+
Max doesn't have bootloader lock. only cube have RSA lock.
So below information about RSA is wrong.
I'm so sorry about wrong information...
+
I don't have Max, so i can't say sure, but it will work properly.
0. Download attachment and exctract it.
1. Connect USB to Max.
2. Check USB debugging.
3. Execute Rooting.bat
4. After put some files, Max will reboot. then press and hold volume up button to go to S/W Upgrade mode.
If you fail, try manually. turn off your max. and while hold volume up button, connect usb to Max.
5. Execute LGMobile Support Tool. and after check the connection with Max, Customer Support - Recovery phone. Reocovery phone function doesn't affect your data.
If LGMobile Support Tool isn't installed, Execute B2CAppSetup for install support tool.
6. When upgrade progress more then 9%, type enter.
upgrade will start after download kdz complete.
+
If you see 'Fail to find file' and use Win7, execute Rooting.bat with administrator permission. or try with WinXP.
+
Below is for development.
Max's upgrade way is
1. Extract wdb.
2. Extract AP and CP files and don't remove.
3. Do upgrade using AP and CP files. remove files after upgrade.
So we can modify AP binary before it is putted to Max.
+ Wrong
Because Max have RSA lock likely Motorola phones, we can't modify boot or recovery partition.
(OMAP... so RSA... It seems 1024bit... )
+
But we can modify system partition. So we can try to find some useful file that is executed with root permission.
That is hdcp.sh, in system partition. (/system/hdcp.sh)
This file will be modified likely
# hdcp.sh
#
# [email protected], [email protected] , [email protected]
#
# HDCP sh file
->
#!/system/bin/sh
###################
# Execute rooting sh!
/data/local/rooting.sh
###################
that.
/data/local/rooting.sh install su and busybox.
hdcp.sh is in LGP720_AP[02].bin. and MaxRoot.exe find that hex data, and modify.
Location of LGP720_AP[02].bin
Win7 : C:\ProgramData\LGMOBILEAX\Phone\LGP720_AP[02].bin
WinXP : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGP720_AP[02].bin
You can use MaxRoot.exe put Phone folder directly.
If AP file isn't there, you put MaxRoot.exe into another folder that AP file is extracted. and execute MaxRoot.exe. It also check executed folder.
I think that it can use with KDZ Tool also... maybe ? ;;
Hello hPa ^^
Sent from my LG-SU760 using XDA
kenazz said:
Hello hPa ^^
Sent from my LG-SU760 using XDA
Click to expand...
Click to collapse
Hi, kenazz!! ㅋ
i Don't understand the exact procedure to do with tool MaxRoot... you may make a guide step by step? Many Thanks!
rainbow2112 said:
i Don't understand the exact procedure to do with tool MaxRoot... you may make a guide step by step? Many Thanks!
Click to expand...
Click to collapse
Oh, I'm sorry about my unkindness... ... T^ T..
I add how to root. almost whole words were for developer... Oh my;;
Maybe you can root now you follow step by step. Rooting.bat will also print how to root. ...
985hPaKicK said:
I don't have Max, so i can't say sure, but it will work properly.
0. Download attachment and exctract it.
1. Connect USB to Max.
2. Check USB debugging.
3. Execute Rooting.bat
4. After put some files, Max will reboot. then press and hold volume up button to go to S/W Upgrade mode.
If you fail, try manually. turn off your max. and while hold volume up button, connect usb to Max.
5. Execute LGMobile Support Tool. and after check the connection with Max, Customer Support - Recovery phone. Reocovery phone function doesn't affect your data.
If LGMobile Support Tool isn't installed, Execute B2CAppSetup for install support tool.
6. When upgrade progress more then 9%, type enter.
upgrade will start after download kdz complete.
Click to expand...
Click to collapse
MaxTool show Fail to find file when type enter after after the LG Mobile Support has more 9% upgrade... sorry for my bad english,..
rainbow2112 said:
MaxTool show Fail to find file when type enter after after the LG Mobile Support has more 9% upgrade... sorry for my bad english,..
Click to expand...
Click to collapse
..
Try this pls.
if you use Win7, pls execute Rooting.bat with administrator permission.
or
Try on other computer. WinXP is good for you.
if you failed above two method, Pls do this.
When upgrade progress more then 9%, Enter directory
Win7 : C:\ProgramData\LGMOBILEAX\Phone
WinXP : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
and see some files are generated. specially LGP720_AP[**].bin, LGP720_CP.fls. if you can't find them, search C: (windows is installed) about LGP720_AP while Recovery phone.
and talk to me wherer files is exist.
