Hey all, I saw that these became available recently. I was thinking about getting one for when I do rougher activites but was concerned about taking away from the slimness of the phone. I already have the OEM HTC matte black slim case. Anyone get this yet or have any feedback on it's build quality, size, weight and fit/finish?
Any input is appreciated.
Thanks
http://www.otterbox.com/htc-one-s-cases/htc-one-s-cases,default,sc.html
I am interested as well. I figure the slimness of this phone will help making any decent case that much more appealing. My friend has a case on his S2 and that thing is a BEAST.
im in the same boat. Since the phone is so small, i figured that the otterbox couldn't add that much heft to it. Now i'm anxiously waiting!!
HD2: 4.76" x 2.64" x 0.43"
One S: 5.15" x 2.56" x 0.31"
As you can see, the HD2 was pretty slim for a 4.3" phone, and the defender turns it into a 5.1" x 2.93" x 0.8" beast. It does however protect in every way possible, with lenses over the camera and flash, some sort of rubber membrane over the speakerphone, a rubber flap over the ports, a built in hard screen protector, and soft rubber stretched over strong plastic everywhere else. It comes with a belt holster that rotates and allows the phone to be securely snapped in face first, back first, or rotated 180* and functions as a dual angle kickstand in portrait or landscape. The whole thing is surprisingly light given its strength, but it had one big drawback that otterbox has hopefully resolved by now: it was far too easy to get contaminants underneath the screen protector, and once there it was very difficult to keep clean, clear, and smudge free.
Given the cost difference and my preference to go without a screen protector I'm saving for the case mate tough case, and for day to day use I'm happy with my diztronic.
For the Commuter case the dimensions on Otters site are 5.4 in x 2.81 in x 0.56 in
For the Defender Case the dimensions on Otters site are 5.48 in x 2.89 in x 0.67 in
The Dimensions for the One S: 5.15" x 2.55" x 0.31"
Both cases add size but IMO they won't make this phone a brick.
I don't have either of the otterbox cases for this phone, I do have the Ballistic though. The ballistic is most similar to the Otterbox Defender series. In my opinion the case does not not a significant amount of bulk to the phone and it still fits very comfortably in my pocket as well a stand I have on my desk. I can provide pictures of it if your are curious.
The commuter just came out today just put my order in
Sent from my HTC VLE_U using XDA
tdtylert said:
The commuter just came out today just put my order in
Sent from my HTC VLE_U using XDA
Click to expand...
Click to collapse
Please post pics of it when it arrives, I'm concerned that it has the built in screen protector cover that is normally on the defender not the commuter series.
mosep1 said:
Please post pics of it when it arrives, I'm concerned that it has the built in screen protector cover that is normally on the defender not the commuter series.
Click to expand...
Click to collapse
They sent me a email this morning saying I should receive it on tuesday I will. I thought the same thing looking at the pics that they have but if you read the description its says it will include one separately.
Sent from my HTC VLE_U using XDA
still waiting on the defender. i really want the belt holster. But cant wait to see pics of the commuter case as well
just ordered my commuter series case, had one for my evo before i switched to an HD2. I think a little bit of extra security is worth it over cosmetic appeal of slimness. Just my thoughts
Just got my commuter case this morning ill try to post some pics later tonight. This is my first otterbox case and as far as looks I really don't like how it looks, but I gues it gets the job done. The case doesn't really add to much bulk, it just as wide as my d30 case and you don't really lose to much thinness.
Sent from my HTC VLE_U using XDA
Commuter is good comes with a screen protecter and the inside is made of rubber and the out of some weird rough plastic, overall the case is good for any kind of drops, thickness wise its as big as an n1 with no case
tdtylert said:
Just got my commuter case this morning ill try to post some pics later tonight. This is my first otterbox case and as far as looks I really don't like how it looks, but I gues it gets the job done. The case doesn't really add to much bulk, it just as wide as my d30 case and you don't really lose to much thinness.
Sent from my HTC VLE_U using XDA
Click to expand...
