[Kernel][GB][OC/UV][HDMI-MHL] !NEW! Synthesis Kernels <2013-04-30>, plus Infusion-Z
Please post only bugs and testing results on this thread. For general questions and answers visit ---> Infusion-Z and Zen kernel Q&A
*** Synthesis: The only GB kernel you need for your Infuse ***
New features
This set of kernels is a combination of the stock UCLB3 kernel, with all mods from the Infusion-Z kernel (see below), some mods from Entropy's DD, and more. New features include:
- Fix for the wifi drain bug (aka bt-amp bug). In the event that this bug occurs, the kernel triggers a reset of the wifi interface, which stops the bug and saves battery.
- Wifi roaming code from the international SGS2 (roam_api) replacing the stock bcmccx logic. Reduces the incidence of the wifi drain bug. This config is less agressive in seeking out new access points, so you may need to open the wifi config screen in settings to speed up the connection process.
- External SD card (/sdcard/external_sd) is now available in CWM recovery and can be used as a source to flash CWM zip packages
- Entropy512's fast charging hack is included (thanks!)
- SIO and BFQ I/O schedulers added from Entropy's DD (thanks!)
- Voodoo lagfix lady 2.0 :good::good:
- Kernels are attached to this post (CWM flashables) including stock CPU frequencies - 1.2Ghz - and two OC options - 1.4Ghz and 1.6Ghz. If you prefer to flash them using SGS Kernel Flasher, you can download a bundle containing all three >>here<<
-------------------------------------------------------------------------
- Overclocking and Undervolt support - thanks to bedwa's prior work
- CoreA cpu speeds - 1600, 1200, 800, 400, 200, 100
- CoreB cpu speeds - 1400, 1000, 800, 400, 200, 100
- Voodoo sound driver, voodoo lagfix - courtesy of project voodoo
+ [cifs support] see post #29 for info on how to use cifs
+ [Removed auto-install of superuser] you can get the current su cwm flashable here: http://androidsu.com/superuser/
+ [HDMI/MHL support] using mhl adapter you can play video on most TVs and monitors with a HDMI port
+ [Video support] newer roms no longer need video reverts to allow video to record or playback
+ [External sdcard fix] corrected issue which prevented external sdcard access in some cases
+ [cfq i/o scheduler tweaks] added optimization tweaks for cfq scheduler
+ [Boot animation fix - partial] this is a work in progress - see notes below
NOTES:
Intended for use *ONLY* with stock-based GB ROMs. For CM7, CM9, and CM10 check project OPs for proper setups.
OC/UV requires use of an app like Voltage Control, CPU master, or SetCPU. Read up before jumping in - you can lock or damage your phone with incorrect settings. Remember to save your boot settings in Voltage Control menu to ensure your settings stick.
To get boot animations to show correctly: In /system/media copy sanim.zip to bootanimation.zip. I plan to automate this in a future release.For tips on overclocking and related performance and battery tweaks see the q&a thread.
Important! - Video restore and revert packages are intended only for users of current ROMs with stock library files who have previously applied a revert package to get video to work. If you haven't done this, or are unsure, flash only the kernel package of your choice.
Links to install packages for the first release can be found on post #3.
Source code is available on my github (see signature).
Be safe and always make a backup before flashing!Standard Disclaimer: All packaged builds are provided with no guarantees as to their safety. By flashing, you assume any and all potential risks that running a custom kernel might entail.
Recommendations: Wipe cache and dalvik-cache when flashing a new kernel. Disable any oc/uv settings from phone before flashing a new kernel.
Overclockers/Undervolters: If your phone is unstable when running at a particular overclock speed, choose a lower max cpu speed - not all phones have the same ability to handle oc speeds. When undervolting, do your research first and make small changes.
Big thanks to those who helped test this and prior kernels: qkster, mikig_mkd, boogman7, scott.hart.bti, aeonit, mikig_mkd, nwinfuse, texcowboy, tankmorph, prairied0gg, madman_sle, cmeyal, atk, and jdt352 Thanks to bedwa, entropy512, linuxbozo, and netarchy who laid the foundation (and built the house) - especially bedwa and entropy for helping me out along the way. Visit their threads and say thanks:infusion kernel development by bedwa --> infusion kernels
daily driver kernel development by entropy512 --> entropy daily driver
Remember the multicians - http://www.multicians.org/ (if you know, you know.. If you don't, you should)
Click to expand...
Click to collapse
.•...•.•.••.••.•.••....•.••.•••..••...••.••.•..•.• ••.....••....•.•••.•...••..•.•..•......••••..•.••. ••••.•••.•.•.•••..•..•••..••.••..•.•.••.••...••..• •...•......••..••..•••..•..••.••••.••.••.•..•..... .••.••.•.••..•.•.••.•••..•••.•...••....•.••.••.... •......•••..••.••.••...••....•.•••.••..••..•.•.••• ..•..••••..•..•.••....•......••.•••..••.••••.••.•• •..••..•.•..•......••...•..•••.•.•.•••.•....•..... .••.••••.•••.•.•.•••..•..•••..••.••..•.•.••.••...• ••.••..••..•.•.•••..••..•......••...••.••....•.••. •••...•......••..••..•••..•..••..•.•.••..•.•..•... ...••.••••.•••.•.•.•••..•...•......••.••.•.••.•..• .••.•••..••..•..
Change, Issue, and Enhancement Logs
Change log
2013.04.30 - UCLB3+Infusion+DD, Fix wifi battery drain bug, Change wifi roaming code to sgs2 roam_api, Add support for /sdcard/external_sd from CWM recovery, Add Entropy's fast charging hack, Add BFQ and SIO schedulers from Entropy's DD, Upgrade voodoo lagfix voices.
2012.05.20 - Add HDMI/MHL support (for external video playback), add video support for current ROM firmware (UCLB3/UCKL2 - No more need for Video Fix!), add correct vold.fstab definitions for currrent firmware (mounts external sdcard correctly), initial bootanimation fix (not 100% - need to copy "sanim.zip" to "bootanimation.zip" in /system/media in some cases), add CFQ I/O scheduler tweaks (better performance)
2012.05.05 - Add cifs support, remove auto install of Superuser, change initramfs compression to lzma, add video lib mod option packages for vidcam rec/play
Click to expand...
Click to collapse
Known Issue log
- Flashlight function disabled in quick panel after use of video record or playback (restored by taking a flash photo, turning on flash using "Tiny Flashlight" app, or reboot)
- Some reports of random screen color change after disconnecting charger (restored by lock/unlock or reboot aka "faerie snot") [Fixed with the UCLB3 base - 4/30/13]
- Some reports of racing CPU on ROMs with tweaks [Racing CPU issues appear to be caused by modifying "ro.ril.xxxxx" cellular radio settings in build.prop. To fix, remove those tweaks (referencing a standard UCLB3 build.prop), or flash a near stock rom like r.e.v.e.n.a.n.t ]
Click to expand...
Click to collapse
Planned enhancements
- Improve auto-detect of boot animation files?
- Add support for BLN Lights?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
•.•.••..•.•.•••••.••....•.••....•.••...•••.••••.
Information and Prior Release Mirrors
reference materials
governor, i/o scheduler, & tuning info
Click to expand...
Click to collapse
prior release mirrors
2012.05.05 - initial "z" kernel release (mirror)
cwm-infusion-gb-z-corea2-videofix.zip
cwm-infusion-gb-z-corea2.zip
cwm-infusion-gb-z-coreb2-videofix.zip
cwm-infusion-gb-z-coreb2.zip
cwm-uclb3-videolib-revert.zip
big thanks to those who helped test this release: Qkster, ppalbicke, bigfau, and aeonit
Click to expand...
Click to collapse
Click to expand...
Click to collapse
.••...•..••..•.•.•••.•••.••....•.•••..•..••..•.•..•......•••.•...••.•....•••..•..••....•.••.•.••.••.•.••.••.••••.•••..•..••••.•..••.••••.••..•••..•....•
Nice, bro. First.
edit: Alright. Now that I got the 1st post after op claimed, I will add some more relevant info.
Nice work, Zen. I know you've been putting a lot of time into this.
Let me be the first to say thank you.
I hope this will be the first of several new additions.
Kernel development is a task onto itself.
Kernel devs are a rare breed indeed.
Thank you for taking the time to give us some options.
Now we have the options of OC and retained some video capacity, even though we are using older libs.
Can't want to see what you can do. It will be a beautiful moment to see a stable OC with MHL fix.
Awesome work, bro.
edit: 6.5.2012: Well..MHL works. OC works.
Can you make me look cool so the hot chicks will dig me?
really nice job, zen, keep it up
Outstanding Zen thanks for all the hard work. :thumbup:
Sent from my SAMSUNG-SGH-I997 using xda premium
Thanks Zen for your work :thumbup:
Thx for your work in keeping it going, in the developing for our community.
Fantastical!
Sent from my SAMSUNG-SGH-I997 using xda premium
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
brclho said:
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
Click to expand...
Click to collapse
yup..that's the idea. You get to retain the lastest SU that you have installed.
Thanks all! I'm looking forward to seeing what more can be done with this kernel.
brclho said:
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
Click to expand...
Click to collapse
The packages with the video fix include the same files as with eman. You should only have to flash the kernel+video package in the OP.
Ni e work on kernel :thumbup:
Sent from my SAMSUNG-SGH-I997 using xda premium
Flashed the CWM-Infusion-GB-Z-CoreA2-VideoFix.zip on the ROM Emancipation A:I.
Wiped dalvik and cache.
Rebooted.
Video works great!
Bluetooth turned on, gotta connect to my car tomorrow and test it out.
WiFi connected right away.
Great work guys!!!
CIFS at LAST!!!
A couple quick questions:
I just updated to the Emancipation A1 ROM - please list me the exact steps to install this Kernel. (A bit confused with the revert and video-fix stuff)
bsw11 said:
CIFS at LAST!!!
A couple quick questions:
I just updated to the Emancipation A1 ROM - please list me the exact steps to install this Kernel. (A bit confused with the revert and video-fix stuff)
Click to expand...
Click to collapse
Steps are literally on every help thread.
1. Copy the zip "CWM-Infusion-GB-Z-CoreA2-VideoFix.zip" to internal SD
2. Boot into CWM
3. Select install zip from sd card, and select select the zip you downloaded.
Thank you Zen for your hard work. This is essentially what GPL and git is about. Thank you to everyone else for your patience as well.
My Tab makes calls Yo! GT-P6800
Very awesome... Cant wait to see the upcoming progress with this kernel. Thank you!
Just wanted to point out that on emancipation, my benchmarks skyrocketed using this kernel.
some strange dark magic going on in my phone now...
Related
Version 22 is up
Here are the changes
1. Utilizing TCP congestion Veno in IPv4
2. Added handler for kernel command functionality
3. Added ioctl to set/get clk rate
4. reduce HDCP re-negotiation delay
5. fix hdcp hotplug issue
6. disable windows in dc disable
7. Avoid timer calibration on slave cpu
8. cross check connection state on receiving interrupt
Here is the link
Version A
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver22a.zip
If you like our work, please donate
-----------------------------------------------
Version 21 is up
1. Added "conservative" governor when screen is off for better mp3 playback
2. Enabled JRCU_lazy for less memory barriers in kernel
Here are the link
A version (with voodoo sound module included in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21a.zip
B version (no voodoo sound module included in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21b.zip
LMK how it goes.
BTW, PLEASE donate, donations are greatly appreciated so please do not hesitate Thanks
_______________________________________________________________________
Version 20 is up
20a
1. Voodoo sound included in the kernel
2. Fixed usb lag
3. Disabled JRCU_lazy
Here is the link.
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20a.zip
20b
1. No voodoo sound in the kernel
2. Fixed usb lag
3. Enabled JRCU_lazy
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20b.zip
LMK how it goes.
Please dont hesitate to donate, it is greatly appreciated. Thanks
----------------------------------------------------------------------
Version 19 is up
Here is the link
Version a (voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19a.zip
Version b (no voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19b.zip
Lmk of any reboots. Thanks.
-----------------------------------------------------------------------
Version 18 is up
1. Fixed typo in JRCU implementation
2. Disabled watchdog timer
3. fixed a few unbalanced IRQ for better resume
4. Updated emc clk for multiple dcs
5. usb : ECHI : synchonize shutdown and resume
6. Fixed wrong handling of dc enable
7. Fixed wrong aspect ratio information
8. Add underscan capability exposure via sys
BTW, Big thanks to all who donated and for the hdmi cable that I am able lto test my kernels now with hdmi
Here are the link
18a (with voodoo module in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18a.zip
18b (no voodoo module in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18b.zip
Please donate Thanks
LMK how it goes.
Update: Files were swapped by mistake..it's now fixed
-------------------------------------------------------------------------
Versino 17 is up
1. Implemented clean code of JRCU (Simpler RCU implementation for SMP systems)
2. Forced USB charging
3. Echi, changes
17a
Note: This kernel has voodoo included in the kernel so please delete your voodoo module if you have one.
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17a.zip
17b (no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17b.zip
BTW, if you like our work, please dont hesistate to click on our donations button. Thanks
LMK of any issues. Thanks.
-----------------------------------------------------------------------------------
Versino 16 is up
1. Hdmi, echi and spi changes as per nvidia's
2. i2c recovery implemented instead of simple reset
16a (With voodoo sound built-in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16a.zip
16b (No voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16b.zip
BTW, if you like our work, please don't hesitate to click on donations button It will be greatly appreciated. Thanks.
-------------------------------------------------------------------
Version 15
1. Fixed the "waking up interminently bug"
Please let me know how it goes
15a (HD and Clemsyn Combo)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15a.zip
15b (Revolver and Prime)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15b.zip
PLEASE CLEAR YOUR DALVIK-CACHE AFTER FLASHING THIS KERNEL. THANKS
Please do not forget at your donations are greatly appreciated so don't hesitate to click on our Donate button
-------------------------------------------------------------------------------------------
Version 14 is up
1. Updated hdmi per nvidia's
2. Changed timings in kernel to use Jew's memory timings and lowmemory values (no need for init.d script)
3. Enabled adb debugging as per request
4. Increased 2d/3d timings to 425 (missed to increase it when I changed base)
Here is the link
14a (For HD ROM and Clemsyn Combo)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14a.zip
14b (for Prime and Revolver)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14b.zip
If you like our work, pls click on our donations button...It will be greatly appreciated. Thanks.
---------------------------------------------------------------------------------
Version 13 is up
1. Based on 8.6.6.9 kernel
2. Increased voltage on 1544 frequency
3. Added VR scheduler per mike1986 request
4. No voodoo sound at the moment
WARNING: The voltages are up so please Undervolt according using PimpMyCpu
BTW, please click on our donations button if you like our work. THANKS
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver13b.zip
-------------------------------------------------------------
Version 12 is up with the following changes.
1. Lowered bus speeds in high frequencies to >1000
2. Lowered multiplier to reach the appropriate frequency for the new bus speed
3. Used 1646 instead of 1656 frequency.
With voodoo sound in kernel:
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12a.zip
For prime and revolver (no voodoosound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12b.zip
BTW, dont hesistate to click on our donation link. It will be greatly appreciated. Thanks.
---------------------------------------------------------------------------------
Verson 11 is up with the following changes
1. Included timings by Blades
2. Version a (voodoo in kernel) Version b (no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11a.zip
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11b.zip
** If you like our work, pls click on our Donation link under our sig **
------------------------------------------------------------
Voodoo version 10 is up with the following changes
1. i2c arbitration handling of error changed from simple reset to recovery
2. Increased epp and mpe timings as per Blades
3. Voodoo Sound remove from kernel for better compatibility with ROMS
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver10.zip
LMK how it goes and Please click on donation link if you like our work
** Testing Blades latest OC timings at the moment with voltage increases across the board **
---------------------------------------------------------------------------------
Voodoo version 9 is up...
1. Fix hdmi issues
Please report any waking up issues.. Thanks
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9.zip
** Voodoo sound is built in the kernel so please delete voodoo module for Prime 1.7 and Revolver ****
Version 9b (for Revolver and Prime with no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9b.zip
-------------------------------------------------------------------------
Version 8 kernel is up and only for tegras getting bootloops
PLEASE STAY IN VERSION 7 IF YOU HAVE NO BOOTLOOPS SINCE IT HAS BETTER MEMORY TIMINGS
1. Lessen memory timings for Hynix memory
Version 8a (not for Prime unless you delete the voodoo module)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8a.zip
Version 8b (for prime)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8b.zip
Please let me know how it goes
Donations are greatly appreciated so please do no hesistate
-------------------------------------------------------------------------
Kernel version 7 is up
1. USB and HDMI optimizations per nvidia
Version 7a (not for Prime 1.7 unless you delete the voodoo sound module)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7a.zip
Version 7b for Prime 1.7 (no voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7b.zip
Again, donations are welcome and greatly appreciated
--------------------------------------------------------------------------------------
Kernel for 3.2 Honeycomb version 6 is up
1. Trackpad functional (thanks asus)
2. Less stutter in portrait mode (subjective though, so need your feedback on this)
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver6.zip
Btw, Donations are welcome and greatly appreciated
-------------------------------------------------------------------------
Kernel 3.2 HC ver 5 is up
1. Updated per nvidia and fixed an issue with nvidia's changes not compiling
2. Please see my github for changes
TO BE ABLE TO USE WITH PRIME 1.7 PLEASE DO THE FOLLOWING BEFORE INSTALLING KERNEL
1. Delete voodoo-sound.ko in /system/lib/modules by using file xpert or root explorer
2. Turn off and install kernel
BTW, if you like our work please click on donations button under our sig, it will be greatly appreciated. Thanks.
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver5.zip
--------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------
Kernel 3.2 HC ver 4 is up - Not compatible with Prime 1.7 or Revolver 2.0 (only for Stock Rooted Rom and Clemsyn ROM combo)
1. Reverted Memory speed changes
2. disabled mmap on framework
3. nvmap : fix GART pinlockups
4. nvmap: single page allocation policy corrected
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver4.zip
Kernel 3.2 HC ver 3 is up - not for Prime 1.7 beta or Revolver 2.0 (only for Stock Rooted 3.2 ROM and clemsynROM)
1. EMC changes
2. Memory speed changes
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver3.zip
BTW, donations are greatly appreciated
-----------------------------------------------------------------------------------
Kernel 3.2HC ver 2 is up - not for Prime 1.7 beta (use version 1 for Prime 1.7)
1. Ext4 on system/data/cache data changed to writeback mode
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver2.zip
Semi-Elite version (not tested because wife took my transformer to work, so need feedback on this)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2semi-elitever2.zip
----------------------------------------------------------------------------------------
Kernel for 3.2 HC is up
1. Same OC as version 18
2. Horizotal scrolling smooth even upside down but ufortuately vertical still stutters
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver1.zip
-----------------------------
Version 18
Here are the changes
1. Max overclock set at 1.640 as per blades
2. avp/vde/bsea/bsev/sclk/hclk overclocked to 300
3. Read_ahead set at 1024 in kernel so if you are in stock rom, this will set at 1024.
4. slight changes in interactive governor
5. GPU 3d/2d overclocked at 425
WARNING: Not all transformer can take these timings(only elite tegras) so please backup, flash with caution and make sure you are familiar with nvflash
LINK:
www.tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio-Cpajustes1.6ver18gpu.zip
-------------------------------------------------------------------
BTW, if you like our work, pls click on the donations button under our sig. Thanks
Version 17
1. Tweaked voltages and increased max to 1.646
2. Increased voltages (please undervolt via PimpmyCPU)
3. A few avp changes and usb changes per nvidia
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades1.6version17.zip
If you like our work, pls click on donations button under our signature. THANKS!
**********
Version 16 1.6ghz
**********
1. Minor changes in voltages
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel16.zip
***********************************************
1.7 ghz!!!!!!!! ONLY FOR THE SUPER ELITE TEGRAS
***********************************************
1. Maxed cpu and core voltages as per nvidia's
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.7rel15.zip
Please be advised that this is the max I would go...no more.
BTW, if you like our work, pls click on the donation button. Thanks.
I'll be going on vacation so no updates for awhile
----------------------------------------------------------------------------------------------
Version 15 is up
1. Reverted back to Blades original voltates
2. Increased voltage for 1.6ghz for better stability.
3. Changed clock rate limit for 3d
4. Bootup speed reverted back to 1ghz
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel15.zip
If you like our work, please click on our donate buttons
-------------------------------------------------------------------------
1. NTFS Fully functional !!!!
2. Few changes in kernel
3. Added few erratas for stability
4. PS3 controller functional
5. Undervolting via PimpmyCPU or Setcpu
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel13.zip
Also available now at KERNEL MANAGER
If you like our work, please click the donations button under our username Thanks
-----------------------------------------------------------------------------
Release 12 - built from source with OC code and undervolting and voodoo sound
1. Built from source (Thanks Asus)
2. Undervolting via Pimpmycpu by Cpajuste's code
3. Overclocking via Blades
4. Voodoo sound by Supercurio
5. oVERCLOCKS AUTOMATICALLY TO 1.4GHZ, NO NEED FOR CPUMASTER OR SETCPU
6. NTFS not yet working
LINK
]
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel12.zip
IF you like our work, pls click on our DONATION button under our username. THANKS.
----------------------------------------------------------------------------------
6/22/11 - Version 11b
1. Fixed Elpida memory scaling
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6ver11b.zip
BTW, if you like our work, pls click on DONATE button under username. THANKS
------------------------------------------------------------------------------------------------
6/21/11 - Version 11
1. Increased pinmux driver strength of csus sensors
2. Added few changes via nvidia (see git)
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurioversion11.zip
6/20/11- version 10b
1. Added voodoo changes by supercurio
2. Added init.d support in the kernel (not sure if this will work but any help from ROM devs to test will be appreciated)
3. Latest OC by Blades
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio1.6rel10b.zip
BTW, if you like our work, please help me buy some diapers
----------------------------------------------------------------------------------------------------------------
6/20/11
Version 10 release
1. Same as experimental version B but added Blades' latest OC changes
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6version10release.zip
If you like our work, pls help me buy some diapers (just got the news, wife is pregnant)
------------------------------------------------------------------------------------------
6/18/11
Experimental version 10b...Here are the changes.
1. Reverted memory to 256 (original size) to prevent issues from other apps (I think 512 was a bit of an overkill)
2. Kept increased memory video framebuffers
3. Updated a UART changes in the board.
Here is the link
http://tunerspotter.com/clemsyn/Experimentalversion10b.zip
http://www.megaupload.com/?d=CH5EBQGA
BTW, if you like our work, don't forget our beer
-------------------------------------------------------------------------------------------------------------
6/18/11
Experimental version 10...Here are the changes
1. Enabled NTFS (pls report if it works or not)
2. Increased tegra video memory for better performance (LMK how your experience is)
Here is the link
http://www.megaupload.com/?d=WF1DAKCM
----------------------------------------------------------------------------------
6/18/11 Version 9
1. Disabled Jazelle Erratta and Thumb EE instructions
2. Enable PL310 errata, 752520 errata and 751472 errata
Here is the link
http://www.megaupload.com/?d=M1H9IZEM
IF you like our work, pls buy us a beer
--------------------------------------------------------------------------------------
6/17/11 Version 8b
Changes:
1. Pinmux changes
2. Updated BT drivers for kernel (hopefully fixes playstation controllers but I dont have any BT device at the moment)
3. 3d/2d GPU overclocked at 350000 to help with artifacts on elite version (had 400000 for 3d and 350000 for 2d)
Here is the link
http://www.megaupload.com/?d=QPRBIEA8
6/16/11 Version 8a Elite
1. fix on backlight (pls let me know how it works for you)
http://www.megaupload.com/?d=1VKHDT0C
6/15/2001 -- INTRODUCING MY VERSION 8 ELITE
Changes are as follows:
1. Tweaked memory settings and video drivers to FIX BROWSER CRASH - finally
2. Added bsea clk rate to the kernel
Here is the link
http://www.megaupload.com/?d=WE5GC5HC
IF you like our work, pls buy us a beer (still waiting my first beer)
--------------------------------------------------------------------------------------------------
6/14/2011
Version 7a ELITE
1. enabled config erratas for cortex 9 cpus
2. enabled nvmap carveout killer to help with browser crashing (still dont solve it though).
3. crypto AES updated to support dual cores
Here is the link.
http://www.megaupload.com/?d=SP6U6XAU
UPDATE: FOR BROWSER CRASH SET ENABLE PLUG-INS to ON DEMAND (browser setting--Advance)
6/13/11 Version 7 Released
Changes:
1. Moved ALSA to spdif (hopefully will fix audio in hdmi)
2. Added DSI support in video drivers
3. few optimizations in cache handling of memory added
Here is the link
http://www.megaupload.com/?d=PQV15NWC
6/13/11
Elite version of Ver 6 with a few changes:
1. Used 4.4.3 compiler
2. Updated serial drivers
3. Updated video drivers in the kernel
Here is the link
http://www.megaupload.com/?d=SEL0MQ3L
6/12/11
Updated version 6 with Accelorometer fix and overlay fixes in video drives
Here is the link
http://www.megaupload.com/?d=QZCNRAWO
--------------------------------------------------------------------------------------
6/12/11
Version 6 is updated with following changes
1. Fixed camera issues
2. Added a few fixes in dma and gpios
3. reverted DAS driver back to original
4. fixed a few video drivers
Here is the link
http://www.megaupload.com/?d=8IQZQSLV
Original kernel Asus kernel
http://www.megaupload.com/?d=GSIHUPJ6
BTW, If you like our work, pls buy us a beer
--------------------------------------------------------------------------------
6/10/11
UPDATE
Release 5a: Here is the link
http://www.megaupload.com/?d=GLDLWF2N
Changes:
1. SMP fixes
Update 6/8/11 --- RELEASE 5 ---------------------
New changes to kernel:
1. CPU OC'd still at 1.6ghz
2. 3dGPU, 2d GPU, vde kept at stock
3. Upgraded Audio driver to DAS
4. GPIO fixes in kernel included
Please let me know if it fixes audio issues. Thanks.
http://www.megaupload.com/?d=LHGNQXTO
BTW, if you like our work, please buy us a beer
-----------------------------------------------------
Update 6/6/11 release 4
Elite tegra version since not all tegra can run this kernel. The reasons are as follows:
CPU OC'd at 1600 (1000 default)
3d GPU OC'd at 400000 (300000 default)
2d GPU OC'd at 375000 (300000 default)
VDE OC'd at 300000 (250000 default)
Again, only for the elite tegras out there. Here is the link
http://www.megaupload.com/?d=JMVUMP0A
Please create a backup, then install kernel, then clear Dalvik-cache, the Wipe Cache partition. Goodluck.
BTW, if you like our work, please buy us a beer or two
Will create a normal version soon. Also this kernel is updated to nvidia 10.11.6 standards (except for wifi and usb at the moment)
Update 6/5/11 Release 3
http://www.megaupload.com/?d=2ZJI1J2H
Reverted to 4.4.0, CIFS built-in the kernel, updated to 1.5 ghz for better stability (I think)
Update 6/5/11 Initial Release 2
Fixed Camera/Sound/Flash etc, next up would be voltages for OC. Used 4.4.3 toolchain for better compatibility.
Source is up on my github (I apologize, its kinda messy but needed to release our kernel)
Here is the link
http://www.megaupload.com/?d=MNJF34WJ
BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)
And if you like my work, please buy me a beer Also you input is greatly appreciated
GITHUB
https://github.com/clemsyn/LatestAsusOC
Sweet. Downloading! I'll try it after I finish watching movie!
Sent from my Rooted Transformer running Primordial v3.1
GibMcFragger said:
Sweet. Downloading! I'll try it after I finish watching movie!
Sent from my Rooted Transformer running Primordial v3.1
Click to expand...
Click to collapse
Ooopps, just found out, no audio. Will fix this tomorrow but you can test it out.
Downloaded but the file has no extension.
Should I rename it to a zip file?
Then of course flash through cwm?
Sent from my Transformer TF101 using XDA Premium App
Mean Sixteen said:
Downloaded but the file has no extension.
Should I rename it to a zip file?
Then of course flash through cwm?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Must have uploaded the wrong file...Sorry, will upload again. But yes, you can just add .zip and that should be fine.
working fine for fine. OC all the way to 1.6. No problem with audio too (Equal sound on both speakers). wonder if its a placebo effect but speakers sounds slightly louder. Great work.
Edit: Yes, camera is broken, but no big issue. awaiting your fix.
clemsyn said:
Must have uploaded the wrong file...Sorry, will upload again. But yes, you can just add .zip and that should be fine.
Click to expand...
Click to collapse
Thanks for the quick reply. I will give it a go.
I can always reflash the stock kernel.
Sent from my Transformer TF101 using XDA Premium App
OnceHeaven said:
working fine for fine. OC all the way to 1.6. No problem with audio too (Equal sound on both speakers). wonder if its a placebo effect but speakers sounds slightly louder. Great work.
Click to expand...
Click to collapse
hmm..I'll try to format everything out. I might get my audio working, how about your camera? Is it working? LMK.
Ok, got my audio working, thanks...saved me some time...really have to go now, Goodnight to everyone.
Nope, camera is definitely broken. FC immediately. But no big issue cause I prefer to have a quick multi function device den to have a slow laggy device just for photo taking purposes.
clemsyn said:
hmm..I'll try to format everything out. I might get my audio working, how about your camera? Is it working? LMK.
Click to expand...
Click to collapse
So here's my initial observations.
Set CPU works.
quadrant doesn't. Says internal error or something
I can't go past 1400. Bummer. (Interactive governor)
Seems zippier.
As mentioned camera doesn't work.
Can't think of anything else.
Edit: forgot. The popping sound people have talked about. I have only heard this on a rare occasion but now I hear it frequently. For example till now I only remember hearing it when first typing something. Now I even hear it opening programs. In fact opening my gallery I heard it 3 times in just a few seconds.
Edit 2: YouTube broken also. Tries to buffer then the popping sound. Then tries too buffer...popping...repeat until it fails.
Definitely much snappier though.
Hope this helps!
Look forward to more. NICE WORK!!!
Sent from my Transformer TF101 using XDA Premium App
oh! try it right now!
edit: 1.6G is not stable for me. got a reboot when i am opening wifi
edit: 1.5G no luck either
Video playback terrible 720p and no sound on video
Sent from my Transformer TF101 using Tapatalk
Also confirming YouTube problem
Sent from my Transformer TF101 using Tapatalk
Clemsyn, nice to see you there. So you trade your Gtablet for Transformer
Sent from my Transformer TF101 using Tapatalk
dirwdirw said:
oh! try it right now!
edit: 1.6G is not stable for me. got a reboot when i am opening wifi
edit: 1.5G no luck either
Click to expand...
Click to collapse
Try 1.4..I got mine stable at that speed.
lithiasalesjs said:
Video playback terrible 720p and no sound on video
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Will check this out...Thanks.
ivan.volosyuk said:
Clemsyn, nice to see you there. So you trade your Gtablet for Transformer
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Still have my Gtab that I just bought recently...been trying to get 2.6.36 kernel to boot on that thing but I'm kinda careful because of the bad blocks I made so far. Anyways, got this Transformer and decided to make a few tweaks to get 3.1 OC kernel to boot. As you can see still has some issues Hope asus releases their source ASAP though..
clemsyn said:
Try 1.4..I got mine stable at that speed.
Click to expand...
