My wife has a Shift and whenever the hardware keyboard is opened the screen goes black. It just started doing this a few days ago. We already had one swapped out under warranty for basically just bugging out. Is this another case of faulty hardware or is there some simple fix like cleaning a contact? It doesn;t fc or anything just goes black.
Its bone stock, I mess with my own E4GT but don't touch her phone.
I have the same problem just never got it fixed. Its the flex cable going bad I believe
Sent from my PG06100 using Xparent Red Tapatalk 2
Indeed, it is the flex cable. I have had this happen to two of my shifts. The sprint store should replace it no questions asked. The only bad part is that the shift is not stocked in stores anymore, they have to order one in. Usually takes 3-5 days.
Yes the damm Flex Cable is the Shift's Achille's heel.
^^Ain't that the truth. This is my 3rd shift, but tomorrow I'll have an EVO 4G LTE!
Thanks guys I will let her know to take it in. This HTC phone seems a bit flaky, no wonder why they dropped support so quick.
I don't think it is necessarily their fault. I think broken flex cables are a curse of the sliding form factor. I know some other phones that have suffered issues with it as well.
HTCotta said:
I don't think it is necessarily their fault. I think broken flex cables are a curse of the sliding form factor. I know some other phones that have suffered issues with it as well.
Click to expand...
Click to collapse
The doubleshot suffers from it and I had a motocliq that went out
Sent from my myTouch_4G_Slide using Tapatalk 2
Yeah the shift is my 4th landscape slider, all with flex cable issues. Granted, they were all HTCs
The HTC Touch Pro, and the Touch Pro2 both had the same issue with the flex cable.
prboy1969 said:
The HTC Touch Pro, and the Touch Pro2 both had the same issue with the flex cable.
Click to expand...
Click to collapse
Strangely enough I never had that problem with both those phones. My touch pro 2 is actually still running pretty good
Sent from my PG06100 using Tapatalk 2
I have my original shift and I've never had a problem with the keyboard. My proximity sensor and earpiece speaker have gone out though.
Sent from my PG06100 using xda premium
I still have my touch pro running without issues. My shift too. I'm lucky with phones I guess lol.
prboy1969 said:
The HTC Touch Pro, and the Touch Pro2 both had the same issue with the flex cable.
Click to expand...
Click to collapse
Yep I had a Mogul (1 flex cable replacement), TouchPro (FOUR flex cable replacements, had 5 of these in less than a year), TouchPro2 (1 flex cable replacement), and now the shift (2 flex cable replacements). Can't wait to get my EVO 4G LTE tomorrow though!
Oh I HATED this problem. Its the flex cable. I feel for you man :beer:
Sent from my PG86100 using Tapatalk 2
Did you have to pay for it?
did you have to pay for the replacement? i always thought if it was hardware you shouldnt have to pay for it by today my screen just went out and days before this it always shut off after puting it in keyboard position
HTCotta said:
Indeed, it is the flex cable. I have had this happen to two of my shifts. The sprint store should replace it no questions asked. The only bad part is that the shift is not stocked in stores anymore, they have to order one in. Usually takes 3-5 days.
Click to expand...
Click to collapse
ddoris1989 said:
did you have to pay for the replacement? i always thought if it was hardware you shouldnt have to pay for it by today my screen just went out and days before this it always shut off after puting it in keyboard position
Click to expand...
Click to collapse
If it's a hardware issue, which it sounds like it is. Then you should not have to pay anything. It also depends on the condition of the Device. If the Screen is Cracked or the Device is beat up, they sometimes try to claim it's your fault. But if the device is in good condition they don't usually say anything until they check it out. It might be a good idea to Un-root, and take the Device in to Sprint.
no its not cracked, theres not one ding scratch or anything to it, it almost looks like it came right out of the box im already nervous as it is with these kind of phones so i do my best to take care of it but thanks for the info..it makes me feel alot more reassured:laugh:
prboy1969 said:
If it's a hardware issue, which it sounds like it is. Then you should not have to pay anything. It also depends on the condition of the Device. If the Screen is Cracked or the Device is beat up, they sometimes try to claim it's your fault. But if the device is in good condition they don't usually say anything until they check it out. It might be a good idea to Un-root, and take the Device in to Sprint.
