Hello all.
I'd like to know if there's any custom roms for Karbonn A2+. I'm already guessing the answer is a "No" so I'd like to know if/how I can port any rom with JB firmware and any CWM to my device (Please tell me what rom should I take to port
The device runs on 4.0.4 ICS, with 1ghz 256mb ram, and a 4" WVGA capacitive touch screen. I've rooted it via Framaroot and am using an additional 1gb of swapped ram.
Thanks in advance.
Bump, is there anyone who can point me to the correct guide to follow?
Your phone?
What is your phone?
I mean what phone are you using?
the model and the brand?
I'm facing the same problem.
hardware config.of a2+are- mt6575 with kernel 3.0.13
brand- alps , model- A2+
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
shantz said:
hey guys.. i got karbonn A2+ replaced via company..
they have gave me mt6577 board with 1.3 Ghz and jellyfish 4.2.2
Click to expand...
Click to collapse
Interesting, could you please dump the rom?
"Jellyfish"?
Root & cwm for karbonn a2+
It is a simple procedure, but it took long time for me to make it work.
Points to consider
a. After flashing my phone didn’t boot. I just flashed only the recovery, I think that would caused the problem, later I re-flashed the stock rom boot img separately).worked !
b. Instead of backup copy I tried with the stock rom imgs, It worked for me. If you don’t want to lose any data please use your phone backup copy img files.
c. I am not a developer & don’t know how the stuffs work inside the mobile, with the help of XDA contributors & developers forum messages, I was able to do something.
d. Please do read the rooting & flashing guides thoroughly.
e. Please don’t panic if something goes wrong. Stock rom is available, flash it & you get your mobile back.
ROOTING & BACK UP
1.Frama root will give you the root rights ! - http://forum.xda-developers.com/showthread.php?t=2130276
Download & Install - open it choose install super user, then click "boromir" success message will appear, click ok and reboot your phone. You can see a message "android is updating" after you reboot your phone.
2. Dowload MTKdroid lastest version (older version also fine)-sorry I couldn’t find any working links
Backup your stock rom using MTK droid tool, before making any changes to the stock OS. MTK droid tool may ask you to root again. Please read rooting and flashing instructions thoroughly before doing any changes.
a. Install MTKdroid tool in your pc & open it, If the tool asks you to root, click root, in couple sec or mins yellow signal will turn green.
b. Click on the “Root,backup,recovery & then click backup – Please wait till the process completes
If the message says “end with error” – The backup copy will not help us to re-flash the OS
(I tried many times, but I am not able to flash the backup copy with SP flash tool, gives me some error.
(for making CWM the above copy is fine, because I hope there won’t be any error when the software creates a backup for boot.img & recovery.img)
c. Ok assuming that there is no error, the next step is Click on the button “To prepare blocks for Flash tool” – wait till it completes. This process will gives us the entire copy of the rom to flash it with SP flash tool – Can find the backups in MTKdroid tools /backups/ Karbonn-A2+_number _date_backup_ folder/file to flash tool. (MTKdroid tool is required to create CWM, so don’t close the MTKdroid tool)
d. No stock roms were available when I was testing that time, so I ended up with the service center. Thanks to XDA member “Forever Alone”. Now working stock rom is available.
3.CWM CREATING & PORTING
a. Select “To choose the boot.img file & click recovery & boot. Software will ask you to select the boot.img. Select the boot.img from the backup copy in MTKdroid tools /backups/Karbonn-A2+_ _backup_ /file to flash tool.
b. Click Yes - To make CWM automaticllay
C. Click yes - If phone isn't loaded, it is ness to flash this file...to phone? Software may show a write error, just leave it for now.
e. Click NO - Install created recovery to phone ?
Copy of the recovery & boot img will be in MTKdroid tools /recovery
Now CWM has been created & that needs to flashed via SP flash tool
4. Flashing CWM recovery
Download SP flashtool - http://forum.xda-developers.com/showthread.php?t=1982576
Copy the scatter file from Mtkdroid backup folder to mtkdroid recovery folder to avoid confusion in selecting the image files.
Open SP flashtool – Select the scatter file from mtkdroid recovery folder & flash it. You are done. Now you can see the auto made CWM instead of stock recovery
attachment has screen shots-please refere that to this section
5.Download the stock rom from - http://forum.xda-developers.com/showthread.php?t=2520719
Extract the files & store it in separate folder.