Click to collapse
1.4G is rock stable as netarchy's kernel
clemsyn said:
Introducing the first overclock kernel for 3.1 (Hate to wait for Asus to release their source so might as well make it ) plus hate to just let Xoom have all the fun. I used Blades OC source and his advice (darn that guy is good, hope his family member gets better soon). This is my first release for Asus Transformer (thanks to wifey for giving me one). Anyways, I used an old compiler so there might be issues. Please let me know. Have to let the kids go to sleep now. Goodnight!
New Link
http://www.megaupload.com/?d=YWUIE8XU
BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)
Update: Just found camera is broken, might need to use the latest compiler for this
And if you like my work, please buy me a beer
Click to expand...
Click to collapse
Woww..this is very good work. dnload it now....
opps, the link is hv a problem.
It say "The file you are trying to access is temporarily unavailable. Please try again later."
update: it's downloading now...
Clemsyn, you are a legend, dude. Your work on the GTab changed the course of that device forever. So stoked to have you on the Transformer...this is going to be amazing. Can't wait to see this thing stabilized. There is definitely a beer in your future!
Sent from my Transformer TF101 using XDA Premium App
HEY GUYS, SINCE WE ARE NOW A TEAM
ALL FUTURE DEVELOPMENT WILL CONTINUE ON THE FOLLOWING THREAD
I HAD GREAT FUN DEVELOPING FOR YOU ALL GUYS.
HOPE WE AS A TEAM CAN DEVELOP EVEN BETTER.
http://forum.xda-developers.com/showthread.php?t=1252698
Changelog
Kernel Changelog:
v1.8 [30/08/2011]
Reworked Battery Driver
Reworked CWM Recovery
Now 11 ROM's support in Multiboot
v1.7 [15/08/2011]
Multi Boot
Power off Option in CWM
Dynamic OC (ability to change the maximum freq)
Modify the max_blk_count value to prevent overflow.(sdcard related)
mmc: core: Fix dereferencing after NULL check (sdcard related)
Lower vfs_cache_pressure 100->25.
ARM: fix some sparse errors in generic ARM code
lib: Improve the performance of memcpy and memmove of the general version
lib: Introduce some memory copy macros and functions
ashmem: fix deadlock when system is low on memory
v1.6 [11/08/2011]
Batter Driver Back to Original - Only Change is added Compensation for Data On
Stable OC
UV Works for All Frequencies - Can be checked via dmesg
Removed SavagedZen and SmartAss for now.Giving Problems. Will come back in future versions.
SDCard Partitioning Problem Solved - Ext3 partitioning for mmcblk0p2 - Can be converted to Ext4 Using g3mod app.
Kernel Flashing via CWM Recovery Working
Kernel Hz: Lite:256 Performance:300 Ultimate:500 Extreme: 1000
Noop I/O Scheduler by default
Fixed Typo in Bootlogo
v1.5 [05/08/2011]
CompCache
BootLogo
TinyRCU
Battery Driver Reworked - Please test and give feedback
v1.4 - 31/7/2011
CWM Recovery In Kernel
Fixed CPU Freq Driver. SetCPU now shows properly.
UV working properly now.Can Be Checked in dmesg.
A 1300MHz freq Step in Extreme Version for those who want 1300MHz overclocking.
Changed Kernel Hz to 300 for Better Battery Backup.
v1.3.4 - 27/7/2011
Overclocking Stable (Less freezes) - To Test
BFQ I/O Scheduler - http://algo.ing.unimo.it/people/paolo/disk_sched/
Extreme Version Screen Off Bug Solved
No OC bus for any versions - (For those who want OC Bus, please use v1.3.0 for the moment. I will try to make OC bus in some better manner)
v1.3.3 - 25/7/2011
5 Touch Mod
Removed RAM Optimization Script
Overclocking Stable (Less freezes) - To Test
Solved Bug which showed wrong freq in SetCPU and PimpMyCPU
Solved Time In State for SetCPU
Extreme Version has OC Bus 200MHz
Downloads
Kernel Downloads:
http://code.google.com/p/g3mod/downloads/list
Steps To Install
Steps To Install Kernel:
1. Download the kernel.
2. Flash using Odin via One-Package
3. Install g3mod app by dympy
Donations
Donations:
Thank You Frank Becker for the donation.
Thank You fuxmen for the donation.
Thank You marcellusbe for the donation.
Thank You kyrillos13 for the donation.
Thank You lovemx93 for the donation(Website - www.g3mod.com).
Thank You Marcin Czado for the donation.
Thank You Sascha Bauer for the donation.
Thank You Orilin(Giuseppe Russo) for the donation.
Thank You Benjamin Lebsanft for the donation.
Thank You Darshak Shah(cool.darshak) for the donation.
Thank You Wim Bogaert(Abelsama) for the donation.
Thank You Harigovind Kaninghat (harkan89) for the donation.
Steps for Different Features
Steps for Multi boot:
1) Flash Kernel v1.7+
2) Go to CWM Recovery -> Multiboot -> Backup ROM.
3) Backup your Current ROM to ROM1 (It will backup the system.img at /sdcard/Android/data/g3mod/romname_ROM )
4) Add the system.img of your 2nd ROM to /sdcard/Android/data/g3mod/romname_ROM and similarly for different ROM's.
5) Use the CWM Recovery -> Multiboot -> Switch ROM option to switch between different ROM's.
Note: Ask the developer of the ROM's to provide you with the system.img for their ROM
System Img's:
G3MOD ROM
Grigora ROM
Kyrillos' ROM
Stylooo AOSP Style
DutchMods ROM
XXJPS Stock Deodexed Rooted System.img.rar
Steps for Changing the Max Freq(Dynamic OC):
There is an entry in /sys/devices/system/cpu/cpu0/cpufreq/plls_table where you can put your own value for APLL.
Before doing this, set "PERFORMANCE" governor on and min and max frequencies to the maximum.
Code:
// Do this in adb
echo "0 a[SIZE="5"][B][U]258[/U][/B][/SIZE]0[SIZE="5"][B][U]3[/U][/B][/SIZE]01 a14d0303 c07e13fc cf850240" > /sys/devices/system/cpu/cpu0/cpufreq/plls_table
You need to replace the 258(Hex Value) with your desired value.
Here 258 means
(2*16*16) + (5*16) + 8 = 600
and 3 means it is 600*2 = 1200
Therefore, a2580301 means 1200MHz.
This is a temporary method. For a permanent Method, add this line to a init.d script. Name the script to something like S10_Dyanmic_OC.
Help Others: If you calculate a Hex Value for a particular frequencies add it here:
https://docs.google.com/spreadsheet/viewform?formkey=dG5hdnpsWFdTNExiY2t3dy16VzBvaWc6MQ
You can view all the frequency Hex value's calculated by others over here:
https://docs.google.com/spreadsheet...G5hdnpsWFdTNExiY2t3dy16VzBvaWc&hl=en_US#gid=0
Check This Out
Kernel Related Media:
5 Touch Support:
BootLogo and Progess Bar
Multi Boot
Old Kernels
g3mod_v1.3.4_LITE.tar (5.9 MB)
http://www.multiupload.com/3BIF9S2IES
g3mod_v1.3.4_LITE.zip (6.1 MB)
http://www.multiupload.com/9IJTKFIJDX
g3mod_v1.3.3_LITE.tar (5.9 MB)
http://www.multiupload.com/DDMMU0U9YB
g3mod_v1.3.3_LITE.zip (6 MB)
http://www.multiupload.com/DW1QZPDQOY
g3mod_v1.3.4_PERFORMANCE.tar (5.9 MB)
http://www.multiupload.com/H53ZTO5ULW
g3mod_v1.3.4_PERFORMANCE.zip (6.1 MB)
http://www.multiupload.com/WWFL3EXH0Y
g3mod_v1.3.3_PERFORMANCE.tar (5.9 MB)
http://www.multiupload.com/Y9CDMFVH61
g3mod_v1.3.3_PERFORMANCE.zip (6 MB)
http://www.multiupload.com/0MQQRR1KV8
g3mod_v1.3.4_ULITMATE.zip (6.1 MB)
http://www.multiupload.com/I4JCH7E5JE
g3mod_v1.3.4_ULTIMATE.tar (5.9 MB)
http://www.multiupload.com/TEQXRZMKPQ
g3mod_v1.3.3_ULITMATE.zip (6 MB)
http://www.multiupload.com/97DV0V4OQC
g3mod_v1.3.3_ULTIMATE.tar (5.9 MB)
http://www.multiupload.com/KV9SSVWWZ7
g3mod_v1.3.4_EXTREME.tar (5.9 MB)
http://www.multiupload.com/EGZKK89JTZ
g3mod_v1.3.2_LITE Odin
g3mod_v1.3.2_LITE CWM
g3mod_v1.3.1_LITE Odin
g3mod_v1.3.1_LITE CWM
g3mod_v1.3.0_LITE Odin
g3mod_v1.3.0_LITE CWM
g3mod_v1.3.2_PERFORMANCE Odin
g3mod_v1.3.2_PERFORMANCE CWM
g3mod_v1.3.1_PERFORMANCE Odin
g3mod_v1.3.1_PERFORMANCE CWM
g3mod_v1.3.0_PERFORMANCE Odin
g3mod_v1.3.0_PERFORMANCE CWM
g3mod_v1.3.2_ULTIMATE Odin
g3mod_v1.3.2_ULTIMATE.zip CWM
g3mod_v1.3.1_ULTIMATE Odin
g3mod_v1.3.1_ULTIMATE CWM
g3mod_v1.3.0_ULTIMATE Odin
g3mod_v1.3.0_ULTIMATE.zip CWM
g3mod_v1.3.2_EXTREME Odin
g3mod_v1.3.2_EXTREME CWM
g3mod_v1.3.1_EXTREME Odin
g3mod_v1.3.1_EXTREME CWM
g3mod_v1.3.0_EXTREME Odin
g3mod_v1.3.0_EXTREME CWM
G3Mod_v1.2.7_LITE
G3Mod_v1.2.7_PERFORMANCE
G3Mod_v1.2.7_ULTIMATE
Init.d Working
Undervolt Working
Lite: Non-OC 667MHz Max
Performance: OC Clock-1330MHz Max Bus-190MHz
Ultimate: OC Clock-1372MHz Max Bus-196MHz
G3Mod_v1.2.3
G3Mod_v1.2.3-Increased Voltage
Bus Overclocked - 200MHz
Overclocking Enabled
Max: 1400MHz
Min: 100MHz
Steps:100,200,300,400,500,600,700,800,900,1000,1100,1200,1300,1400
G3Mod_v1.2.2
Bus Overclocked - 200MHz
Overclocking Enabled
Max: 1000MHz
Min: 100MHz
Steps:100,200,300,400,500,600,700,800,900,1000
G3Mod_v1.2.1
OverClocking Upto 800MHz
G3Mod_v1.1.1
FileSytem Support: rfs,ext2,ext3,ext4(tested working)
Init.d Scripts
Data2SD
No need to convert filesystems to rfs before flashing
G3Mod_v1.0.3
Fixed Sound Click Bug
Updated the battery driver
G3Mod_v1.0.2
adb root and busybox 1.19 Added
G3Mod_v1.0.1
1% Battery Support Added
Convert filesystems to rfs before flashing kernel.
G3Mod_v1.1.0
1% Battery Mod
Root ADB
own busybox 1.19
Fixed Sound Click Bug
Convert filesystems to rfs before flashing kernel.[/QUOTE]
G3Mod_v1.0.0
Stock Froyo Kernel
Source For Developers:
https://github.com/dharamg3
Note:
I am learning how to develop kernels.
I'll add different features as and when i can implement them.
The main goal of this kernel will be to keep the phone stable and fast.
There will be nothing as alpha or beta releases.
I'll give out the kernels directly, but if anything goes wrong and you have to reflash the ROM or kernel, please dont start shouting.
You may give me different ideas on what features to implement. I'll try my best to implement all the features you want
Many of the features implemented in this kernel, are taken from marcellusbe's Fugumod Kernel, and I shall be ever thankful to marcellusbe for the fugumod kernel
Warning:
I am not responsible for any damage caused to your phone (softbrick or hardbrick)
Credits
Credits:
marcellusbe for all his help, awesome fugumod kernel
supercurio for voodoo v10
Paolo for BFQ I/O Scheduler
Stylooo for the different version's banner
All developers for making this an awesome phone
Everyone who is helping is solving different issues with this kernel
Please let me know if i am missing anyone
benzyniarz1 said:
From polish android.com.pl forum:
JaCoL source
It does mean that user has strange problems, for example some problems with Android Market (not specified) and problems with logging in facebook (he can't just do it).
Click to expand...
Click to collapse
Ok...I'll check that...
Anyone else facing this problem??
dharamg3 said:
Ok...I'll check that...
Anyone else facing this problem??
Click to expand...
Click to collapse
adb root and busybox done!!!
Next in line is Filesystem Support
rudolf895 said:
@dharamg3
Would there be a how to/guide on how you did this?
Compiling kernel,modding..etc.?
Click to expand...
Click to collapse
I can do that but the problem is that kernel compiling is easy but modding is difficult.
Even if i post it, there will be a lot of users who dont know stuff, and start complaining about why this is not happening and stuff...
So i would prefer to help but personally not directly on the forums..
So anyone who would like to learn, PM me and i'll guide you as i can
deskjeti said:
It would be great if you could get the permission of marcellusbe to modify the 2.2BE fugumod with 1% battery mod
Click to expand...
Click to collapse
For that i will require marcellusbe's 2.2 source...maybe you should wait for 2.4 bleeding edge...
dharamg3 said:
For that i will require marcellusbe's 2.2 source...maybe you should wait for 2.4 bleeding edge...
Click to expand...
Click to collapse
Guys, Link for G3Mod v1.0.2 is added.
Nice! You're a quick learner!
rudolf895 said:
ok then..
PM it is
Once i know where n how to start i'll mod myself..
Click to expand...
Click to collapse
Its not similar to rom build (framework here, apps in this folder....) its n times harder
Sent from my GT-I5800 using Tapatalk
peldax said:
Its not similar to rom build (framework here, apps in this folder....) its n times harder
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
who said its easy!
Would you give up when things get hard?
I'd learn n share knowledge..
FYI dharamg3 is already helping me via PM..
I didnt give it up! I am working on my own kernel now
Sent from my GT-I5800 using Tapatalk
chill anyway i see that first everybody was making custom ROMs but now everybody is making kernels idk if i should even make one when there will be so many kernels i quess when everybody are tired of making kernels then everybody will start develope apps, evolution but this was a bit off-topic
Samsung SPH-D700 (Epic 4G) kernel by nubecoder
http://www.nubecoder.com/
nubernel-2.6.35_v0.0.2
Project info:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
Check the feature list to see an overview of features.
Check the change log to see a detailed history log.
Download info:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
Download links.
Source info:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
Full source available at GitHub.
Just a note to everyone:
I'm in the process of purchasing / building a new development box.
Any and all donations will be used to assist with the cost.
Thank you.
=]
Known issues:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
The smartass governor needs some tweaking.
Strange readouts in SetCPU (read below for details).
Video recording seems to be broken; Still need to verify if EI22 100% stock has the problem.
Feature list:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
nubernel-2.6.35_v0.0.2
Includes a custom "Nubernel the kernel" bootlogo.
Includes kexec support.
Ensures su is installed properly. (tw build only!)
Ensures superuser is installed properly. (tw build only!)
Ensures busybox is installed properly. (tw build only!)
Installs bash into /system/bin/ (if it is not found). (tw build only!)
Installs bash resources if they do not already exist. (tw build only!)
Includes flash tools (redbend_ua and bmlwrite) in /sbin. (tw build only!)
Includes custom scripts in /vendor/bin. (tw build only!)
Recovery redirector, "reboot recovery" will boot to the recovery kernel (bml8).
Supports the following:
init.d scripts, init.local.rc, RFS, EXT4, CIFS, TUN, Netfilter TCPMSS (init.d scripts = tw build only).
Fully supports VoltageControl and SetCPU (see SetCPU notes below).
SetCPU notes:
SetCPU aparently uses "cpuinfo_cur_freq" rather than "scaling_cur_freq" for it's live readout.
For some reason, "cpuinfo_cur_freq" reports being at some strange frequencies (75MHz, 150MHz, 300MHz).
I have no idea why this is happening, or how to fix it as of now, sorry.
Includes the following I/O schedulers:
noop, deadline, cfq, bfq, sio.Uses deadline as the default I/O scheduler.
Includes the following CPU frequencies:
100MHz, 200MHz, 400MHz, 600MHz, 800MHz, 900MHz, 1000MHz, 1100MHz, 1200MHz, 1300MHz, 1400MHz.The following CPU frequencies are disabled by default (use an app to enable them):
1200MHz, 1300MHz, 1400MHz.
Includes the following CPU governors (see notes below):
smartassV2, smartass, interactiveX, interactive, conservative, userspace, powersave, ondemand, performance.Uses ondemand as the default CPU governor.
CPU governor notes:
There seems to be a scaling problem with smartass (not V2).
It likes to hang out at 900MHz, I'll try to fix it later.Loads the Android logger as a module. (tw build only!)
Supports the following types of bootanimations (See notes):
bootanimation (bootanimation.zip).
samsungani (*.qmg). (tw build only!)
Bootanimation notes:
bootanimation.zip:
If you have both bootanimation.zip and boot*.qmg files, they will fight each other.
It's better than froyo was, in that, it will kind of randomly choose one or the other.
It's best to just remove the boot*.qmg files if using a bootanimation.zip animation. Samsung boot*.qmg boot animations: (tw build only!)
You must still fake out the kernel with a "blank" bootanimation.zip.
You still might see a small glimpse of the framework's animation (blue android logo).
Includes system app mover and remover: (tw build only!)
During boot, the init scripts make room to install root and recovery. (tw build only!)
Apps that are moved will have their data removed (to prevent FC's).
Two list files are checked to determine what will be moved or removed:
/data/local/.mv_sys_apps
/data/local/.rm_sys_apps The format of the list files is as follows:
Each line must contain two strings separated by a space:
#1 - The system app's apk file name with no extension.
#2 - The system app's packagename. Example:
FreeHDGameDemos com.gameloft.microwidget If the list files do not exist, defaults will be created.
Apps that will be moved from /system/app to /data/app by default:
Asphalt5_DEMO_SAMSUNG_D700_Sprint_ML_330 (Asphalt 5 Demo)
FreeHDGameDemos (Promo Widget)
nascar09-prod-release (Sprint Nascar)
qik-8.66-release-ffc (Qik video)
sfl-prod-release (Sprint NFL)
SprintTV
SprintTVWidget
SprintZone
TN6.2-sprint-handset-6201501 (Telenav Navigation) Apps that will be removed by default:
Term1
Term2
Term3
Term4
Term5
Includes patches and code, etc from the following people:
Voodoo Sound - supercurio
Kernel bootlogo creation binary - morfic.
Keyboard patches, TARGET_PRODUCT fix, MODULE_LOOSE_VERMAGIC fix, kexec patch, etc - mkasick.
Various patches, scripting, etc - tanimn.
Various patches, scripting, etc - Tortel.
ClockworkMod recovery - koush.
ClockworkMod recovery (device specific), initramfs, scripting, etc - DRockstar.
Compiler tweaks, compiler warnings, etc - gzub.
Various patches, scripting, initial help getting my kernel compiled, etc - RandyT / Bonsai.
scaling_available_frequencies sysfs, compile errors, scripting, etc - nullghost.
Boot from sdcard (Dual Boot), Re-enabled kernel splash (bootlogo), various patches - Rodderik.
Various patches / code, scripting, cyanogenmod, etc:
chris41g / Decad3nce / DevinXtreme / DRockstar / jt1134
noobnl / nullghost / Rodderik / UberPinguin / wispoffates Miscellaneous somethings - Anyone I may have missed.
I forgot to add this to the repo before finalizing the release, but I can still add it here:
A whole lot of the recent changes came from netarchy, Thanks netarchy!
Thanks to all the above!
Download links:
=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]=]
nubernel-2.6.35_v0.0.2 for touchwiz:
ClockworkMod recovery flash-able zip
Heimdall package
Odin flash-able tar.md5
(If Odin gives you trouble and the md5 values match, remove the md5 extension and try again.)
nubernel-2.6.35_v0.0.2 for cm7 / miui:
ClockworkMod recovery flash-able zip
Heimdall package
Odin flash-able tar.md5
(If Odin gives you trouble and the md5 values match, remove the md5 extension and try again.)
md5sums for all files.
A temporary build (for TW roms) including the fix for video recording can be found in this post.
(Released early so you can record videos of your families over the holiday.)
=]
Nothing really special at the moment (other than the bootlogo).
I'll begin adding OC/UV and governors when I get some time.
[edit]
Oh, and I'll see about getting a CM7 compatible build going also.
[/edit]
Enjoy.
=]
well this is awesome, installing now...
EDIT: errors out via CWM install...
1. Flash rom
2. Reboot
3. Flash kernel
Sent from my SPH-D700 using XDA App
Thanks for this bro! Currently running cm7 so won't be giving this a try yet, but I can't wait for an aosp version!
Sent from my SPH-D700 using XDA Premium App
Downloading now
Thanks Nubecoder!
Sent from my SPH-D700 using xda premium
does this show up in spare parts? or will it still be blank like the other GB kernals?
Excellent work, thanks man!
