Ok, so since i cannot post this issue to the Developer page yet, is anyone else having an issue tethering with cyanogenMod 9?
I have a Xoom 4G/LTE.
I just flashed with ROM update-cm-9-20120518-NIGHTLY-stingray-signed.zip, and went to test out my tethering.
Low and behold, when I attempt to tether (Wi-Fi/Bluetooth(unable to test USB due to running MacBook Pro)) it connects to the device, but will not share the internet connection. I looked on the developer forum and could not locate the issue.
Is there anything i overlooked or is this issue being worked on?
****EDIT****
I also noticed when connected to the network, when i would go to look at my connection status, it would not display the Wi-Fi connection
Related
Does anyone else have this problem?
My laptop will stay connected for a maybe a minute at a time, sometimes just a few seconds and I have to reconnect. Under Wireless Network Connection, the network is listed as "On Demand", if that helps.
I've tried every version of "Wireless Tether for Root Users" I can find and they all have the same problem. Is there anyway to stay connected?
Is it possible that your computer won't let you connect to an Ad-hoc connection? Maybe as soon as it realizes what it's connecting to it jumps off?
Havent had a problem, are you using the administration portion of wireless thether, you might have to just confirm the connection on the phone and apply the settings, you should have a green sheild when on your phone when a allowed device is connected
As far as I know ad hoc networks are allowed, I am using windows xp.
I have access control on and my laptop is allowed and connects fine, it just will not stay connected.
I am using a Toshiba nb205 netbook with windows xp.
On the Choose a Wireless Network window, next to G1Tether it says "On Demand" instead of Manual or Automatic. I've never seen that before.
I'm using the internet fine, I just have to reconnect every 30 seconds or so. Perhaps my google skills are too weak, but I cannot find anything, any help is very much appreciated.
Can you connect to a wifi network from the phone and stay connected?
Can you connect to a wifi network from the laptop and stay conencted?
"On Demand" is normal for Ad-Hoc Networks.
I had the same problem after upgrading from fresh 1.0 to 1.1 w/ gk-31. I uninstalled wireless tether and reinstalled it from my mybackup pro app backup (the one I made before flashing the new Rom and kernel. Works just fine now.
If I'm not mistaken I believe flipz included a newer version of wireless tether, maybe the old one works better.
I just realized I assumed you are using freshrom...
Might try reinstalling it anyways, let us know how it works out.
Reinstalling didn't work. I'll try out some roms tonight and see if they work any better, thanks anyways
Old post I know, but just wanted to see if anyone had any more ideas here. I don't think it's an android app issue at all, but rather windows. I'll be cruising along the highway with a fine connection, but as soon as windows picks up a random access point, it will jump off my ad-hoc connection and try to connect to the other one. not cool.
I upgraded my Captivate to Froyo. I have a few issues.
GPS - My GPS worked well after the official fix on 2.1. Now the GPS is crappy once more. Is there a way to fix this?
On occasion the phone turns off for no reason, even with a full battery and just lying around for a couple of hours. Is this a known fixable issue?
Tethering seems to be built in without extra software or rooting. I was able to connect my Windows 7 computer via USB and WiFi. However, the PC says "No connection to the Internet". I noticed that I can't use the Captivate's wifi conenction when it's also a wireless hotspot, but I do have a decent 3G connection. Any ideas?
Thanks much.
steveorg said:
I upgraded my Captivate to Froyo. I have a few issues.
GPS - My GPS worked well after the official fix on 2.1. Now the GPS is crappy once more. Is there a way to fix this?
On occasion the phone turns off for no reason, even with a full battery and just lying around for a couple of hours. Is this a known fixable issue?
Tethering seems to be built in without extra software or rooting. I was able to connect my Windows 7 computer via USB and WiFi. However, the PC says "No connection to the Internet". I noticed that I can't use the Captivate's wifi conenction when it's also a wireless hotspot, but I do have a decent 3G connection. Any ideas?
Thanks much.
Click to expand...
Click to collapse
Is the version of froyo you're running JI6? I had weird random shutdowns with that version too. I flashed Cog 2.3b6 (based on JJ4), which doesn't have the random shutdown issue, so I imagine it's a bug in the JI6 build.
If you go to settings>wireless>mobile AP, that will actually turn your phone into a mini wifi router that uses your phone's 3g connection for internet access. If you can't get your computer to connect to the internet through your phone, you might want to go over your settings again. I've only tested it once on JI6 and it seemed to work fine.
As for the GPS issue, sorry dude can't help you there. I'm one of the lucky few that has a captivate with a well functioning GPS, stock JF6 through Cog 2.3b6. The only thing I could suggest is to try a different rom :\
I just upgraded my router to a wireless one. Firstly, it's connected via ethernet to a PC and it is happily getting internet access.
On my i5500 I get a strong wifi signal. Wifi Analyser shows the signal at max constantly. I can also connect with Gmote and it works just fine.
The problem is that I can't actually access the net at all from the phone.
So basically I know that my phone is talking to the router with no problem. It's just getting out onto the internet.
Does anyone know of a solution?
try logging into your router and change the broadcast channel to something else and test it again. it should be something like a/b/g mode... define a single channel and see if it works.
I had originally thought that was working. It did for the first few minute where I had connection but then it just dropped.
I have noticed that I have some very small bursts where I can connect.