Click to collapse
Please do! And show profile pic.
Sorry for the quality only have a old digi cam and I was in a rush.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got my otter box yesterday, very happy with it. Hopefully this is my second, and last, one s......
Sent from my HTC VLE_U using XDA
Quick question, is the case 1 piece or 2 pieces that snap together to fit the phone? I can't tell and wasn't sure after looking at the website.
rubber for the cover, hard plastic for the frame, 2piece and a screen protector but fugg that it leaves a dirty imprint after u take it off
Loving my commuter case ...dropped my phone from 3 ft not a scratch anywhere on the case feels good
Sent from my HTC One S using Tapatalk 2
Has anyone picked up the Defender? I'm fairly certain that the One S is going to be my next phone but I work construction currently and that can be pretty hard on phones (Actually, my Milestone/Droid held up very well...Desire Z not so much). The two threads in the main forum about the screen breaking easily are worrying me a bit and an Otterbox is going to be a necessity here.
Is the Defender THAT much bigger than the Commuter? And apart from the clip, is it really that much more durable? I've checked the site and read what's there, but looking for real world experience from users (of both the One S and previous phones here).
Any help would be greatly appreciated.
Related
Anyone recommend a nice durable case that offer the most overall protection, with preferably not making it bulky? And what's a nice screen protector? I'm not really rough on my phones, but stuff happens. I just want to be protected.
I came across HTCDepot.com, is that generally a nice, legit site? I came across another one like HTCSensation4gaccessories.com or something, and it doesn't seem too legit.
Thanks
Here's my setup:
http://tpu-cases.com/index.php?main_page=index&cPath=25&zenid=ef4f8d65c98ae0a31c33842ab6b7dec1
A great case. Offers excellent protection, nice grip, and looks cool
For a screen protector:
http://www.bestskinsever.com/htc-sensation-4g-skin-566
Does the job rather nicely.
Excellent setup for protection and low-profile, IMO
What's the name of your case? That link doesn't work.
Thanks
I'll go for case mate. Just order one and i also have case mate with my vibrant.
http://www.case-mate.com/subpages/product.asp?prod=1629&dept=470
LaughingMoose said:
What's the name of your case? That link doesn't work.
Thanks
Click to expand...
Click to collapse
LaughingMoose said:
What's the name of your case? That link doesn't work.
Thanks
Click to expand...
Click to collapse
My mistake. Follow the link, and just click on HTC Sensation 4G.
I have the smoked TPU case. Looks gorgeous.
I would recommend the smoked case as well. Some cases don't have all the holes cut out, so be wary of that when looking.
Sent from my HTC Sensation
I already have screen protector and now thinking to get a cover. I have a question though, will the cover interfere with my WiFi or bluetooth signals as i see that wifi signal strength drops when i cover the upper area of phone. Will cover do the same thing ? what is yr experience ?
I agree with the tpu case I have the smoke grey color and it looks real nice.
Sent from my HTC Sensation 4G using XDA Premium App
I have the Incipio NGP. http://www.myincipio.com/HTC-Sensat...-Sensation-NGP-Semi-Rigid-Soft-Shell-Case.asp
This things is probably one of the best cases I've ever had as far as my uses go. It's a great fit, extremely durable, and doesn't add a lot of bulk.
My only complaint is that the cutout for the USB port is a little tight, so a lot of third party USB cables will push the case around when you plug them in. The HTC one is fine because the housing on it is nice and compact, but the bigger/more squared off housing on a lot of other cables just doesn't fit as well.
I use Ghost Armor for the screen, mainly because there's a kiosk at the mall near work, and they'll install it for me so I don't get air bubbles, etc.
etawful said:
I have the Incipio NGP.
Click to expand...
Click to collapse
That looks like the one that tmobile has... I have the gel skin that tmobile sells its fits the phone great and is very durable... I also have their screen protectors... The screen protector has alot of bubbles but I did put it on in a hurry... A friend said the same thing but I dont know if he put it on in a hurry too.
