Version 22 is up
Here are the changes
1. Utilizing TCP congestion Veno in IPv4
2. Added handler for kernel command functionality
3. Added ioctl to set/get clk rate
4. reduce HDCP re-negotiation delay
5. fix hdcp hotplug issue
6. disable windows in dc disable
7. Avoid timer calibration on slave cpu
8. cross check connection state on receiving interrupt
Here is the link
Version A
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver22a.zip
If you like our work, please donate
-----------------------------------------------
Version 21 is up
1. Added "conservative" governor when screen is off for better mp3 playback
2. Enabled JRCU_lazy for less memory barriers in kernel
Here are the link
A version (with voodoo sound module included in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21a.zip
B version (no voodoo sound module included in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21b.zip
LMK how it goes.
BTW, PLEASE donate, donations are greatly appreciated so please do not hesitate Thanks
_______________________________________________________________________
Version 20 is up
20a
1. Voodoo sound included in the kernel
2. Fixed usb lag
3. Disabled JRCU_lazy
Here is the link.
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20a.zip
20b
1. No voodoo sound in the kernel
2. Fixed usb lag
3. Enabled JRCU_lazy
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20b.zip
LMK how it goes.
Please dont hesitate to donate, it is greatly appreciated. Thanks
----------------------------------------------------------------------
Version 19 is up
Here is the link
Version a (voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19a.zip
Version b (no voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19b.zip
Lmk of any reboots. Thanks.
-----------------------------------------------------------------------
Version 18 is up
1. Fixed typo in JRCU implementation
2. Disabled watchdog timer
3. fixed a few unbalanced IRQ for better resume
4. Updated emc clk for multiple dcs
5. usb : ECHI : synchonize shutdown and resume
6. Fixed wrong handling of dc enable
7. Fixed wrong aspect ratio information
8. Add underscan capability exposure via sys
BTW, Big thanks to all who donated and for the hdmi cable that I am able lto test my kernels now with hdmi
Here are the link
18a (with voodoo module in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18a.zip
18b (no voodoo module in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18b.zip
Please donate Thanks
LMK how it goes.
Update: Files were swapped by mistake..it's now fixed
-------------------------------------------------------------------------
Versino 17 is up
1. Implemented clean code of JRCU (Simpler RCU implementation for SMP systems)
2. Forced USB charging
3. Echi, changes
17a
Note: This kernel has voodoo included in the kernel so please delete your voodoo module if you have one.
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17a.zip
17b (no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17b.zip
BTW, if you like our work, please dont hesistate to click on our donations button. Thanks
LMK of any issues. Thanks.
-----------------------------------------------------------------------------------
Versino 16 is up
1. Hdmi, echi and spi changes as per nvidia's
2. i2c recovery implemented instead of simple reset
16a (With voodoo sound built-in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16a.zip
16b (No voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16b.zip
BTW, if you like our work, please don't hesitate to click on donations button It will be greatly appreciated. Thanks.
-------------------------------------------------------------------
Version 15
1. Fixed the "waking up interminently bug"
Please let me know how it goes
15a (HD and Clemsyn Combo)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15a.zip
15b (Revolver and Prime)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15b.zip
PLEASE CLEAR YOUR DALVIK-CACHE AFTER FLASHING THIS KERNEL. THANKS
Please do not forget at your donations are greatly appreciated so don't hesitate to click on our Donate button
-------------------------------------------------------------------------------------------
Version 14 is up
1. Updated hdmi per nvidia's
2. Changed timings in kernel to use Jew's memory timings and lowmemory values (no need for init.d script)
3. Enabled adb debugging as per request
4. Increased 2d/3d timings to 425 (missed to increase it when I changed base)
Here is the link
14a (For HD ROM and Clemsyn Combo)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14a.zip
14b (for Prime and Revolver)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14b.zip
If you like our work, pls click on our donations button...It will be greatly appreciated. Thanks.
