Related
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
Hi guys;
Today I finally got my case for SGS!
And in start, I have to say that is great, even I had some issues with installation of this case.
I have ordered my case from ExportPrive online shop: SGP Ultra slider hard case for SGS, and because I didn't wan't to pay more for delivery it took almost 3 weeks to get my case.
With case I got one SGP STEINHEIL Crystal Clear screen protector and 4 small protectors for camera lens:
And just to mention, I mess up aplication of screen protector so I got two boubles .
But later I removed that screen protector, because it was sooooo fingerprints sensitive, that after 5 min of use, protector got so messy that it has become totally reflective and has affected viewing experience of phones screen. But it didn't effect sliding of fingers over screen; sliding was nice and smooth.
Installation of case was a bit tricky; at first I have applied additional protective stickers, but as I have realized, they affected positioning of phone inside case, so I wasn't able to close case properly. So I have to remove all those stickers and cut part of internal padding to make phone fit more nicely inside case:
After that I notice that bottom part of case didn't "click" on top part, or to be more exact, it did, but not enough to make a solid connection. So I use lighter to melt part of bottom case and made additional ridge, to make it connect better with top part:
But be VERY careful while doing this; this plastic is very sensitive to heat, so it melts very fast!
After that, case fit nicely, close nicely and remain solid and rigid.
Video:
youtube;wmYSbqu3W0A]http://www.youtube.com/watch?v=wmYSbqu3W0A
Over all, i'm happy with this case, and all this small issues ware something that I expected, so it didn't affect my overall impression of case.
But I'm disappointed with screen protector; those bubbles ware not a issue (i remove them with no problem later), but issue with fingerprints made this screen protector useless, because it affected screen visibility and look of phone, because it made fingerprints more pronounced.
So, for case, I'll give rating of 4/5, and for screen protector 2/5.
Yeah I also got this case from the same site, I must say I'm very pleased with this case and it seems that its very good for protecting it,
Thanks for the good review
Nice work, what ROM and clock is that ?
So this case is hard plastic no rubber to it?
If it is hard plastic when you drop it on impact wouldn't the case just break and absorb none of the impact unlike a rubber case
TieNN89 said:
So this case is hard plastic no rubber to it?
If it is hard plastic when you drop it on impact wouldn't the case just break and absorb none of the impact unlike a rubber case
Click to expand...
Click to collapse
If it breaks then it absorbed all of the impact.
@OP
I didnt have to burn anything on mine or cut the padding that was installed, its a pretty good casing but theres.
The only bad thing about the white casing is that when there are scratches at the back with in the camera hole ( horizontally from edge to edge ) its gonna show up like a black line, this is true for all colors except the black.
Hi all
got the edge plus with the clear view case now i have exactly the same issue with the smaller edge with little dots and a scratch on the screen.
contacted Samsung and they say their is nothing official for the Edge Plus so the chances are they will not replace the screen free of charge.
is anyone out their in the same boat as me, is their any official notification from Samsung covering the Edge Plus
Thanks
Same sh*t for me, my brother has the S6 edge and had this problem, and I bought the clear view cover for my edge+ thinking it was fixed, after 3 days, noticed few scratches when I was on sunlight, 2 weeks with the phone and already pissed out 'cause of stupid things like these...
Sent from my SM-G928F using XDA Free mobile app
I got this case but after reading about the issues with the S6 I only used it after installing a screen protector. I then noticed small pinpricks in the protector after using the case and I could even see the indentation of a circle where the magnet touches the screen. Fortunately most of the marks disappeared from the protector after a few days but it appears that they have not resolved this in the design. I also found that the back of the case itself scratches too easily - it is already showing several scratches even though I have been very careful in handling it. I am surprised they sell it as an official case given the known problems.
The clear view case is definitely one to stay away from. Although it added to the beauty of the phone, it just was not practical, offered no screen interaction when closed and over time I would imagine it would wear out quite quickly. Returned mine after 2 days (before any scratches set in) and opted for the official SView cover which gave me back the functionality that I was used to. Having had the original SView cover on my Note3, after 2 years of hard use it really protected my phone well. The case is in gold and looks better than I expected. Fingers crossed this new SView cover for my edge+ will hold up the same.
i have the clear view case for almost 2 weeks now and not a single scratch or dent visible; maybe you guys had some dust or smth in your pockets that went inbetween the case and the screen?
I had for few days the phone didn't scratch but the cover is completely scratched and it's just awful now ?
nulledapk.com said:
i have the clear view case for almost 2 weeks now and not a single scratch or dent visible; maybe you guys had some dust or smth in your pockets that went inbetween the case and the screen?
Click to expand...
Click to collapse
***** crumbs in the pockets, no doubt.
ShyamSasi said:
I had for few days the phone didn't scratch but the cover is completely scratched and it's just awful now
Click to expand...