Mr_Boob_Burglar said:
That looks like the one that tmobile has... I have the gel skin that tmobile sells its fits the phone great and is very durable... I also have their screen protectors... The screen protector has alot of bubbles but I did put it on in a hurry... A friend said the same thing but I dont know if he put it on in a hurry too.
Click to expand...
Click to collapse
This one is a lot more rigid than the one T-Mo had from what I can tell.
It has almost no flex around the edges once it's in place. The T-Mo one seemed kind of "floppy" to me.
etawful said:
I have the Incipio NGP. http://www.myincipio.com/HTC-Sensat...-Sensation-NGP-Semi-Rigid-Soft-Shell-Case.asp
This things is probably one of the best cases I've ever had as far as my uses go. It's a great fit, extremely durable, and doesn't add a lot of bulk.
My only complaint is that the cutout for the USB port is a little tight, so a lot of third party USB cables will push the case around when you plug them in. The HTC one is fine because the housing on it is nice and compact, but the bigger/more squared off housing on a lot of other cables just doesn't fit as well.
I use Ghost Armor for the screen, mainly because there's a kiosk at the mall near work, and they'll install it for me so I don't get air bubbles, etc.
Click to expand...
Click to collapse
Looks like an ordinary silicone case to me.
Does it attract a lot of dirt and dusts? (I had that problem with my T-Mobile Sensation 4G silicone case. Got rid of it for a TPU-case smoke grey)
Case mate barely there, excellent.
Sent from my HTC Sensation 4G using XDA App
here is my
http://www.ebay.com/itm/HTC-SENSATION-SILICONE-TPU-CASE-SOFT-COVER-SKIN-/270782046422?_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D1%26po%3DLVI%26ps%3D63%26clkid%3D2354257502886807246
Very nice and protect my phone 3 times till now
Screen protector is ****,and i'm still look for good one
here is the second one
http://www.ebay.com/itm/320711418789?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648#ht_1948wt_972
but missing some hols
LPChris47 said:
Looks like an ordinary silicone case to me.
Does it attract a lot of dirt and dusts? (I had that problem with my T-Mobile Sensation 4G silicone case. Got rid of it for a TPU-case smoke grey)
Click to expand...
Click to collapse
No, it's not typical silicon case. It's much harder material and does not attract any dirt or dust. This is far more like TPU, but all the TPU cases I've seen for this phone were glossy, this has a matte finish.
Sent from my HTC Sensation 4G using xda premium
Saw this at another forum. Painted cover + clear case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hytl said:
Saw this at another forum. Painted cover + clear case
Click to expand...
Click to collapse
Where did u find this? These are cool case.
Sent from my HTC Sensation 4G using XDA Premium App
CaseMate "Barely There" is the one for me.
Its wafer thin, very strong, and adds that little extra grip that the Sensation needs to stop it sliding around in your hand.
Cant reccomend it highly enough. Attached are some pics i took of it.
Doing hours of research on all diffrent types of cases i can apon the theory that case-mate are some of the best cases for the phone.. but i can across these Pop! branded hard cases and wanted to know if anyone else has one or seen one in the wild and what there thoughts are.. The case looks great, but its a heafty $34.00 for one.
Link:http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I love the case, I have the black and grey version and I've been using it for just over 2 weeks now. The grey is a nice soft tactile grip and the main part of the case is a nice hard and smooth rubber compound that feels more like plastic then rubber. Fits the phone very nice, and its a dream to hold on to. But its a pain to take it out if you ever need to get access to the battery or memory card.
The only real con I found is that glossy black plastic scratches easily and shows the scratches but better the case then my phone.
Buttons are very easy to push and you don't have to struggle with them.
Now I have had one accident since I've had my case and I know it saved my phone from damage.
If there was an Otterbox Defender for out phone it would be over $60 and provide about the same protection. I'd would recommend this case.
I don't understand how people scratche their HTC!