---------------------------------------------------------------------------------
Version 13 is up
1. Based on 8.6.6.9 kernel
2. Increased voltage on 1544 frequency
3. Added VR scheduler per mike1986 request
4. No voodoo sound at the moment
WARNING: The voltages are up so please Undervolt according using PimpMyCpu
BTW, please click on our donations button if you like our work. THANKS
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver13b.zip
-------------------------------------------------------------
Version 12 is up with the following changes.
1. Lowered bus speeds in high frequencies to >1000
2. Lowered multiplier to reach the appropriate frequency for the new bus speed
3. Used 1646 instead of 1656 frequency.
With voodoo sound in kernel:
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12a.zip
For prime and revolver (no voodoosound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12b.zip
BTW, dont hesistate to click on our donation link. It will be greatly appreciated. Thanks.
---------------------------------------------------------------------------------
Verson 11 is up with the following changes
1. Included timings by Blades
2. Version a (voodoo in kernel) Version b (no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11a.zip
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11b.zip
** If you like our work, pls click on our Donation link under our sig **
------------------------------------------------------------
Voodoo version 10 is up with the following changes
1. i2c arbitration handling of error changed from simple reset to recovery
2. Increased epp and mpe timings as per Blades
3. Voodoo Sound remove from kernel for better compatibility with ROMS
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver10.zip
LMK how it goes and Please click on donation link if you like our work
** Testing Blades latest OC timings at the moment with voltage increases across the board **
---------------------------------------------------------------------------------
Voodoo version 9 is up...
1. Fix hdmi issues
Please report any waking up issues.. Thanks
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9.zip
** Voodoo sound is built in the kernel so please delete voodoo module for Prime 1.7 and Revolver ****
Version 9b (for Revolver and Prime with no voodoo in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9b.zip
-------------------------------------------------------------------------
Version 8 kernel is up and only for tegras getting bootloops
PLEASE STAY IN VERSION 7 IF YOU HAVE NO BOOTLOOPS SINCE IT HAS BETTER MEMORY TIMINGS
1. Lessen memory timings for Hynix memory
Version 8a (not for Prime unless you delete the voodoo module)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8a.zip
Version 8b (for prime)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8b.zip
Please let me know how it goes
Donations are greatly appreciated so please do no hesistate
-------------------------------------------------------------------------
Kernel version 7 is up
1. USB and HDMI optimizations per nvidia
Version 7a (not for Prime 1.7 unless you delete the voodoo sound module)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7a.zip
Version 7b for Prime 1.7 (no voodoo sound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7b.zip
Again, donations are welcome and greatly appreciated
--------------------------------------------------------------------------------------
Kernel for 3.2 Honeycomb version 6 is up
1. Trackpad functional (thanks asus)
2. Less stutter in portrait mode (subjective though, so need your feedback on this)
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver6.zip
Btw, Donations are welcome and greatly appreciated
-------------------------------------------------------------------------
Kernel 3.2 HC ver 5 is up
1. Updated per nvidia and fixed an issue with nvidia's changes not compiling
2. Please see my github for changes
TO BE ABLE TO USE WITH PRIME 1.7 PLEASE DO THE FOLLOWING BEFORE INSTALLING KERNEL
1. Delete voodoo-sound.ko in /system/lib/modules by using file xpert or root explorer
2. Turn off and install kernel
BTW, if you like our work please click on donations button under our sig, it will be greatly appreciated. Thanks.
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver5.zip
--------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------
Kernel 3.2 HC ver 4 is up - Not compatible with Prime 1.7 or Revolver 2.0 (only for Stock Rooted Rom and Clemsyn ROM combo)
1. Reverted Memory speed changes
2. disabled mmap on framework
3. nvmap : fix GART pinlockups
4. nvmap: single page allocation policy corrected
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver4.zip
Kernel 3.2 HC ver 3 is up - not for Prime 1.7 beta or Revolver 2.0 (only for Stock Rooted 3.2 ROM and clemsynROM)
1. EMC changes
2. Memory speed changes
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver3.zip
BTW, donations are greatly appreciated
-----------------------------------------------------------------------------------
Kernel 3.2HC ver 2 is up - not for Prime 1.7 beta (use version 1 for Prime 1.7)
1. Ext4 on system/data/cache data changed to writeback mode
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver2.zip
Semi-Elite version (not tested because wife took my transformer to work, so need feedback on this)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2semi-elitever2.zip
----------------------------------------------------------------------------------------
