Database Info

Help

Droid2 stuck in boot Motorola sign took it to a verizon store to load the rsd.img to reset it and they say they can't because im rooted...I thought with the rsd it was possible?
Sent from my LiquidMetal using XDA App

Did they know you were rooted or did you tell them? Red lite is a program you run on your own from a computer
Sent from my DROID2 using XDA App

RSD not "red"
Sent from my DROID2 using XDA App

No I did not tell them about root...I tried rsd lite but I read they have not released the .img, for the OVA update released not to long ago
Sent from my LiquidMetal using XDA App

Find the 2.3.20 full sbf file and hook the phone up and flash it. As long as you get a bootloader screen or the like you can recover regardless of what's messed up, including the recovery.
If you could post more detail about what your phone is displaying when you turn it on, that would go a long way to helping you out further

kp432 said:
No I did not tell them about root...I tried rsd lite but I read they have not released the .img, for the OVA update released not to long ago
Sent from my LiquidMetal using XDA App
Click to expand...
Click to collapse
TBH did not release the sbf for the unofficial OTA to GB, if you broke it you have to flash back to Froyo and start over using the 2.3.20, especially if you installed the version with the bad recovery (released on accident). Slide your keyboard out and power it on while holding the UP arrow, it should load up the bootloader screen and then you can connect to RSD lite and flash away. Make sure after you flash you fire up the stock recovery and do a factory reset (hold x till the android guy and triangle appear, then press the search button on the keyboard), sometimes the phone will bootloop otherwise after a flash.

I was still running froyo, never upgraded in any way to GB. Downloaded RSD lite 4.9, and updated my drivers. The sbf file i used was 2.3.20, the RSD could never find my phone. I tried to run as Administrator but can't figure out how to do it, I've tried every way. Running Vista on Desktop, and 7 on laptop. Still no luck.
the phone will not charge at all, I have to use a separate battery charger. If I press the power button the Moto Sign comes on and stays froze at this screen, until battery is pulled. I can get into the phones stock recovery, (power+x), I have wiped and reset, but just to get the Moto sign froze again. Several attempts on that one. Once battery is charged enough, I can connect with USB (power+up), to RSD lite. But RSD will not find phone. That's when I read that they haven't released the sbf file I need for the last OVA update, before the GB OVA update.
Thanks

kp432 said:
I was still running froyo, never upgraded in any way to GB. Downloaded RSD lite 4.9, and updated my drivers. The sbf file i used was 2.3.20, the RSD could never find my phone. I tried to run as Administrator but can't figure out how to do it, I've tried every way. Running Vista on Desktop, and 7 on laptop. Still no luck.
the phone will not charge at all, I have to use a separate battery charger. If I press the power button the Moto Sign comes on and stays froze at this screen, until battery is pulled. I can get into the phones stock recovery, (power+x), I have wiped and reset, but just to get the Moto sign froze again. Several attempts on that one. Once battery is charged enough, I can connect with USB (power+up), to RSD lite. But RSD will not find phone. That's when I read that they haven't released the sbf file I need for the last OVA update, before the GB OVA update.
Thanks
Click to expand...
Click to collapse
First go here http://www.mydroidworld.com/forums/...rld-present-droid-2-2-3-20-triple-threat.html
down load the drivers for Moto connect (more like the reason RSDLite wont see your phone)
make sure you have either RSDlite 4.8 or 4.9
download the 2.3.2 sbf file
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF
Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete.

Ill try tonight but I can't turn on pc mode the phone wont turn on ill try with usb on
Thanks
Sent from my LiquidMetal using XDA App

Here is an in-depth guide for how to SBF. Use the link posted above to download the SBF file.
http://forum.xda-developers.com/showthread.php?t=770224

Please keep questions in the general section and don't post them in the development section. The helpers will help you quicker and the development section stays cleaner.
Sent from my DROID2 using XDA App

[Q] Milestone xt 720 stuck on M logo

Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please

Have you tried to take out your SD card and reboot the phone again?
I was hit with same issue last time due to a bad SD card.
Alternatively you can try to reflash without a SD card.

yes, i've tried both ways, but no luck either way?