Click to expand...
Click to collapse
Lol read this as sh*t goes black... I believe its a bad flex cabel.
Sent from my Crespo using xda premium
Like I mentioned. Un-Root, then off to Sprint to have them check it out. But it definitely sounds like it's the Flex Cable as mentioned earlier. But if it's in the condition you say, you shouldn't have any issues with Sprint resolving your issue.
TEAM MiK
MikROMs Since 3/13/11
Related
Is anyone having a problem with the screen, well the phone, clicking when you touch the corners? Over the past few days it seems like the actual phone and back cover are not connected tightly resulting in a click sound and feel when typing on the keyboard. I have tried to re-seat the back cover with no luck. I am going to try and get an exchange today but the whole design around a uni body phone worries me long term.
I've posted the same thing and you're not alone. What you can do is put a paper inside the case and it'd resolve your problem for now
Sent from my HTC Sensation 4G using XDA App
You need to return that **** asap!
Sent from my HTC Feeling.
There appears to be some build quality issues with some devices out there last night I discovered that vibrate doesn't work on my phone.
check out my 1st and 2nd post in this thread just called T-Mobile and they're overnighting my phone, I love this phone but this is the first phone I had to exchange twice
Mcp,
Unfortunately I have to go threw hell to get mine replaced since my wife is an employee.
Bad vibrations... lol
I noticed on mine the vibration is very mild compared to say the MyTouch 4G.
RickCain said:
Is anyone having a problem with the screen, well the phone, clicking when you touch the corners? Over the past few days it seems like the actual phone and back cover are not connected tightly resulting in a click sound and feel when typing on the keyboard. I have tried to re-seat the back cover with no luck. I am going to try and get an exchange today but the whole design around a uni body phone worries me long term.
Click to expand...
Click to collapse
I have it to, actually dont know if I should take it so seriously.
Yhe it clicks a little but nothing serious.
Yup, my one day old sensation also clicks and make that noise when I press on the bottom right of the screen, just like yours. Also, the capacitive buttons are unevenly lit. This is my second unit, and I am very disappointed. I returned the first one because of a wacky battery. Build quality on that one was perfect. I might return this unit also.
Any other folks with the same issue?
Sent from my HTC Sensation 4G using XDA Premium App
darkdelusions said:
Mcp,
Unfortunately I have to go threw hell to get mine replaced since my wife is an employee.
Click to expand...
Click to collapse
Just called walmart and they're out of stock and I can only return/exchange at that walmart I would just return it and go to another store but its more expensive. Guess I'll call tomorrow and do a warranty claim
mcp2009 said:
Just called walmart and they're out of stock and I can only return/exchange at that walmart I would just return it and go to another store but its more expensive. Guess I'll call tomorrow and do a warranty claim
Click to expand...
Click to collapse
How would you know if T-Mobile would do the warranty claim with a new device?
Sent from my HTC Sensation 4G using XDA Premium App
i got the same problem.. didnt think it was a big deal.. im more concerned about data issues and root.. got mine on craigslist so i cant exchange right? i would have to take it up with htc correct?
when you exchange it.. do they charge you again?
i sent in my phone and they ordered me a new phone i received a charge of 291 dollars ontop of the previous 280
mike2518 said:
How would you know if T-Mobile would do the warranty claim with a new device?
Sent from my HTC Sensation 4G using XDA Premium App
Click to expand...
Click to collapse
I already talked to them and they were ready to overnight the replacement phone but they said they couldn't because I'm in my buyers remorse period
the bottom right corner seemed loose for me too, but i din't care that much and now, after using it for about 2 weeks it fits tight. don't know what happened.
anyone with loose buttom right corner and now its tight ???
what did you do ??
mine is loose too !!!
thats my second unit too... the first one made crackling noises when typing messages. this one is better ... but with loose corner !!!
mine is more like a loose right side. you can physically feel the screen go in to the back cover
xnifex said:
mine is more like a loose right side. you can physically feel the screen go in to the back cover
Click to expand...
Click to collapse
Yes, my first unit was flawless, I would have kept it if not for the wacky battery. This one annoys me every time I press on the right lower portion. I'm weighing my options, I only have 3 days left to exchange/return it to walmart
Sent from my HTC Sensation 4G using XDA Premium App
Got the same problem.