Its the only devices that have unscratchable materials,I had an N1, DHD and now Sensation with no cases...never had any single scratches (apart the N1 screen)
Neostarchild said:
I love the case, I have the black and grey version and I've been using it for just over 2 weeks now. The grey is a nice soft tactile grip and the main part of the case is a nice hard and smooth rubber compound that feels more like plastic then rubber. Fits the phone very nice, and its a dream to hold on to. But its a pain to take it out if you ever need to get access to the battery or memory card.
The only real con I found is that glossy black plastic scratches easily and shows the scratches but better the case then my phone.
Buttons are very easy to push and you don't have to struggle with them.
Now I have had one accident since I've had my case and I know it saved my phone from damage.
If there was an Otterbox Defender for out phone it would be over $60 and provide about the same protection. I'd would recommend this case.
Click to expand...
Click to collapse
From the reviews I've seen this is a solid product... ill try it out
Sent from my Sensation 4g running amazingly awesome cm7
I have this one http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
and its been really good and had it for about 5 months.
knuhkles said:
Doing hours of research on all diffrent types of cases i can apon the theory that case-mate are some of the best cases for the phone.. but i can across these Pop! branded hard cases and wanted to know if anyone else has one or seen one in the wild and what there thoughts are.. The case looks great, but its a heafty $34.00 for one.
Link:http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Pop-Cases.asp
Click to expand...
Click to collapse
Love it. Adds bulk to the phone, but it looks dope so I don't mind. Mucho protection too.
Sent from my HTC Sensation 4G using xda premium
If you haven't made the purchase yet, take a look at the Seidio Active case for the sensation. I've had it about a week now and it is a fantastic case. Not too much bulk, cutouts are positioned perfectly, and buttons are easily accessible. Plus I bought the one with the kick stand built in, which is a nice extra feature.
Sent from my HTC Sensation XE with Beats Audio using XDA App
Just got this case today and its great.. adds a little bulk but it feels nice. Looks great also. Already got 3 compliments today. Very easy to put on and take off. Fits snug. Buttons push easy. Recommended to anybody that doesn't mind a little bulk.
Sent from my HTC Sensation Z710e using XDA App
Don't waste your money, when new looks awesome but it gets scratch very easy. I buy a Trident Aegis and have no regreet. SBME
deadpool2e said:
I have this one http://www.case-mate.com/HTC-Sensation-Cases/Case-Mate-HTC-Sensation-Tough-Cases.asp
and its been really good and had it for about 5 months.
Click to expand...
Click to collapse
I have tough case for 2 days now!! Awesome!! ^^
Love the rubber feeling more than plastic if compare to pop type. Avoid scratch i think.
Anyway, its quite difficult to get here in Malaysia. Almost all of the seller i ask had no stock!! Im quit lucky since when i buy this tough case is the last stock remain at the moment
Sent from my HTC Sensation Z710e using XDA App
Just received this case. Very nice and greatly built. Only minus is that back is scrach sensitive. And the phone becomes little bit "fat" (add 2-4 mm) Buttons is still very responsive and everything is fine.
I would recommend to buy from case-mate.com with coupon from http://www.retailmenot.com/view/case-mate.com
I have bought it with 25% helloween coupon and I have received my case in 9 days. (from USA to Lithuania).
In the end i'm attaching some photos:
http://i28.lulzimg.com/c3f9291e19.jpg
http://i28.lulzimg.com/d7449074e1.jpg
http://i28.lulzimg.com/55eacbd52f.jpg
http://i28.lulzimg.com/e6e0cc46a6.jpg
http://i28.lulzimg.com/03b0a4ae8a.jpg
Does anyone have a problem with plugging in the data cable?
I had the bottom one,and had to cut the edge of the shell of the cable to fit smoothly.
P.s. could be my cable is odd....
samo_ said:
Does anyone have a problem with plugging in the data cable?
I had the bottom one,and had to cut the edge of the shell of the cable to fit smoothly.
P.s. could be my cable is odd....
Click to expand...
