Related
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.
Had You try flash via SD Card?
erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.
Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.
HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....
...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...
Anyone with a clue on this? is this phone bricked then...
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.
Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?
...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
How about flashing official ROM via microSD card?
patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse
Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
Hello
I apologize in advance for my English
I need advice if I could revive my HTC. If you want to get to the boot loader (camera + reset) to get there. The buttons seem to be ok but the system does not respond and get into the boot loader.
Even I can do hard reset.
When the system loads the WM so badly I calibrated the display so it is unlocked.
Do you know any trick how I could convince the system to get into boot loader and can load a new flash?
R 1.59.46.12
G 25.89.30.08W
D 3.15 Exxon
to get enter bootloader mode on your device, look at http://forum.xda-developers.com/showpost.php?p=2922211&postcount=2
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
gushpitz said:
Have same problem but with android installed. The camera button pressed wit soft reset dosen't work. Any other solution to enter in bootloader?
Thanks.
Click to expand...
Click to collapse
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Hakim Rahman said:
to get bootloader mode simply by pressing the camera key, and then use the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears
Click to expand...
Click to collapse
Thanks. I get that, but it's not working.
gushpitz said:
Thanks. I get that, but it's not working.
Click to expand...
Click to collapse
Problem solved. The photo camera button was not working properly. Now its working.
I have searched the forum but no luck on this one.
When I Press Power and Down Vol HTC One S just reboots - it does not go into Bootloader menu.
I cant take the battery out as suggested elsewhere because battery is non-removable.
Fast Boot is Off in the Power Menu.
Any suggestions ?
zobojoe said:
I have searched the forum but no luck on this one.
When I Press Power and Down Vol HTC One S just reboots - it does not go into Bootloader menu.
I cant take the battery out as suggested elsewhere because battery is non-removable.
Fast Boot is Off in the Power Menu.
Any suggestions ?
Click to expand...
Click to collapse
Go to terminal Emulator and type "su" and then "reboot download".
Thanks for this.
I'm not rooted so I cant do su in Terminal Emulator
Can I do ...
adb reboot download
from Mac instead ?
Can you explain what this does ?
zobojoe said:
Thanks for this.
I'm not rooted so I cant do su in Terminal Emulator
Can I do ...
adb reboot download
from Mac instead ?
Can you explain what this does ?
Click to expand...
Click to collapse
Hi,
maybe you can use the ADB to get in the bootloader.
just look onto this HERE
the text there is english because i've only the german explaining and so i don' need to translate it.
EDIT: Finally got into bootloader by connecting phone to a PC with USB Debugging enabled and entering "adb reboot bootloader" in console.
Hi zobojoe, any luck with getting to the bootloader? I have HTC One S imported from Germany with T-Mobile branding and I want to get rid of that branding by flashing the stock ROM but can't get in to the bootloader same as you. What version of phone do you have?
Hi guys i've search the xda maybe this could help you to get the debranding off and get root acess on the phone i don't testing it because i've only the HTC sensation
TUT
Hope i can help you
dagger780 said:
Hi guys i've search the xda maybe this could help you to get the debranding off and get root acess on the phone i don't testing it because i've only the HTC sensation
TUT
Hope i can help you
Click to expand...
Click to collapse
Hey, thank's for trying to help! I've seen the thread you posted before - used it to get CWM and root but I've spent last 3 hours trying to get the stock ROM in my phone (I really hate the T-mobile branding) and nothing worked. What I did was I downloaded RUU_Ville_U_HTC_Europe_1.53.401.2_Radio_0.15.31501 S.19_10.12.31501S.06L_release_251412_signed.exe and tried to flash that using RUU. It didn't let me. So I at least got the zip file from the exe (temp method) and tried to flash that in CWM but id didn't work either (probably because it was not signed). So I tried to extract the system.img and radio.img and pack it again in a new zip and sign it myself - didn't work either. Kinda stuck now. Help from someone familiar with packing ROMs would be highly appreciated. I can't be the only one trying to debrand my phone .
Maybe the bootloader is Not unlocked?
Sent from my Sensation using XDA
dagger780 said:
Maybe the bootloader is Not unlocked?
Sent from my Sensation using XDA
Click to expand...
Click to collapse
Yes it it. Before I unlocked it, the RUU update ended with error 170. After unlocking it RUU update started kinda flashing something, but then ended with black screen with HTC logo and then turned into RUU fail! red warning.
Hi Andrew SM
I too have been able to adb reboot into bootloader but can't understand why power + vol down just reboots the phone and not go into bootloader as it should ?
Is it the case that it is rebooting straight into recovery mode when I do power + vol down and then just boots ? - what should I normally expect to see when I boot into recovery mode ?
zobojoe said:
Hi Andrew SM
I too have been able to adb reboot into bootloader but can't understand why power + vol down just reboots the phone and not go into bootloader as it should ?
Is it the case that it is rebooting straight into recovery mode when I do power + vol down and then just boots ? - what should I normally expect to see when I boot into recovery mode ?
Click to expand...
Click to collapse
I don't think it is recovery - you would se a black screen with a phone icon in the midddle of it with stock recovery.
But I was able to get to bootloader with VOL DOWN + POWER finally after unlocking bootloader via htcdev.com (bootloader screen starts showing *** TAMPERED *** on the top, but that is normal). And you have to disable Fast boot in Settings -> Power of course.
