I'm running NexusMod GB 4.3, did a few Nandroids to be carefull. In a stroke of genious decided I wanted to try the ISC radio w/ GB, flashed UCLD2, rebooted, no signal. I said no problem I'll just restore the nandroid I just did. Well the restore did not work because cwm said the md5 did not match. I have since reinstalled the GB 4.3 zip and all is good.
I am using the old sd card from my HTC Incredible 2 which is formatted ext3. I'm thinking this might be the issue.
Why did my nadroids not work?
Sorry if this has been covered before.
My understanding is that ICS uses EXT4 formatting. Possibly by flashing an ICS modem it may have hosed up the GB formatting (EXT3). This is just a guess on my part.
jawmail said:
I'm running NexusMod GB 4.3, did a few Nandroids to be carefull. In a stroke of genious decided I wanted to try the ISC radio w/ GB, flashed UCLD2, rebooted, no signal. I said no problem I'll just restore the nandroid I just did. Well the restore did not work because cwm said the md5 did not match. I have since reinstalled the GB 4.3 zip and all is good.
I am using the old sd card from my HTC Incredible 2 which is formatted ext3. I'm thinking this might be the issue.
Why did my nadroids not work?
Sorry if this has been covered before.
Click to expand...
Click to collapse
First of all what version of cwm are you running in your phone? Seems ya got a corrupted nandroid backup or was made with different version of cwm at the first time. BTW try to flash the modem back to ucalc4 to see if ya can get signal working again. Hope this can help.
LuneBear said:
First of all what version of cwm are you running in your phone? Seems ya got a corrupted nandroid backup or was made with different version of cwm at the first time. BTW try to flash the modem back to ucalc4 to see if ya can get signal working again. Hope this can help.
Click to expand...
Click to collapse
The cwm version I used on the last backup is 5.8.1.3 touch. I got signal back just by reflashing the original Nexusmod zip
jawmail said:
The cwm version I used on the last backup is 5.8.1.3 touch. I got signal back just by reflashing the original Nexusmod zip
Click to expand...
Click to collapse
You have no idea what your doing. Read more flash less.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
You have no idea what your doing. Read more flash less.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the help JA
I think I know where you went wrong. When you tried to restore your backup, That would have restored only your rom. When you flash the radio, it stays regardless until you replace it. That is of course unless you flash in a rom which has a radio included.
Sent from my SAMSUNG-SGH-I727 using xda premium
jawmail said:
Well the restore did not work because cwm said the md5 did not match.
Click to expand...
Click to collapse
I had that problem too, and searched around, and found that if your backup in your CWM folder is missing the nandroid.md5 file (for whatever reason) then CWM wont restore.
What I did, and it's up to you if you want to risk flashing a possibly corrupt backup, create a blank nandroid.md5 file, place it in the backup folder, and go to CWM and re-flash.
OK, I got it to work. I actually read sk8erwitskils thread and followed the directions. The .hiddenandroidprocess file was missing. I put it in the correct sdcard/clockworkmod location, mounted sdcard like he said to do and everything works now.
jawmail said:
OK, I got it to work. I actually read sk8erwitskils thread and followed the directions. The .hiddenandroidprocess file was missing. I put it in the correct sdcard/clockworkmod location, mounted sdcard like he said to do and everything works now.
Click to expand...
Click to collapse
Reading works, it really works! Yay!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Related
OK so we know the bionics bootstrap recovery doesn't work. I was messing around with Rom manager and flashed the bionics recovery and was successful. Recovery version 5.0.2.5. Then I booted into recovery from Rom manager and performed a successful backup! Gonna hold out on flashing the backup right now but I'm hoping someone that knows a lot more then me will look into this also and see what they think about it and can we possibly use everything without fearing a bricked device .
i successfully created a backup using the bionic bootstrap recovery, but im leery of trying to do a restore without having an sbf handy
Well I got brave and clicked the restore button using the bionic bootstrap recovery. I have 20+ days left to return the phone if anything went wrong. I backed up using the recovery, then clicked restore. Everything restored perfectly. I did not choose wipe data though, as I didn't think it would matter. Just thought I would add that bit of information. Hope this helps guys.