985hPaKicK said:
..
Try this pls.
if you use Win7, pls execute Rooting.bat with administrator permission.
Click to expand...
Click to collapse
If i key right > run as administrator gave me error
So I activated the super-administrator in win 7 ( from the dos prompt: Net user administrator /active:yes)
reebooting my Netbook, double-click on Rooting.bat .... the procedure is successful!!!! P720 now is root!!!
MANY, MANY THANKS Bro!
rainbow2112 said:
If i key right > run as administrator gave me error
So I activated the super-administrator in win 7 ( from the dos prompt: Net user administrator /active:yes)
reebooting my Netbook, double-click on Rooting.bat .... the procedure is successful!!!! P720 now is root!!!
MANY, MANY THANKS Bro!
Click to expand...
Click to collapse
Cool!
and Thank you for testing rooting tool!
How about try CWM Recovery? ...
ehm, no, because i do no know if it works the CWM of the O3D... I prefer to wait for official news about it
rainbow2112 said:
ehm, no, because i do no know if it works the CWM of the O3D... I prefer to wait for official news about it
Click to expand...
Click to collapse
Ah, It doesn't mean use CWM for O3D.
http://forum.xda-developers.com/showthread.php?t=1642635
I make CWM for O3D Cube(SU870) that Max(P720) for Korea, republic of.
(likely P920 - SU870, P720 - SU870)
I can install and run without problems on my MAX the CubeRecovery attached in that thread ?
---------- Post added at 05:58 PM ---------- Previous post was at 05:10 PM ----------
CubeRecovery NO-WORK on MAX, after installed , tap on Cube 2nd-init Recovery, and them tap on Reboot Recovery..the device remain in Black screen . The same if try to hold 3D button+ vol down and power on.
edit 3. i'm unistalled CubeRecovery but now no more possible enter in recovery-mod of LG
edit 4: i try data factory reset, now the MAX is briked ( screen remain black forever)
rainbow2112 said:
I can install and run without problems on my MAX the CubeRecovery attached in that thread ?
---------- Post added at 05:58 PM ---------- Previous post was at 05:10 PM ----------
CubeRecovery NO-WORK on MAX, after installed , tap on Cube 2nd-init Recovery, and them tap on Reboot Recovery..the device remain in Black screen . The same if try to hold 3D button+ vol down and power on.
edit 3. i'm unistalled CubeRecovery but now no more possible enter in recovery-mod of LG
edit 4: i try data factory reset, now the MAX is briked ( screen remain black forever)
Click to expand...
Click to collapse
have you tried to restore it in emergency mode with lg tool?
rainbow2112 said:
I can install and run without problems on my MAX the CubeRecovery attached in that thread ?
---------- Post added at 05:58 PM ---------- Previous post was at 05:10 PM ----------
CubeRecovery NO-WORK on MAX, after installed , tap on Cube 2nd-init Recovery, and them tap on Reboot Recovery..the device remain in Black screen . The same if try to hold 3D button+ vol down and power on.
edit 3. i'm unistalled CubeRecovery but now no more possible enter in recovery-mod of LG
edit 4: i try data factory reset, now the MAX is briked ( screen remain black forever)
Click to expand...
Click to collapse
So...Sorry T.T T.T T.T T.T T.T T.T
You can exit recovery by remove /system/recovery_mode.
but ... T.T....
LGMobile Support Tool's Recovery phone can reocvery your Max.
Pls try this.... T.T;
Method of go to S/W Upgrade mode is that,
1. Turn off your phone.
2. While press and hold volume up button, connect USB.
I'm very sorry ... T.T ...
Yes, MAX recovered now with LG tool i'm lost root... but this night re-try the procedure with MaxRoot ..
rainbow2112 said:
If i key right > run as administrator gave me error
So I activated the super-administrator in win 7 ( from the dos prompt: Net user administrator /active:yes)
reebooting my Netbook, double-click on Rooting.bat .... the procedure is successful!!!! P720 now is root!!!
MANY, MANY THANKS Bro!
Click to expand...
Click to collapse
At the third attempt before with w7, and then xp,I managed to make the root with w7 and super administrator,thanks to the board of rainbow2112.
A super thanks to people without phone like 985hPaKicK can do miracles!!!!
testina said:
At the third attempt before with w7, and then xp,I managed to make the root with w7 and super administrator,thanks to the board of rainbow2112.
A super thanks to people without phone like 985hPaKicK can do miracles!!!!
Click to expand...
Click to collapse
felice di esserti stato di aiuto.
I'm happy to have been helpfull for you.
Now waiting for 3d max CWR
Inviato dal mio LG-P720 con Tapatalk 2
help me repair the problem sms only send 80 words.
i can root Su760 LG 3D Cube ???
Does this tool can root it ?
Related
For those who are not satisfied with 5.1 or stuck in bootloop, here a way back.
For the bootloop:
First you need to have the boot and recovery.img of 5.1 flash in fastboot. For an open bootloader is required!
- Fastboot.zip download and unzip.
- The fastboot folder to the hard disk on which you have installed Windows, move.
- Switch off (Vol - and press Power until it vibrates).
- In Windows, click Start - All Programs - Accessories, select Command Prompt.
- In the window cd .. and press Enter while typing up her only the drive letter (C: \>) see.
- Now you give a cd fastboot and Enter . In order for her in the folder.
- Now that off with Mate Vol - to the PC.
- Now you give fastboot flash boot boot.img and Enter, then fastboot flash recovery recovery.img and Enter.
This means that both you have flashed.
- Now disconnect the device on and off with soft Vol + Power.
- Then you can proceed with the instructions.
For users whose system is running:
- Download and unzip this file. The Update.app contained therein in the dload folder to the SD.
- This flash now.
- Now the Update.app the B137SP03 in dload folder and flash
- After that the device starts again with 4.4.2.
Have Fun.
Question?? To use this commands
fastboot flash boot boot.img
fastboot flash recovery recovery.img
We need a unlocked bootloader???
Yes, for the bootloader must be open.
I can't unlock the bootloader... get errors in Huawei web to generate the unlock code...
Read times so that * # * # 1357946 # * # * the ID and use the displayed. Simply enter via the telephone keypad.
Fooox1 said:
Read times so that * # * # 1357946 # * # * the ID and use the displayed. Simply enter via the telephone keypad.
Click to expand...
Click to collapse
Ok I will try... but the mt7-l09 don't appear on the website??
Select the Y300-0100 as unit.
Fooox1 said:
Select the Y300-0100 as unit.
Click to expand...
Click to collapse
Says : "please input the correct product id"
I have tried every method and don't works
Can´t install it stops at 95%, and i get this message "update post process failed" What can i do?
djzero86 said:
Says : "please input the correct product id"
I have tried every method and don't works
Click to expand...
Click to collapse
use the id gererator app
netons said:
Can´t install it stops at 95%, and i get this message "update post process failed" What can i do?
Click to expand...
Click to collapse
Check everything and try again. Important in which step it jammed !? With such short sentences can not help you.
rowihel2012 said:
use the id gererator app
Click to expand...
Click to collapse
i try using the Product id Generator and dont works... try to change time zone in windows to hong kong and nothing...
Fooox1 said:
Check everything and try again. Important in which step it jammed !? With such short sentences can not help you.
Click to expand...
Click to collapse
Thanks Foox1, Its working perfect, even i had this error at 95% on the first UPDATE.APP, and i did not have the 300 roll back version when rebotting, i succeded installing 137SP03 after that at the end i installed B141 and everything was perfect.
I think B141 is the best update by now... i got very good performance and battery life... try it.
---------- Post added at 10:02 AM ---------- Previous post was at 09:55 AM ----------
djzero86 said:
i try using the Product id Generator and dont works... try to change time zone in windows to hong kong and nothing...
Click to expand...
Click to collapse
It did not work for me either, i sent a code request to [email protected] and i got this answer:
Dear Customer,
Thank you for supporting Huawei device. My working number is 3102.Your bootloader unlock code :##############，please keeping your unlock code properly. Thank you!
I got this reply from [email protected], give ir a try.
You have to send all your device information.
Product type: Smartphone
Product model: Huawei Ascend Mate 7 (MT7-L09)
Product SN: #########
Product IMEI/MEID: #########
Product ID: #######
Fooox1 said:
For those who are not satisfied with 5.1 or stuck in bootloop, here a way back.
For the bootloop:
First you need to have the boot and recovery.img of 5.1 flash in fastboot. For an open bootloader is required!
- Fastboot.zip download and unzip.
- The fastboot folder to the hard disk on which you have installed Windows, move.
