Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys
Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.
thanks suki
I'll give it a try
does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?
I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nº FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls
If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.
I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08
ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru
envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...
Hey guys,
Recently I've tried to port CWM to my device following this tutorial and it bricked...
It did not boot in any mode (Recovery, Fastboot or Normal) after doing this (stuck on motorola logo/boot menu).
@diego-ch helped me and he managed to flash the XT920_2_290_2014 back on my device and unbrick it, but I want to install XT920_2_310_2014 back.
There are some Stock ROMs available on the internet, but these ROMs are outdated compared to my original ROM...
The ROMs available are: XT920_2_290_2014_A01_MP (Tim Brazil) and XT920_2_290_2009_A01_MP (Retail), and my original ROM was XT920_2_310_2014_A01_MP.
The backup script in this tutorial created a few files files: recovery.img, system.img, boot.img...
What I want to know is...
Is there any way to "reflash" these backups to my device?
Here is a printscreen from my original ROM:
https://dl.dropboxusercontent.com/u/82392755/OriginalROM.jpg
And a printscreen from the "new" ROM:
https://dl.dropboxusercontent.com/u/82392755/NewROM.png
Thank you!
Your in the wrong forum man.
Sent from my PACMAN MATRIX HD MAXX
Hello all.
I'd like to know if there's any custom roms for Karbonn A2+. I'm already guessing the answer is a "No" so I'd like to know if/how I can port any rom with JB firmware and any CWM to my device (Please tell me what rom should I take to port
The device runs on 4.0.4 ICS, with 1ghz 256mb ram, and a 4" WVGA capacitive touch screen. I've rooted it via Framaroot and am using an additional 1gb of swapped ram.
Thanks in advance.
Bump, is there anyone who can point me to the correct guide to follow?
Your phone?
What is your phone?
I mean what phone are you using?
the model and the brand?
I'm facing the same problem.
hardware config.of a2+are- mt6575 with kernel 3.0.13
brand- alps , model- A2+
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
shantz said:
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
Click to expand...
Click to collapse
Interesting, could you please dump the rom?
"Jellyfish"?
Root & cwm for karbonn a2+
It is a simple procedure, but it took long time for me to make it work.
Points to consider
a. After flashing my phone didn’t boot. I just flashed only the recovery, I think that would caused the problem, later I re-flashed the stock rom boot img separately).worked !
b. Instead of backup copy I tried with the stock rom imgs, It worked for me. If you don’t want to lose any data please use your phone backup copy img files.
c. I am not a developer & don’t know how the stuffs work inside the mobile, with the help of XDA contributors & developers forum messages, I was able to do something.
d. Please do read the rooting & flashing guides thoroughly.
e. Please don’t panic if something goes wrong. Stock rom is available, flash it & you get your mobile back.
ROOTING & BACK UP
1.Frama root will give you the root rights ! - http://forum.xda-developers.com/showthread.php?t=2130276
Download & Install - open it choose install super user, then click "boromir" success message will appear, click ok and reboot your phone. You can see a message "android is updating" after you reboot your phone.
2. Dowload MTKdroid lastest version (older version also fine)-sorry I couldn’t find any working links
Backup your stock rom using MTK droid tool, before making any changes to the stock OS. MTK droid tool may ask you to root again. Please read rooting and flashing instructions thoroughly before doing any changes.
a. Install MTKdroid tool in your pc & open it, If the tool asks you to root, click root, in couple sec or mins yellow signal will turn green.
b. Click on the “Root,backup,recovery & then click backup – Please wait till the process completes
If the message says “end with error” – The backup copy will not help us to re-flash the OS
(I tried many times, but I am not able to flash the backup copy with SP flash tool, gives me some error.
(for making CWM the above copy is fine, because I hope there won’t be any error when the software creates a backup for boot.img & recovery.img)
c. Ok assuming that there is no error, the next step is Click on the button “To prepare blocks for Flash tool” – wait till it completes. This process will gives us the entire copy of the rom to flash it with SP flash tool – Can find the backups in MTKdroid tools /backups/ Karbonn-A2+_number _date_backup_ folder/file to flash tool. (MTKdroid tool is required to create CWM, so don’t close the MTKdroid tool)
d. No stock roms were available when I was testing that time, so I ended up with the service center. Thanks to XDA member “Forever Alone”. Now working stock rom is available.