What did you do to get booyloop
Sent from my Milestone using XDA Premium App

mchlbenner said:
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
natifan81 said:
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Click to expand...
Click to collapse
..........

what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either

I haye to say this but your phone is bri cked dam can you get into bootloader.
Sent from my Milestone using XDA Premium App

Yes i can get it to bootloader mode, and i've tried to flash it back to stock Cincinnati Bell Rom, but when it completes the tasks it reboots phone and is still getting stuck on M logo Screen??

natifan81 said:
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
Click to expand...
Click to collapse
exactly the same thing happened to me...
I flashed froyo, was playing a few hours, and after firing flash phone was frozen and then I got bootloop
I was flashing phone with many different sbf's and nothing helped except official moto service center...

Use RSD lite above 4.9 Version, Download a sbf file for xt-720,go to boot loader and run the sbf file from Rsd lite. Your phone should start working.

if you are able to reach openrecovery, or some other way to access the phone internals,You may turn adb debugging during boot.
So if you have somewhat access to the phone to turn on ad debuging you have to
kill the usbd process ( pkill usbd if busybox is new enough)
then
Code:
echo "msc_adb" > /dev/usb_device_mode
You have to "integrate" that in your startup scripts.
Then issue "adb logcat" . The adb will wait for the phone and will start logging as soon as possible . When that happens, we will be able to adb shell to the phone, even if the display show just some static logo...
If you are not able to access the phone internals, other possibility exists, but requires to be able to fastboot the phone. Then custom initramfs can be prepared, which will include the above early adb enabling .
enabling adb taked from here:
http://code.google.com/p/cyanogenmo...e=update-adb_during_boot_enabler.zip&can=2&q=
have in mind of this issues (not a big deal, at least for me)
http://code.google.com/p/cyanogenmo...atus Priority Version Summary Stars&start=100

[Q] I flashed CM7 and now it will not even start. Help?

This is the first time I have flashed something. I made a backup right before flashing CM7 using ROM Manager. Every time I turn on my phone, it gets stuck on the boot screen, where there is the LG symbol with some colors in the back. When I flashed it, it went to the boot screen, and stuck there for over 15 minutes. I pulled the battery, and tried to turn it on, and it gets stuck on the same screen. I have tried over and over again, and I have searched the Internet for answers, but I am still stuck. I have tried holding Volume Down and Power, and it goes to a screen with an Android and a box, but nothing happens after that. Please help me, I am new to this stuff.

Have u flashed cwm through nvflash?
http://forum.xda-developers.com/showthread.php?p=13280029
Or u can try here as well
http://forum.xda-developers.com/showthread.php?p=13330067
After that don't forget to wipe ur data and format system before flashing new rom
Sent from my LG-P999 using xda premium

Waldano said:
Have u flashed cwm through nvflash?
http://forum.xda-developers.com/showthread.php?p=13280029
Or u can try here as well
http://forum.xda-developers.com/showthread.php?p=13330067
After that don't forget to wipe ur data and format system before flashing new rom
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I did try that. As it turns out, I was unable to get my computer to recognize my phone because, while my USB cable could charge my phone, it could not connect to the the computer (my dog chewed it up). I tried a different cable and it worked. Thanks for the help anyway.

Seeing that box after volume down+power means u didn't flash cwm correctly. U won't be able to flash any new rom if u flashed cwm using rom manager
Sent from my LG-P999 using xda premium

NVFlash is a must for you to use CWM. Follow the instructions to a T in the above links, and make sure to let the ROM sit after the flash.
Sent from my Cyanogen-filled G2x or my Galaxy Tab 10.1 now "In Paris"

And as for the original problem of why it got stuck in the bootloop, you probably didn't wipe everything.

[Q] help :/

hey guys,ive been using motorola defy since two months and its working sweet.
i installed cyanogenmod 7 r1.5 aka gingerbread 2.3.5 on my defy and after sometime i by mistake wiped of the data/factory reset from my stock recovery.
now my phone wont boot and when i plug it on charging,it shows a battery with ? sign :/ ivetried booting miui then,but it still wont work.phone aint even flashing sbf using rsd lite.help me?!
p.s ive got a backup of stock 2.2.2 via titanium backup,but i guess its of no use until youve got the titanium backup app?