Any custom rom for karbonn a2+
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
hi.. im using karbonn a2+ mtk 6575 device .i downlaod lewa os for karbonn a11 as same specification of karbonn a2+. but installed that succefully. but stuck in boot logo..but im not ported this rom.i just change boot image only.. what is the problem??
hi bro im mtk developer. we can port rom for a2+
Sent from my Karbonn A2+ using XDA Free mobile app
hi
Sent from my Karbonn A2+ using XDA Free mobile app
i ported two roms
ViKtory36 said:
Bump, is there anyone who can point me to the correct guide to follow?
Click to expand...
Click to collapse
hii
Custom ROM
Guys I found an awesome website for Getting custom ROMs for almost all karbonn and celkon devices try it..................
h t t p://androcustomroms.com/
Can you tell me step by step how to gain root access to karbonn A2?
Sent from my HTC Desire 616 dual sim using XDA Free mobile app
[email protected] said:
how can i install custom roms on karbonn a2+ i rooted my mobile and i have cmw recovery on my mobile.. any os available for karbonn a2+. karbonn a1+ support custom xperia rom but y any one make custom for karbonn a2+. plzz kindly help me..
Click to expand...
Click to collapse
can you please post here the cwm recovery image for karbonn a2+ here..
My karbonn a2+ show this while installing
E:signature verification failed
Installation aborted.
what to do now?
It doesn't work with any ROM.
Related
hey guys I am meeth and i just want some of your time and help ..........
SEE
i was running my mmx A110 on a stock 4.1.1 rooted jb rom which was flashed with sp tools .
now i just wanted to go to suvi so i decided that it might be good if i downgraded and then root my deviceagain installing custom recovery {CWM}
but the problem is whenever i downgrade or upgrade my rom i need to restore my IMEI because it just shows that my cell has an invalid IMEI so i HAVE TO INSTALL MOBILEUNCLE TOOLS.
SEE NOW HERE IS WHEN THE TROUBLE STARTS
1> I downgraded with sp flash tools ..... successful.
2> Rooted my device ..........................successful.
3> tried to install MOBILE UNCLE TOOLS......... installed but not opening.
So then i formated the phone with flash tools and then again flashed 4.0.4 then tried to install mtk but still no success [installed but not opening]
tried other app but they open without any problem.
SO GUYS NOW I AM TOTALLY F***ED
PLEASE
NEED HELP AS SOON AS POSSIBLE AS I AM A COLLEGE GOING STUDENT AND NEED IT FOR MANY PURPOSES
Download your IMEI Tool from http://www.4shared.com/rar/WoSqcSEm/MauiMETA_exe_3G_v612441.html
Download MT6577 BPLGU Modem files for Imei change From http://www.4shared.com/rar/V7xgInCK/BPLGUInfoCustomAppSrcP_MT6577_.html
Download Video Tutorial From http://www.4shared.com/rar/HjJSDVfd/MTK_Android_IMEI_Write_VIDEO_T.html
Gve it a try
you will find inside both the version of meta tool
http://www.moulnisky.com/index.php?dir=Micromax/A110/IMEI WRITING TOOL/
meeth said:
hey guys I am meeth and i just want some of your time and help ..........
SEE
i was running my mmx A110 on a stock 4.1.1 rooted jb rom which was flashed with sp tools .
now i just wanted to go to suvi so i decided that it might be good if i downgraded and then root my deviceagain installing custom recovery {CWM}
but the problem is whenever i downgrade or upgrade my rom i need to restore my IMEI because it just shows that my cell has an invalid IMEI so i HAVE TO INSTALL MOBILEUNCLE TOOLS.
SEE NOW HERE IS WHEN THE TROUBLE STARTS
1> I downgraded with sp flash tools ..... successful.
2> Rooted my device ..........................successful.
3> tried to install MOBILE UNCLE TOOLS......... installed but not opening.
So then i formated the phone with flash tools and then again flashed 4.0.4 then tried to install mtk but still no success [installed but not opening]
tried other app but they open without any problem.
SO GUYS NOW I AM TOTALLY F***ED
PLEASE
NEED HELP AS SOON AS POSSIBLE AS I AM A COLLEGE GOING STUDENT AND NEED IT FOR MANY PURPOSES
Click to expand...
Click to collapse
To all the new members i request not to qoute the full post....instead qoute a part of it or make a direct reply..or otherwise it makes the thread really ugly.
Problem solved
It is a problem with the MTK Mobile Uncle tools. Download a old version of the app. It will work. If u dont have i am uploading in general section now. Download from there
hi firends i have celkon a118 . i changed my phone osrecently. i need the stock rom can any one help me please?
surendra204 said:
hi firends i have celkon a118 . i changed my phone osrecently. i need the stock rom can any one help me please?