Sent from my SPH-D700 using xda premium
Definitely will be trying this out whenever I get back to my dorm room! Thanks a lot bro
How is the reboot issues with this kernel?
Sent from my SPH-D700 using Tapatalk
omair2005 said:
How is the reboot issues with this kernel?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
It is built from source, so the reboot is fixed!
I'm currently running TW4 ROM on EH17. Does this work well?
Prince_Basil said:
I'm currently running TW4 ROM on EH17. Does this work well?
Click to expand...
Click to collapse
How's that ROM working for you? I made that, but have never used it. Is there anything I should add?
xboxfanj said:
How's that ROM working for you? I made that, but have never used it. Is there anything I should add?
Click to expand...
Click to collapse
I like it a lot so far. I think that's the ROM I'm running. Sorry, it downloaded with a name with a bunch of letters. But I have TW4 Launcher, so I assumed. The only thing that I wish it had was the lockscreen/status bar mod & CRT/Over scroll. But not the yellow overscroll. The like cyan blue or whatever. It would match better with TW. But otherwise, its good. I like it. Thanks so much!!
marcusant.... can you put this in your ROM? just curious, excellent kernel, excellent ROM, seems like a good match
Sent from my SPH-D700 using XDA App
troyolson92 said:
marcusant.... can you put this in your ROM? just curious, excellent kernel, excellent ROM, seems like a good match
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I was thinking the same thing. I'll be trying it out on top of ACS ICS v6 when I get home.
Is this based off official source?
---------- Post added at 06:44 PM ---------- Previous post was at 06:43 PM ----------
marcusant said:
It is built from source, so the reboot is fixed!
Click to expand...
Click to collapse
Answered the question I had.
This works awesome with ICS v6. Fixed all my weird issues (especially with Opera Browser). The only problem is that it won't load the custom bootanimation.zip. I just get a blank screen.
Sent from my Samsung Epic 4G
[kernel][3.0.46][ics] •∞ CYMBALINE •∞ RD04 •∞ 2.8 •∞ [16-OCT-2012]
PLEASE READ THE ENTIRE POST #1 and POST #2, UNDERSTAND, READ IT AGAIN, BEFORE YOU DECIDE TO FLASH.
* THIS KERNEL IS ONLY FOR ICS (Android 4.0.x) TouchWiz (Samsung/ATT ICS releases, i.e any UCLF6, UCLF5, UXLF3, UCLD2, UCALC2) ROMS. It is NOT for after market ROMS like CyanogenMod or AOKP.
* The ONLY device that it has been tested is ATT SGH-I727 and Rogers SGH-I727R.
* CYMBALINE 2.X is a complete overhaul from 1.X series, if you have been using 1.X series, I would strongly recommend to upgrade to 2.X series.
Click to expand...
Click to collapse
DISCLAIMER
Click to expand...
Click to collapse
KERNEL FLASHING, OVERCLOCKING, UNDERVOLTING, ETC CAN POTENTIALLY DAMAGE YOUR PHONE. YOU ARE SOLELY RESPONSIBLE FOR FLASHING THIS KERNEL.
TUNING SCRIPTS
Click to expand...
Click to collapse
For Gov/OC/UV/UC tuning scripts for various governors. If you don't like to use an app (as lot of them cannot do fine grained tuning) you would like to use init scripts, then please see @ReedX50v scripts in this thread. The only requirement is "busybox run-parts init.d supports", most custom ROM's with modified Ramdisk kernel image should have that built-in. If it not, then bang your ROM author to provide one.
* For Cymbaline 2.6 and above (any ramdisk version, i.e. any of the RDNN) use the information in following post #574. You might also read the post #249, for some background information. Please thanks ReedX50v.
* For Cymbaline 2.5 and BELOW (any ramdisk version). use the scripts (again thank Reed50Xv). Use the scripts from the following post #249.
FEATURES/CHANGELOG
Click to expand...
Click to collapse
You can use 3rd Party APPS for CPU and Voltage Control. For Voltage, it is using the Faux VDD tables, so the app MUST be able to understand that. (See ADDONS section below).
[RD04][2.8]
updated to linux 3.0.46 upstream.
Experimental, ported CM10 bln with blink support (updates your lights lib in ROM). Not sure how great this is but feedback is appreciated.
WiFi sensitivity restored to stock.
[RD04][2.7]
updated to linux 3.0.42 upstream.
Ramdisk updated to support boot sounds. (remove /system/etc/PowerOn.ogg if you don't want it)
merged to latest (09/09/2012) CAF relevant changes.
[RD03][2.6]
Changed Ramdisk (def. governor changed from "ondemand_sammy" to "ondemand".
updated to linux 3.0.40 upstream.
updated WiFi stack to 1.15.55
Skipped internal releases 2.4 and 2.5.
FIX: Now overclock should be fully supported.
[RD02][2.3] Minor release, only one version now. Hacked to ensure that the max. boot ramp up is only 1.566GHz. If your phone can't handle that, sorry return it .
Added two more governors as modules : "savagedzen" and "hotplug"
Unified release, hack in place to not ramp up to the MAX allowed i.e. (1.836Ghz) so all phones should boot, as the boot max is set to 1.566GHz.
merged some bt code from Cymbaline 1.5 branch.
[RD02-2.2] Please note RAMDISK change, see below
Samsung ondemand governor moved as "ondemand_sammy", did this so that I can merge the standard ondemand and mods w/o creating a merge headache. Due, to this, the SAMMY settings in the RAMDISK modified to reflect the new name.
using linux ondemand with faux mods. (thanks faux123)
added faux's intellidemand as a built-in gov, since I like it (thanks faux123).
reverted the wi-fi optimization, which was causing tethering issues. (hopefully this is fixed)
pre-emptive strike: merged all Govs from 1.5. Please don't complain that I am missing one. As usual all these are in /system/lib/modules. so you would need to "insmod" (see ReedX50v scripts for samples). Here is the remaining ones (please see RD01-2.1 ChangeLog for others)
Code:
/system/lib/modules/cpufreq_brazilianwax.ko
/system/lib/modules/cpufreq_lionheart.ko
/system/lib/modules/cpufreq_lulzactive.ko
/system/lib/modules/cpufreq_ondemandx.ko
/system/lib/modules/cpufreq_wheatley.ko
[RD01-2.1]
BLN Fix: reverted 2.0 changes, should work now
Providing two CWM flashable zips. One OC to 1.8366GHz and another with OC Capped at 1.566GHz.
Upped the voltage to 1350mV as per ReedX50v testing results and recommendation (hit his thanks button).
IMPORTANT: ALL CUSTOM GOVERNORS are compiled a Kernel Modules. Please use init script to enable the ones you want. I have done this so as to eliminate any interference from them.
This version has the following Governors: (Please see Post #420)
Code:
/system/lib/modules/cpufreq_adaptive.ko
/system/lib/modules/cpufreq_badass.ko
/system/lib/modules/cpufreq_lagfree.ko
/system/lib/modules/cpufreq_lazy.ko
/system/lib/modules/cpufreq_pegasusq.ko
/system/lib/modules/cpufreq_smartass2.ko
[RD01-2.0] Major version change. REMOVED SOME GOVERNORS, please restore to stock ondemand before flashing (i.e. disable init scripts or apply on boot settings in whatever app you are using).
Updated to upstream Kernel 3.0.38
Bunch of NetFilter kernel modules in /system/lib/modules for the interested users.
I have removed some governors, please reset to default governor "ondemand", before flashing.
cherry-picked key changes from CAF.
GPU OC (NOTE: please use sysfs interface to change the frequency the default is stock values, see post #2)
3D Mode: 320000000, 300000000, 266667000, 228571000, 200000000, 177778000, 27000000
2D Mode: 266667000, 228571000, 200000000, 160000000, 96000000, 27000000
Cherry Picked various bits from Samsung Code released for our device.
CPU OC: 192KHz - 186300KHz.
Cleaned up BLN code.
Added some WiFi fixes.
This is mainly a release based of the major overhaul.
Added more I/O Schedulers: BFQ (v3r4), Simple I/O, VR.
[1.5] Please see the posts for the evolution of this version, the last post should detail the final changes (208) #151 , #161 and #208
[1.4] Scaled down the defaul ondemand governor to 1.566 (slight oc). Should perform really well for people satisfied with the defaults.
[1.4] Added more governors for people to play around with, note, I would like to trim it down in futures versions of cymbaline. The newly added ones are (thanks to whoever developed them):
brazilianwax
ondemandx
lionheart
SavagedZen
wheatley
scary
[1.4] Moved init.qcom.post_boot.sh into the ramdisk, to not depend on ROM variances. You should use the /system/etc/init.d hook (of course busybox must be installed).
[1.3] bugfix: the max. freq. was not enabled in 1.2, fixed in this release.
[1.3] some compiler tweaks added building this version of kernel.
[1.2] Restored settings to Stock Governor & I/O scheduler.(ondemand/cfq)
[1.2] BUGFIX: BLN and TouchKey backlight interactions for the "on" settings were conflicting. restored to UCLD2 behavior.
[1.1] Default Governor is tegraks lulzactive.
[1.1] Default CPU Scaling Max. is 1.566MHz.
[1.1] Available Governors (Most governors tuning via sysfs interface please google)
smartass V2
badass
lazy
intellidemand
lagfree
interactive
lulzactive (default)
[1.1] Using Faux's CPU and Voltage table
[1.1] Faux's GPU Overclock (not tunable from userspace)
[1.1] Max Overclockable Frequency: 1.728MHz
[1.0] BLN support.
[1.0] UTF-8 Support.
[1.0] Kernel symbols enabled (some apps require it)
[1.0] init.d: via busybox run-parts, place your scripts in /system/etc/init.d/ (chown root.shell) (chmod 755)
[1.0] insecure (ro.secure=0)
[1.0] adb root
[1.0] adb default shell bash.
[1.0] All IPV6 options enabled.
[1.0] CIFS is a kernel module (/lib/modules/cifs.ko)
[1.0] bootanimation support, drop your favorite bootanimation.zip in /system/media.
[0.0-0.6] Front Camera fully functional WITHOUT any lib hacks for Skyrocket ICS ROMS. Which means keep dont change the libs.
[0.0-0.6] Back Camera working.
[0.0-0.6] Completely removed MMC_ERASE capability, that means with the running kernel any erase to internal sdcard will error out. This is implemented as per the "brickbug" recommendation.
[0.0-0.6] General code merges and cleanup.
DOWNLOADS
Click to expand...
Click to collapse
Always, download the latest one, unless you have a need to be on a older version.
[16-OCT-2012] [RD04][2.8] Please read the changelog above.
CYMBALINE-RD04-2.8-cwm5.zip
[16-SEP-2012] [RD04][2.7] Please read the changelog.