Click to collapse
I've had my gold clearview case for a week and it's looking a little bit scratchy but nothing too serious.
I just wonder where people's expectations lie in these cases. Of course we don't expect to see scratches on the screen when there's a protective case over it but the case couldn't have caused the scratches. Previous S-View and flap cases were quite soft and spongy, these ones are tough so grit could easily get pressed against the glass. If anything, Samsung should provide a screen cover with the case. I use a plastic screen cover anyway because I find the bare glass too slippery at times.
As for scratches on the case itself, well that's what it's for! It takes the hit so your phone doesn't, and with a mirror finish you'll see some wear and tear. If you wanted a case that maintains its original appearance then don't pick mirror finish, clear hard shell or light colours - grab a dark silicone thing to wrap around your phone and it will look the same in 2 years as it did the day you bought it. Next we'll be seeing case protector films to keep the case from degrading!
yesBilly said:
***** crumbs in the pockets, no doubt.
I've had my gold clearview case for a week and it's looking a little bit scratchy but nothing too serious.
I just wonder where people's expectations lie in these cases. Of course we don't expect to see scratches on the screen when there's a protective case over it but the case couldn't have caused the scratches. Previous S-View and flap cases were quite soft and spongy, these ones are tough so grit could easily get pressed against the glass. If anything, Samsung should provide a screen cover with the case. I use a plastic screen cover anyway because I find the bare glass too slippery at times.
As for scratches on the case itself, well that's what it's for! It takes the hit so your phone doesn't, and with a mirror finish you'll see some wear and tear. If you wanted a case that maintains its original appearance then don't pick mirror finish, clear hard shell or light colours - grab a dark silicone thing to wrap around your phone and it will look the same in 2 years as it did the day you bought it. Next we'll be seeing case protector films to keep the case from degrading!
Click to expand...
Click to collapse
Mate,
I am a very careful user 1.5 years with M8 without any case and it still looks brand new. But a "Official Samsung case" I expect it to be a bit more durable and not prone to so much scratches and this case ain't cheap either. Now Clear case by Spigen no no scratches on the case or phone. I'm happy with the performance. I chose Clear view case from Samsung so I can take advantage of it's features.
I've bought the clear view case for my black S6E+ and I can confirm that it does indeed scratch the screen.
The first scratches appeared after something like 3 days of usage, so I've placed spigen ultra crystal to protect screen from further damage and to mask the spots.
I thought that maybe the reason was that I've carried the phone in the case in my pocket one day. But to my rage I've noticed that the case have damged the screen protector within 2-4 hours after applying it and this time there was no pocket to blame, I was home with my little girl sick so I've only moved the phone from one room to another always carrying it in the hand.
I've contaced Samsung Poland by their facebook account and they advised to report the problem to authorised service center in order to assess the damage, but I've let it go - I dont think they have much experience with replacing the screen in this particular device and I was afraid that the final effect may be in fact even worse.
So I replaced the Spigen with another one (~20$ went straight to the bin) and I stay away from the clear view case. At the beginning I was using S-View Cover (highly recommended) but I settled now with Rock TPU (way slimmer and better than Nillkin Nature or Spigen Liquid).
I've compared clear view cases for S6 and S6E+ and it is obviuos that they tried to improve the design by adding a kind of "lip" along the internal edge of the flap so I doesnt rest at the whole screen all the time. This means that the scratches will now be placed (as it was in my case) along the edges of the screen thus giving additional meaning to "S6 Edge"
It does have oleophobic coating and yes it seems to be able to heal minor scratches so thats a plus, but it really doesnt matter as long as the case meant to PROTECT the screen actually DAMAGES it.
Thanks for that. Im glad i went for the S-view instead, i had it on my Note 4 previously without a single scratch.
In UK Samsung acknowledged that clear view case causes scratches on s6 edge and they are replacing screens (only once) plus adding screen protector, wondering if its the same for s6edge+. Worth asking samsung helpline
Mine did it after just a few days. I hate flip covers anyway. But I can't un-scratch the screen.
Ugh...
Chiffon Method to avoid scratches
Chiffon method to avoid scratches
Here is something that came to my mind using Chiffon fabric to put inside the cover to protect the screen, if the screen is still prone to scratches after this, means that the screen is pure crap.
If you don't want to use the Chiffon one, pay attention not to use one made from plastic.
Material:
- A cut of Chiffon fabric, in Mexico costs 1 dolar per meter.
- Transaparent glue, the one used in school that is water washable, in case of error, it can be safely removed
PROCEDURE: (Very complex)
- Glue the fabric into the inside of the cover as you will see in the picture
That's it, is possible to use any mostly transparent fabric in cotton or polyester that is like Chiffon or better, I found this one here.
