Droid2 stuck in boot Motorola sign took it to a verizon store to load the rsd.img to reset it and they say they can't because im rooted...I thought with the rsd it was possible?
Sent from my LiquidMetal using XDA App
Did they know you were rooted or did you tell them? Red lite is a program you run on your own from a computer
Sent from my DROID2 using XDA App
RSD not "red"
Sent from my DROID2 using XDA App
No I did not tell them about root...I tried rsd lite but I read they have not released the .img, for the OVA update released not to long ago
Sent from my LiquidMetal using XDA App
Find the 2.3.20 full sbf file and hook the phone up and flash it. As long as you get a bootloader screen or the like you can recover regardless of what's messed up, including the recovery.
If you could post more detail about what your phone is displaying when you turn it on, that would go a long way to helping you out further
kp432 said:
No I did not tell them about root...I tried rsd lite but I read they have not released the .img, for the OVA update released not to long ago
Sent from my LiquidMetal using XDA App
Click to expand...
Click to collapse
TBH did not release the sbf for the unofficial OTA to GB, if you broke it you have to flash back to Froyo and start over using the 2.3.20, especially if you installed the version with the bad recovery (released on accident). Slide your keyboard out and power it on while holding the UP arrow, it should load up the bootloader screen and then you can connect to RSD lite and flash away. Make sure after you flash you fire up the stock recovery and do a factory reset (hold x till the android guy and triangle appear, then press the search button on the keyboard), sometimes the phone will bootloop otherwise after a flash.
I was still running froyo, never upgraded in any way to GB. Downloaded RSD lite 4.9, and updated my drivers. The sbf file i used was 2.3.20, the RSD could never find my phone. I tried to run as Administrator but can't figure out how to do it, I've tried every way. Running Vista on Desktop, and 7 on laptop. Still no luck.
the phone will not charge at all, I have to use a separate battery charger. If I press the power button the Moto Sign comes on and stays froze at this screen, until battery is pulled. I can get into the phones stock recovery, (power+x), I have wiped and reset, but just to get the Moto sign froze again. Several attempts on that one. Once battery is charged enough, I can connect with USB (power+up), to RSD lite. But RSD will not find phone. That's when I read that they haven't released the sbf file I need for the last OVA update, before the GB OVA update.
Thanks
kp432 said:
I was still running froyo, never upgraded in any way to GB. Downloaded RSD lite 4.9, and updated my drivers. The sbf file i used was 2.3.20, the RSD could never find my phone. I tried to run as Administrator but can't figure out how to do it, I've tried every way. Running Vista on Desktop, and 7 on laptop. Still no luck.
the phone will not charge at all, I have to use a separate battery charger. If I press the power button the Moto Sign comes on and stays froze at this screen, until battery is pulled. I can get into the phones stock recovery, (power+x), I have wiped and reset, but just to get the Moto sign froze again. Several attempts on that one. Once battery is charged enough, I can connect with USB (power+up), to RSD lite. But RSD will not find phone. That's when I read that they haven't released the sbf file I need for the last OVA update, before the GB OVA update.
Thanks
Click to expand...
Click to collapse
First go here http://www.mydroidworld.com/forums/...rld-present-droid-2-2-3-20-triple-threat.html
down load the drivers for Moto connect (more like the reason RSDLite wont see your phone)
make sure you have either RSDlite 4.8 or 4.9
download the 2.3.2 sbf file
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF
Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete.
Ill try tonight but I can't turn on pc mode the phone wont turn on ill try with usb on
Thanks
Sent from my LiquidMetal using XDA App
Here is an in-depth guide for how to SBF. Use the link posted above to download the SBF file.
http://forum.xda-developers.com/showthread.php?t=770224
Please keep questions in the general section and don't post them in the development section. The helpers will help you quicker and the development section stays cleaner.
Sent from my DROID2 using XDA App
Related
Hey guys. So I was flashing the new fission rom on my droid 2 today and after the backup was created and everything else was set, when the phone was rebooting, it just got stuck on the motorola boot logo. I have tried pulling the battery out and everything and all I get is the same boot logo. Is there anyway I can get into recovery mode?
any ideas on how to get the phone to boot propertly? :/
Are you holding X while powering on? This will get you into stock recovery. If you can get to that, try wiping data and cache and rebooting. If not, you might have to SBF:
SBF Guide:
http://forum.xda-developers.com/showthread.php?t=770224
SBF Download (download in guide doesn't work. You can find it here):
hxxp://www.mydroidworld.com/forums/droid-2-discussion/5323-tbh-mydroidworld-present-droid-2-2-3-20-triple-threat.html (replace xx with tt)
ALWAYS be sure to wipe data and cache when flashing a new ROM.