CYMBALINE-RD04-2.7-FINAL-cwm5.zip
[12-AUG-2012] [RD03][2.6] Please read the changelog, this post again and post #2 again.
CYMBALINE-RD03-2.6-cwm5.zip
[09-AUG-2012] [RD01-2.3] Please read the changelog, this post again and post #2 again.
CYMBALINE-RD02-2.3-cwm5.zip
[07-AUG-2012] [RD01-2.2] Please read the Changelog and post #2. Again providing two versions, if the 1.8366GHz causes problem booting (e.g. bootloops) flash the 1.566GHz one..
CYMBALINE-RD02-2.2-cwm5-1.836GHz.zip
CYMBALINE-RD02-2.2-cwm5-1.566GHz.zip
[06-AUG-2012] [RD01-2.1] Two versions available for download. If your phone cannot handle the 1.8366GHz (bootloop) then flash the 1.566GHz version
CYMBALINE-RD01-2.1-cwm5-1.836GHz.zip
CYMBALINE-RD01-2.1-cwm5-1.566GHz.zip
[06-AUG-2012] [RD01-2.0] No Overclock version. That is max. CPU is capped at 1.512GHz, use this if you are having bootloops flashing the overclockable to 1.83GHz version. CYMBALINE-RD01-2.0-NO-OC-cwm5.zip (1.512GHz Max.).
[05-AUG-2012]: [RD01-2.0] CYMBALINE-RD01-2.0-cwm5.zip. Please see the change log. (Overclockable upto 1.836GHz).
[27-JUN-2012]: (3.0.8-1.5) CWM Flashable (TouchWiz based ROMS only). Download
[24-JUN-2012]: (3.0.8-1.4) CWM flashable. ICS ROMS (SAMSUNG TouchWiz based) ONLY. NOTE: THIS WILL REPLACE YOUR /system/lib/modules with a symlink to kernel modules (Please see revert section). (installation, just flash in CWM nothing else). CYMBALINE-1.4-cwm5.zip
REVERTS
Click to expand...
Click to collapse
[STOCK-UCLF6] (Official Samsung/ATT Stock Kernel). CWM5 flashable. kernel-sgh-i727-UCLF6-cwm5.zip
[STOCK-UCLE2]: CWM flashable. ATT SKYROCKET, ICS BUILDS ONLY. Download
KNOWN ISSUES/BUGS
Click to expand...
Click to collapse
None as of now.
ADD ON/APPS
Click to expand...
Click to collapse
As far as I know (not tried it), only SystemTuner provides the "lipstick" for reading the voltage table and allowing you granular control of the voltage for each frequency.
Most of the other apps, can I believe allow you to change the CPU/IO scheduler/Govs, safely.
Or, if you are hardcore, please see this post 249 by ReedX50v (hit his thanks button), for graciously providing flashable init scripts, you can use one as a template to what works for you.
SOURCE AND OTHER INFO
Click to expand...
Click to collapse
As per GPL requirements, I will post the source as soon as I have me repo setup. The current version is built straight from SAMSUNG Sources for the Korean SKYROCKET LTE. You can build it yourself from here:
Source Git Hub Repo: https://github.com/mohankr/android_kernel_samsung_msm8x60.git
CREDITS/THANKS
Click to expand...
Click to collapse
Although, there was a lot of effort involved in bringing this kernel, but without the following people doing the heavy lifting, it would not be possible..to bring it so quickly.
Faux123 (for majority of the heavy lifting) (gov, oc, uv and gpu). I just ported it over to our device kernel.
tegrak (lulzactive governors)
creams (bln)
romanbb (bln)
DaG (bln)
ReedX50v for providing flashable scripts.
samsung, for at least releasing the source for a similar device, so i could bring this..
whoever were the original authors for the governors included, that were not part of the source.
Click to expand...
Click to collapse
reserved
1) ROM Developers Info.
If you are planning to bundle this kernel in your ROM. The Samsung init.qcom.post_boot.sh has been disabled and moved to the ramdisk. Your changes should be incorporated in /system/etc/init.d scripts (of course need busybox installed). NOTE: the init scripts always execute after the above script, so you can always override the values there.
2) How do I find the available governors?
Below adb command, will tell you what the available governors in the kernel are (assumes adb/rooted) (shown in 1.4 kernel):
Code:
$ adb shell cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
brazilianwax ondemandx SavagedZen wheatley scary smartassV2 badass lazy intellidemand lagfree lulzactive interactive conservative ondemand userspace powersave Lionheart performance
3) Sysfs interface for GPU OC?
The GPU OC Modes are supported:
Available frequencies:
Code:
3D: 320000000, 300000000, 266667000, 228571000, 200000000, 177778000, 27000000
2D: 266667000, 228571000, 200000000, 160000000, 96000000, 27000000
The default (and the default in CYMBALINE Version 2.0 and above) stock values are:
Code:
3D @266MHz and [email protected]
To change the values use the sysfs interface here are the relevant samples to max it all out. (you can make an init script to make it permanent)
Code:
#!/system/bin/sh
echo "Overclocking GPU"
echo 320000000 > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk
echo 266667000 > /sys/devices/platform/kgsl-2d0.0/kgsl/kgsl-2d0/max_gpuclk
echo 266667000 > /sys/devices/platform/kgsl-2d1.1/kgsl/kgsl-2d1/max_gpuclk
echo "End"
exit 0
4) Why does the CPUSpy show reaching max. CPU frequency, even though the bundled values 1.52GHz?
This is caused by SAMMY ROM ramping up the CPU's to the Max. during boot. I am looking for a clean way for this to not happen, once I find the source (I have few things narrowed down)...
This is really exciting! Read about this in your other thread and started to pitch a tent.
Bluetooth is not a deal breaker for me so let me know if you need a tester for camera.
Can test on whatever rom needed. Stock, etc.
Sent from my SAMSUNG-SGH-I727 using xda premium
Can't wait to download this when Bluetooth & camera are fixed.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Some more great work from you mohan. Have you been looking for any possible bln/overclock patches now that you have the source? I'm happy to help in any way I can.
jomeister15 said:
Some more great work from you mohan. Have you been looking for any possible bln/overclock patches now that you have the source? I'm happy to help in any way I can.
Click to expand...
Click to collapse
Thanks. Yes, those will be the first in the TODO list..Also, people have pointed to other interesting kernel mods (like siyah)..Once the source is up I am hoping it will spur involvement from everyone, that will be great..
BLN support?
raviluke said:
BLN support?
Click to expand...
Click to collapse
Umm, look up one post?
The cm9 and aokp guys are gonna love this.
Sent from my SAMSUNG-SGH-I727 using xda premium
if da_G or faux123 does their magic with the kernel for aokp/cm9 now that teh source is avail that would be lovely .
truly
Those guys are long gone..
Sent from my SAMSUNG-SGH-I727 using xda premium
Well, good thing folks like the OP are still around then...
Thought I was noticing a theme in your rom/kernel names and was going to ask if this (and Embryo) were named for Pink Floyd songs.
But then I thought I'd use Google before asking and I found your post stating that Embryo was in fact named as a dedication to the Pink Floyd song (here: http://forum.xda-developers.com/showpost.php?p=25925976&postcount=287 ).
Would love to see you do something -- anything -- with the song, "Several Species of Small Furry Animals Gathered Together in a Cave and Grooving with a Pict"
ReedX50v said:
Well, good thing folks like the OP are still around then...
Click to expand...
Click to collapse
Agreed
Sent from my SAMSUNG-SGH-I727 using xda premium
mindmajick said:
Those guys are long gone..
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Da_g is gone, he got a g-note i believe? But i'm sure faux will make an ICS kernel once the official i727 kernel source is released.
T989 source is here.
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SGH-T989
3rd one down.
Sent from my SAMSUNG-SGH-I727 using xda premium
Wow thanks, mohan you rock
mindmajick said:
T989 source is here.
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=SGH-T989
3rd one down.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks..let's see if they left the the key bluetooth files..i got camera to work w/o preview..
EDIT: cool..the bits are there ..now to compile and boot..
oh crap I forgot about mohan . apologies
Nice. Nice. Nice. Nice. Nice.
Uc/UV here we come
sent from my I727 TROLLING DEVICE using XDA premium.
Hi all,
this is the thread about the CM version of the well-known Boeffla-Kernel for the Samsung Galaxy S3 lte.
Note: This kernel is only for CM based roms!!! Do not install it on a Samsung based rom!!!
For Omnirom, please do not use the CM kernel but the separate Omnirom kernel I also provide.
If you have questions to settings, presets, others configuration and wanna share your configuration, head over to the unofficial Boeffla-Config App Config sharing thread:
http://forum.xda-developers.com/showthread.php?t=2621308
Support
First read about "Known Issues" in 2nd post!
FirstSecondly read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app.
Click here to learn about using the config app.
I will refuse any support if you do any undervolting and experience freezes or hot reboots.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it. Test w/o Xposed first, if issue still occurs then report here. If issue doesn't occur anymore, also report here so I can list under "Xposed known issues"
Lastly, if you are using one of the latest versions with anykernel, please read this before proceeding
Lord Boeffla said:
Hi all,
it is time for the first CM13 kernel with the new anykernel concept.
Before you start, make sure you have read and understood the following:
http://boeffla-kernel.de/index.php/7...new-anykernels
If you ask questions which are addressed in this article, or you have issues which are a consequence of not reading the article, I will not answer. It is your responsibility to understand what you do BEFORE you do it.
(and also read this for more background: http://boeffla-kernel.de/index.php/6...ernels-new-app)
Side note:
Although the kernel is now likely to be much more compatible with custom roms using CM basis, I will not change my support conditions at all. If you report an issue on a non-original CM rom, do not expect me to react (http://boeffla.de/index.php/support/support)
Ensure you update to latest Boeffla-Config App 2.3.1 BEFORE you flash the new kernel !!!
Enough threatening now, here we go:
Version 5.1-beta1
12.07.2016
Note: This is the first Boeffla-Kernel with the new anykernel concept.
Make sure you read and understand the basics: Boeffla-Anykernel Know-How and New concept kernels/New app
Note: You have to use Boeffla-Config version 2.3.1 or newer in order to use all functionality !!
This kernel as exactly the same functionalities as the last stable kernel release
Enjoy
Andi
Click to expand...
