloop I will be back here as soon I get my Tab back but for now Thanks so much for the help
Mannt
Click to expand...
Click to collapse
Sorry pal but that wasnt a great idea.. Your device was not broken. Bootloops always fixable. Good luck with samsung though. Never confirmed it but they supposedly check flash counters. Thats why your supposed to reset it..
Click to expand...
Click to collapse
I got the same problem
Shagerty said:
mloureirojr said:
Thanks jje
but I can't make CWM to run...I can Flash CWM but does not work, I Only have ODin mode...and anything I Flash only get Boot
Did you get your note running yet?
---------- Post added at 08:30 AM ---------- Previous post was at 08:27 AM ----------
Sorry pal but that wasnt a great idea.. Your device was not broken. Bootloops always fixable. Good luck with samsung though. Never confirmed it but they supposedly check flash counters. Thats why your supposed to reset it..
Click to expand...
Click to collapse
Dear,
I got the same problem, i tried Shagerty's method but still can't login to the recovery mode. Do i need to reset the counter?
Click to expand...
Click to collapse
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.
MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.
mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient