Database Info

Help!

guys pls help! When i reboot my phone, once it reboots it shoes me my homescreen and after media scanning and everything it reboots again and that goes on happening unless i keep my phone out of reach for 15-20 mins. Pls help me!

Android Crazy said:
guys pls help! When i reboot my phone, once it reboots it shoes me my homescreen and after media scanning and everything it reboots again and that goes on happening unless i keep my phone out of reach for 15-20 mins. Pls help me!
Click to expand...
Click to collapse
Which firmware are you using and the procedure u used to flash it
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5

sirilpta said:
Which firmware are you using and the procedure u used to flash it
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.

Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
Do a factory reset....
Sent from my GT-I9003 using xda premium

Just flash with another firmware. Try xxkpe..
Galaxy SL
CF Root
XXKPH
Cranium Rom V.3.1

Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
Did u came from xxkpe to xxkpq..?
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5

Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
1. first flash with only pit file re-partition checked
2. then press reset button and select four files pda,modem,csc,bootloader and flash it.
3. again enter into download mode
4. again flash with 4 files re-partition unchecked.
5. then flash with ddkp2 re-partition unchecked.

I facing this problem before. Try go xxkpe then go xxkpq. There are some stock rom already being released under i9003 android development tread. Go ahead flash with the right file to avoid any circumtances. Your problematic is our priolity. Thanks me if u like it. Cheers
Sent from my GT-I9003 using xda premium

Fixed via factory reset! Thanx a lot!

[Q] Please Help me!!

I flashed UC-KERNEL-v13-XXKPQ-GT-I9003_PDA on my i9003 and stuck in boot loop. I want to get it back to normal. Please help me!
And Odin doesn't detect my phone.

Did u wipe cache?? If that does not help try factory reset
press thanks if i helped!!
Sent from my GT-I9003 using XDA

There ain't no factory reset option. Wiped everything. But it didn't help. But thanks anyway.

there isn't wipe phone n user data in recovery mode?
Sent from my GT-I9003 using XDA

OK, now odin is woking but the problem is I don't know which one is the right one to flash..kernel..

For now use amit bagarias cf root..i think it's safest..
press thanks if i help you!!
Sent from my GT-I9003 using XDA

Thanks.
I bought this phone from Hong Kong.
Which rom should I download?

Just tell me baseband n build name...
Sent from my GT-I9003 using XDA

I flashed I9003XXKPM and now I'm in the bootloop.
Don't know why.

kl13710 said:
I flashed I9003XXKPM and now I'm in the bootloop.
Don't know why.
Click to expand...
Click to collapse
Just wipe data in recovery mode. Boot to recovery using volume up+power+home buttons
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

Follow This Method...
1) Flash Pit File from odin...
2) Flash XXKPE Firmware (exclude bootloader file)
3) Flash the firmware from ur country (search "I9003" in samfirmware.com then download the one from ur country)
DONE.!

Problem solved. This is how I did.
1.flashed GT-I9003_SER_I9003XXKPM_I9003XXKPM_I9003SERKPM with odin
2.flashed bagaria-09.GT-I9003_PDA with odin
3.thened flash miui via CWM
Thank you guys.

kl13710 said:
Problem solved. This is how I did.
1.flashed GT-I9003_SER_I9003XXKPM_I9003XXKPM_I9003SERKPM with odin
2.flashed bagaria-09.GT-I9003_PDA with odin
3.thened flash miui via CWM
Thank you guys.
Click to expand...
Click to collapse
are you able to receive or send SMS with Chinese word?
Sent from my GT-I9003 using XDA

Why not. Even if you can't, you still can change the font.

[Q] How to revert back to stock DDLF2 from rooted state?

Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks

Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003

simratcs said:
Dude thats simple...
Just flash ddlf2 using odin and u are good to go !!
Sent from my GT-I9003
Click to expand...
Click to collapse
Yes, just clean flash and the root is gone
Sent from my GT-I9003 using Tapatalk 2

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.

chongns said:
take the CR-ROOT zp file, open up with winrar, replace the file with DDLF2 normalboot.img, than flash with odin PDA. you will get back the stock kernel or maybe you will have boot looping, if not bootlooping, reboot the phone once, than factory reset.
try at your own risk.
Click to expand...
Click to collapse
Dude i think he is a new member so dont tell him such stuff that is a bit confusing for a newbie...
Let him just clean flash ddlf2
Sent from my GT-I9003

flash xxkpe then ddlf2

karanmirchandani96 said:
flash xxkpe then ddlf2
Click to expand...
Click to collapse
Hi, can I flash xxkpe on CWM recovery mode and update to DDLF2 from kies?
Just wanted to know can stock ROMs can be flashed from CWM recovery, just like cROM.

No u have to flash them via Odin only.
sent from Samsung galaxy S i9003 Remics JB v3

Thanks for the Info!!!

THANKS!
Flashed via ODIN as PDA, did wipe, cache clean and now I'm set...

hi i flashed ddlf2 everything is working except my wifi is there any solution?

agnivo007 said:
Hi,
I have rooted DDLF2 (using CF-ROOT). Now that I no more need root (stopped using an app that needed root), I need to get back to stock DDLF2.
I have already unrooted it using recovery mode > unroot.zip method.
All I need is 100% samsung stock DDLF2 on the phone now, without the cf-kernel, cf-recovery and apps that the rooting process brought in.
Please advise...
Thanks
Click to expand...
Click to collapse
use the android development section and download the ddlf2 files then use odin to flash it

amsad said:
hi i flashed ddlf2 everything is working except my wifi is there any solution?
Click to expand...
Click to collapse
Maybe this happened because you didn't clean install so here are the steps:
Download XXKPE from here.
Flash XXKPE by following the XXKPE install instructions (the archive should contain odin3 v1.83 or v1.85 if not here is odin3 v1.85)
Download DDLF2 from here (DDMF1 is the latest value pack so it's smoother and with better battery life)
Install DDFL2 or DDMF1( recommended) by following the value pack instructions (use only odin3 v3.04)
that's it, enjoy your stock rom
if this helped you ...hit the thanks button pls

How to back to GB from CyanogenMod 10 alpha 4 by dhiru?

Hii guys,i already ask this in official thread of cm 10 by dhiru but i can't understand,i can't get what dhiru say about don't flash modem in odin,and here is the step if i want to go back from cm 10 or cm9 by dhiru
1.repartition from odin
2.took and the battery and place it
3.flash xxkpe pda,modem,bootloader,csc
4.wait until phone booting and reset all data(press *2767*3855# in dialpad)
5.flash xxkpe all file again
And that's the right procedure?
Sent from my GT-I9300 using xda premium

Please someone help me
Sent from my GT-I9003 using xda premium

For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm

chung1213 said:
For me, I directly flashed xxkpe (since it will repartition it self) the flashed stock xxkpm
Click to expand...
Click to collapse
without pit or with pit?:silly:

I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.

dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
ok i have tooo many full backup on my pc

marshygeek said:
I'm not sure bro but what you mentioned is the right way to go back to GB. But im not sure what did Dhiru told you about modem. What im doing is i have my backup custom rom of GB. So if i want to go back to GB i just restore it from CWM.
Click to expand...
Click to collapse
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
Before you have flashed pit + xxkpe or after?

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
Vishal, u r right.
Restore from cwm just wont work cause partition format just wont right.
Sent from my GT-I9003 using Tapatalk 2

vishal24387 said:
Your method is quite confuaing me. For doing restore kernel.should be same which was used at the time of backup. GB kernel is entirely different from cm10 kernel. Then how u restore it??
Click to expand...
Click to collapse
But he just asked how to go to GB rom. Im doing this from the beginning. Is this bad? I got no issue so far.

I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.

Vasishta Reddy said:
I made an udate for my XPERIA S rom but i dont have signals tried loscounts method too,before releasing my rom I want to test my gsm ,Can anyone explain me step by step clearly how should I go back to KPU as base.
Click to expand...
Click to collapse
But i think you must
1.flash xxkpe+pit
2.flash xxkpu
And then full wipe
Sent from my GT-I9003 using xda premium

chongns said:
dude, a very simple instruction from Dhiru, do not flash modem with odin, it will corrupt your partition of CM alpha 4 which is using MTP system.
Alfix, have explain that use adb push to push the modem.bin of your choose to the /radio partition if you face radio issue or use a CWM flash zip to flash in recovery mode.
so, due to the new mtp partition system introduce by Dhriu CM10 alpha 4, the odin will not be use to flash anything. including the custom kernel.
how to go back to stock? you need to use odin with pit file, Lalotion case is a accident.
1. makesure your odin can detect your phone....
2. flash pit file first or together with XXKPE tar with or without bootloader. DON'T tell me it wont work, me and most of the member have done that, IT WORK!!
3. after flash KPE, your phone will reboot as normal.
Click to expand...
Click to collapse
Thanks this works for me :good:
Edit:-one thing should i flash kpu with pit ?

if wanna revert from what so ever custom rom back to gb... just flash kpe+pit.. after that just flash whtso ever stock gb rom u want.. no need for flashing pit again. pit once with kpe and your done re-partitioning..
Sent from my GT-I9003 using xda app-developers app

MR.Volkf said:
so just xxkpe+pit and i have another question,i can't access my usb stroge to copy files from my pc to my phone :crying:
Click to expand...
Click to collapse
try flash pit first till you get blank screen->remove usb cable and battery->flash xkpe twice->factory reset->flash ddlf2 twice->factory reset.
i always do that step if want to back to gb or go for ics/jb.never have any issue.hope this will help u.

