Database Info

having trouble with push mail

I have upgraded a cingular branded 2125 to the imate ROM, i-mate_SP5_WWE_2.5.331.2.zip. After fixing the header file, the rom loaded easily. There has been a significant performance improvement over the stock cingular ROM. My issue is with push mail. I feel like I must be missing something. I have enabled the service on the comm manager, set active sync to get mail as it arrives, but alas, it doesn't work. The only way to get the mail is to manually initialize it or schedule it to retrieve every x minutes.
I have a Wizard which I have enabled AKU and it works like a charm.
I was trying to set up this phone for a co-worker...
Any thoughts on what to look for on this Faraday? I'm stumped.

If Direct Push is enabled on your co-worker's device, and Direct Push is working on your device, it is most likely an issue with the Exchange Server settings. There are a few things I can think of.
1. Is your co-worker on the same carrier as you? In the Global Settings, I believe there must be a Mobile Service configured for each carrier.
2. In Active Directory, Up-To-Date Notifications must be enabled on the Exchange Features tab of the user profile for your co-worker.
If you have the ability to watch active TCP/IP connections to your Exchange Server, check to see if your co-worker's device is maintaining a http/https connection.
If I think of anything else I'll post again.

artiemon said:
If Direct Push is enabled on your co-worker's device, and Direct Push is working on your device, it is most likely an issue with the Exchange Server settings. There are a few things I can think of.
1. Is your co-worker on the same carrier as you? In the Global Settings, I believe there must be a Mobile Service configured for each carrier.
2. In Active Directory, Up-To-Date Notifications must be enabled on the Exchange Features tab of the user profile for your co-worker.
If you have the ability to watch active TCP/IP connections to your Exchange Server, check to see if your co-worker's device is maintaining a http/https connection.
If I think of anything else I'll post again.
Click to expand...
Click to collapse
Ooops - Scratch #1, I think that is only for SMTP and text message notifications, not Direct Push.

Thanks, but it is the same exchange server, just different email addresses.
Glad mine is working, but I'm stumped why I can't get his to. I was thinking of reflashing his phone, but everything else seems to work just fine...

I'm an ID10T...Thanks for suggestion #s 2+3...I'll check them this morning.
Cheers!

Exchange Security

anyone know how to disable the Exchange lock screen if it's enforced by the security policy?
i know lockpicker does this for Sense handsets (DInc, etc) but it doesnt work on moto X

Connecting Infuse to Microsoft Exchange Server....Help!

Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?

Looks like u have it set ok. I have to do [email protected]/password and run it multiple times to get it to sync the first time. Keep trying its not perfect at all. You can also try droidmail if u still can't get it

Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
I would ask your IT dept. for the exact server information to be sure you are inputting the correct server info. Everything else is good to go in your setup so it has to be the server name is not correct causing the failed connection.

Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
Take out the domain setup all together.
I run SBS 2003 and you do not need to set up the domain. I run the following on dozens of phones.......
Domain/Username (must be exact usually with no spaces)
Password (case sensitive)
Exchange Server (mail.yourcompany.com)
uncheck Use secure connection (You can check it later if you wish after you have it working)
Hope this helps! If so please hit the thanks button for me!

For the exchange server try using the IP address of the server. This is the only way I could get mine to work.

This sounds silly, but have you ever connected another phone to this server? That setting isn't always available. Also, I've found the / or \ can make a huge difference. Also, check to make sure you are using the primary email account and not a secondary alias for the username. The email address can be an alias but username has to be the actual NT username. Hope that helps!
Sent from my SAMSUNG-SGH-I997 using XDA App

Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.

Blackberrynomore said:
Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.
Click to expand...
Click to collapse
I use SBS2003 and do not have the domain name. User name only. (the domain username though) Been working for years that way. mail server is the important one to have the domain address correct in. mail.xxxxxxx.com
If I put the domain name in front of the username it does not connect.....

I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.

madpb said:
I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.
Click to expand...
Click to collapse
Mine is doing the exact same thing. I loose the external SD card and I get it back if I remove the exchange account.
Any ideas??
I still cannot figure out why I loose my external SD card.I have re imaged the phone, changed sd-cards.. no fix in sight

[Q] Active Synch Bug

I have this very annoying bug in Windows Phone 7. I wonder if anyone has any kind of work around for this:
"
Reverse proxy configured to use Certificate Based Authentication for Exchange Activesync
Exchange CAS servers configured for Basic Authentication for Exchange Activesync
The users can synchronize when the connection is first setup but after a while the device stops presenting
basic authentication credentials to the Exchange CAS server and starts prompting for username/password continuously.
"
Thank you very much.

Phone can't connect to school internet

My droid maxx can't connect to my school internet. the wifi uses 802.1x eap security withmschapv2 for phase 2 authentication. Every time i enter my identity and password i get an authentication error. Any thoughts?

You may have to manually create a new connection instead of just accepting whatever the default is (meaning you just pick the network from the list of available ones. Those other forms of encryption and 2-factor authentication usually require manually creating the connection info and then saving it for it to be functional. Pics attached.
Give that a shot and see what happens.

Beeeaaast said:
My droid maxx can't connect to my school internet. the wifi uses 802.1x eap security withmschapv2 for phase 2 authentication. Every time i enter my identity and password i get an authentication error. Any thoughts?
Click to expand...
Click to collapse
Eduroam?
Sent from my XT1080 using Tapatalk