Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
an exact thing happen to me.but i manage to get my pc to detect the phone by pressing power+volume up+home (i dont know what mode).odin detected my phone but the flashing stuck at setup connection..because it was not in downloading mode i guess...
same as above, help needed!
additional info: pc and odin detect phone bot not kies, on kies it keep saying connecting....and theres no display on the phone
same here wont do anything
same with me, my phone wont start even on download mode so you cannot use odin.. please help.
same case , i accidently pressed wrong phone version and my phone was 'bricked'
any help ?
Same happened here! Has anyone found a solution??
Edit: All right. Here's what I did:
1. Remove the battery from the Galaxy Ace
2. Connect the USB cable to the PC as well as the phone
3. Hold: volume down + home + power buttons all together and insert the battery while you're doing that (could be a bit tricky but it works)
4. Now you should be in download mode with "downloading" on your screen
5. Open up Odin v4.38 and flash your stock firmware (find it on samfirmware)
6. That's it! It should be fully working now (at least it did for me)
Tell me if it works for you guys!
its okay alr , i bring it to the service center it claims my motherboard spoil , it changed a new one for me
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
same thing happened to me.
did different methods to bring it to boot, even the two-prong diy to force to turn it on, still no go.
in the end, store replaced the device...with a bnew one of course.
Did anybody successfully revived bricked ACE??
Found expensive solution...
google "riff box samsung galaxy ace"
Samsung SGA revived
hey guys, i bricked my phone last april then the only solution to revive it is by replacing the motherboard or by using JTAG. btw JTAG support for samsung was released last May 12.
delete post
delete post
Galaxy Ace Bricket
i am also facing same situation..any update about please share
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
It just corrupts your motherboard
So a hardware issue can't be solved from home
Only option I guess is Service Center
Hope you have warranty
ROM Manager is a tricky tool
It hard bricks your phone if you do even a step wrong !
Ps ....Im just cautioning everyone so that it doesn't happen in future to others....
Sent from my Xperia Neo V using xda premium
dimethicone2k9 said:
@ramy.s - i tried what you did but still nothing happens.
@donomeoww - how much did it cost you for samsung to replace your motherboard? i know jtag can be an option to revive the unit but sadly the model is not yet supported, lucky for samsung s5570 though they already have jtag support on 1st week of april.
Click to expand...
Click to collapse
Hardbricked ace cost 0 .
sridharmane said:
Hey !
I was trying out the ROM Manager and was checking out the roms available in the list, i accidentally pressed a wrong model and my device was flashed...now my phone is hard bricked, it doesn't even switch on in any mode.
i cam across this link for Samsung Galaxy S
http://forum.xda-developers.com/showthread.php?t=838942
here he shows how to get the phone into download mode.
Wanted to know if the same procedure can be used for a Samsung Galaxy Ace ??
thanks in advance ...
Click to expand...
Click to collapse
reloading tar by odin:laugh:
Hi.
My friend tried to install rom for Samsung Galaxy Mini. At the middle of installation the phone turned off and the phone doesn't want to run at all.
What is the problem?
My brother tried to flash his own and the phone doesn't restarts anymore.
It only does a small and quick screen flash, repeatly.
I can set it to download mode, and ODIN software connects OK, but reflahsing does not resolve the problem.
Help needed also.
PS: Sorry for my english.
I am going to check this thread http://forum.xda-developers.com/showthread.php?t=1107331 tons of information!
Maybe reflashing with other recoveries solve something.
Its a half-brick
pls go on download mod. and reinstall new firmware,
AndroidHouse Team said:
pls go on download mod. and reinstall new firmware,
Click to expand...
Click to collapse
I can't go to Download Mode. The device doesn't run at all.
You have successfully bricked your device then!
(You should better take it to service)
Hi guys
I have posted this in the proper device section but no one has replied and I really need my tablet working again even if i return it back to the way it was with the stock firmware it came with. So sorry about this but I am getting desperate
The post is here: http://forum.xda-developers.com/galaxy-note-8-0/general/help-stuck-download-mode-t2959806
I have a GTN5120 Samsung Galaxy Note 8.0 and I am stuck in download mode and I cant get out of it, I have tried turning it on and selecting down volume button to restart the phone and it still reboots into download mode
please help
Hello
If someone can help me pls do it!!
I have tried to update my samsung S6 G920F model , ll looked ok , after odin rebooted my phone, and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck!!
I try Volum Up + Power + home button and none recovery menu
Pls help me
Download the lastest firmware for your phone on Samobile and flash it with odin in download mode (in "AP") .
Check the md5 to exclude a bad download.
That the only way to fix your situation.
Add me and call me on Skype when you can! Pls
Id: alb3rto2005
alb3rto2005 said:
Add me and call me on Skype when you can! Pls
Id: alb3rto2005
Click to expand...
Click to collapse
Follow -JFK- 's instructions bro. That should solve it.
Sent from my SM-G925F using Tapatalk
None results!! Nothing new?!
Try to flash the old firmware with odin that was with your s6 before....
You could not manage to flash tje firmware via ODIN? Any errors (cause you posted none)?
I have used almost a day to fix my phone.
This thread helped me.
http://forum.xda-developers.com/galaxy-s6/help/help-softbricked-device-t3087228
Firstly its says can't draw image '.jpg_draw_failed' then I google to solve it...then I found a way on Google.. I have to flash with OMAPF..after finished it start then stuck on Samsung logo...then I disconnect USB cable then trying to reboot after that suddenly I have black screen...won't even get on won't even get into recovery or download mode...I trying to flash using Odin but how to flash if my phone won't even getting into download mode...please help me....I have been googling for ages....help mee....I love my s2...and BTW 3 button won't work for me...pull the battery out and in doesn't work..using Omapf again also didn't work.... Thnks in advance.... and btw i already try that samsung 300K Tools but it seems doesnt repond and detect my phone....what else should i do next??
izulshah96 said:
Firstly its says can't draw image '.jpg_draw_failed' then I google to solve it...then I found a way on Google.. I have to flash with OMAPF..after finished it start then stuck on Samsung logo...then I disconnect USB cable then trying to reboot after that suddenly I have black screen...won't even get on won't even get into recovery or download mode...I trying to flash using Odin but how to flash if my phone won't even getting into download mode...please help me....I have been googling for ages....help mee....I love my s2...and BTW 3 button won't work for me...pull the battery out and in doesn't work..using Omapf again also didn't work.... Thnks in advance.... and btw i already try that samsung 300K Tools but it seems doesnt repond and detect my phone....what else should i do next??
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
please visit your device specific form for further information, especially the help section could be interesting to you...
https://forum.xda-developers.com/galaxy-s2/help
Good luck