Tomorrow i am gonna switch back covers and see if it is the issue.
I think when you take the back cover of to many times the right side will show this problem.
Greetz.
Happens to my phone as well only if I press the right point. That sounds come from the battery. Pull the backcover and press on the battery then you'll hear some clicks. But I couldn't figure out how to solve that. Even putting paper didn't help.
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
hatchman16 said:
Hey everyone,
I recently bought my HOX at my local AT&T store about a month ago and managed to drop within the first 2 weeks I had it, and break both the glass and LCD. I went on ebay and bought both the LCD and glass together and installed it on my phone with no luck. Screen is totally black with no response. Everthing else works flawlessly, vibrator, capacitive buttons, and speaker. The aftermarket LCD screen's cable was straight so I had to make a fold in it like the original cable was. I worry that that might be what the problem is, though I highly doubt it. I would appreciate it greatly if someone could give me some advice on what I should do at this point. Return the LCD and glass or try something else. Thanks
Click to expand...
Click to collapse
Welcome, search the forum. Long story short, call HTC and have them fix it for ~$220
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
still gonna cost 200$ to replace with AT&T with insurance. but maybe the person there will be nice who knows.
SBA1226 said:
If you signed a contract when you bought the phone and are still within 30 days, I would just have AT&T add insurance to your line and make a claim for it.
Click to expand...
Click to collapse
Thanks for the quick responses, looks like im gonna have to bite the bullet and pay the $220 bucks. AT&T has terrible customer service and they had no interest in helping me.
still not fixed
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.
hatchman16 said:
Hello again,
I recently bought another replacement LCD and digitizer. Installed it in the phone still with no luck. Everything except the screen works perfectly. All the connectors and motherboard look perfect. I have called HTC and there have some of the worst tech support that I have ever experienced. Please respond...im running out of ideas.
Click to expand...
Click to collapse
I`ve got the same problem. Have you found a solution?
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
no :-/
Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..
ptesmoke said:
we're you esd grounded while installing it?
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
XtR3m3R said:
no :-/
Click to expand...
Click to collapse
Ya, that slight pinch you felt during the install......that was your $500's last words
bondarun said:
Try both the old one and the new one without placing it into the housing...
The problem you will face most is with the LCD strip which has to be inserted fully in the slot..
Which is very difficult to do so and needs lots of time on it...
see some Replacement videos on Youtube. It do show you step by step guide on replacing the LCD..
Just place the battery and all the connectors and try powering it on b4 inserting it into the housing..
Click to expand...
Click to collapse
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.
XtR3m3R said:
The old LCD isn`t working anymore. The LCD Connection is fully inserted. First time i started the device with the new LCD, everything was working well. A few seconds later i got the blackscreen.
Click to expand...
Click to collapse
May be its an Hardware issue...
Try plugging in the display alone not the digitizer cable..
Give a try..
18th.abn said:
Ya, that slight pinch you felt during the install......that was your $500's last words
Click to expand...
Click to collapse
Did he pretty much fry the whole thing?
No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2
18th.abn said:
No, he's getting it to boot I believe just no screen..
Try plugging into the pc and make sure it's being recognized.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Yeah i think the new LCD is broken. With a flashlight i can see Android on the screen
So i think the backlight is broken. So i will repair the phone with a new Display and Digitizer Unit. Right?
I tried the same thing, but mine was just the glass. Forget about trying to separate LCD from glass, really you are not that skilled (any of you!). anyway, It was about 45 days after receiving my HOX and I called ATT and just told them what happened and that my phone was in 1000 pieces, said I now have a contract and no phone (though I was much more miserable and depressed sounding at the time). She said "no problem, I will just toss out this old contract and we will start from scratch" It cost me another $99 but they sent me a brand new phone. I was shocked. First time a carrier ever made me smile (other than running LTE Speed Tests)
XtR3m3R said:
no :-/
Click to expand...
Click to collapse
i don't know i can't speak
I really have no idea how the hell it got inside...left it in my bedroom came back and saw it crawling. i assumed it was on the outside of my screen, but it was really inside :\ how the hell did it get in there? Its so disturbing...
I hope for your sake he manages to crawl out again and doesn't die there.