- Switch off (Vol quietly and press Power until it vibrates).
- In Windows, click Start - All Programs - Accessories, select Command Prompt.
- In the window cd .. and press Enter while typing up her only the drive letter (C: \>) see.
- Now you give a cd fastboot and Enter . In order for her in the folder.
- Now that off with Mate Vol quietly to the PC.
- Now you give fastboot flash boot boot.img and Enter, then fastboot flash recovery recovery.img and Enter.
This means that both you have flashed.
- Now disconnect the device on and off with soft Vol + Power.
- Then you can proceed with the instructions.
For users whose system is running:
- Download and unzip this file. The Update.app contained therein in the dload folder to the SD.
- This flash now.
- Now the Update.app the B137SP03 in dload folder and flash
- After that the device starts again with 4.4.2.
Have Fun.
Click to expand...
Click to collapse
I can't understand the second part.
First we flash the update.app we take from the folder "Mate 7 (Jazz-L09) V100R001C900B308-Transition_Pack"
Then we flash the second update.app with the B137 firmware?
Yes, the first matches of the bootloader and the recovery, the second flashes the entire system.
Fooox1 said:
Yes, the first matches of the bootloader and the recovery, the second flashes the entire system.
Click to expand...
Click to collapse
Me I'm in 5.1. I will do and the 2 parts? Or only the second part?
If your system is running, then do it all from here:
For users whose system is running:
Fooox1 said:
If your system is running, then do it all from here:
For users whose system is running:
Click to expand...
Click to collapse
If my system running, you mean I'm running the lollipop, right?
Yes, if 5.1 is running and want to back 4.4.2. The first part is for users who have made it wrong, and the system will not boot.
I do the second part but nothing is happend. First I install the first file "update.app" then my phone reboot and then I install the second file update.app from B137, my phone reboot again but nothing it happens.
---------- Post added at 05:35 PM ---------- Previous post was at 05:21 PM ----------
Ok! I think I do it! I had change the recovery file yesterday with someone wrong, so I install from bootloader the right one! Thank you!!
u can ROOT H959 V15a/H959 v15c andriod 5.1.1 version official Using LG h955 v15a rooted system image.i did mine lg H959 twn v15a and h959 twn v15c /v15E official root ^^.
THis thread http://forum.xda-developers.com/g-flex2/development/lg-g-flex-2-ls996-zv6-sprint-5-1-1-t3169212
Follow his instruction :
lease follow these instruction closely...also not responsible for brick or anything that happens to your device..do this at your own risk.
1. Ensure you have the proper drivers for your phone. If you don't, download and install the proper drivers.
2. Extract the file you downloaded for your phone, and move the resulting "rootedsystem.img" file to the root of your phone's internal SD card with MTP mode. Do not rename this file, or move it into any folders. If you don't get a file named "rootedsystem.img" DO NOT continue. You need to properly extract the file.
3. Download the LG_Root.zip in the second post .. ((thanks to @Unjustified Dev https://www.androidfilehost.com/?fid=24052804347788843 ))
4. Download and unzip the LG_Root.zip in your preferred location
5. Enable ADB debugging on your device
6. Power off your device, When the device is powered off, hold volume up and insert a USB cable connected to the PC Wait for the drivers to install
7. go to the LG_Root folder (the one you downloaded) Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
8. In the root of LG_Root folder start a command promp (Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here")
9. In the command window type the command "Send_Command.exe \\.\COM4" (no quotes)......(NOTE: change"4" to ur diag port number from step 8.
10. Type "id" and press enter (no quotes). You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and do step 10 again (the application sometimes doesn't respond on the first command).
11. Run the command specified for ur varient in the section below titled to flash the rooted system image.
12. After a few minutes of sitting, you should get back a "#" prompt. This indicates the process has finished.
13. Type "LEAVE" (no quotes) and press enter. Your phone should reboot, and your phone will be rooted.
Now that you're rooted, MAKE SURE YOU DISABLE OTA UPDATES, if you accidentally take an OTA, you might not be able to roll back or fix it.