Good luck!
Boot loader
Little late to the party, but I've found the best way to get into boot loader wiht any consistency is to hold the volume down and power button for five seconds or so, then let go of the power button (while holding volume down), then tapping the power button. Boot loader should pop up
Hope this helps!
Brilliant! Worked perfectly! Thanks very much.
no99sqrd said:
Little late to the party, but I've found the best way to get into boot loader wiht any consistency is to hold the volume down and power button for five seconds or so, then let go of the power button (while holding volume down), then tapping the power button. Boot loader should pop up
Hope this helps!
Click to expand...
Click to collapse
BOOM this saved the day, thANKS!!
no99sqrd said:
Little late to the party, but I've found the best way to get into boot loader wiht any consistency is to hold the volume down and power button for five seconds or so, then let go of the power button (while holding volume down), then tapping the power button. Boot loader should pop up
Hope this helps!
Click to expand...
Click to collapse
Thanks for this!
Was right before going into rage-mode. But luckily I found your post.
AndrewSM said:
EDIT: Finally got into bootloader by connecting phone to a PC with USB Debugging enabled and entering "adb reboot bootloader" in console.
Hi zobojoe, any luck with getting to the bootloader? I have HTC One S imported from Germany with T-Mobile branding and I want to get rid of that branding by flashing the stock ROM but can't get in to the bootloader same as you. What version of phone do you have?
Click to expand...
Click to collapse
I cannot enter the bootloader too, so I have follow your instruction and now I can enter inside bootloader. I was wondering why this was necessary.
Anyway I just have the massage : locked and NOT the TAMPERED advice.
Anyway I will wait to unlock my one s, I wanna see if a different unlock way from htcdev cames out because I do not wannt risk that the warranty could be void. Have anyone tried this: http://forum.xda-developers.com/showthread.php?t=1578908 ?
Thanks a lot for this trick! This works immediatly!
Another easy way to get into boot loader every time is :
1. power off phone
2. hold the volume down button ( until boot menu open )
3. press power button for about 2-3 seconds then let go
new developer need 10 posts in general discussion sry
Hi everyone,
I'm trying to flash a custom ROM, and every method requires me to unlock the bootloader via HTCdev, but I have two problems:
1) I can't boot into bootloader. When I hold power + volume-down, the phone boots into safe mode (I don't think that's normal right?). I took care of this by using adb and (adb reboot bootloader) to get into the bootloader.
2) When I'm in the bootloader, the power button (to make any selections) doesn't work. So I'm always stuck at the last screen that says "Unlock bootloader?" and I just have to select "yes" with the power button, but I simply can't!
Does anyone know how I can get the bootloader to work normally, or get my power button to work when I'm in fastboot?
Thanks in advance!
Did you get around this? I keep having the same issue!
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
todavchich said:
Did you get around this? I keep having the same issue!
Click to expand...
Click to collapse
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
Mile_zdr said:
Read the screen on your phone , you got to use volume up or volume down button to select yes or no , i think volume up is for yes and than press power
Click to expand...
Click to collapse
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Nicx59 said:
Maybe certain fastboot commands may help a little, if the power button is damaged. (Maybe take off the back cover and see if you can then push it down properly..)
And not exactly.
If I recall correctly,
vol down means moving down on the list
vol up means moving up on the list
& power button is 'select'
Click to expand...
Click to collapse
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Mile_zdr said:
i know , but we are talking about HTCdev see here http://i.imgur.com/wexUA3G.jpg
Click to expand...
Click to collapse
with power button you are selecting
-deleted-
Pleas help - same problem
Mile_zdr said:
-deleted-
Click to expand...
Click to collapse
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Berkaypkk said:
hi, was you able to fix the problem since i have the exact same problem and i am not able to accept to unlock the bootloader...
Click to expand...
Click to collapse
Did you have this screen on your phone?
Mile_zdr said:
Did you have this screen on your phone?
Click to expand...
Click to collapse
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Berkaypkk said:
Yep, exactly where i am stuck at, i can use the volume buttons down to move up and down but i cant use the power button to select ;(, i just dont get it, why does it work on normal use but not in bootloader, weird...
Click to expand...
Click to collapse
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Mile_zdr said:
When you are in that screen that i showed you, what happens when you press Volume up , does it select on the scree YES unlock the bootloader (may avoid you warranty) ? If yes it select's than press power button to continue... and you will unlock you bootloader if not i don't have anything else on my mind :/
Click to expand...
Click to collapse
Volume up works but the power button doesnt
I'm also stuck in this screen for the past week, I got this phone for free, but now I want to root it but I'm stuck in this screen. I've tried several tools like kgs1992utility, hasoon2000's utility, even the windroid tool for htc sensation, but somehow I simply cannot get passed this screen. Is there any adb commands to replace the power button to select?
only the volume down button works, but it works in the opposite way(ex volume down actually takes you up not down) -__-
cant finish power button will not select yes
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Hotrodanimal said:
I am having the exact same problem the power button suddenly will not work on yes but does on no WIERD and very FRUSTRATING
Click to expand...
Click to collapse
So I had the exact same issue. I pressed the power button and volume down together and the phone rebooted back into the bootloader, this time it says *** UNLOCKED*** at the top of the screen.
SF