Click to collapse
No problems at all.. the case has a pretty good sized cutout for the data cable.
Sent from my HTC Sensation Z710e using XDA App
saniauskis said:
Just received this case. Very nice and greatly built. Only minus is that back is scrach sensitive. And the phone becomes little bit "fat" (add 2-4 mm) Buttons is still very responsive and everything is fine.
I would recommend to buy from case-mate.com with coupon from http://www.retailmenot.com/view/case-mate.com
I have bought it with 25% helloween coupon and I have received my case in 9 days. (from USA to Lithuania).
In the end i'm attaching some photos:
http://i28.lulzimg.com/c3f9291e19.jpg
http://i28.lulzimg.com/d7449074e1.jpg
http://i28.lulzimg.com/55eacbd52f.jpg
http://i28.lulzimg.com/e6e0cc46a6.jpg
http://i28.lulzimg.com/03b0a4ae8a.jpg
Click to expand...
Click to collapse
Awesome... is there any new coupons for the case?
Sent from my Sensation 4g running amazingly awesome cm7
knuhkles said:
Awesome... is there any new coupons for the case?
Sent from my Sensation 4g running amazingly awesome cm7
Click to expand...
Click to collapse
FBlike20
SaveMore2011
cmretail10
I would offer SaveMore2011, here is savings table from their letter:
http://snpr.cm/lwKDey.png
Also I have received Tough Case and Barely There Case today from case-mate.
I can say POP! case is far the best, gives the best protection.
Barely There case is even funny. It has almost no protection from dropping the phone. It just makes 1mm protection from scraches.
And the tough case is like cheaper version of POP! version. And there isn't so much gum or silicone whathever the material inside is in the tough case that it is in POP!.
POP is far the best case for me yet (from case-mate production).
Another Coupon for site-wide 25% discount.
Cyber2011
I know this thread is a bit old, but just got this case in the mail today. From the experienced guys who have this case...what is the best way to start taking the case off?
Work from the bottom up? Bottom down? Or sides? For the life of me I have no clue Feel like I'm gonna split the phone in half, trying to get this on or off!
Thanks!
I am looking for a case that protects the top and bottom (To stop chipping). The case also has to look good with the black HTC One s and not scratch the phone like some TPU cases do. I like the CaseMate soft case but sadly it has no mic hole Hope someone can help!
The only cases that protect the bottom and top afaik are the silicone/rubber/gel type of cases.
Regarding the no hole for the microphone for the case mate soft and tough, it really isn't that much of an issue IMO and can be easily solved anyway using either a drill bit, eye letter punch or some other form of a cutting tool
See my review of the tough case here:
http://www.neowin.net/forum/topic/1072819-case-mate-tough/
Below are the results of using a drill bit to make a tiny hole (acting as a "mark") and the eye letter punch to make a "proper" microphone hole
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I actually think that this one looks kinda interesting:
http://forum.xda-developers.com/showpost.php?p=25717298&postcount=121
It would be difficult to obtain a D3O case outside of US/Canada. ^
I am waiting on this one to come in (ordered 5-5-12) After a recent unfortunate incident involving my Nexus S and a marble countertop + a 6" fall I am taking no chances. http://www.amazon.com/gp/product/B007U6EHXS/ref=oh_details_o01_s00_i00
I don't normally do anything except a screen protector but after watching my screen crack down the middle on my nexus s just a week ago I am not taking any chances with this beast of a phone. Just in casethe link doesn't work it is a ballistic case for HTC One S for about $17 from amazon.
You guys gotta wait for the otterbox case. Is not out yet but will be our soon
Sent from my One S.
I actually prefer the ballistic cases over the otterbox. Personally I don't like the complete coverage of the screen in the otterbox defender series and the commuter cases are almost exactly like the ballistic I ordered but the ballistic are generally cheaper and side by side they are just about the same save for some styling differences.
