Caseless. So far so good. But I'm still paranoid about laying the phone face up. Haven't put the lens to the test and don't really want to be the first to find out how resistant it is to scratches.
Also, is the lens flush with the silver ring or does the ring give a tiny bit of clearance when laying the phone down? It's really hard to tell.
I always set my phone down face up with no case. I wouldn't want to hurt that beautiful screen! My camera lens sits inside the silver ring a tiny bit so i don't worry about it. Also just so you know, the camera doesn't sit flush to flat surfaces. The only thing really touching the surface it the outer ring.
so far so good, but got the Otterbox commuter to protect this beast. problem is I removed the case after the first day because it totally detracts from the form factor. I guess I'm gonna try and find a super slim case that also protects the camera lens like the Otterbox.
Related
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
Hello everybody,
I noteiced the HTC One S seems to lens itself to easily scratching the camera lens which is made of poly carbonate material I heard - which I believe to be very attractive to micro scratches.
I bought the phone second hand but since I got it I've always used a protective case which makes the camera no longer flush with a table or surface it's resting on.
Can anyone confirm if this will have a detrimental effect to photo quality / video quality?
Probably not, the lens cover will be too close to the lens for any of the micro scratches to actually be in focus/visible.
I just looked at my couple month old phone and see zero scratches. While the lens does protrude, the metal ring actually sticks out farther, so just resting it on a flat surface won't scratch it.
Oh man! I was wondering what material was used on the camera lens. Why couldn't it had been gorilla glass's corn whatever thing they use on the screen!? The HD7 had a lot of scratches on the camera. Surprisingly enough, none of that ever showed up on pics. I can't really tell the difference but maybe it could be clearer? Idk looks good for a phone's camera.
I don't want my baby's eye scratched up.
Recently applied bestskinsever.com front and back skins to my D850.
http://www.bestskinsever.com/lg-g3-skin
I ordered the glossy front and the matte rear. The glossy front keeps the phone looking exactly like it does from the factory. I ordered the matte rear because the phone does not have a glossy rear finish like many other smartphones. The matte rear goes very well with the "brushed metal" look of the back plate. It even creates a slight pearling/frosting effect with the white. I am happy with my choices.
Bestskinsever is such a better buy than the other brands...I got mine for $11.99 shipped to my door which is a fraction of what other brands charge for just the front! It comes in a flat envelope with instructions.
You need to make your own application solution out of water a dish soap, but that's not a huge deal at all. I won't really go into the whole installation process because there are tons of videos out there detailing how to install wet phone skins.
Front:
It is well made and is the same quality I have always expected from them. The cutouts for the camera, light, and motion sensors were perfectly positioned as well as the cutout for the speaker.
I was a bit apprehensive about the overall size of the front skin though. It was slightly smaller than the front of the phone on all four sides. I thought that as a result, it would be obvious that the phone has a skin on it since the skin wouldn't reach all the way to each edge.
My worries quickly subsided once I applied the skin to the phone though. Being slightly smaller made it easier to position the skin on the screen without the edges of the skin hanging over the sides of the phone...making them more susceptible to capturing dirt or peeling off. Once finished, it was an excellent fit. The only way you can tell this phone has a skin on the front is by looking closely at the camera/sensors where the skin has its cutouts. SATISFIED!
Back:
The back was a less pleasing experience. Yes, the cutouts for the laser sensor, camera, flash, buttons, and speaker are positioned perfectly. However, do you remember how the front was ever-so-slightly smaller than the actual front of the phone, which made installation easier? Well unfortunately, bestskinsever did not create the back piece this way. The piece is pretty much exactly the same size as the back plate of the phone.
Lining up the skin perfectly as intended with all the cutouts exactly in their places made it very difficult to keep the corners of the skin adhered. This is due to the curvature of the phone and was most prominent at the top corners. To combat this, I removed the skin and placed it slightly lower on the phone so the top edges would have a fighting chance of staying stuck down. I achieved a reasonable amount of success at the top of the phone, while keeping the cutouts reasonably in place.
The bottom of the phone definitely has a small amount of overhang as a result, which in my opinion is not as bad as the top corners were looking prior to re-positioning. I'm curious how the overhang is going to hold up over time. I'm anticipating that it will probably begin to collect grime/lint but we will see. Hopefully since it is the matte finish that anything it does collect will be less apparent. If I hear from bestskinsever that they will be revising the rear skin to make it slightly smaller like the front, I'll definitely pick one up.
You can see the imperfections at the top and bottom. I do love the slight pearling/frosting effect that it creates though.
is this just a clear vinyl wrap?
Yup, that's correct.
I have never been a fan of phone cases because they make the phone bulky and heavy. Plus I just like the way today's smartphones look...they are pretty lol.
Update on the skin after being installed for a few weeks now.
The front is still acceptable. The edges have stayed completely stuck down and there is no dirt starting to accumulate on any of the edges. When looking at it with the screen off at certain angles, you can see that there have been some imperfections that have developed randomly across the surface. I'm not sure what has caused them. They aren't scratches at all...more like indentations, but when rubbing your finger over the surface, it's still perfectly smooth.
The rear is a different story. Just like I predicted in my review of the back, the bottom edge that is overhanging has collected some dirt and grime. It has peeled away from the phone slightly as well. While the other there edges are staying adhered to the phone better, they are still accumulating grime and beginning to look dirty. Additionally, the large cutout for the buttons/camera is beginning to collect grime on the edges as well. The back of the phone doesn't look clean. Just seems kind of dingy.