Speaker grille maybe?
he's already dead...sigh
yo blud7...im a Trini too! noticed your bmobile avatar
Avantiel said:
I really have no idea how the hell it got inside...left it in my bedroom came back and saw it crawling. i assumed it was on the outside of my screen, but it was really inside :\ how the hell did it get in there? Its so disturbing...
Click to expand...
Click to collapse
That's messed up... you should try low pressure blower.... btw this is mbetty.. have been that happen before and that solution worked a few times... different devices tho
Wow that's very disturbing. Hope you find a solution and now I have to stop leaving my note on the floor and onto a table or something.
Sent from my GT-N8013 using Tapatalk 2
There must be a hole between lcd screen which let an ant to go under it. Im sure that hole will cause some dirt to go inside as well which later can create something like a dust cloud inside. Those are common issue with htc device. Htc sensation exactly..but i never heard its happen to sammy product before..keep crossing finger..this is something to worry about
Sent from my GT-N8000 using xda app-developers app
Lol sorry it's kind of funny, but I do empathise for you. Had read a thread in the past with the exact same issue on a tablet. I wonder if warranty will cover ants
Sent from my GT-I9300 using Xparent Cyan Tapatalk 2
Buggy tablet
mano42 said:
Buggy tablet
Click to expand...
Click to collapse
It's a feature, not a bug.
Sent from my GT-I9300 using Xparent Cyan Tapatalk 2
Warranty covered
Have you been to the store to see if it is under warranty? And what they told you?
Supposedly the screen should be sealed. I think! Or not!
Just contact Samsung and ask them what you should do. Obviously this should not be possible.
Sent from my GT-N8013 using Tapatalk 2
I'll attempt blowing some can air into the speaker grill. If that fails ill contact Samsung cuz I bought this from amazon.
if it's still eligible to return, send it back to amazon and just say that it wasn't working properly and you'll get a replacement in a day or so.
ask me how i know....lol.
mgunthi said:
Have you been to the store to see if it is under warranty? And what they told you?
Supposedly the screen should be sealed. I think! Or not!
Click to expand...
Click to collapse
Could have got in the micro sd slot and crawled around. I worked in the field years ago for a cable company, a lady called in and said her cable box LED display was cutting off numbers so 8's looked like 3's and so on. I went to here house and noticed about 20 roaches inside her box!
rand33099 said:
Could have got in the micro sd slot and crawled around. I worked in the field years ago for a cable company, a lady called in and said her cable box LED display was cutting off numbers so 8's looked like 3's and so on. I went to here house and noticed about 20 roaches inside her box!
Click to expand...
Click to collapse
Wow that's bad. I would not want to touch anything in that house. Would have to disinfect like the biochemist do.
Hold a vacuum cleaner hose up to wherever you think he got in and maybe it will suck him out?
the memory card slot has always been covered...and i honestly cant see him crawling in through the speaker grill. its way too tiny
Maybe the charging port? Either way tablets are not air tight, and the ant got in.
Pretty sure Amazon can work with you as well, I have always had good customer service experiences with them.
Makes me feel better I paid for the best buy replacement plan
hello all looked every where seen similar ? but know answers any where .....have mt4gs that wont turn on just vibrates once was having problems with screen stuff looked distorted rainbow colored or screen not responding would have play with phone like slide keyboard in and out to get working again .....couldnt get to work pulled out battery put back in wouldnt start up.......same thing happen to the one before that similar prob still have it does same thing vibrates once........from what i gather from other posts is it might be flex cable have it apart flex cable looks fine ...would i be able to see if flex cable is messed up......... could it just be something came loose.......these are both factory oem no mods ...
If it's still under any kind of warranty I'd send it back with a note to quit returning the same phone to you. If you CAN send it, put a small indelible mark under the battery so you can check. If it's NOT covered you could theoretically fix it yourself if you're "electronics repair" inclined but it's not for the faint of heart....i.e., not easy.
If they try to SELL you another, you can get them on Ebay for half of what they'll try to sell you one for. For what they'll try to sell you one for, you can buy a Nexus 4 from google that's unlocked.....with enough change to take your GF out for a nice meal. A REALLY nice meal.