Sent from my HTC VLE_U using xda premium
This is the one I purchased and have been using for 3-4 days now and I have to say I'm really happy with the fit and finish of this case, especially considering I spent all of $5.55 on it
http://www.amazon.com/dp/B007TBG3Q8/ref=pe_175190_21431760_C1_cs_sce_3p_dp_1
edit: Just came across this option on engadget - http://www.engadget.com/photos/htc-one-s-cases/#5003047
pretty sweet huh
ktt4510 said:
I actually prefer the ballistic cases over the otterbox. Personally I don't like the complete coverage of the screen in the otterbox defender series and the commuter cases are almost exactly like the ballistic I ordered but the ballistic are generally cheaper and side by side they are just about the same save for some styling differences.
Sent from my HTC VLE_U using xda premium
Click to expand...
Click to collapse
Actually the Ballistic case is 4 cents more than the Otterbox.. see below
http://www.otterbox.com/HTC-One-S-C...4-CDY49_color=20&start=2&cgid=htc-one-s-cases
http://www.goballisticcase.com/products/htc-one-s-ballistic-shell-gel-sg-series-case
AndroidAlistair said:
I am looking for a case that protects the top and bottom (To stop chipping). The case also has to look good with the black HTC One s and not scratch the phone like some TPU cases do. I like the CaseMate soft case but sadly it has no mic hole Hope someone can help!
Click to expand...
Click to collapse
I am on my 3rd case since I got my phone a month ago.
The current one is by Diztronic (see the separate thread).
It is a TPU case so the top and bottom are protected, but it has a nice matt finish rather than the shiny effect of most gel cases. Would recommend!
edit: nvm...
Diztronic Matte
I'm thinking to buy the Diztronic Matte but it sais it's for the T-mobile version of the ONE S.
Do you think it will fit the GSM version as well?
It looks so cool.
sarkasha said:
I'm thinking to buy the Diztronic Matte but it sais it's for the T-mobile version of the ONE S.
Do you think it will fit the GSM version as well?
It looks so cool.
Click to expand...
Click to collapse
Yes. The Tmobile USA version is identical to the GSM Version.
sarkasha said:
I'm thinking to buy the Diztronic Matte but it sais it's for the T-mobile version of the ONE S.
Do you think it will fit the GSM version as well?
Click to expand...
Click to collapse
I have the Diztronic on my UK phone. Fits perfectly.
AndroidAlistair said:
I am looking for a case that protects the top and bottom (To stop chipping). The case also has to look good with the black HTC One s and not scratch the phone like some TPU cases do. I like the CaseMate soft case but sadly it has no mic hole Hope someone can help!
Click to expand...
Click to collapse
I'm only seeing the "Barely there case" for the One S on case-mate.com?
Sent from my BNTV250 using Tapatalk 2
Otter Box is popular now,but i am thinking about buying a iCarer genuine leather case for my One S,i like this retro style,and the coffee color.
http://www.lineglory.com/icarer-genuine-leather-case-for-htc-one-s.html
I was bored enough so here is a simple review of the Diztronic TPU case for the One X.
First impressions of it, it looks like most standard TPU cases. the one thing that really caught my eye was the matte backing and the glossy sides which imitates that of the phone how it has a matte back and glossy sides at least in the case of the grey version of the One X.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also shown in the pics you can see the cutouts for the rear speaker, headphone jack, power rocker, volume rockers, and USB port Which with them cut out like that they are super easy to press.
Fitment wise this thing fits the ATT One X like a dream, infact the fitment is so close it does take a little pressure getting the remaining two sides of the phone into the case.
an overall back view of the case installed, the cutouts for the rear speaker and the camera's LED are perfect, the camera isn't covered up all that great but, laying it on a desk or table it doesn't hit the camera bezel.
Heres a closer look of the camera area of the case when installed, as you can see the cutout is rather big but i have yet to have the lense or the bezel make contact with what the phone is resting on.
for the final picture i opted to take one with the screen protector installed just so everyone can see how it lines up. at the top its maybe a 1mm gap at the top and bottom, the sides have 4/5mm gap side to side, which i could live with, using a wet apply screen protector with this case WILL make the sides bubble up.