Hope this helps and you get your phone working.
If you get to the boot animation, pull the battery in the middle of it and when you reboot it will go into clockwork. If not, you will have to use an sbf
Sent from my DROID2 using XDA App
Also try holding the X button down on keyboard and hold down power also till motorola logo pops up.
Then hit the search key below X.
Wipe data and cache.
Good to go. Happens to me all the time when reflashing after a SBF.
alright. i'll give the sbf a try. and i did try holding down X. I got to that menu, wiped cache and data and i'm still stuck at that logo.
i got everyting to work but the final step. when i am about to flash the sbf on rsd lite, i locate it and everything, but the program won't let me click start in order to begin flashing. any ideas?
Did you click on your device in the list at the bottom?
-Gilgamesh- said:
Did you click on your device in the list at the bottom?
Click to expand...
Click to collapse
Also be sure you are using rsdlite 4.8 or 4.9
Sent from my ultra fast Liberated Droid 2
by click do you mean highlight? yeah i did. the start button is still faded out. i am also running rsd lite 4.9 :/
If you are on windows 7, you have to run rsd as admin. or your device won't show up.
Sent from my DROID2 using XDA Premium App
Did you make sure and wipe? I've had the same issue after not wiping. Try wipe and reinstall and see if it works
Sent from my DROID PRO using Tapatalk
Do you have your phone in recovery when you are trying to SBF? If so that may be your problem. You need to have it on the bootloader. You get to it by pressing up when you turn the phone on. It should go straight in, you shouldn't even see the moto symbol.
got the problem fixed! thank you all for your help. it was the windows 7 admin problem. Just did it off my media center xp desktop, worked like a charm. and yes i was in bootloader mode.
thank you again!
Congradulations! Glad to hear ya got it fixed.
Awesome! Glad your up and running.
Sent from my ultra fast Liberated Droid 2
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Have you tried to take out your SD card and reboot the phone again?
I was hit with same issue last time due to a bad SD card.
Alternatively you can try to reflash without a SD card.
yes, i've tried both ways, but no luck either way?
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
mchlbenner said:
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
natifan81 said:
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Click to expand...
Click to collapse
..........
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
I haye to say this but your phone is bri cked dam can you get into bootloader.
Sent from my Milestone using XDA Premium App
Yes i can get it to bootloader mode, and i've tried to flash it back to stock Cincinnati Bell Rom, but when it completes the tasks it reboots phone and is still getting stuck on M logo Screen??
natifan81 said:
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
Click to expand...
Click to collapse
exactly the same thing happened to me...
I flashed froyo, was playing a few hours, and after firing flash phone was frozen and then I got bootloop
I was flashing phone with many different sbf's and nothing helped except official moto service center...
Use RSD lite above 4.9 Version, Download a sbf file for xt-720,go to boot loader and run the sbf file from Rsd lite. Your phone should start working.
if you are able to reach openrecovery, or some other way to access the phone internals,You may turn adb debugging during boot.
So if you have somewhat access to the phone to turn on ad debuging you have to
kill the usbd process ( pkill usbd if busybox is new enough)
then
Code:
echo "msc_adb" > /dev/usb_device_mode
You have to "integrate" that in your startup scripts.
Then issue "adb logcat" . The adb will wait for the phone and will start logging as soon as possible . When that happens, we will be able to adb shell to the phone, even if the display show just some static logo...
If you are not able to access the phone internals, other possibility exists, but requires to be able to fastboot the phone. Then custom initramfs can be prepared, which will include the above early adb enabling .
enabling adb taked from here:
http://code.google.com/p/cyanogenmo...e=update-adb_during_boot_enabler.zip&can=2&q=
have in mind of this issues (not a big deal, at least for me)
http://code.google.com/p/cyanogenmo...atus Priority Version Summary Stars&start=100
hey guys,ive been using motorola defy since two months and its working sweet.
i installed cyanogenmod 7 r1.5 aka gingerbread 2.3.5 on my defy and after sometime i by mistake wiped of the data/factory reset from my stock recovery.
now my phone wont boot and when i plug it on charging,it shows a battery with ? sign :/ ivetried booting miui then,but it still wont work.phone aint even flashing sbf using rsd lite.help me?!
p.s ive got a backup of stock 2.2.2 via titanium backup,but i guess its of no use until youve got the titanium backup app?