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Look at all the videos first.....
docflipside said:
no warranty , not new to electronic repair or modding ....have two of these phone dont want to throw them out ..especially if it only needs and 18 dollar flex cable ...which would be cheaper than buying any used phone....... trying to find some info first so i dont waste money on flex cable for no reason ...ps phone is totally apart..........i think phone is turning on but nothing happens with screen and screen was buuging out when stopped working both times on both phones ..... any ideas thanx
Click to expand...
Click to collapse
I just rebuilt my Slide (bought a new one that had a bad M/B on eBay for $65)--I tried to replace the digitizer & ended up breaking the LCD screen...The flex cable is between the LCD & the screen back mount....so it's not the easiest job.......Do yourself a favor & check out all the video on youtube first.
not a problem ..phones apart ...got skillz..... just looking for info ....i can take apart and put back together just about anything thats not the problem.ive done digi's ,broken screens,flex cables, power and volume buttons............ ive heard of this problem before just want to make sure i have the right solution ...so i dont buy the wrong part thank you
ps ...please no more posts about how hard it is.....
He does have a point, this phone is a pain in the ass compared to most, I too have disassembled many phones used to have a side business repair phones, and this was is possibly the biggest pain when it comes to how much sticky is used.
Anyway yeah it sounds like the main flex cable and that's where I would start.
Sent from my Nexus 7 using xda premium
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
same issue....
docflipside said:
So end result fixed first one....installed new main flex cable.....and tested it powered up and works fine just have to go back and screw her all together...was pain in the ass at the point where you need to separate lcd from slide housing but well worth will do another one tomorrow ....always first ones a ***** but not as hard as made to seem ......if any one needs help get at me will give pointers. will update again tomorrow
if any one has mt4gs and vibrates once and screen does not turn on its good bet its the main flex cable
Click to expand...
Click to collapse
i replaced the digitizer because it was cracked, in the process i broke the lcd, and tore the flex cable a little. i replaced both of those and now i cannot get the screen to turn on. if u or anyone else have any ideas that would be awsome! thanks in advance
p.s i have the htc mytouch 4g slide
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
demkantor said:
There are multiple screen options for this phone, they all fit but aren't interchangeable, make sure your new one is made by the same company as old one
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
There are a few ways, usually the manufacturer is stickered on the back or product number. If you can't find this there is a line indented across the back of one and not the others
Also read this
http://forum.xda-developers.com/showthread.php?p=33221940
Sent from my Nexus 4 using xda premium
jayj4ysmith said:
the phone was givin to me and i ordered the part on ebay it came from china. the package says. LH00042 LCD DISPLAY TOUCH SCREEN FOR MYTOUCH 4G. how would i know if it is the right part?
Click to expand...
Click to collapse
This forum is dedicated to the MT4GS. Your description indicates the MT4G. Different devices.
Hastily spouted for your befuddlement
Hello everyone,
my Photon Q fell two days ago and since nothing really happened except that the slider mechanism feels more lose than before, I wanted to ask you guys if 1) with your phone it is the same or 2) do you have an idea how to make it "tight" again?
I opened the phone but couldn't really find out what causes this gap on the left side (when the phone is closed and you are looking at the front). Even it's cosmetic (for some ) it bugs me a lot
Thanks
I've got the same issue, but I thought it could be an issue caused by a fall of the Photon Q.
Loader009 said:
I've got the same issue, but I thought it could be an issue caused by a fall of the Photon Q.
Click to expand...
Click to collapse
So yours fell too? Its probably due to the fall
Sent from my XT897 using xda app-developers app
Mine has been like this since day one. Thought it was just crappy manufacturing. MUCH more loose compared to my old Epic4g
judogti said:
Mine has been like this since day one. Thought it was just crappy manufacturing. MUCH more loose compared to my old Epic4g
Click to expand...
Click to collapse
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Solust said:
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Click to expand...
Click to collapse
Yes, I think so too. Before the drop it fit nicely...Hmm...but noone knows what to do to get it like that again?
Sent from my XT897 using xda app-developers app
I'm not experienced in hardware repair or mods, but if you can separate the two parts of the phone it looks like it has a single hinge with two rails for the slide mechanism. I don't think those would be damaged based on your pictures but there are also two pieces of metal, one on each side of the display connector. My bet would be that one of those got dented. The two pieces seem to be used as a stopping point for the slide as well as distancing/orienting the display.