Kernel for 3.2 HC is up
1. Same OC as version 18
2. Horizotal scrolling smooth even upside down but ufortuately vertical still stutters
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver1.zip
-----------------------------
Version 18
Here are the changes
1. Max overclock set at 1.640 as per blades
2. avp/vde/bsea/bsev/sclk/hclk overclocked to 300
3. Read_ahead set at 1024 in kernel so if you are in stock rom, this will set at 1024.
4. slight changes in interactive governor
5. GPU 3d/2d overclocked at 425
WARNING: Not all transformer can take these timings(only elite tegras) so please backup, flash with caution and make sure you are familiar with nvflash
LINK:
www.tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio-Cpajustes1.6ver18gpu.zip
-------------------------------------------------------------------
BTW, if you like our work, pls click on the donations button under our sig. Thanks
Version 17
1. Tweaked voltages and increased max to 1.646
2. Increased voltages (please undervolt via PimpmyCPU)
3. A few avp changes and usb changes per nvidia
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn-Blades1.6version17.zip
If you like our work, pls click on donations button under our signature. THANKS!
**********
Version 16 1.6ghz
**********
1. Minor changes in voltages
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel16.zip
***********************************************
1.7 ghz!!!!!!!! ONLY FOR THE SUPER ELITE TEGRAS
***********************************************
1. Maxed cpu and core voltages as per nvidia's
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.7rel15.zip
Please be advised that this is the max I would go...no more.
BTW, if you like our work, pls click on the donation button. Thanks.
I'll be going on vacation so no updates for awhile
----------------------------------------------------------------------------------------------
Version 15 is up
1. Reverted back to Blades original voltates
2. Increased voltage for 1.6ghz for better stability.
3. Changed clock rate limit for 3d
4. Bootup speed reverted back to 1ghz
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel15.zip
If you like our work, please click on our donate buttons
-------------------------------------------------------------------------
1. NTFS Fully functional !!!!
2. Few changes in kernel
3. Added few erratas for stability
4. PS3 controller functional
5. Undervolting via PimpmyCPU or Setcpu
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel13.zip
Also available now at KERNEL MANAGER
If you like our work, please click the donations button under our username Thanks
-----------------------------------------------------------------------------
Release 12 - built from source with OC code and undervolting and voodoo sound
1. Built from source (Thanks Asus)
2. Undervolting via Pimpmycpu by Cpajuste's code
3. Overclocking via Blades
4. Voodoo sound by Supercurio
5. oVERCLOCKS AUTOMATICALLY TO 1.4GHZ, NO NEED FOR CPUMASTER OR SETCPU
6. NTFS not yet working
LINK
]
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel12.zip
IF you like our work, pls click on our DONATION button under our username. THANKS.
----------------------------------------------------------------------------------
6/22/11 - Version 11b
1. Fixed Elpida memory scaling
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6ver11b.zip
BTW, if you like our work, pls click on DONATE button under username. THANKS
------------------------------------------------------------------------------------------------
6/21/11 - Version 11
1. Increased pinmux driver strength of csus sensors
2. Added few changes via nvidia (see git)
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurioversion11.zip
6/20/11- version 10b
1. Added voodoo changes by supercurio
2. Added init.d support in the kernel (not sure if this will work but any help from ROM devs to test will be appreciated)
3. Latest OC by Blades
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio1.6rel10b.zip
BTW, if you like our work, please help me buy some diapers
----------------------------------------------------------------------------------------------------------------
6/20/11
Version 10 release
1. Same as experimental version B but added Blades' latest OC changes
Here is the link
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6version10release.zip
If you like our work, pls help me buy some diapers (just got the news, wife is pregnant)
------------------------------------------------------------------------------------------
6/18/11
Experimental version 10b...Here are the changes.