Click to expand...
Click to collapse
no one is here to help? please upload the stock rom if any one has this phone.
hello friends finally i have managed to flash my celkon a118 with stock rom. I am writing the procedure to some one who is needed. I am staring this post as assuming that you have minimum idea of how to flash your phone. if not please search about basics. please undesstand that i am not responsible for any damage to you phone.
1. downloaded many stock roms none of them are worked. finally i downloaded from the android xda site.
here is the link http://xdafirmware.com/celkon-a118
2. install drivers. i face bit difficult in this aspect. it is easy to install pdanet software in net and connect your working phone to pc.
3. In the firmware file there is a mtk flash tool. if you are comfortable do that or try sp flash tool.
4. while flashing you will get checksum error. the solution is delete checksum file and flash now.
5. the checksum file is in the downloaded file>flashtool>sp>checksum.ini(configuaration file)
6. flash now better to use firware upgrade. once i tried flash all and download then my imei is failed then i write my imei with mauiMETA software.
thank you and enjoy.:good:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Reserved
error
abhimortal6 said:
reserved
Click to expand...
Click to collapse
not installed...pmt change for this rom..must download this
Working but after installing i "Revoke USB debug authorization" got vanished
Revoke usb debugging authorization is vanished from my developer menu. And i am not able to connect ADB anymore.
It just not asking for any authorization anymore. I tried all adb drivers also pdanet. Still nothing.
I know it's sounds stupid. I mean how can a recovery effect such things.
Right now i need help... Please
oem unchecking is what plese tell me i don't know how to do flash using sp flash tool
oem unchecking is what plese tell me i don't know how to do flash using sp flash tool. after loading scatter file unchecking boxes or not to do. i m getting pmt change error. and my device is getting disappear
try to flash another rom
#aam_aadmi
https://drive.google.com/file/d/0B9tb9NtbHirvMFMtd1ZMczNiRjQ/view?usp=sharing
try this link . copy paste this link into another tab. u hv to flash custom rom or port another rom like emui .. stock rom is hard to get root..
My device was not booting after flashing the Lollipop patch. I had to flash the entire ROM.
Recovery have big issue
1.) I found that philz recovery does not work at all my device when flash via mobile uncle tool device screen becomes white after reboot and when i remove battery and power on then mobile bootloop on logo
2. while flashing with sp flash tool say pmt change error
3. and when upgrade firmware mob become bricked
is there wrong with preloader in stock rom. Is it tested or not
or is compatible with T03 ver 5.0.1 lolipop rom named as (firmware 5.1 mmx e313 unlocked) which have i download
monuamitonline said:
1.) I found that philz recovery does not work at all my device when flash via mobile uncle tool device screen becomes white after reboot and when i remove battery and power on then mobile bootloop on logo
2. while flashing with sp flash tool say pmt change error
3. and when upgrade firmware mob become bricked
is there wrong with preloader in stock rom. Is it tested or not
or is compatible with T03 ver 5.0.1 lolipop rom named as (firmware 5.1 mmx e313 unlocked) which have i download
Click to expand...
Click to collapse
Select Formatt all +download in sp flash tool[emoji1]
Sent from my E313 using XDA-Developers mobile app
1st step
pavanbarod said:
not installed...pmt change for this rom..must download this
Click to expand...
Click to collapse
Unlock Bootloader first
sir how can upgrade android lollipop to andrid marshmallow in canvas xpress 2
WE can also flash a custom recovery for Xpress 2 through Rashr Flash tool..........I'm going to make a tutorial on it.........We just need the recovery.img file nd its done..
plz tell how to unlock bootloader of micromax canvas xpress 2
plz tell how to unlock bootloader of micromax canvas xpress 2
abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313
Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Click to expand...
Click to collapse
in rooting process is the touch screen recovery will come after patch download....
and can my mobile turn on normally after installing this patch file without installing zip file....
Anuj47 said:
in rooting process is the touch screen recovery will come after patch download....
and can my mobile turn on normally after installing this patch file without installing zip file....
Click to expand...
Click to collapse
abhi g tell me please.....
abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313
Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Click to expand...
Click to collapse
abhi g kya zip file ko recovery mode me sp flash tool k sath install ni kiya ja skta?
agar ha to kaise?
ajeet_singh said:
plz tell how to unlock bootloader of micromax canvas xpress 2
Click to expand...
