Related
Does anybody know if there is a Today Screen plugin which monitors the charging uptime?
History for my question:
I changed my car and the new Board Computer (BC) doesn't show the time from starting the engine (my previous car BC did it). It was a nice feature and so I thought this could be done by my PocketPC (MDAc) starting the uptime clock when I put it into my active Brodit holder in my car....
You could try this
You could try this software.
Looks good. Will try it. Thanx for your quick response.
I could find any setting in this application to start the clock when charging. Only reset the counter to zero when charging.
Any other apps?
No software available for my request?
sounds like a pretty specific program you want
maybe you should have somebody custom make it for you
seemed to be so.
but is a today screen which displays the charging time such a special thing?
donno never heard about it before
nor have i ever wanted for it before
Contactor-E - it could be written easily enough, but I'm afraid I have no time right now, setting up my website and finishing off another ton of stuff for you guys.
I assume that someone's written one, but I really can't think of one...
V
I will try to start programming my application...
I'll report here about my success.
Some of what you want may be displayed with Beemer's TodayWarrior:
http://personales.ya.com/beemer/todaywarrior1.htm
There are various toggle icons that show: battery %, elapsed time from last charge, charging, estimated remaining battery time, time to 100% charge, battery volts, current (mA), consumption (mW), temperature. There are also icons for power off, always on, etc.
However, I had problems with its WiFi monitoring side (this can be disabled). It would detect the WLAN, but then hang the application and Xda Exec. The extra WiFiKnife utility didn't work, however, my problems may have been because I ran it from SD-card - haven't had time to test further.
Thank you, but TodayWarrior does not support showing the charging time. Only "Charging" is displayed when connected on power.
here's one
it shows the charging time as well as the time running on batteries. also shows battery indicator and device active time (time the device is turned ON and not sleeping).
it can hide or change its size when running on batteries/charging to save screen space.
you can customize it separately for charging/batteries
see screen shorts
have fun.
edited:
CAB file removed, get the newer one below
Re: here's one
Slight slip up here, this file is actually a RAR-archive and NOT a ZIP-archive. After downloading it, rename the extension from .zip to .rar.
Re: here's one
astage said:
Slight slip up here, this file is actually a RAR-archive and NOT a ZIP-archive. After downloading it, rename the extension from .zip to .rar.
Click to expand...
Click to collapse
thanks, RAR did what I told it to do and not what I wanted it to do
Tried this on Windows Mobile 5, on the O2 Exec (Universal), and couldn't get it to do anything at all.
Hi zfiser!
Works GREAT !!!!!!!!!!! on my MDA compact !!!!
Wow!!!!!!!
Just installed but seems that this is the application I looked for!!!!!!!
Whrer did you find this app? Did you program it?
Do you know what the plugin number is for?
Thanks again!!!
Yes Works great on my Qtek 9100 under WM 5.0
Thanks for this app
The plugin number is to indicate the height you want for the plugin on the today page.
UPDATE
all right guys, since actually 3 people got it and 2 even got it working, I decided to spent some more hours on it. it's quite fun actually.
so, what is new?
1) AUTOSIZE - the plugin automatically decides its height based on your setting. You can still manually override it.
2) ACTUAL CHARGING TIME - now showing time it's plugged in to outlet and also time the battery was charged for. when the battery is fully charged the time stops and you can see how long it took to charge it.
3) ICONS! yea! I think that's pretty cool, saving you a lot of space on the screen while showing everything, plus it looks freaking awesome!
4) more options - the plug can turn itself to color red when the battery level falls under a certain percentage, set by you. now you can't overlook that your battery is almost dead
5) BUGFIXES, yea, that nasty bug not showing minutes, I noticed too, some minor tweaks
Checkout the screenshots! And have fun. And if you still miss something in this plugin (tetris, nude women, etc), let me know
IMPORTANT NOTICE: You MUST disable the plugin in TODAY screen setting (uncheck the checkbox) BEFORE upgrading. Make sure the plugin does not show on the Today screen before you upgrade!
I made the upgrade this morning => no problem
I just want to say that I had to make a soft reset after installation otherwise the plugin didn't show on today screen.
You've done big improvments since the first version
- good idea the icons to save place
- thanks for the autosize
- I'm going to test it this wee-end but no bug at this time
- what about a log file to keep trace of every data that zfTCT record ? Could be useful I think.
I welcome. I have the very untypical problem.
It all started with it around the phone started showing that the battery is unloaded, in spite of it around was loaded up. I thought cool it apparently a battery fell down. I bought new and unfortunately the same. Since the battery almost on max is loaded up the rally is loading it for moments and then loading is turning off. However an indicator of loading up on the nought and an announcement of the weak battery are demonstrating the system and it is disconnecting. I thought ok I will make hard reset and most probably he will help, however it turned out around not. Yeah rally loaded WM6 together with new ROM and unfortunately the same old story. I will still add around after this moment when is loading and an orange diode is shining and the indicator is showing the battery around loading is when he is finishing an indicator is appearing around empty battery and with stamp 'x'.