1. Reverted memory to 256 (original size) to prevent issues from other apps (I think 512 was a bit of an overkill)
2. Kept increased memory video framebuffers
3. Updated a UART changes in the board.
Here is the link
http://tunerspotter.com/clemsyn/Experimentalversion10b.zip
http://www.megaupload.com/?d=CH5EBQGA
BTW, if you like our work, don't forget our beer
-------------------------------------------------------------------------------------------------------------
6/18/11
Experimental version 10...Here are the changes
1. Enabled NTFS (pls report if it works or not)
2. Increased tegra video memory for better performance (LMK how your experience is)
Here is the link
http://www.megaupload.com/?d=WF1DAKCM
----------------------------------------------------------------------------------
6/18/11 Version 9
1. Disabled Jazelle Erratta and Thumb EE instructions
2. Enable PL310 errata, 752520 errata and 751472 errata
Here is the link
http://www.megaupload.com/?d=M1H9IZEM
IF you like our work, pls buy us a beer
--------------------------------------------------------------------------------------
6/17/11 Version 8b
Changes:
1. Pinmux changes
2. Updated BT drivers for kernel (hopefully fixes playstation controllers but I dont have any BT device at the moment)
3. 3d/2d GPU overclocked at 350000 to help with artifacts on elite version (had 400000 for 3d and 350000 for 2d)
Here is the link
http://www.megaupload.com/?d=QPRBIEA8
6/16/11 Version 8a Elite
1. fix on backlight (pls let me know how it works for you)
http://www.megaupload.com/?d=1VKHDT0C
6/15/2001 -- INTRODUCING MY VERSION 8 ELITE
Changes are as follows:
1. Tweaked memory settings and video drivers to FIX BROWSER CRASH - finally
2. Added bsea clk rate to the kernel
Here is the link
http://www.megaupload.com/?d=WE5GC5HC
IF you like our work, pls buy us a beer (still waiting my first beer)
--------------------------------------------------------------------------------------------------
6/14/2011
Version 7a ELITE
1. enabled config erratas for cortex 9 cpus
2. enabled nvmap carveout killer to help with browser crashing (still dont solve it though).
3. crypto AES updated to support dual cores
Here is the link.
http://www.megaupload.com/?d=SP6U6XAU
UPDATE: FOR BROWSER CRASH SET ENABLE PLUG-INS to ON DEMAND (browser setting--Advance)
6/13/11 Version 7 Released
Changes:
1. Moved ALSA to spdif (hopefully will fix audio in hdmi)
2. Added DSI support in video drivers
3. few optimizations in cache handling of memory added
Here is the link
http://www.megaupload.com/?d=PQV15NWC
6/13/11
Elite version of Ver 6 with a few changes:
1. Used 4.4.3 compiler
2. Updated serial drivers
3. Updated video drivers in the kernel
Here is the link
http://www.megaupload.com/?d=SEL0MQ3L
6/12/11
Updated version 6 with Accelorometer fix and overlay fixes in video drives
Here is the link
http://www.megaupload.com/?d=QZCNRAWO
--------------------------------------------------------------------------------------
6/12/11
Version 6 is updated with following changes
1. Fixed camera issues
2. Added a few fixes in dma and gpios
3. reverted DAS driver back to original
4. fixed a few video drivers
Here is the link
http://www.megaupload.com/?d=8IQZQSLV
Original kernel Asus kernel
http://www.megaupload.com/?d=GSIHUPJ6
BTW, If you like our work, pls buy us a beer
--------------------------------------------------------------------------------
6/10/11
UPDATE
Release 5a: Here is the link
http://www.megaupload.com/?d=GLDLWF2N
Changes:
1. SMP fixes
Update 6/8/11 --- RELEASE 5 ---------------------
New changes to kernel:
1. CPU OC'd still at 1.6ghz
2. 3dGPU, 2d GPU, vde kept at stock
3. Upgraded Audio driver to DAS
4. GPIO fixes in kernel included
Please let me know if it fixes audio issues. Thanks.
http://www.megaupload.com/?d=LHGNQXTO
BTW, if you like our work, please buy us a beer
-----------------------------------------------------
Update 6/6/11 release 4
Elite tegra version since not all tegra can run this kernel. The reasons are as follows:
CPU OC'd at 1600 (1000 default)
3d GPU OC'd at 400000 (300000 default)
2d GPU OC'd at 375000 (300000 default)
VDE OC'd at 300000 (250000 default)
Again, only for the elite tegras out there. Here is the link
http://www.megaupload.com/?d=JMVUMP0A
Please create a backup, then install kernel, then clear Dalvik-cache, the Wipe Cache partition. Goodluck.