Click to collapse
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Features
* To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD
* Support for generic framework naming convention framework-2.jar instead of proprietary rom framework names
* Upstreamed to Linux 3.0.101(www.kernel.org)
* CPU "soft" overclocking to 1500 or 1600 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable zRam
* Configurable touch-to-wake
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Configurable LED for fading mode, speed and brightness
* Softkey touch button LEDs controllable
* Configurable charger rate for AC, USB and wireless (default increased to 1100 mA for ac charging)
* Charge information display support via Boeffla-Config V2 app
* Charging logic supports ignore unstable power and remove safety margin
* Boeffla-Sound engine V1.7.1 to unleash the power of the Galaxy S3 audio chip
* Additional governors: zzmoove 0.8, pegasusqplus, smartassv2 and lulzactiveq
* Governor profiles for pegasusq, pegasusqplus and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, ZEN, BFQ (v6r2) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* Black crush fix for better balanced display
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off, new Mattiadj tweak set included)
* WIFI Multicast filter for better battery life
* WIFI wakelock times reduction
* Proportional rate reduction for TCP
* TCP congestion changed from Cubic to Westwood
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d - set correct permissions!)
* NTFS (read-only access only!) compiled as a module
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* exFat support (if supported by used firmware)
* Battery monitor wakelocks reduced
* Android logger can be disabled
* Disabled various debug logs and traces
* Frandom compiled as a module (for mods like Crossbreeder)
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback) - now compatible with tools like kTool
* Kernel initialisation log file (with history of 3 log files)
* Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Compiled with Google arm 4.8 toolchain
* Internal kernel busybox version 1.24.2
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
Downloads over at my AFH Folder
History
Basically I created the Samsung version of Boeffla-Kernel as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!! Which in fact for the CM kernel means now... close to CM kernel sources.
This said, I will definitely NEVER implement:
dual boot (I do not need it)
color "calibration"
real hard overclocking higher than 1600 MHz as this is outside of Exynos specs
f2fs - it is known to cause various issues and compatibility problems
a CAF based kernel
[*] anykernel method to use the ramdisk of the installed rom
anything that requires upstreaming of kernel parts to a higher kernel major version
Any TC other than google's
So do not even ask for it. Everything else I am happy to check and decide.
Compatibility
To reiterate it again: This kernel is only for CM13 based ROMs. It is not designed to run on Samsung based roms! AOSP based is not tested, though it should work.
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
Donation
If you like my work, feel free to donate: Donation-Link
You will receive a personal donation code which unlocks some nice comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Lord Boeffla's Github repository: http://github.com/andip71
My source can be found below, at "DevDB Information"
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* Lord Boeffla (For providing kernel in the first place )
* Yank555
* ZaneZam
* Hardcore
* Chainfire
* Harunjo
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Supercurio
* Mialwe
* Entropy512
* Faux
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in TWRP recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
XDA:DevDB Information
Boeffla Kernel, Kernel for the Samsung Galaxy S III I9300
Contributors
limjh16, n0aaz, aaz03, ZaneZam, Lord Boeffla
Source Code: https://github.com/limjh16/boeffla
Kernel Special Features:
Version Information
Status: Beta
Current Stable Version: 5.0
Stable Release Date: 2016-07-04
Current Beta Version: 5.1-b7
Beta Release Date: 2016-08-30
Created 2016-06-09
Last Updated 2016-08-30
Known Issues
Known Issues NOT involving Xposed
1. SuperSU and Superuser other than Stock DOES NOT WORK on Temasek ROM and possibly all other CM13 ROMs
2. F2FS WILL NOT WORK, AND WILL NOT EVER WORK, AS DESCRIBED IN OP
Known Issues involving Xposed
None I have experienced thus far.
To-Do List
1. Fix SuperSU because I really love it.
2. Archi Optimisations Test Doesn't work
3. Make file names correspond to "beta" tag
1. Attempt bug fixing Archi Opti Test
1. Test on AOSP ROMs
2. Dragon TC??
Installation
Dirty flash works fine, just remember to clear cache.
If you are coming from another kernel e.g. agni kernel, you must wipe /system (not just flash ROM zip for the updater script) and flash everything accordingly.
If you need specifics on what to do first, follow ROM installation instructions and right after you flash ROM zip just flash boeffla ZIP
If you still don't understand you should not be here and should be reading up on what flashing zip is...
Credits & a History Lesson
Credits other than those listed in OP:
1. @Lord Boeffla for allowing me to port, and post this thread.
2. @ZaneZam for guidance
3. @aaz03 YES I DID IT
I take absolutely no credit, all work was done by @aaz03 and all I did was follow his instructions and pester @ZaneZam a bit, and I got a flashable zip that works.
A very, very unimportant history lesson
So, I was looking at github.com/n0aaz and I saw he was trying to port boeffla. I PM'ed aaz, and he told me his laptop broke so he couldn't continue. He then asked me to help him continue and that he was very close to completion. However he rarely responds to PM, so I contacted @ZaneZam to ask for more guidance. He was very helpful and kind of guided me through how I should use the build script/edit the build script, and how to manage the boot.img
Well, @aaz03 you were very very close to completion indeed, you just had to take a new boot.img from CM. Uber toolchain was probably another factor.
Boeffla 5.0beta34 will be built this weekend or when I have time.
I will not be providing new Boeffla Builds where the changes do not concern i9305 (eg, just source updates for other devices) I will only be providing when there are universal updates.
Feel free to post bug reports here instead of the bug reports tab (I don't even recall if I enabled that tab)
If you want screenies tell me, I got stuff to do for now
Can someone help test with other ROMs and especially AOSP ROMs?
limjh16 said:
Credits other than those listed in OP:
1. @Lord Boeffla for allowing me to port, and post this thread.
2. @ZaneZam for guidance
3. @aaz03 YES I DID IT
I take absolutely no credit, all work was done by @aaz03 and all I did was follow his instructions and pester @ZaneZam a bit, and I got a flashable zip that works.
A very, very unimportant history lesson
So, I was looking at github.com/n0aaz and I saw he was trying to port boeffla. I PM'ed aaz, and he told me his laptop broke so he couldn't continue. He then asked me to help him continue and that he was very close to completion. However he rarely responds to PM, so I contacted @ZaneZam to ask for more guidance. He was very helpful and kind of guided me through how I should use the build script/edit the build script, and how to manage the boot.img
Well, @aaz03 you were very very close to completion indeed, you just had to take a new boot.img from CM. Uber toolchain was probably another factor.
Click to expand...
Click to collapse
Heh, very good job i couldn't be very active on xda because of all my exams. Even though i don't have a 9305 anymore i'm glad that you managed to fix issues i had to face . Good continuation
aaz03 said:
Heh, very good job i couldn't be very active on xda because of all my exams. Even though i don't have a 9305 anymore i'm glad that you managed to fix issues i had to face . Good continuation
Click to expand...
Click to collapse
See that you got yourself a redmi note 3 pro... wanted to get that too except i realised I rather save up for a Nexus
P.S. don't quote OP, I got this thread subscribed
limjh16 said:
...
Also, (a little advertising) what is the behavior of button backlight in boeffla?
Click to expand...
Click to collapse
Your advertising worked fine
I didn't know you've just started a Boeffla thread! Well done! Thanks for your work.
My answer to "what is the behavior of button backlight in boeffla?" is: I don't know, I didn't test.
FLooDW said:
Your advertising worked fine
I didn't know you've just started a Boeffla thread! Well done! Thanks for your work.
My answer to "what is the behavior of button backlight in boeffla?" is: I don't know, I didn't test.
Click to expand...
Click to collapse
Oh haha
Just felt lonely here.
I'm sorry if I was breaching any xda rules haha
Sent from my GT-I9305 using XDA Labs
Had time after dinner, here's beta34: https://www.androidfilehost.com/?fid=24572369242686106
Accessible via folder link in 1st post too. Now I bother to change zip names so it will be beta34 instead of alpha1 haha...
Anyways, as I was playing around trying to find a fix for supersu, I made backups and flashed while taking a log. Well, after I booted to system and prepared adb for a log, it booted, and surprisingly no bootloops! And it's a wierd solution that I found: Don't charge phone while booting. I attempted this 2 times, and the 2nd time it worked because I was not charging phone. Wierd? I know right...!
Great to see that development is still strong after all those years. Congrats on getting it all done and thanks to all your work you did the last few weeks/months.
Whats your problem whit f2fs?
The original boeffa support it.
Its really good future and really improve the performance.
F2FS has noting todo with the mentioned optimizations. Both can survive next to each other .
---------- Post added at 07:34 PM ---------- Previous post was at 07:12 PM ----------
Which kernel or sound app are you using or recommend to configure the beoffla sound settings? Can you link it?
Its already linked in op, sorry.
Running this on CM13 (pan's build, set to Muppett's RIL).
All seems to be working OK so far.
I'm using the Boeffla Control App V2 linked to in the OP. This has Boeffla sound settings in it, all seems to be working fine.
Now I just have to wait and see if the network issues I get when I use AGNi kernel on CM13 (but not CM own kernel) stay away.
Sorry haven't seen it in op. I am a newbie and didn't read the op proper .
Small issue - I set the charging current to 1500mA and turned on ignore unstable charging etc.
When I do this on AGNi, the 'Galaxy Charging Current' app says 1500 for 'reference', 'maximum' and 'average'.
On Boeffla it says 1500 for 'reference' but only 1000 for the other two numbers.
I had a bootloop when try boefla kernel with cyanide latest version.
So I try it with temasek and everything's working fine here, will test to see if the ril problem is fixed. Good work ! Thanks for bringing back this awesome kernel.
Mrxyzl said:
I had a bootloop when try boefla kernel with cyanide latest version.
So I try it with temasek and everything's working fine here, will test to see if the ril problem is fixed. Good work ! Thanks for bringing back this awesome kernel.
Click to expand...
Click to collapse
Seems like doesn't work with aosp.
Sent from my GT-I9305 using XDA Labs
Glenn2 said:
Small issue - I set the charging current to 1500mA and turned on ignore unstable charging etc.
When I do this on AGNi, the 'Galaxy Charging Current' app says 1500 for 'reference', 'maximum' and 'average'.
On Boeffla it says 1500 for 'reference' but only 1000 for the other two numbers.
Click to expand...
Click to collapse
Try using ampere or just the built in on the 1st page of boeffla config app, it'll correspond.
Also, now you can set charging current to 1600
Edit: http://i.imgur.com/IMlEiau.png
Sent from my GT-I9305 using XDA Labs
rodman01 said:
Sorry haven't seen it in op. I am a newbie and didn't read the op proper .
Click to expand...
Click to collapse
If you're a newbie all of us have not been born yet
Sent from my GT-I9305 using XDA Labs
Temasek + boeffla i cant hear any voice when call nor people can hear me.. Not even in loud speaker.. Or am i missing something? But boeffla rock!
I had this prob on unicorn aokp + agni4.5.5. So i stay stock. But because of boeffla, i went back to cm
Thank for porting.
Sent from my GT-I9305 using XDA-Developers mobile app