Sent from my MB865 using XDA App
I just used CWM 5.0.2.5 to restore the system backup I made before updating, and indeed it worked fine. I'm back down to 55.11.16 android 2.3.5 (from 55.13.16 - 2.3.6) with seemingly no ill effects. IIRC, I made this system image with the bionic bootstrap recovery app.
Im still on 55.11.16 android 2.3.5 also, I know using Rom manager to make a backup took a lot longer then what I was used to on my OG. Just went through a restore with no seemingly ill effects. Has anyone tried flashing a zip yet? Just glad we seemingly have a recovery that is working.
my vivid will be here in the next day or 2. once i have that, i will risk the Atrix2 and start working on a rom.
Oh no Pirate your switching over to the HTC Vivid? I have been looking at the reviews on that device and it looks as thick as my A2 with the defender otterbox. I'm going to kick my cat if people start abandoning ship on the A2, bummer!
Awesome work on getting CWM to backup and restore. I would love to see some custom roms being dumped onto this device.
Nice! Recovery loads up smoothly on rom manager. This could get interesting...
If your bootloader is not unlocked be very careful as to what you flash!
Try a theme or something that does not affect kernals,
Just my thoughts
sent from my Atrix via XDA premium
Pirateghost said:
my vivid will be here in the next day or 2. once i have that, i will risk the Atrix2 and start working on a rom.
Click to expand...
Click to collapse
I still have 20 days to be a guinea pig LoL
If you really feel like being a ginuea pig you should try flashing the zip from this thread. It's a few posts down.
http://forum.xda-developers.com/showthread.php?t=1331644
sent from my Atrix via XDA premium
marko! said:
If you really feel like being a ginuea pig you should try flashing the zip from this thread. It's a few posts down.
http://forum.xda-developers.com/showthread.php?t=1331644
sent from my Atrix via XDA premium
Click to expand...
Click to collapse
i wouldnt. i havent even modified the updater-script to be right yet....
hell, i made it, and even i wouldnt flash it in that state
I dont see any zip in that thread? Are you referring to the system.img.zip pirateghost posted? That was in the recovery thread?
Pirateghost said:
i wouldnt. i havent even modified the updater-script to be right yet....
hell, i made it, and even i wouldnt flash it in that state
Click to expand...
Click to collapse
Thanks for the heads up!!
I'm unable to reapply the patch up to 55.13.15
Code:
contents of partition "boot" didn't match MTD:boot:8388608:9651a551679347926bb7589bb4b57d8dea357cb4:8388608:b56beaeb976b10b86cdbd38e87024ab16fe1197f
I've supposedly restored the boot partition with cwm, oh well.
This is probably to be expected. I'm guessing I can only get the stock boot partition back with a proper fxz flash to stock...
edit: I don't think cwm is even saving a boot image. I don't see one in any of my backups.
Makes me wonder what it's doing when I restore boot
JRW 28 said:
I dont see any zip in that thread? Are you referring to the system.img.zip pirateghost posted? That was in the recovery thread?
Click to expand...
Click to collapse
he was talking about this post:
http://forum.xda-developers.com/showpost.php?p=19033826&postcount=7
Just because I'm willing to try things doesn't mean I'm willing to knowingly brick my phone.
Thanks PG!!
Oddly enough it was the Bionic recovery installed from Mod Manager is what I had installed when I bricked my phone.
Pirateghost said:
i wouldnt. i havent even modified the updater-script to be right yet....
hell, i made it, and even i wouldnt flash it in that state
Click to expand...
Click to collapse
well thhats good to know !
does any flashing work with cwm? ie flash files to system? i can see nandroid not working, but simple flashing should.
svtfmook said:
does any flashing work with cwm? ie flash files to system? i can see nandroid not working, but simple flashing should.
Click to expand...
Click to collapse
No. I built several zip files to flash and cwm nor the bionic bootstrap worked.
I think we may have to wait for the official cwm release, with our device in it.