I hope around somebody here will help me. And perhaps somebody knows where in the register it is possible to change placing so that the system doesn't download details about loading the battery up and he wasn't mutually exclusive
Say what?
Can you please ask someone to translate so we can at least understand what your problem is?
ok I write it with my words.
When I switch on my phone battery indicator in main screen shows zero and sign '!' and the telephone switch off itself.
When I put usb cable or telephone battery charger and switch on my phone the phone charging about 10-20 seconds and after that battery indicator shows empty battery and sign 'x'. The phone still work but the indicator in Settings/Power Managment/Main Battery is completely empty.
I have new battery so battery is ok. I made hard reset and changed software from wm5 to wm 6.1 and the battery still isn't charging.
I hope that it is undertanding now.
Has the battery indicator ever worked while you've owned the phone, or is this something that has happened since upgrading your ROM? Having said that, this sounds more like a hardware issue to me. Try taking the battery out and cleaning the pins on the phone. If you've tried different ROM's, I don't believe it's a software issue and after a quick search of the forum, I haven't found anybody with a similar issue, which I would expect to if it were software related
The battery indicator worked normally and one day it stopped working. I upgraded ROM becouse i thought that it help.
I have second question. Whether it is possible to change the register this way so that the starting system doesn't read the level of battery charge out.
I have the same problem. Did you solve it?
Hello all,
I hope i am posting in the right place, if not please move my post to the right place.
I have update to bada 2.0 using the firmware from hero355 http://forum.xda-developers.com/showthread.php?t=2131676
And after the update i have some small problem.
Bada 2.0 introduced the percent battery status option, but this does not work well on my phone Samsung GT7230-E.
After i fully charged the battery i see the message "Battery fully Charge ... " but the percent shows 0% and i must power off and power on the phone for it to work.
After the phone reboot i see the battery status to 60%, but this percent status stays like this until the phone is out of power.
Even if i have only 4% of battery, the battery status shows 60% forever until suddenly the phone auto poweroff as there is no power left in battery.
The phone stays ok couple of days like this so this is not a battery problem
This happens even if i disable percent option in battery status, is the same with the battery grid status as well.
Second problem is the sound is not so loud like in bada 2.0 and i dont see an option to make it louder.
Also in sound profile there is no option to change the vibration to sound more seconds.
I want an option if i select "vibrate then sound" for the vibration to be more then 1 second.
Right know the vibration takes only 1 second and right after it the sound alarm goes on.
If something else is needed to debug this let me know.
Thanks,
Good morning every1,
I installed NeatRom on my i9100 and worked marvellous for months, now is a living hell! Not blaming the Rom itself but some kind of conflict between hardware and software.
Bug Description: screen strange behavior, in certain conditions won't turn on or will show strange colors, over illuminate or darken display, while at start up it will always work fine.
Trigger: locking the screen normailly causes to blackout but it will not turn on again on most tries, pushing the power buttom or the home buttom is equally uneffective most of the times. However, reseting the phone by removing the battery (since there's no display is the only way) will allow the phone to start normally: normal brightness, normal colors and normal operation everytime.
Fixes tried so far: I've reset the phone to factory, erase all cache, partition and delvik, and reduced the amount of apps to keep ram very low in usage. Also, I've removed the phone cover to check the screen connections, check the cable to see if its not broken and everything its fine. The display is not broken or otherwise damaged.
Opinion: since the display works fine at start up and would be working normally for as long as I don't lock it, I'm discarding all hardware problems of the screen itself; and I've removed all apps to avoid conflct of other software and it still has the same problem. Therefore, I think there's somekind of conflict between NeatRom and the screen (drivers maybe).
PLEASE HELP! :crying:
Malakiel said:
Good morning every1,
I installed NeatRom on my i9100 and worked marvellous for months, now is a living hell! Not blaming the Rom itself but some kind of conflict between hardware and software.
Bug Description: screen strange behavior, in certain conditions won't turn on or will show strange colors, over illuminate or darken display, while at start up it will always work fine.
Trigger: locking the screen normailly causes to blackout but it will not turn on again on most tries, pushing the power buttom or the home buttom is equally uneffective most of the times. However, reseting the phone by removing the battery (since there's no display is the only way) will allow the phone to start normally: normal brightness, normal colors and normal operation everytime.
Fixes tried so far: I've reset the phone to factory, erase all cache, partition and delvik, and reduced the amount of apps to keep ram very low in usage. Also, I've removed the phone cover to check the screen connections, check the cable to see if its not broken and everything its fine. The display is not broken or otherwise damaged.