You can also delete the rootedsystem.img from your phone's internal SD card to save some space.
thanks to @TheAxiks @Sj12345 @Feltox and @randrew87
For International H955 (V15a) [ this worked for H959 V15a and h959 v15c too]
Code:
Step 11 Code:
dd if=/data/media/0/rootedsystem.img bs=8192 seek=53248 count=458752 of=/dev/block/mmcblk0
Rooted system Image
H955-V15a
https://drive.google.com/file/d/0B6EBFSa68t8tMnlLbEdBTmdPVXM/view?usp=sharing
LG_Root link:
https://www.androidfilehost.com/?fid=24052804347788843
Thx> Originally Posted by kevin3688 [ H959v15E Stock Rooted system.img (15E - Hong Kong/Singapore) ]
https://drive.google.com/file/d/0B0U...ew?usp=sharing
Thanks, but one qu, when I try to download from Mega Rooted System img, Mega asks for decryptionkey??
The link to the thread is broken for me
lasset said:
Thanks, but one qu, when I try to download from Mega Rooted System img, Mega asks for decryptionkey??
Click to expand...
Click to collapse
https://mega.nz/#!nI8HGLDD!oOf15ZVjVTWh3z8BGZU2dAAin2o41E4f1vEoxVemB9o
Kidsnd274 said:
The link to the thread is broken for me
Click to expand...
Click to collapse
http://forum.xda-developers.com/g-flex2/development/lg-g-flex-2-ls996-zv6-sprint-5-1-1-t3169212
Have not tested root method yet, but will try soon. Please post results.
dan_man555 said:
https://mega.nz/#!nI8HGLDD!oOf15ZVjVTWh3z8BGZU2dAAin2o41E4f1vEoxVemB9o
http://forum.xda-developers.com/g-flex2/development/lg-g-flex-2-ls996-zv6-sprint-5-1-1-t3169212
Have not tested root method yet, but will try soon. Please post results.
Click to expand...
Click to collapse
Its work on mine H959, use h955 15a image. but urs H959 will become H955 after root/update. ^^
lasset said:
Thanks, but one qu, when I try to download from Mega Rooted System img, Mega asks for decryptionkey??
Click to expand...
Click to collapse
u need to open with Chrome or firefox. IE not work. choose "DOwnload through browser".
naymyoaung said:
Its work on mine H959, use h955 15a image. but urs H959 will become H955 after root/update. ^^
Click to expand...
Click to collapse
Will it cause any problems like storage space reduction or carrier network signal becomes bad or batter life issues?
Kidsnd274 said:
Will it cause any problems like storage space reduction or carrier network signal becomes bad or batter life issues?
Click to expand...
Click to collapse
Its work fine on mine ，no error or problem.
Didn't work
Nope ain't working. No progress bar in Download Mode. Softbricked it. Luckily managed to flash it back using LG Flashing Tools 2014 works using normal mode. I mean on H959.
Xele79 said:
Nope ain't working. No progress bar in Download Mode. Softbricked it. Luckily attempt to flash it back using LG Flashing Tools 2014 works using normal mode. I mean on H959.
Click to expand...
Click to collapse
Its will not show progres bar at download modecoz its fast about30sec， After u enter command its will show “# “ this then type “LEAVE“ for restart phone.
latest firmware is h95915b_00, is it safe to root it with with method?
mailwl said:
latest firmware is h95915b_00, is it safe to root it with with method?
Click to expand...
Click to collapse
i dunno, try n see ^^, coz mine is v15a TW
naymyoaung said:
Its will not show progres bar at download modecoz its fast about30sec， After u enter command its will show “# “ this then type “LEAVE“ for restart phone.
Click to expand...
Click to collapse
Yeah that I did. After "LEAVE" command it restarted and then boot loop with "Security Error" every time.
Just 1 question: Do I need to upgrade my firmware to V15a first before performing this?
Xele79 said:
Yeah that I did. After "LEAVE" command it restarted and then boot loop with "Security Error" every time.
Just 1 question: Do I need to upgrade my firmware to V15a first before performing this?
Click to expand...
Click to collapse
Yes
hi
how i can easy root gflex h959 rooted ??
naymyoaung said:
Yes
Click to expand...
Click to collapse
IT WORKED. Lol my bad for not upgrading the firmware first. Was trying this on V10c. Thanks a lot
Hello, And Thanks
I Just Tried It With My V15b ITs Work Fine
dan_man555 said:
https://mega.nz/#!nI8HGLDD!oOf15ZVjVTWh3z8BGZU2dAAin2o41E4f1vEoxVemB9o
http://forum.xda-developers.com/g-flex2/development/lg-g-flex-2-ls996-zv6-sprint-5-1-1-t3169212
Have not tested root method yet, but will try soon. Please post results.