Do you think that trying the different channels may be the solution?
I have the same problem. Have you found a solution?
Still no solution. I went through every channel and every encryption method.
So far I've found that having the channel set on 'Auto' and then disabling encryption seems to give me internet connection through WIFI for at least the initial period but it eventually drops. But that's also not always.
I've also Googled it to death and found nothing. If you do find the solution please post it here and I'll do the same.
Maybe we can help each other.
make sure you entered the right password of wlan.
use a pc to connect the router and in the wlan you'll find the password.
Ok, just to clarify. My phone connects to the Router via WLAN. In fact I can use Gmote to control my PC. So the WLAN connection is great.
The problem is accessing the internet when using that connection.
I had similar problems with a router last year. I resolved the issues by flashing DD-WRT firmware. The manufacturer's firmware was junk.
Sent from my ADR6300 using XDA App
I had that idea but they don't have firmware for my router yet. I have asked them if they intend to make one.
Any chance the firewall on your phone is blocking your browser from using the Wifi?
Sent from my DInc via XDA App
I have no firewall on my phone.
Ok I've tried some new stuff and they I've had the longest connectivity so far (which is about half an hour).
First I made sure my Wifi wasn't set to turn off when the screen goes to sleep. Second, according to a forum I read, Netgear recommends channel 7. If that channels doesn't work try 1,3,6,9,11,13.
I then disabled encryption.
Fortunately no one near me uses Wifi at all and I've got the kind of walls that stop the signal from getting outside.
Anyway. It's working so far but I'll monitor and report.
[edit] And I forgot. The router was checking for firmware but it wasn't actually finding so I downloaded it myself. Seems that also made a difference.
Ok. I can confirm after 2 and a half hours my internet connection is stable. I even left half way through and when I came back it connected perfectly.
So as a summary here's what I did:
1) Get latest firmware
2) Change channel to 7
3) Disable encryption
I will change encryption and see if it still works
At work we installed a new WiFi router a few months back. The connection is open and no one needs a password to connect to it. But many who bought android phones recently arent able to connect to it. I have a OnePlus One with android 4.4.4 which doesnt connect to the WiFi. My colleagues own Xiaomi, Motorola phones which they bought recently, which also doesnt connect to the internet.
The phones detect the WiFi signal, says the network is saved but fails to connect to it no matter what. The temporary solution is to make our laptop into a WiFi router and use it but this is seriously annoying. The router is from HP and I dont know the exam model number for it at the moment
I will be grateful if someone can find any solution for this problem. Also, I am a novice when it comes to gadgets so, if your suggestion is to manually set up my WiFi settings please do so with clear instructions or a video of some sort. However I will be happy if this problem gets solved in a straightforward manner.
Please help!
XDA Visitor said:
At work we installed a new WiFi router a few months back. The connection is open and no one needs a password to connect to it. But many who bought android phones recently arent able to connect to it. I have a OnePlus One with android 4.4.4 which doesnt connect to the WiFi. My colleagues own Xiaomi, Motorola phones which they bought recently, which also doesnt connect to the internet.
The phones detect the WiFi signal, says the network is saved but fails to connect to it no matter what. The temporary solution is to make our laptop into a WiFi router and use it but this is seriously annoying. The router is from HP and I dont know the exam model number for it at the moment
I will be grateful if someone can find any solution for this problem. Also, I am a novice when it comes to gadgets so, if your suggestion is to manually set up my WiFi settings please do so with clear instructions or a video of some sort. However I will be happy if this problem gets solved in a straightforward manner.
Please help!
Click to expand...
Click to collapse
No need to configure wifi on your device IMO.
Sounds like an issue with the wifi router.
To check an fix the internet settings of the wifi router, you will need the adminstrative access/console/password for the router.
Then you can check that all new devices afre allowed to connect. On some routers you can restrict the access to a list of known devices or by enabling a MAC address filtering.
If you find such options on the HP wifi router, disable it and restart the wifi.
And make sure that the SSID of the wifi network is visible (= not hidden). Some Android devices have issue connecting to hidden networks.
Thread closed. Thank you.
Hi,
I have recently (last week) joined the OnePlus party by getting myself the 7 Pro after being with Samsung since the S2 days.
I like the phone but there are a few issues I am having.
The main issue I am having is the Bluetooth Tethering. I need this for when I am in my car (Mercedes use this method for internet connectivity). I switch it on and try to connect but after a while it just tells me that the data connection is temporarily unavailable. My mobile data works fine so I'm assuming that isn't the issue. When I am parked on my drive and in range of my home WiFi and I try and connect the connection is successful. It is as if the phone is blocking the mobile data connection when accessing via bluetooth tethering. This wasn't an issue on my Note 9 using the same SIM.
Does anybody have a fix for this or are having similar issues? If this cannot work then it is a deal breaker for me and I'll be reluctantly returning the phone to Amazon.
On a side note I have even tried changing the dun status via ADB Shell after finding what was supposed fix online but it did not help.
Thanks
I am no Bluetooth expert, and it may not apply here, but there are a number of various Bluetooth settings that can be altered in the Developers setting. Maybe something there can help???
Hi Jaseman,
I shall look into that. Currently doing a full backup of the phone to my PC before doing a downgrade from Android 10 to 9. I'm hearing that 10 is buggy so I'm hoping that is the culprit.
Thank you for your reply.