Jim
Sent from my MB865 using XDA App
Hi, I was using Paul Burtons ICS port and I made a backup of my Prime rom . However when I booted back to CWM and restored the NAND backup it says succesful yet when I reboot, the screen stays black after the transformer splashscreen/logo.. I tried erasing all data and factory reset and searched and checked the original thread... I can however go back to the ics port and successfully boot up to it... any help would be greatly appreciated.. thank you XDA.
goodness ya noob.. you shouldn't have flashed that ics port.. it was extremely experimental. Anyways seeing that you tried everything I would have, Im sorry to say that i can't help but I applaud you for at least searching and checking the original thread. LOL.
Sent from my GT-I9100 using Tapatalk
Thank you for trying, I just hope someone knowledgable saves my day... I really need it..
good news i done the same, i had to completly wipe everything, reflash the rom, im using kkrad 1.4.2 and then advance restore and restore data, job done
Sent from my HTC Desire using XDA App
wipe /syste /data /cache... basically everything in CWM possible, then re-flash the Prime or whatever you want
I did the same thing as op. But when I try restoring I get an error saying .android_secure.img is missing. Any ideas?
mafo5000 said:
I did the same thing as op. But when I try restoring I get an error saying .android_secure.img is missing. Any ideas?
Click to expand...
Click to collapse
Maybe a fresh install instead of a restore?
SiNJiN76 said:
Maybe a fresh install instead of a restore?
Click to expand...
Click to collapse
Im back at stock and i still cant restore. Its the .android_secure.img. its missing from my sd card
i had the same problem i did the wipes in cwm and then restored and got a black screen as you describe.
then i grabbed superwipe from revolution rom(i dnt kno if its neccessary but it worked) from black screen i boot into cwm ran superwipe loaded my rom which is revolver right from the rom flashable zip as a new install. then rebooted and back into cwm then restored my backup. not sure whats goin on or why it worked it may be overkill but i got back to my backup.
if you need better explaination just ask
So i would use super wipe lite or the normal one?
lhy1224 said:
So i would use super wipe lite or the normal one?
Click to expand...
Click to collapse
Use Super wipe lite if you want to keep SD card contents, but try the methods listed above before trying the latter .
Sent from my GT-I9100 using Tapatalk
Thank you to everyone ! It seems like i had to wipe everything and flash a clean install instead of my CWM backup. Thank you XDA community, you're the best !
Np, thank the others who really helped you
Sent from my GT-I9100 using Tapatalk
I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Can any one tell me what i did wrong?
I used a I727UCALC4_OneClick package to flash my at&t i727 to android 4.0.3. For some reason my home button and search button did not work so i said to return back to stock.
I flashed the phone with SGH-I727-UCKJ2-k0nane thru ODIN to return to stock 2.3.5 . I then tried to do a OTA update to 2.3.6. The update downloads and starts installing , reboots the phone and fails to finish.
Any help please ? Thanks
I tried doing this myself last night. Remember you will lose your root once taking it to 2.3.5, so re root using Odin, then, reboot. Then follow the root instructions as outlined by user k0nane here at xda. Then get into clockwork mod recovery mode and restore to the backup version you did of 2.3.6...much easier process than trying to flash stock. Hope that helps.
Sent from my SAMSUNG-SGH-I727 using xda premium
i have the original backup done with rom manager but when i go in cwm and try to restore the backup gives me dm5 mismatch. I dont know why
dexter4000 said:
i have the original backup done with rom manager but when i go in cwm and try to restore the backup gives me dm5 mismatch. I dont know why
Click to expand...
Click to collapse
You might have renamed the backup, the backup might be corrupt, or you did the backup with a different version of cwm than you are trying to restore it with.
If this helps I got here a copy of my mhx lite 2.3.6 I made before going to 4.0.3
http://www.mediafire.com/?ese068jm6139l
xcrazydx said:
You might have renamed the backup, the backup might be corrupt, or you did the backup with a different version of cwm than you are trying to restore it with.
Click to expand...
Click to collapse
so cwm doesnt restore a backup if it was not made with the same cwm version ?
i was able to fix the md5 mismatch and it restored successfully, however it does not boot now. It stalls and the samsung logo.
Try using the restore I linked, something just seems wrong with yours
dexter4000 said:
so cwm doesnt restore a backup if it was not made with the same cwm version ?
Click to expand...
Click to collapse
Sometimes it does and sometimes it has problems
Also did you flash the right modem as well?