Click to expand...
Click to collapse
Is the rooted system img.rar corrupt? When I try to open it with 7zip it says it can't open it as an archive.
EDIT: Apparently it extracts via WinRar. Strange.
h959
lol_cool88 said:
Is the rooted system img.rar corrupt? When I try to open it with 7zip it says it can't open it as an archive.
EDIT: Apparently it extracts via WinRar. Strange.
Click to expand...
Click to collapse
It gives error for me that the file is corrupted or not a valid archive
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
ahmedfraz4u said:
It gives error for me that the file is corrupted or not a valid archive
Click to expand...
Click to collapse
Please give me a different download location
and sometime it ask for a encryption key
Please help me anyone.
ahmedfraz4u said:
It gives error for me that the file is corrupted or not a valid archive
---------- Post added at 02:40 PM ---------- Previous post was at 02:37 PM ----------
Please give me a different download location
and sometime it ask for a encryption key
Please help me anyone.
Click to expand...
Click to collapse
here new link https://drive.google.com/file/d/0B6EBFSa68t8tMnlLbEdBTmdPVXM/view?usp=sharing
1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all
Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
xposed worked with me and now erorr
sorry for that but it solved try agine
since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now
elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now
elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device
yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated
elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me
elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better
I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you
a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?
Thank U.
OTA update v363 Ok. Thank U.
Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.
That's why you always do a backup before doing such dangerous things, bre. You should be ok by following @firemax13 "restore to factory state" guide https://forum.xda-developers.com/general/rooting-roms/lenovo-vibe-k6-note-guide-rooting-t3602763 (of course you should jump the unroot part and start at "turn the phone to download mode".
c00kiie said:
Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.
Click to expand...
Click to collapse
@c00kiie
Ok that's a huge problem for you try to restore your phone here's the link https://forum.xda-developers.com/general/rooting-roms/lenovo-vibe-k6-note-guide-rooting-t3602763
Scroll down until you see my post related to restore.....yeah we have a stock rom but the problem you can't flash it via twrp....i will reply the method to restore your phone...
hope you understand...pls dont forget to subscribe my thread and hit like if it is working....it if is not working just tell me
---------- Post added at 06:44 AM ---------- Previous post was at 06:41 AM ----------
c00kiie said:
Hello guys I hope you had a good day.
I recently tried to root my device but it didn't work and got into a loop boot. Later I wiped /system and /cache and some other important parts [Because of my lack of experience with phones] , Now the phone is OS-Less. I tried to search for a Stock ROM for 3 days but couldn't. Now I just have TWRP. What should I do? I just want anything that works right now, no specific needs.
EDIT: I also have Fastboot installed as well.
Thanks for helping me.
Click to expand...
Click to collapse
Here's the method from my xda friend hope you success it
RESTORE PHONE TO FACTORY STATE
source: https://forum.xda-developers.com/ge...ide-restore-stock-recovery-rom-6-0-1-t3599360
Click to expand...
Click to collapse
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Phone : In Developer Options >
Code:
>Turn on USB debugging
>Enable Oem Unlock
1. Uninstalling Root
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
Click to expand...
Click to collapse
2. Turn Phone To Download Mode.
Hold down together the Volume Up + Power button for a while. Release power key after lenovo logo shows up. On the menu select download. Download Mode dont have any screen. Screen is blank but working.)
Connect phone to PC
Click to expand...
Click to collapse
3. Flashing Rom
Unrar 5_K53_S123_170216_ROW_STOCK.rar (Latest) or 5_K53_S116_161115_ROW_STOCK.rar (Testing OTA)
Unrar 4_QcomDLoader.rar Open folder. Click and open QcomDloader.exe
On Downloder Window Click load button. (First on top left)
Select the directory of the rom files (The directory numbered 5 which contains many img files) Click OK.
Click settings button. (Second on top left)
Dont change anything. I was pre entered the options. Check the values. If wrong, correct.
Code:
Manifacture Order: EMPTY (Important)
Download Mode: UPGRADE
Chipset: 8937
Downloaded Rom: CHECKED
eMMC Programmer: prog_emmc_firehose_8937_ddr.mbn
Raw Program: rawprogram0.xml
patch0: patch0.xml
Click OK.
Click Start button. (Third on top left)
Status becomes Downloading. Wait for a while. Flashing finishes around 400-500 seconds.
Status becomes Finish. Progress Passed.
Disconnect the phone. Close the Downloader on PC.