BTW, if you like our work, please buy us a beer or two
Will create a normal version soon. Also this kernel is updated to nvidia 10.11.6 standards (except for wifi and usb at the moment)
Update 6/5/11 Release 3
http://www.megaupload.com/?d=2ZJI1J2H
Reverted to 4.4.0, CIFS built-in the kernel, updated to 1.5 ghz for better stability (I think)
Update 6/5/11 Initial Release 2
Fixed Camera/Sound/Flash etc, next up would be voltages for OC. Used 4.4.3 toolchain for better compatibility.
Source is up on my github (I apologize, its kinda messy but needed to release our kernel)
Here is the link
http://www.megaupload.com/?d=MNJF34WJ
BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)
And if you like my work, please buy me a beer Also you input is greatly appreciated
GITHUB
https://github.com/clemsyn/LatestAsusOC
Sweet. Downloading! I'll try it after I finish watching movie!
Sent from my Rooted Transformer running Primordial v3.1
GibMcFragger said:
Sweet. Downloading! I'll try it after I finish watching movie!
Sent from my Rooted Transformer running Primordial v3.1
Click to expand...
Click to collapse
Ooopps, just found out, no audio. Will fix this tomorrow but you can test it out.
Downloaded but the file has no extension.
Should I rename it to a zip file?
Then of course flash through cwm?
Sent from my Transformer TF101 using XDA Premium App
Mean Sixteen said:
Downloaded but the file has no extension.
Should I rename it to a zip file?
Then of course flash through cwm?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Must have uploaded the wrong file...Sorry, will upload again. But yes, you can just add .zip and that should be fine.
working fine for fine. OC all the way to 1.6. No problem with audio too (Equal sound on both speakers). wonder if its a placebo effect but speakers sounds slightly louder. Great work.
Edit: Yes, camera is broken, but no big issue. awaiting your fix.
clemsyn said:
Must have uploaded the wrong file...Sorry, will upload again. But yes, you can just add .zip and that should be fine.
Click to expand...
Click to collapse
Thanks for the quick reply. I will give it a go.
I can always reflash the stock kernel.
Sent from my Transformer TF101 using XDA Premium App
OnceHeaven said:
working fine for fine. OC all the way to 1.6. No problem with audio too (Equal sound on both speakers). wonder if its a placebo effect but speakers sounds slightly louder. Great work.
Click to expand...
Click to collapse
hmm..I'll try to format everything out. I might get my audio working, how about your camera? Is it working? LMK.
Ok, got my audio working, thanks...saved me some time...really have to go now, Goodnight to everyone.
Nope, camera is definitely broken. FC immediately. But no big issue cause I prefer to have a quick multi function device den to have a slow laggy device just for photo taking purposes.
clemsyn said:
hmm..I'll try to format everything out. I might get my audio working, how about your camera? Is it working? LMK.
Click to expand...
Click to collapse
So here's my initial observations.
Set CPU works.
quadrant doesn't. Says internal error or something
I can't go past 1400. Bummer. (Interactive governor)
Seems zippier.
As mentioned camera doesn't work.
Can't think of anything else.
Edit: forgot. The popping sound people have talked about. I have only heard this on a rare occasion but now I hear it frequently. For example till now I only remember hearing it when first typing something. Now I even hear it opening programs. In fact opening my gallery I heard it 3 times in just a few seconds.
Edit 2: YouTube broken also. Tries to buffer then the popping sound. Then tries too buffer...popping...repeat until it fails.