Click to collapse
did you get this?
abhimortal6 said:
Lollipop Root And Recovery Patch For Micromax Canvas Xpress 2 E313Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Kernel
This Guide Has Been Moved To " Xpress 2 Guide App" .
An App For Xpress 2 Users Only.
Contains All Detailed Guide For Rooting , Roms Installing
Flashing Stock Rom etc .
To Read This Guide With Proper Instructions.
Download App From Link Given Below.
Download Xpress 2 Official Guide App
.
Click to expand...
Click to collapse
hey Abhi I downloaded your app. It is very helpful. Thankyou for making that app. I have the custom recovery now. But when I opened the stock rom option nd tried to download , it showed error 404. Please fix the error or provide a link for stock recovery of both the variant.
hi guy I bricked my device after porting wrong rom in cmw recovery but before that I backup my stock rom
I not found stock rom in web except stock rom within zip protected with password this uploaded by someone called: sumonbd
I'm attempting to find it but no result or find password. that stock rom is alone.
detail of my tablet device
model: CCIT A799W (china tablet)
cpu: mediatek 6572
motherboard:HX-M706M-MB-V1.1.0
android: jelly bean 4.2.2
how to flash my tablet with cwm backup???
NOTE: backup cmw folder contain : 1_ (system.ext4.rar) 2_(boot.img) 3_(cash.ext4.rar) 4_(data.ext4.rar) 5_(nandroid.md5) 6_(recovery.img) 7_(system.ext4.rar)
what do for unbrick my device
thanx for Q&A members
Hey guys i had already rooted my device micromax canvas fire4 a107 and was then flashing the zip file of super su binary update with the help of a ported twrp custom recovery and after flashing when i rebooted my device it is stuck on the canvas logo. Pls guys help me what to do. I am very much stressed.
Flash the stock firmware.
phone stuck on boot logo.
Hey guys help me!!!
I flashed a custom recovery and custom ROM on Micromax Canvas Fire 4 (A107) without issues. But now I wanted the stock ROM so I downloaded a stock ROM that can be flashed from lpmtk.blogspot.in after flashing it got stuck on the boot logo "Canvas" and the recovery too changed to stock cwm.
Can I restore a nandroid back up of another A107 to get my phone back running?? If so someone please share a nandroid backup of micromax canvas fire 4(a107)
munimjaffer said:
Flash the stock firmware.
Click to expand...
Click to collapse
my recovery is stock recovery and i am unable to flash anything with it and also i am not able to find stock rom for my devive if u got the link then pls... do reply.. !
Firmware is flashed using pc.
munimjaffer said:
Flash the stock firmware.
Click to expand...
Click to collapse
nosroD said:
Hey guys help me!!!
I flashed a custom recovery and custom ROM on Micromax Canvas Fire 4 (A107) without issues. But now I wanted the stock ROM so I downloaded a stock ROM that can be flashed from lpmtk.blogspot.in after flashing it got stuck on the boot logo "Canvas" and the recovery too changed to stock cwm.
Click to expand...
Click to collapse
Hey Nosrod which rom did u flash and y do u want the stock rom again did the previous rom have bugs?!?!
munimjaffer said:
Firmware is flashed using pc.
Click to expand...
Click to collapse
Plss sir can you teach me how..
amitbatflarrow said:
Plss sir can you teach me how..
Click to expand...
Click to collapse
First of all download the firmware http://bit.ly/1X1pf2E
How to Flash
Step 1: Download and extract the stock firmware on your computer.
Step 2: Download SP Flash Tools.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
amitbatflarrow said:
Hey Nosrod which rom did u flash and y do u want the stock rom again did the previous rom have bugs?!?!
Click to expand...
Click to collapse
I was flashing a stock ROM zip with custom recovery which I downloaded from canvasfire4.WordPress.com On flashing the stock ROM my recovery also changed to stock and won't boot.
I tried flashing with sp flash tools but it is stuck on 0%
Do you Need Help
Hey nosroD
I would like to help you in this dilemma , Do you need my help.
I own a Micromax Canvas Fire 4 (A107)
Similar problem
I am having similar problem with my Micromax A107 phone. I rooted my phone with the help of King-o-root app and just underclocked my CPU. After this , I just rebooted my device and it won't boot again. It just stuck at the logo and not booting into recovery mode either.
I haven't tried to flash anything. Just rooted and underclocked the CPU. I think that it's not because of underclocking the CPU because the settings would be applied 20 seconds after the completion of boot.
Previously , my Lenovo a369i too had a similar problem.