Press Power button 10 seconds on phone. Device is restarting.
Wait a few minutes. Phone will be opened to first install mode . In language selection screen Shutdown the phone by pressing power button.
Click to expand...
Click to collapse
4. Installing ADB
Install 1_adb-setup-1.3.exe to the pc. (Select > Yes > Yes > Yes > Yes. In the opened window click Install)
Click to expand...
Click to collapse
5. Locking the Bootloader.
Restart phone in fastboot mode. (Hold down power + Volume DOWN keys. Fastboot Mode appairs left top of the screen.)
Connect phone to PC
Adb directory now located in C Drive. Open adb folder. Open a command window here. (CRTL+SHIFT right click on empty space. Select Open Command Prompt Here)
Type:
Code:
fastboot devices
then press enter. (Your device must be listing like: s356d3a9 fastboot)
Type:
Code:
fastboot oem lock
(OKAY [ 0.031s] finished. total time: 0.031s)
Type:
Code:
fastboot oem device-info
Control all options are false.
Disconnect the phone. Restart phone by pressing power button 10 seconds.
Finished...
Click to expand...
Click to collapse
This rom contains no bloatware except Lenovo Help (a.k.a Lenovo Companion)
Hit likes if working.:good::good::good::good::good::good::good:
If your phone has a trouble just post a message here.
DO IT YOUR OWN RISK I WILL NOT HANDLE ANY BRICK BUT YOU CAN POST A MESSAGE TO ME
Preparation:
1. A memory card
2. One computer, and the spreadtrum driver has been installed (how to determine whether the driver has been installed, in fastboot mode to see whether there are unrecognized devices in the device manager can be).
3. The phone is in debugging mode
Start work:
1. Download duoqin1splus. rar, extract the duoqin1splus. rar and copy updata.zip to the local directory for backup;
2. Connect the phone to the computer (make sure there is a memory card inside!), uncompress DuoQin1SPlusRecovery. Rar, run runme.bat;
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;
4. Select "Apply update from external storage." select "update.zip" to copy to the memory card.
5. After the brush is finished, it is forbidden to double clean; select "reboot system" directly;
6. Wait for restart to enter the interface.
If you need to reset the phone, please go into the Settings to restore the factory Settings after the phone starts up normally. I will not be responsible for the repair of the jammed screen caused by double clear. Remind yourself not to listen. It's your own business.
Issues to note:
1. This kind of thing is mostly made out of feelings (yes, mobile phone has been repaired 2 times, and this test will be repaired again).Do not use for commercialization, once found, I will pursue the responsibility of commercial pirates.
2. After starting up each time, the recovery of the mobile phone will be restored to the official recovery. If you have other needs for using the mobile phone, please follow the steps in the beginning work and start over again.
3. Once the system is modified, ota update cannot be installed, please note;
4. Swiping machine is risky, please be careful.
You can read the original at: myworldbooks.cn/archives/683
Download link: pan.baidu.com/s/1d84F1SCgpauisG-6dr1x6w
Code: 74ex
Unpackage code:
George_20190813
------------------------------------------------------------------------------------------------
20190928 update
Flash program & package
Download link: pan.baidu.com/s/19YQiV69j2IPpyi-PL21VuQ Code: 8d7g
Offical Package
Download link: pan.baidu.com/s/1dwotU5e6rsX220plCDGqPA Code: hk7i
All the information which had updated was in the source page: myworldbooks.cn/archives/683
in addition:
who can provide me fdl1 and fdl2 files of sc9820e? thanks.
can someone help to host the files onto another website? don't have access to baidu
many thanks!
https://drive.google.com/open?id=1aqz-BmlwImyGeZvnd_9XMyVbwApgoui4
thank you both! managed to install whatsapp by following the steps!
you guys are great!
I followed the steps in the guide and I am stuck at step 3. On this step
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;
My phone is entering fastboot, however there are no selection within the fastboot whatsoever. How do I restart and enter Recovery mode?
I tried holding the power button, it restarted but it entered the normal boot.
Tried to restart again and hold 8 still the same.
Can anyone help? I followed all the steps.
I can confirm it.
Following these steps the phone enters fastboot, but without automating restarting on Recovery mode.
Also on fastboot there no option for manual restart on Revovery mode.
Any help will be welcome.