Locate your original ROM from here. Download it, DL RSD Lite and latest Moto drivers.
Enter into Bootloader mode (Vol+ + Pwr button), plug your phone to the PC and via RSD Lite flash original SBF file (you can flash Froyo 2.2.2 CEE).

First of all. Tell me while goin through bootlader menu are you getting error "battery low cannot program". Den u will br needing the stock froyo sbf india realease, its up in a post by me in development section. And first u ve to do mcgavee method, or try to charge ur phone with a wall charger or get a battery from someone.. if u need help nd from india call or text me on 08447224336, i ve just solved this problem 2 days ago
Sent from my MB525 using XDA App

[Q] Device completely unusable :( PLZ HELP

I tried following cyanogen wiki on an Inspire 4G. It didn't work and gave "Incorrect Model ID" error.
So I switched to use Hack-Ace tool. Everything worked as expected and I guess I was going good. When Hack-Ace completed, the phone went into an infinite look showing HTC logo then blind to a black screen with background light ON.
I could ADB and reboot in bootloader where I clashed the CM7 ROM. Every step went through fine and it restarted. Now all I get is nothing.
The device shows the HTC Logo on white screen after leaving a while and the vibrator is ON constantly. It doesn't help really but keeps doing that. It will only stop if I remove battery.
Plugging the device into USB doesn't detect on PC.
When tried charging, it shows the error messages and nothing happens, no buttons interact.
I guess I have a full brickd phone now

Have you tried flashing stock ruu thru bootloader
Sent from my Inspire 4G using XDA App

Download and flash this thru bootloader.
http://www.megaupload.com/?d=Q6YYQFIM
Sent from my Inspire 4G using XDA App

Yah, try the ruu. Seeing how it at least turns on means it might be fixable. Can you get into recovery?
Sent from my MB860 using XDA App

I'm trying the link given by creglem
stumpyz9, no man i've not been able to boot into recovery.. the device is doing nothing

kishu_27 said:
I'm trying the link given by creglem
stumpyz9, no man i've not been able to boot into recovery.. the device is doing nothing
Click to expand...
Click to collapse
The ruu will probably be your best bet then
Sent from my MB860 using XDA App

only if i could get it to install... i dunno what'll happen cuz i cannot go to recovery mode. i'm just going to try once
worst part is that this is a friend's phone

not able to open recovery
any other idea guys?

kishu_27 said:
only if i could get it to install... i dunno what'll happen cuz i cannot go to recovery mode. i'm just going to try once
worst part is that this is a friend's phone
Click to expand...
Click to collapse
http://webchat.freenode.net/?channels=#aahkSupport <--- go there to save said friends phone.

kishu_27 said:
not able to open recovery
any other idea guys?
Click to expand...
Click to collapse
You font nerd recovery with that file. Just out it on the root if your sdcard. Meaning not in any folder and boot into bootloader...not recovery then it will recognize the file then just follow onscreen instructions
Sent from my Inspire 4G using XDA App

kishu_27 said:
I tried following cyanogen wiki on an Inspire 4G. It didn't work and gave "Incorrect Model ID" error.
So I switched to use Hack-Ace tool. Everything worked as expected and I guess I was going good. When Hack-Ace completed, the phone went into an infinite look showing HTC logo then blind to a black screen with background light ON.
I could ADB and reboot in bootloader where I clashed the CM7 ROM. Every step went through fine and it restarted. Now all I get is nothing.
The device shows the HTC Logo on white screen after leaving a while and the vibrator is ON constantly. It doesn't help really but keeps doing that. It will only stop if I remove battery.
Plugging the device into USB doesn't detect on PC.
When tried charging, it shows the error messages and nothing happens, no buttons interact.
I guess I have a full brickd phone now
Click to expand...
Click to collapse
Dude download the PD98 file above it is the rooted updated gingerbread ROM. Place it in the root of your SD card (you will have to remove SD card and use adapter to move zip file to root of SD card if PC does not recognize phone with USB cable) and power phone off then power back up holding down power button and volume down button at same time. Phone should go to bootloader then it will recognize the PD98 zip file and ask if you want to istall. Volume up for yes and it will do its thing. No need to try to get into recover phone will do it itself with the PD98 zip file. Zip is (ATT ROM 2.47.502.7 w/Radio - 26.10.04.03_M)
Credit to Football