NOTE: The pictures are very bad quality, looking at the phone is mostly the same using the fabric compared to not using it.
NOTE 2: Inside the cover is mostly the same in black, the bad lighting where I shoot it creates that gray halos, is pure black and if you are a purist you can do it much better than me.
NOTE 3: "CON" mean WITH and "SIN" means Whithout
No offence but it looks really terrible...
pokosik said:
No offence but it looks really terrible...
Click to expand...
Click to collapse
I didn't want to be the first to say it! ?
It seems the S view cover scratched the S6. Im expecting the same with the Plus
Sent from my SM-N9005 using Tapatalk
I have skimmed through the pages in the other tempered glass screen protector threads. I have yet to find a manufacturer who makes an edge to edge protector that adheres to the entire screen rather than just the top and bottom.
My issue is that with a water proof device, anytime it is exposed to water (every day for me as I place it on the shelf in the shower to listen to music), water becomes trapped underneath the tempered glass.
Anyone picked up a model that would remedy this?
no one currently makes one
Why did you feel the need to open a whole new thread for something that has been discussed at length in many other threads? no, there is no solution yet.
Doesn't the official Samsung one do this ?
The official Samsung one is plastic, not glass.
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
which flat one did you get!
Sent from my SM-N930T using Tapatalk
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
I went nude screen on the explosive n7 because i knew i was going to exchange it and i only managed to get one scratch and it was on the edge. I think i know how it happened.
Be careful
BozQ said:
The official Samsung one is not tempered glass.
I strongly advice against getting curved tempered glass. Or any screen protector with curve protection.
I got my replacement Note 7 and I decided to just use a flat film protector and leave the sides exposed. So much easier to use this way.
Click to expand...
Click to collapse
It feels like **** though. I had an IQ Liquid Shield on my old Note 7, and it felt nice in the hand. Barely a bump in feeling, some around the edges but not really noticeable. This current new Note 7 has factory screen protectors, both front and back. But they feel sharp and edgy, they don't cover the curves. I have actual sleeping nightmares about applying a brand new IQ Liquid Shield protector I already have, and it peeling horribly at corners. fEa.r me..?
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
filthimoney said:
Yeah. So I got my replacement n7 today. Picked up a Qmadix "first defense" screen protector. Guess what? It's edge to edge and the adhesive goes all the way around the screen. Just got out of the shower (phone got soaked), no water under the glass.
There is no reason to be rude.. Obviously, the other threads "discussed at length" on the subject failed to stumble upon this gem.
Thanks everyone. I'm only 5 hours in but I have no complaints. No halo, sits flush. Thicker than the Verizon branded one I had previously. Has kind of a unique cut out for the Samsung logo. I also purchased a camera, hearbeat sensor, and home button glass.. I'm set lol.
Edit: forgot to mention the Qmadix also comes in all three colors. I purchased black respectively.
Click to expand...
Click to collapse
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
probably not full adhered.
Snowleopard1900 said:
Not sure if anyone has seen this yet, I don't know if it is full adhesive or not...... http://zerolemon.com/product/case-f...-for-samsung-galaxy-note-7-lifetime-warranty/
Click to expand...
Click to collapse
i tried dozens of them looks just like that, most of them only have adhesive on the sides or the top+bottom. all returned.
i suspect this one will be the same, but its not available to purchase on Amazon yet. Guest i will try this too.
i will report see how it goes. but i have no hope at all.
case friendly and curved too on the design like that..?? dont know thats legit or not.
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
chillsen said:
This will work 100%, even my case won't peel the screen cover.
http://imgur.com/a/sq0n5
https://amzn.com/B01HN2T6YI
you must get this specific version for the full cover. there's a lot of different variations. also let the film completely dry before you even attempt to wrap down the sides. you can use your palms, squeegee, and blow dryer. Remember the water spray is only for help with placement. When this film dries, its very stick and adhesive.
i just hate TPU material, its spongy, soft, leaves imprints and a weird texture. but it does full cover. tempered glass and PET film will never do that.
Click to expand...
Click to collapse
Your case doesn't even go around all the edges.
borijess said:
Your case doesn't even go around all the edges.
Click to expand...
Click to collapse
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
chillsen said:
the sides of the case overlap the screen protector with zero lifting. it would obviously work the same way for any case, even those that cover the top and bottom
Click to expand...
Click to collapse
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice after 12hrs. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
borijess said:
I have the same protector updated version on my note 7. Did the shrink wrap trick too when i applied it. Came out nice too. Once I put my UAG case it started to lift edges. I had to use a credit card to slide case phone in without lifting edges. So I thought I was all good right. Nope a day later it started to lift on the top side and bottom side. I have to smooth it back to down continuously. So either you got lucky or you case does not life the edges.
Click to expand...