[Q]How to flash stock ROM from Samsung site

I tried doing some research but with no luck. I wanted to ask if there is a way to flash a completely stock ROM I download straight from the Samsung site using maybe CWM or Odin. And how would I go on to have it rooted? I've just been having issues even with the stock debloated ROM available so I want to give this a try. Thanks in advance for any feedback and help
Sent from my SGH-T769

LiveFaster said:
I tried doing some research but with no luck. I wanted to ask if there is a way to flash a completely stock ROM I download straight from the Samsung site using maybe CWM or Odin. And how would I go on to have it rooted? I've just been having issues even with the stock debloated ROM available so I want to give this a try. Thanks in advance for any feedback and help
Sent from my SGH-T769
Click to expand...
Click to collapse
Im currently at work but pm later today around 5 pm or later I live in Texas central time zone and I could provide instructions how to do what you are asking for
Sent from my SGH-T769 using xda app-developers app

Hey thanks. Wouldn't it be nice to post your help on this thread so others that may have the same question can see?
Sent from my SAMSUNG-SGH-T769

I
LiveFaster said:
Hey thanks. Wouldn't it be nice to post your help on this thread so others that may have the same question can see?
Sent from my SAMSUNG-SGH-T769
Click to expand...
Click to collapse
So first register at www.sammobile.com, then search SGH-T769 under firmware and download the August 2012 ICS or The Feb 2013 ICS Firmware, wait for the download to finish (took me 30 minutes) then extract which ever firmware zip you downloaded then using Odin click on PDA and select the .md5 file which is located in the extracted ICS Firmware Folder that you've downloaded from sammobile.com
Download the PIT file here
http://forum.xda-developers.com/showthread.php?t=1919228
Click on PIT in Odin and then select the one downloaded from the link above
then make sure re-partition isn't checked and start the flashing process after it is done flashing and reboots you'll have stock ics to root it simply follow the instructions over at the root ics stock thread found here
http://forum.xda-developers.com/showthread.php?t=1919228
This will flash a custom recovery and once the recovery is flashed using Odin reboot into recovery and flash the superuser.zip then you'll have Rooted Stock ICS Firmware
*BOOT LOOP MIGHT OCCUR*
To fix boot looping after flashing stock ICS just boot into stock or custom recovery and wipe data and cache then reboot and you're good to go.
Sent from my SGH-T769 using xda app-developers app

Jserrano56 said:
I
So first register at www.sammobile.com, then search SGH-T769 under firmware and download the August 2012 ICS or The Feb 2013 ICS Firmware, wait for the download to finish (took me 30 minutes) then extract which ever firmware zip you downloaded then using Odin click on PDA and select the .md5 file which is located in the extracted ICS Firmware Folder that you've downloaded from sammobile.com
Download the PIT file here
http://forum.xda-developers.com/showthread.php?t=1919228
Click on PIT in Odin and then select the one downloaded from the link above
then make sure re-partition isn't checked and start the flashing process after it is done flashing and reboots you'll have stock ics to root it simply follow the instructions over at the root ics stock thread found here
http://forum.xda-developers.com/showthread.php?t=1919228
This will flash a custom recovery and once the recovery is flashed using Odin reboot into recovery and flash the superuser.zip then you'll have Rooted Stock ICS Firmware
*BOOT LOOP MIGHT OCCUR*
To fix boot looping after flashing stock ICS just boot into stock or custom recovery and wipe data and cache then reboot and you're good to go.
Sent from my SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.

anactoraaron said:
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.
Click to expand...
Click to collapse
The PIT I wasn't sure if it was needed or not so I always used it just in case and actually I waited patiently and my phone did bootloop.
Sent from my SGH-T769 using xda app-developers app

anactoraaron said:
The only thing I will add here is that you don't need the .pit file (it also eliminates the chance of accidental re-partition). Just use the .tar.md5 file as the pda and flash. Also, there isn't any chance of boot looping when flashing the file from the samfirmware site. First boot will take up to 10 minutes.
Click to expand...
Click to collapse
do i still need to use the .pit when rooting?

LiveFaster said:
do i still need to use the .pit when rooting?
Click to expand...
Click to collapse
For rooting yes
Sent from my SAMSUNG-SGH-T769 using xda premium

LiveFaster said:
do i still need to use the .pit when rooting?
Click to expand...
Click to collapse
Not for ICS you don't. In fact, you only need the .pit for flashing CWM.
For rooting GB 2.3.x then you need the pit.

anactoraaron said:
Not for ICS you don't. In fact, you only need the .pit for flashing CWM.
For rooting GB 2.3.x then you need the pit.
Click to expand...
Click to collapse
To be honest even that's debatable - I haven't used it the last several times flashing cwm via odin. Ymmv of course

Being honest I just follow the instructions to avoid bricks
Sent from my SAMSUNG-SGH-T769 using xda premium