Definitely much snappier though.
Hope this helps!
Look forward to more. NICE WORK!!!
Sent from my Transformer TF101 using XDA Premium App
oh! try it right now!
edit: 1.6G is not stable for me. got a reboot when i am opening wifi
edit: 1.5G no luck either
Video playback terrible 720p and no sound on video
Sent from my Transformer TF101 using Tapatalk
Also confirming YouTube problem
Sent from my Transformer TF101 using Tapatalk
Clemsyn, nice to see you there. So you trade your Gtablet for Transformer
Sent from my Transformer TF101 using Tapatalk
dirwdirw said:
oh! try it right now!
edit: 1.6G is not stable for me. got a reboot when i am opening wifi
edit: 1.5G no luck either
Click to expand...
Click to collapse
Try 1.4..I got mine stable at that speed.
lithiasalesjs said:
Video playback terrible 720p and no sound on video
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Will check this out...Thanks.
ivan.volosyuk said:
Clemsyn, nice to see you there. So you trade your Gtablet for Transformer
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Still have my Gtab that I just bought recently...been trying to get 2.6.36 kernel to boot on that thing but I'm kinda careful because of the bad blocks I made so far. Anyways, got this Transformer and decided to make a few tweaks to get 3.1 OC kernel to boot. As you can see still has some issues Hope asus releases their source ASAP though..
clemsyn said:
Try 1.4..I got mine stable at that speed.
Click to expand...
Click to collapse
1.4G is rock stable as netarchy's kernel
clemsyn said:
Introducing the first overclock kernel for 3.1 (Hate to wait for Asus to release their source so might as well make it ) plus hate to just let Xoom have all the fun. I used Blades OC source and his advice (darn that guy is good, hope his family member gets better soon). This is my first release for Asus Transformer (thanks to wifey for giving me one). Anyways, I used an old compiler so there might be issues. Please let me know. Have to let the kids go to sleep now. Goodnight!
New Link
http://www.megaupload.com/?d=YWUIE8XU
BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)
Update: Just found camera is broken, might need to use the latest compiler for this
And if you like my work, please buy me a beer
Click to expand...
Click to collapse
Woww..this is very good work. dnload it now....
opps, the link is hv a problem.
It say "The file you are trying to access is temporarily unavailable. Please try again later."
update: it's downloading now...
Clemsyn, you are a legend, dude. Your work on the GTab changed the course of that device forever. So stoked to have you on the Transformer...this is going to be amazing. Can't wait to see this thing stabilized. There is definitely a beer in your future!
Sent from my Transformer TF101 using XDA Premium App
Related
HEY GUYS, SINCE WE ARE NOW A TEAM
ALL FUTURE DEVELOPMENT WILL CONTINUE ON THE FOLLOWING THREAD
I HAD GREAT FUN DEVELOPING FOR YOU ALL GUYS.
HOPE WE AS A TEAM CAN DEVELOP EVEN BETTER.
http://forum.xda-developers.com/showthread.php?t=1252698
Changelog
Kernel Changelog:
v1.8 [30/08/2011]
Reworked Battery Driver
Reworked CWM Recovery
Now 11 ROM's support in Multiboot
v1.7 [15/08/2011]
Multi Boot
Power off Option in CWM
Dynamic OC (ability to change the maximum freq)
Modify the max_blk_count value to prevent overflow.(sdcard related)
mmc: core: Fix dereferencing after NULL check (sdcard related)
Lower vfs_cache_pressure 100->25.
ARM: fix some sparse errors in generic ARM code
lib: Improve the performance of memcpy and memmove of the general version
lib: Introduce some memory copy macros and functions
ashmem: fix deadlock when system is low on memory
v1.6 [11/08/2011]
Batter Driver Back to Original - Only Change is added Compensation for Data On
Stable OC
UV Works for All Frequencies - Can be checked via dmesg
Removed SavagedZen and SmartAss for now.Giving Problems. Will come back in future versions.
SDCard Partitioning Problem Solved - Ext3 partitioning for mmcblk0p2 - Can be converted to Ext4 Using g3mod app.