Correct me if I'm wrong but cwm doesn't backup the modem as I recall
kishke said:
Try using the restore I linked, something just seems wrong with yours
Click to expand...
Click to collapse
is that one att original or is custom? my backup was made from original 2.3.6 only rooted.
Can in install stock 2.3.6 rom/kernel and restore only the data from the backup ?
Thanks
kishke said:
Also did you flash the right modem as well?
Correct me if I'm wrong but cwm doesn't backup the modem as I recall
Click to expand...
Click to collapse
i installed the ucla3 stock modem from here http://www.mediafire.com/?h7bnu7kvpw7dqtg
dexter4000 said:
is that one att original or is custom? my backup was made from original 2.3.6 only rooted.
Can in install stock 2.3.6 rom/kernel and restore only the data from the backup ?
Thanks
Click to expand...
Click to collapse
Its mhx superlite 3.1 but if the rom will work you can later on flash whatever you want. Atm you seem to be stuck with an unusable phone so anything is better.
Go to sammobile.com
make an account
go to firmware section
type i727 in the box
scroll down and download the tar
extract with 7zip
Flash in odin
Then drink beer and such
i was able to flash tru cwm a att rom that worked. Everything works ok now.
It is possible to transfer my data from the backup into this working rom ?
Just flash modem. To match firmware....
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
UCLA3 modem, firmware and rom were flashed and everything works great. I only need to transfer my user data from the backup. Can i flash only the user data to the phone from that original backup?
Sent from my SAMSUNG-SGH-I727 using xda premium
dexter4000 said:
UCLA3 modem, firmware and rom were flashed and everything works great. I only need to transfer my user data from the backup. Can i flash only the user data to the phone from that original backup?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
pretty risky if the backups corrupt anyway... but you can try (i would make a back up first)
Hey all,
Recently, I had an issue with the SD card in my skyrocket. Phone will get stuck at custom boot screen for a while. After finally booting, I noticed I had to reinstall some apps...not all.
Anyways,
Right after this happened, I noticed that I could no longer perform a clockwork mod backup as I have done with no issues. It gets stuck randomly during the system files backup state. What can I do to fix this?
I have tried many things, including fix per, flash new cwm version and format new card and copy over all files previously other. Nothing seems to work.
Any help is appreciated...
Thanks
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I would flash back to stock reload the whole initial bootloader and stock recovery then go and redo the actual superuser then put on the custom recovery try TWRP or you can try cwm again nothing against skaters CWM twrp is just easier for me
Ahh, was not familiar with twrp and have always used cwm. However, after your reply and downloading and flashing it, I must say I love the GUI and ease of use.
Anyways,
I flashed it and did perform a backup. While I did get two errors, it did actually complete and I believe it did save data to this SD card. Should I worry about the errors though?
What's the difference between this from recovery tool and cwm? Still can't get cwm to backup after that SD card issue.
Thank you much for quick reply
--mike
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pookieguy said:
Ahh, was not familiar with twrp and have always used cwm. However, after your reply and downloading and flashing it, I must say I love the GUI and ease of use.
Anyways,
I flashed it and did perform a backup. While I did get two errors, it did actually complete and I believe it did save data to this SD card. Should I worry about the errors though?
What's the difference between this from recovery tool and cwm? Still can't get cwm to backup after that SD card issue.
Thank you much for quick reply
--mike
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
if your not having issue with twrp then i wouldnt worry there has been alot people that said thta sk8ters recovery was giving issues never personally had any trouble when i used maybe just bad recovery.. sometimes thing act wonkie for no reason
Thanks...
Should I worry about the two errors even if it did complete?
Also, how do you restore?
I tested by booting to twrp and hit the restore button. I browsed to directory on SD card where backup is but not sure what file to chose?
Thanks again...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
pookieguy said:
Thanks...
Should I worry about the two errors even if it did complete?
Also, how do you restore?
I tested by booting to twrp and hit the restore button. I browsed to directory on SD card where backup is but not sure what file to chose?
Thanks again...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I don't use twrp but shouldn't the backup be named after the time/date it was created. If that's true then you should know which backup to choose by looking at the time/date.
I'm thinking the folders for the failed backups are also there..