Overall, I love how this case feels when it is installed, how it feels in the hand. Almost like nothing is even on the phone, it's lightweight and very minimal bulk. The screen protector is a bit lacking on the sides but with the curved glass, what can you expect. Overall a very damn good case in my opinion hope you enjoyed the review.
Thank you for your review. Mine should arrive Monday.
Sent from my HTC One X using xda premium
Awesome review, thanks for taking the time to post this.
You'll have to forgive me here but I'm pretty colorblind... what color is that? lol
Mine fits very similar but is rocketfish from best buy...so how much was yours?
Sent from my HTC One X using xda premium
austin4913 said:
Mine fits very similar but is rocketfish from best buy...so how much was yours?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
They are less than $10 on amazon.
austin4913 said:
Mine fits very similar but is rocketfish from best buy...so how much was yours?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
After everything was said and done total came to: $12.40
_MetalHead_ said:
Awesome review, thanks for taking the time to post this.
You'll have to forgive me here but I'm pretty colorblind... what color is that? lol
Click to expand...
Click to collapse
I thought it would help some since I didnt see an actual review of the case but the one that I had bought was this one
"Matte Back Translucent Black"
i dont like the case at all, dust tends to get under the case some how... by looking at it, its not a tight fit but oh well, this will hold until i figure out what case i should buy
Koizuma said:
After everything was said and done total came to: $12.40
I thought it would help some since I didnt see an actual review of the case but the one that I had bought was this one
"Matte Back Translucent Black"
Click to expand...
Click to collapse
Cool. I generally despise TPU cases but I need something thin so I'm gonna give it a shot. Can't beat the price.
_MetalHead_ said:
Cool. I generally despise TPU cases but I need something thin so I'm gonna give it a shot. Can't beat the price.
Click to expand...
Click to collapse
I never cared to much for them either until i had my sgs2 with a incipio ngp, from there on i liked them. my normal choice for a case was otterbox but i didnt wanna put a bulky case on this slim device. so got to looking around on amazon and seen the diztronic.
Thanks for the review. I ordered two from Amazon. I've always like TPU cases, especially the ones made by Diztronic.
I had the white matte one for 3 days now. It fits perfectly just like op said. Light, beautiful.
Sent from my HTC One X using XDA Premium App
that's awesome i just ordered the clear one for my white hox yest. i'll take pics
chillsen said:
that's awesome i just ordered the clear one for my white hox yest. i'll take pics
Click to expand...
Click to collapse
yes please i'd love to see how this looks like in white. i hope its similar to the this one
I have been using the clear one on my white HOX as well.
It is pretty good, minimal bulk considering it is TPU and perfect fit, but it is still not as minimalistic as the official HTC clear hard case C700, but it will do the job fine till I get hold of the HTC one which fits AT&T XL phone, it will also be better because it protects the camera, the Diztronic case doesn't, or very minimal protection since it is cut outside the metal frame around the lens.
Just got mine in, color me surprised... I actually like it! This marks the very first TPU case that I don't mind having on my phone. Very slim, minimal bulk, and fits perfectly. My only complaint is that it makes the hardware buttons difficult to press but I can deal with that until something better comes along. I have like 6 other cheap cases enroute from China so we'll see when they come.
Ordered diztronic clear case on Tuesday, should be arrive on Saturday. I'm still waiting for the HTC hc v701 to be reviewed with att one x. Anyone tried it? Is it fit perfect with att model?
Sent from my One X using XDA
I really do like this case but the camera touches when it's laid on its back. Case quality is great. Dust does get behind it but since it's so easy to take off it's not a big deal. As long as you can remember to put your phone face down your fine with this case.
+1 to this case...MUCH better than the orange plastic one from HTC that I had....
Can't beat this deal off Amazon for 10 bucks
Also the clear version of this case with the white HOX looks great!
This TPU case looks nice. I am a fan of matte type of products! I just placed in my order through ebay. Thank you for sharing!