Locate your original ROM from here. Download it, DL RSD Lite and latest Moto drivers.
Enter into Bootloader mode (Vol+ + Pwr button), plug your phone to the PC and via RSD Lite flash original SBF file (you can flash Froyo 2.2.2 CEE).
First of all. Tell me while goin through bootlader menu are you getting error "battery low cannot program". Den u will br needing the stock froyo sbf india realease, its up in a post by me in development section. And first u ve to do mcgavee method, or try to charge ur phone with a wall charger or get a battery from someone.. if u need help nd from india call or text me on 08447224336, i ve just solved this problem 2 days ago
Sent from my MB525 using XDA App
i got a new sd card today, i put openrecovery and cm7 on the card, when i restarted, my phone got stuck at the M logo and i cant even boot into openrecovery now! and my pc wot detect the phone, plz plz plz help me
What sbf are you using.
Example if your using sbf mod you need to also move your update zip for open recovery.
If your regular sbf you should beable to boot.
Sent from my SGH-T759 using xda premium
i tried to go from cincenatti bell 2.2 to cm7, i wasnt running a sbf, i dont even have the update.zip package, but now the screen wont even turn on, itll just show the led lights! i really need help
When you went to cm7 you should whiped all.
Sent from my SGH-T759 using xda premium
i did, and i wiped the cache and dalvick cache, any way to fix my phone?!
did you try to flash it back with RSD lite?
my pc wont detect my phone
do i need my phone to rsd lite it or can i use my sd card and then put it in my phone???
iblakejames said:
do i need my phone to rsd lite it or can i use my sd card and then put it in my phone???
Click to expand...
Click to collapse
no you can't rsd lite a sd card , you rsd lite a motorola phone . Did you download moto driver helper ?
nikctsh said:
no you can't rsd lite a sd card , you rsd lite a motorola phone . Did you download moto driver helper ?
Click to expand...
Click to collapse
i watched a video on it, everytime i get it into bootloader mode it will automatticly turn off, but im charging my phone now so i will try in about another hour
my phone wont charge so the bootloader wont work, any suggestions?
Make sure you have debugging on.
Settings/applications/development.
If you contnue to have problems try these.
1. Restall rds llite.
2.reinstall moto drivers.
Sent from my SGH-T759 using xda premium
i cant bc my phone wont boot! ive already said that
im talking about bc its stuck on the M logo so it wont charge
does it automatically boot till the M logo if you plug it on to the power cable?
I've the same problem here. In my case, when I plug in the cable it doesn't boot.
If it's powered on it show the M., Open Recovery is not accessible. If I power it on while pressing Volume up, the power and the camera button it says "Bootloader
80.89"
What did you try to install
Sent from my SGH-T759 using xda premium
Get an external battery charger n charge it up..
It's happened to me a few times while trying to rsd lite.. It works once it's fully charged..
ATB
Sent from my XT 1 Turbo
Good idea harley
Sent from my XT720 using xda premium
external battery charger? what do you mean?
I tried rooting my phone and used this website tutorial http://forum.xda-developers.com/showthread.php?t=2449705
I got to step 3 and when i tried starting up again it went to a screen that says "Please wait, this may take a few minutes."
here i am 5 hours later staring at the same screen. I have tried hard resetting my phone by shutting it down, holding vol- and vol+ and power, selected recovery, held down power and vol+ at dead android screen, and selected clear data/factory reset. Now that ive done that im thinking it might of been a bad idea...hope im wrong,
Is there anything i can do?
Were you on 4.4? That utility you linked is outdated and doesn't work on 4.4. Step 3 in the utility flashes back to 4.1.2, that's where it went wrong. You shouldn't be bricked, but you need to use RSD or Samuri's FXZ to restore back to stock.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
Were you on 4.4? That utility you linked is outdated and doesn't work on 4.4. Step 3 in the utility flashes back to 4.1.2, that's where it went wrong. You shouldn't be bricked, but you need to use RSD or Samuri's FXZ to restore back to stock.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Second this. You need to obtain the stock image and use RSD lite to flash it. I would highly doubt anything else will work.