Click to collapse
maybe it was the way you put it on? as in one side you will comfortable be able to tuck it under but the other side kinda snapped on and slid/lifted the cover in order for the case to snap on?
mahdibassam said:
Other threads didn't find this so called gem of yours, then mention it there, that's the whole point of the original tempered glass thread. To discuss solutions. Not make a new thread for the EXACT same thing. It's just annoying to have multiple threads for literally the exact same topic. Surely you get that.
Anyway. Do u have any photos or share so we can see how it looks?
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
ohblindone said:
Not sure if you found it yet, but here is the screen protector he was mentioning. Got good reviews (from a handful of people so far) but is pretty pricey at $35 U.S.
Click to expand...
Click to collapse
Just installed this. I think i know why most companies only use glue on the top or bottom. The quality of the product is good. The packaging is great but i would rather get something a little more simple and maybe save on the cost.
I have yet to turn on my replacement N7 so i cant speak on clarity but the fit is decent. It even works with my Seidio Dilex case on even though its "full screen"
Here is my one problem so far (its only been an hour since install) there is a slight clicking sound when you press on some areas. The edges etc. This is the reason why i think most companies dont use glue on the sides. I think this is where the clicking sound is coming from. I think i installed it as best as i could but who knows. Maybe its my fault.
Im going to try to use it for a while to see how well it works and if i can stand the clicking sound. This is my 1st glass screen protector for the N7 and i dont think ill try more in the future. I just wanted to try one out.
Had the original transparent case from Honor from day one on my Honor 8 Sapphire Blue with a glass protection on screen.
I ordered the GKK Ultrathin Matte Bumper Protection Case in blue off ebay could it came within 3 weeks from China something like €2.30 free shipping.
It's a 3 part case where the top and bottom parts cover once on cover up to the screens board line and the mid section the main bulk of the phone. The top and bottom covers have two each locking tabs (push fit) into theid section of the case.
One on its a nice tight fit around the device and lays flat on the screen No Gaps.. All punched holes are spot on, camera's sensor, jack plug, speaker, mac's fingerprint sensor and charger port. Must say the light sensor cut-out is over sized for some reason not round but oblong with top and bottom being curved. The volume and power buttons all make a positive travel with a soft soft click sound when pressed.
The mid section of the case once on hugs the phone nicely and meets up with the top of the phones frame edge and not curved round over to met the screen.
Having said that the case feels good in the hand nonslip does not make the phone look bigger or feels heavier.
I left my armoured screen glasses protection on when fitting this case NOTE if you choose to leave an armoured screen protection due to the thickness of the armoured glass you will need to offer up basically take you time and make sure the top and bottom of the case when fitting is over the armoured protect and push down slowly to met up with the mid section.
Reason being if you just went and try and put the cover or or force the cover on you'll have a high rate of the armour cracking, breaking..
The other option would be to use a protection film on the screen and one could just push fit the cover section in place without worrying about any damage.
Like the phone itself the bumper case is a fingerprint magnet but it's an around good protection to the body of the phone and still use the phone as if there was no phone case on it..
Is it worth it? Yes
Can you fit case if device has a armoured glass protection? Yes but be very careful take you time very tight fit.
Would I recommend others to buy it? Yes
Doesn't seem to move or slip off a flat surface while it vibrates on calls..
looks nice, would have chose a different colour tho
It looks like a hassle....i just need a strong back case and a tempered glass that covers the whole screen.....i got the cover all right but finding the tempered glass is a bit of a hassle the Terapin ones i got did not covered the whole screen it has like 0.5 cm space from each side
trainpunk said:
It looks like a hassle....i just need a strong back case and a tempered glass that covers the whole screen.....i got the cover all right but finding the tempered glass is a bit of a hassle the Terapin ones i got did not covered the whole screen it has like 0.5 cm space from each side
Click to expand...
Click to collapse
It's not snap fit all in a few seconds without an armoured screen protection otherwise one needs to take care if fitting over an armoured screen protection.. All in all it's a well made and designed case..
There is a similar case where it protects the rear and sides leaving you to put a screen protection on at ease..
Nyssa1104 said:
It's not snap fit all in a few seconds without an armoured screen protection otherwise one needs to take care if fitting over an armoured screen protection.. All in all it's a well made and designed case..
There is a similar case where it protects the rear and sides leaving you to put a screen protection on at ease..
Click to expand...
Click to collapse
Sorry cause i don't understand...does this full armor case has a glass that protects the actually screen or does it just cover the whole phone except for the screen?
Also if you already have a tempered glass on your phone do you need to remove it? or you can apply the case without any issues?
It just covers the phone the screen is exposed no protection..
My phone already had a armoured screen protection on it and l carefully put the top and bottoms of this case over it..
How does the case feel in the hand? And do you have trouble whit the screen, knowing it covers the phone exept the screen