3.CWM CREATING & PORTING
a. Select “To choose the boot.img file & click recovery & boot. Software will ask you to select the boot.img. Select the boot.img from the backup copy in MTKdroid tools /backups/Karbonn-A2+_ _backup_ /file to flash tool.
b. Click Yes - To make CWM automaticllay
C. Click yes - If phone isn't loaded, it is ness to flash this file...to phone? Software may show a write error, just leave it for now.
e. Click NO - Install created recovery to phone ?
Copy of the recovery & boot img will be in MTKdroid tools /recovery
Now CWM has been created & that needs to flashed via SP flash tool
4. Flashing CWM recovery
Download SP flashtool - http://forum.xda-developers.com/showthread.php?t=1982576
Copy the scatter file from Mtkdroid backup folder to mtkdroid recovery folder to avoid confusion in selecting the image files.
Open SP flashtool – Select the scatter file from mtkdroid recovery folder & flash it. You are done. Now you can see the auto made CWM instead of stock recovery
attachment has screen shots-please refere that to this section
5.Download the stock rom from - http://forum.xda-developers.com/showthread.php?t=2520719
Extract the files & store it in separate folder.
Any custom rom for karbonn a2+
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
hi.. im using karbonn a2+ mtk 6575 device .i downlaod lewa os for karbonn a11 as same specification of karbonn a2+. but installed that succefully. but stuck in boot logo..but im not ported this rom.i just change boot image only.. what is the problem??
hi bro im mtk developer. we can port rom for a2+
Sent from my Karbonn A2+ using XDA Free mobile app
hi
Sent from my Karbonn A2+ using XDA Free mobile app
i ported two roms
ViKtory36 said:
Bump, is there anyone who can point me to the correct guide to follow?
Click to expand...
Click to collapse
hii
Custom ROM
Guys I found an awesome website for Getting custom ROMs for almost all karbonn and celkon devices try it..................
h t t p://androcustomroms.com/
Can you tell me step by step how to gain root access to karbonn A2?
Sent from my HTC Desire 616 dual sim using XDA Free mobile app
[email protected] said:
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
Click to expand...
Click to collapse
can you please post here the cwm recovery image for karbonn a2+ here..
My karbonn a2+ show this while installing
E:signature verification failed
Installation aborted.
what to do now?
It doesn't work with any ROM.
I have an Alcatel one touch idol mini and messed it up trying to flash something while the device was on and now i need a way to flash stock rom for it and a stock rom if you can(i'm noob whit things like this) i can get to the stock recovery mode and i need a software to flash rom back and the rom... i have downloaded something but i don't know if it is what i need... it is a .tar.xz file(opened with winrar)
P.S.: My device is locked to Orange Romania
byseby said:
I have an Alcatel one touch idol mini and messed it up trying to flash something while the device was on and now i need a way to flash stock rom for it and a stock rom if you can(i'm noob whit things like this) i can get to the stock recovery mode and i need a software to flash rom back and the rom... i have downloaded something but i don't know if it is what i need... it is a .tar.xz file(opened with winrar)
P.S.: My device is locked to Orange Romania
Click to expand...
Click to collapse
You should use this : http://www.alcatelonetouch.com/fr/downloads/otu/mobile-upgrade-s-4-0-6-setup.exe
Thanks, but this don't work for my phone (an other operator (Sosh)), do you have another idea please ?
Thanks
Hello,
I want to flash my phone at-as45ips (rebrand of Amoi N821) to a miui version. the only issue is that i dont know how to backup my stock rom and stock recovery. Because when i install CWM does it overwrite my current recovery or not. So yes how do i back it up. i have a MediaTek chipset. And i followed this tutorial gathering.tweakers.net/forum/list_messages/1540730 (dutch) but its a little unclear at some points. I hope you can help me.