I like the case aside from the fact that its pretty fricken dirty after only 4 days. Gonna try to clean with alcohol wipes. Anybody have other suggestions?
Sent from my HTC One X using xda premium
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=306
Also comes in white for now
Here it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The plastic is very very very smooth like butter, but has friction between hard surfaces..so if you stick the phone in your hand with the case on itll slide if you move your hand back & forth..the edge of the case barely covers the phones curved glass, Im guessing to put it in and tale it out, has no play,and just seems like a good ol' hardcase
The more i handle it,the plastic should get grippier, ill update on that
No snap,crackle,pop noises from this case, put it on and done
+1 to a simple case, as my first case for the phone its clean&simple
Looks like the sides come up farther than on the ringke case. But looks good otherwise.
-EP
Just got the same case last night. I HATE using cases but this one is really nice. I would absolutely recommend one. Fits like a glove and feels great. It doesn't attract lint like some plastic cases.
Sent from my Nexus 4 using xda app-developers app
OP, could you please provide links, price and color options if possible thanks
Thanks for the pics. How easy is it to get on and off?
galaxys said:
Thanks for the pics. How easy is it to get on and off?
Click to expand...
Click to collapse
No problem taking it off, easy
Ordered mine just waiting is the edges pretty sharp??
ssnr said:
Ordered mine just waiting is the edges pretty sharp??
Click to expand...
Click to collapse
...no,
Add another thumbs up to the Diztronic. My first case from them I, that I decided to get based on comments here. So far the best case I've seen for the Nexus 4 (at least until a decent 2-component case like the Otterbox Commuter etc. comes along).
Nexus 4 Diztronic Hardshell Case Review
$9.99- Amazon Link
$9.99- Diztronic Link
Design
5/5
First of all, this case is EXTREMELY thin. It's only 1mm thin, making it 25% thinner than the original TPU case. The back has a non glossy Diztronic logo on it and a slot cut open for the camera and speakers. It is a bit slippery, but won't catch lint on it or attract finger prints. Unlike other shell cases, this one isn't hard to take in and out. However, you definitely want to take it out periodically to make sure debris doesn't get caught in it and scratch the case. The edges of the case just barely go over the screen making a bit of a "lip". The lip is barely there and you may be able to fit a screen protector on it. The buttons are left exposed on the case making pressing the power button and volume rockers very easy.
Protection
4/5
This case does a decent job at protecting the phone while still keeping a thin profile. The top and bottom of the case are left somewhat vulnerable, yet I understand how it would be tough to cover that part while making the case a "hardshell". Keep in mind this case is only 1mm thick, so I'm grading the protection based on the case's target audience.
Final Verdict
4.5/5
This may be the thinnest case to ever hit the market. At $9.95 you get a lot of bang for your buck; this is a high quality case made with premium materials. You can tell Diztronic took the time to make sure they got everything right. This case is so thin you won't even notice it while still giving you some protection.
Def the best case so far, for the money
Mod wanna merge this w/ my video review thread?
Nxxx said:
Mod wanna merge this w/ my video review thread?
Click to expand...
Click to collapse
Have copied your video and review post into this thread, closing your other thread as this was already available when you posted today.
Thanks
AvRS
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Nxxx said:
Nexus 4 Diztronic Hardshell Case Review
Click to expand...
Click to collapse
Hi, do you happen to have the similar Rearth Ringke and Nilkin Matte Hard Cover cases? If so, comparing all 3 in detail in one video would be AWESOME and help everyone in this forum, I think...
androidfoshizzle said:
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yep I am using it with a Seidio Surface holster. Looks and feels great! Aside from the speaker alignment, it's my fav case. It actually took me away from the official bumper because now I get a holster which has a smaller footprint when on my belt lol.
Mods should combine all diztronic related threads,.. TOO MANY OF THE SAME TOPICS
Sent from my Nexus 4 using Tapatalk 2
:beer:
Sent from my Nexus 4 using Tapatalk 2