Opinion: since the display works fine at start up and would be working normally for as long as I don't lock it, I'm discarding all hardware problems of the screen itself; and I've removed all apps to avoid conflct of other software and it still has the same problem. Therefore, I think there's somekind of conflict between NeatRom and the screen (drivers maybe).
PLEASE HELP! :crying:
Click to expand...
Click to collapse
Hello,
XDA assist is for newbies finding their way around XDA Developers, it isn't a development section.
Please try posting the bug reports in the same thread you found the ROM in order to provide a helping hand to the developers.
-Vatsal
MY S22 ULTRA, 5 months old, began 48 hours ago to show the background of the lock screen (active display with a black background, in a very oscillating dark green color.
It only happens when the active display is activated, and sometimes inside with a dark background when it tries to adapt the brightness to the environment, it occurs as a kind of almost imperceptible flickering.
Internally the navigation, videos, photos and others are all perfect.
Things I have already tried:
Wipe Cache
Toggle between all screen resolutions and display options etc etc
With the mobile turned off while charging, if I press the power button to see the percentage of charge, that green is also seen.
I was reading that it may be a screen failure, but I still refuse to leave the phone in repair (150GB of internal information already copied), I don't know whether to wait for an update or what else to try.
Any suggestion?
Sorry for my english
I don't have answers for your issue, but I had exactly the same issue. I damaged my screen and it started appearing right after the damage to the screen. I don't use AOD, but mine did the same thing when it was put on charge.... no black screen, just the weird green. I turned off adaptive display and it disappeared. Had 2 updates since then and put back adaptive display and now the green is still gone. Not sure if was an update or the adaptive display change that fixed the issue
paulbcn said:
MY S22 ULTRA, 5 months old, began 48 hours ago to show the background of the lock screen (active display with a black background, in a very oscillating dark green color.
It only happens when the active display is activated, and sometimes inside with a dark background when it tries to adapt the brightness to the environment, it occurs as a kind of almost imperceptible flickering.
Internally the navigation, videos, photos and others are all perfect.
Things I have already tried:
Wipe Cache
Toggle between all screen resolutions and display options etc etc
With the mobile turned off while charging, if I press the power button to see the percentage of charge, that green is also seen.
I was reading that it may be a screen failure, but I still refuse to leave the phone in repair (150GB of internal information already copied), I don't know whether to wait for an update or what else to try.
Any suggestion?
Sorry for my english
Click to expand...
Click to collapse
Are you have newest soft?
_GRIZZLY_ said:
Are you have newest soft?
Click to expand...
Click to collapse
No, only official android updates, last 1ยบ august
I had that problem in my note 8, had to send it to warranty to replace the display circuit and the display because of burn in pixels.
burnin said:
I had that problem in my note 8, had to send it to warranty to replace the display circuit and the display because of burn in pixels.
Click to expand...
Click to collapse
Can it get worse or will it always stay like this?
I just replaced the screen protector and it's still the same sometimes, not always, it seems to improve things but it only appears if I force the situation with dark environments.
How do you explain if it was a screen problem, within the android there is no display problem in photos, videos etc etc
It only affects the active display and while the adaptive display is active, that's why I don't want to send it to warranty so soon, I even hope that with Android 13 it will be solved!
To those who had to change the screen, did it come under warranty and the fault has been recognized without having to pay anything?
Obviously, if it were the screen, it would have to be some sensor or sector of the screen that only acts under certain conditions and I don't know at the hardware level what it could be, if any sensor or sector of the screen is internally damaged, it is very strange.
Thanks for answering.
paulbcn said:
Can it get worse or will it always stay like this?
I just replaced the screen protector and it's still the same sometimes, not always, it seems to improve things but it only appears if I force the situation with dark environments.
How do you explain if it was a screen problem, within the android there is no display problem in photos, videos etc etc
It only affects the active display and while the adaptive display is active, that's why I don't want to send it to warranty so soon, I even hope that with Android 13 it will be solved!
To those who had to change the screen, did it come under warranty and the fault has been recognized without having to pay anything?
Obviously, if it were the screen, it would have to be some sensor or sector of the screen that only acts under certain conditions and I don't know at the hardware level what it could be, if any sensor or sector of the screen is internally damaged, it is very strange.
Thanks for answering.
Click to expand...
Click to collapse
It was everything free, they replace the display circuit controler, the display and battery (mandatory on note 8 if you replace the display they replace also the battery).
The problem was stable, no true black, allways greenish, sometimes flick and turned true black for couple of seconds and returned to that greenish black. Was horrible, my luck was i had 24 months of warrany and this happend on my 22th month!
Hi, I have same problem for 2 weeks now. Seems to occur when in low light placed and adaptive brightness is on. Did you find solution?