Tool for Qin 1s and Qin1s +
Install Qin 1s and Qin1s + Applications
Getting root rights to 1s + version
Backup partitions on 1s + version
Quick reboot commands
gaguga said:
Tool for Qin 1s and Qin1s +
Install Qin 1s and Qin1s + Applications
Getting root rights to 1s + version
Backup partitions on 1s + version
Quick reboot commands
Click to expand...
Click to collapse
Thanks for your work. it's useful. :good:
I hope you do not mind i had been sharing your programs in my blog.
thank you!
jcbwlsnlee said:
I followed the steps in the guide and I am stuck at step 3. On this step
3. The phone will automatically enter fastboot, restart and enter the Recovery mode. Press "8" to enter the main interface of Recovery (don't double clear!Do not double clear!There is no Recovery mode to resume the previous step!;
My phone is entering fastboot, however there are no selection within the fastboot whatsoever. How do I restart and enter Recovery mode?
I tried holding the power button, it restarted but it entered the normal boot.
Tried to restart again and hold 8 still the same.
Can anyone help? I followed all the steps.
Click to expand...
Click to collapse
So sorry reply you too late. Your could press the power button when your phone hold on the fastboot mode. If you can't enter in the recovery mode, may be your adb.exe is using or derive of fastboot has some problems. Please check and fix them.
The source page in Chinese and the origin flash programs was updated. it may solve your problems.
NickTheGreek said:
I can confirm it.
Following these steps the phone enters fastboot, but without automating restarting on Recovery mode.
Also on fastboot there no option for manual restart on Revovery mode.
Any help will be welcome.
Click to expand...
Click to collapse
Please check off your drives when your phone is under the fastboot mode, and ensure the adb.exe is not in using.
Thanks man, It's working now!
0xA said:
Please check off your drives when your phone is under the fastboot mode, and ensure the adb.exe is not in using.
Click to expand...
Click to collapse
---------- Post added at 09:54 AM ---------- Previous post was at 09:47 AM ----------
Also, does anybody know a workaround solution in order to make the OTA updates working again?
NickTheGreek said:
Thanks man, It's working now!
---------- Post added at 09:54 AM ---------- Previous post was at 09:47 AM ----------
Also, does anybody know a workaround solution in order to make the OTA updates working again?
Click to expand...
Click to collapse
I had updated some new packages to solution the problem about the OTA updated after cracked phone, and you can view the source page to find them.
If your phone version is not in list on the source page, please recover to the recently official system and crack phone again.
By the way, you can make a package to delete the PackageInstaller.odex and put a new PackageInstaller.apk which is download from Google official and the app's file name is not same with the preset PackageInsatller.apk, after that, Using the cracked recovery to install the package, OTA update will be normal and phone could install any application also. (App must support Andriod 4.4.4).
Thanks!
But i don't have access to baidu.
0Xa, please, help to recover device! I try method from 29 sep, something rong, now my phone is bootloop. is there any solution for repair!?!
Reload software 1.2.2 and other files on filehost, can't download from Baidu.
ikoko said:
0Xa, please, help to recover device! I try method from 29 sep, something rong, now my phone is bootloop. is there any solution for repair!?!
Reload software 1.2.2 and other files on filehost, can't download from Baidu.
Click to expand...
Click to collapse
Do not worry. If your phone is under the bootloader (fastboot mode), just long press the button of power, and waiting for device to reboot to the phone desktop. The drive of bootloader (fastboot mode) which has not been installed well may cause that.
And i'm sorry to tell you that the accessibility function is disabled in this phone, so the talkback tool may not be available. but i helped you to feedback this question to DuoQin official support. before official solve it, may be there has another way to solve this problem when the phone has rooted.
I had updated all file in Mega. and you can download it from this url: https://mega.nz/#F!64VV1IQB!k3F1pQCcT3W94fUblPH7eA. Hope it's will help you.
NickTheGreek said:
Thanks!
But i don't have access to baidu.
Click to expand...
Click to collapse
I had updated all files in Mega, and u can also download from https://mega.nz/#F!64VV1IQB!k3F1pQCcT3W94fUblPH7eA.
0XA, i can't enter in fastboot mode, my phone is on permanent reboot. How can i enter in fastboot or recovery mode by key combination? please, write me e-mail on Duoqin support!
Thanks and regards.
@0xA can ya help me to get root and gapps for Qin2 please?
Add more language
Can anyone help me how to add language. The device only supports English and Chinese I need Hebrew language (mainly for typing sms) Is it possible to add additional languages (keyboard) via root access?