Due to my dissatisfaction, I've ordered a Spigen Ultra Hybrid case (which will be arriving today). Definitely looking forward to peeling off the back skin and cleaning the phone. Liked this particular case because it has a clear polycarbonate back which should still allow the phone's "beauty" to show.
I'm glad bestskinsever gave me this skin for free just for writing a review, so I haven't really lost out on anything and I still have a decent screen protector.
Hi, I have a question about Spigen Liquid Crystal case. I would like to know if the dotted pattern doesn't scratch or leave marks on the glass back panel after some time using it. Thank you
Any dirt between case and phone will eventually cause it to scratch, I had to threaten legal action to get my glass replaced due to the s-view case damaging the screen, buy a rear protector so you have something physically stuck to the back glass that cannot move and take the damage instead of the phone.
scarlett24 said:
Hi, I have a question about Spigen Liquid Crystal case. I would like to know if the dotted pattern doesn't scratch or leave marks on the glass back panel after some time using it. Thank you
Click to expand...
Click to collapse
The dots will only be visible if you look at it from a certain angle. And no, the dots won't cause any damage/ visible marksto the phone's rear back.
GoNz0 and Rakcoon thank you for your help.
I have Spigen's transparent case on my phone.
It's been about 8 months.
The back of the case is horribly scratched up like hell.
The entire case itself has turned yellowish, which is normal for silicone and perfect for my golden S6.
The edges and sides of the case however turned reddish, you know like redhead women? Like that, however the colour change is not that prominent and it actually looks cool. It's visible only from certain angles though.
However, I use a blower to make sure to dust gets trapped in-between the back of my phone and the inside of the case, so I don't really have scratches on the back of my phone.
Protection wise? It's worth it, doesn't really add too much bulk, but it's good enough for protection from drops about 4 feet onto concrete floor. Get Nillkim's Amazing H+ tempered glass to protect the front, that's what I'm using on my S6.
Don't ask for photos of it, I'm too lazy to do that.
Hit the thanks button beneath this post if it was useful to you.
This review is of the Schnail Savior Series Clear Case with Aluminum Frame Military Grade Full Body Protective Rugged Cover in Black for the Google Pixel 4 XL.
Overall I really like this case. I have been using it for the last few days, and I have to say that I am surprised. I normally use Spigen, Caseology and Otterbox cases, but I really liked the overall appearance of this case and wanted to try it out.
When I first received it, it came in two main pieces. The outer frame, which is a combination of aluminum and TPU, and then a hard plastic inner frame. Assembly is pretty straight forward. Clean your phone really well, insert the phone into the plastic inner case, and then nest it into the aluminum and TPU outer case. You will want to get a small flat tool of some sort to help the lip of the TPU surround on the aluminum frame to clear the plastic inner frame. I wish that a tool had come with the phone in order to do so, but I found that a toothpick worked just fine. Once nested together completely, the case has a extremely solid feel. There is no movement like I have experienced before with other nesting phone cases. While this means it can be a pain to disassemble and reassemble, it also means that if you drop it the case isn't likely to come apart.
The quality construction and build seems to be on par if not better than other well known brands that I have owned and used in the past. The use of the aluminum frame is implemented nicely, which just the right amount of exposure, but not so much that it makes the case slippery. The clear backing is nice thick, and the lens cut out accents the raised camera lens very well. The lip provided by the aluminum frame and the rubber/plastic surround gives ample distance from the glass, which means should I accidentally drop the phone, it should avoid cracking the screen unless I happen to land directly on a sharp corner or raised object that strikes the screen directly. If there is one con to this case, it would be the raised lip, especially if you are using the new "swipe to go back" feature that Google has implemented in Android 10. You can still swipe to go back, but there is a bit of learning curve as you will need to press your finger into the edge of the lip before attempting to swipe. I use my thumb to do so, and found that if I attempt to use the edge/side of the my thumb, it doesn't work as well as if I press my thumb flush before swiping. A small sacrifice to make in order to ensure if I drop this phone that the raised edge will protect the screen from harm.
All in all, this is a case that I can highly recommend and will be my daily driver over my Spigen Tough Armor.
So I was sent this case for review as well, and if OP doesn't mind, I would like to 2nd a lot of what is said here.
The case is difficult to put on, but once the case is on I feel like I could throw it off my roof, and have it survive. Not that I actually did that... I had to use a butter knife to get the inner frame under that lip all the way around the front/top, but once the case was on, it felt very solid. Its difficult to disassemble so hypothetically a big drop shouldn't split the case in 2 like some other 2 piece cases have a tendency to do. If I had JerryRigEverything money, I would have loved to test it like that. The camera is well protected by raised edges, but not actually covered. The screen isn't covered either (like a lifeproof case), but I'm ok with that, it means I can bring my own glass screen protector.
As far as look and feel, it is a bit bulky, but thats the price you pay for this much protection. I like the clear back, since Google makes such a big deal about their colors, its nice to still see the back of my phone. The buttons line up properly, and are a little mushy, but nowhere near as bad as some other big cases. I might be the only one who appreciates the little loop holes on the bottom right of the case for adding a wrist strap or something. A Peak Design anchor is probably going to live there forever now. Wireless charging still works, but your mileage might vary, it does add a tiny bit of distance between the charger and the phone. Like OP, I also found the raised lip around the edge of the screen to be a bit annoying, especially since gestures is the new Pixel default. The gestures are harder to use, and there is a learning curve, or just go back to using the soft buttons at the bottom.
Overall, if a lot of protection is what you're looking for in a case, I have no problem recommending this one! Pictures to come, I just haven't had time to get out my real camera and take any.