Solust said:
You probably should have exchanged it then. It's likely yours was dropped during shipping or by someone in the Sprint store.
Click to expand...
Click to collapse
Nah, Im less than thrilled with this phone, I hope it dies soon and I'll switch models. I love having a slider but there are too many disappointments with this one looks like I'll have to go with an S3 or S4.
judogti said:
Nah, Im less than thrilled with this phone, I hope it dies soon and I'll switch models. I love having a slider but there are too many disappointments with this one looks like I'll have to go with an S3 or S4.
Click to expand...
Click to collapse
Congratulations. You came to say that you don't like this phone and happened to bring nothing to this conversation. We won't miss you.
Solust said:
I'm not experienced in hardware repair or mods, but if you can separate the two parts of the phone it looks like it has a single hinge with two rails for the slide mechanism. I don't think those would be damaged based on your pictures but there are also two pieces of metal, one on each side of the display connector. My bet would be that one of those got dented. The two pieces seem to be used as a stopping point for the slide as well as distancing/orienting the display.
Click to expand...
Click to collapse
Thanks, Solust, for your ideas. I've been thinking the same. I inspected both of them, when I opened the phone and one felt a little lose. Not as lose as the upper part of the phone feels now, though. Can you confirm that it are those things you were mentioning?
oTToToTenTanz said:
Thanks, Solust, for your ideas. I've been thinking the same. I inspected both of them, when I opened the phone and one felt a little lose. Not as lose as the upper part of the phone feels now, though. Can you confirm that it are those things you were mentioning?
Click to expand...
Click to collapse
At this point I do think it is beyond me and I'm a bit surprised someone more familiar with hardware hasn't stepped in yet. Might be worth a try PMing someone involved in the SIM mod.
The two metal pieces I was thinking of are on the keyboard portion of the phone. On the back of the display portion they create a mild groove the same size as the groove for the rails. One groove is left halfway up the phone and the other between that groove and the top of the phone. When the phone is together the display cable fits perfectly between them.
I'm sorry, all I can really do is speculate. I really don't know enough about this sort of thing. I may be mistaken as to what these parts are.
Solust said:
At this point I do think it is beyond me and I'm a bit surprised someone more familiar with hardware hasn't stepped in yet. Might be worth a try PMing someone involved in the SIM mod.
The two metal pieces I was thinking of are on the keyboard portion of the phone. On the back of the display portion they create a mild groove the same size as the groove for the rails. One groove is left halfway up the phone and the other between that groove and the top of the phone. When the phone is together the display cable fits perfectly between them.
I'm sorry, all I can really do is speculate. I really don't know enough about this sort of thing. I may be mistaken as to what these parts are.
Click to expand...
Click to collapse
I think it is pretty impossible to fix a dent in the hinge, right? But would that http://www.ebay.com/itm/MOTOROLA-PH...e_Replacement_Parts_Tools&hash=item20d0b14dc6 fix my problems?
^ I'm pretty sure it wouldn't. My Q is suffering from the very same problem, though I got over it quite a while ago since it's kind of a 'minor' issue I actually have the same exact part sitting on my desk right now, my listing on eBay to sell it just ended haha. I could test it out for you, if you really would like to know.
Sent from my XT897 using Tapatalk 2
xLoveHateLegend said:
^ I'm pretty sure it wouldn't. My Q is suffering from the very same problem, though I got over it quite a while ago since it's kind of a 'minor' issue I actually have the same exact part sitting on my desk right now, my listing on eBay to sell it just ended haha. I could test it out for you, if you really would like to know.
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
Haha, interesting I'm not so sure either, but I'm eager to do it lol. Hence I bought this yesterday night, although I'm not even sure how this hinge is fixed on the phone (glue etc?). I'd sure like to know how u fare, fella!^^
Sent from my XT897 using xda app-developers app
There's no glue, it just slides under these 3 little slots on the left side
Sent from my XT897 using Tapatalk 2
xLoveHateLegend said:
There's no glue, it just slides under these 3 little slots on the left side
Sent from my XT897 using Tapatalk 2
Click to expand...
Click to collapse
So why didn't u try it?^^
Sent from my XT897 using xda app-developers app