Kernel Flashing via CWM Recovery Working
Kernel Hz: Lite:256 Performance:300 Ultimate:500 Extreme: 1000
Noop I/O Scheduler by default
Fixed Typo in Bootlogo
v1.5 [05/08/2011]
CompCache
BootLogo
TinyRCU
Battery Driver Reworked - Please test and give feedback
v1.4 - 31/7/2011
CWM Recovery In Kernel
Fixed CPU Freq Driver. SetCPU now shows properly.
UV working properly now.Can Be Checked in dmesg.
A 1300MHz freq Step in Extreme Version for those who want 1300MHz overclocking.
Changed Kernel Hz to 300 for Better Battery Backup.
v1.3.4 - 27/7/2011
Overclocking Stable (Less freezes) - To Test
BFQ I/O Scheduler - http://algo.ing.unimo.it/people/paolo/disk_sched/
Extreme Version Screen Off Bug Solved
No OC bus for any versions - (For those who want OC Bus, please use v1.3.0 for the moment. I will try to make OC bus in some better manner)
v1.3.3 - 25/7/2011
5 Touch Mod
Removed RAM Optimization Script
Overclocking Stable (Less freezes) - To Test
Solved Bug which showed wrong freq in SetCPU and PimpMyCPU
Solved Time In State for SetCPU
Extreme Version has OC Bus 200MHz
Downloads
Kernel Downloads:
http://code.google.com/p/g3mod/downloads/list
Steps To Install
Steps To Install Kernel:
1. Download the kernel.
2. Flash using Odin via One-Package
3. Install g3mod app by dympy
Donations
Donations:
Thank You Frank Becker for the donation.
Thank You fuxmen for the donation.
Thank You marcellusbe for the donation.
Thank You kyrillos13 for the donation.
Thank You lovemx93 for the donation(Website - www.g3mod.com).
Thank You Marcin Czado for the donation.
Thank You Sascha Bauer for the donation.
Thank You Orilin(Giuseppe Russo) for the donation.
Thank You Benjamin Lebsanft for the donation.
Thank You Darshak Shah(cool.darshak) for the donation.
Thank You Wim Bogaert(Abelsama) for the donation.
Thank You Harigovind Kaninghat (harkan89) for the donation.
Steps for Different Features
Steps for Multi boot:
1) Flash Kernel v1.7+
2) Go to CWM Recovery -> Multiboot -> Backup ROM.
3) Backup your Current ROM to ROM1 (It will backup the system.img at /sdcard/Android/data/g3mod/romname_ROM )
4) Add the system.img of your 2nd ROM to /sdcard/Android/data/g3mod/romname_ROM and similarly for different ROM's.
5) Use the CWM Recovery -> Multiboot -> Switch ROM option to switch between different ROM's.
Note: Ask the developer of the ROM's to provide you with the system.img for their ROM
System Img's:
G3MOD ROM
Grigora ROM
Kyrillos' ROM
Stylooo AOSP Style
DutchMods ROM
XXJPS Stock Deodexed Rooted System.img.rar
Steps for Changing the Max Freq(Dynamic OC):
There is an entry in /sys/devices/system/cpu/cpu0/cpufreq/plls_table where you can put your own value for APLL.
Before doing this, set "PERFORMANCE" governor on and min and max frequencies to the maximum.
Code:
// Do this in adb
echo "0 a[SIZE="5"][B][U]258[/U][/B][/SIZE]0[SIZE="5"][B][U]3[/U][/B][/SIZE]01 a14d0303 c07e13fc cf850240" > /sys/devices/system/cpu/cpu0/cpufreq/plls_table
You need to replace the 258(Hex Value) with your desired value.
Here 258 means
(2*16*16) + (5*16) + 8 = 600
and 3 means it is 600*2 = 1200
Therefore, a2580301 means 1200MHz.
This is a temporary method. For a permanent Method, add this line to a init.d script. Name the script to something like S10_Dyanmic_OC.
Help Others: If you calculate a Hex Value for a particular frequencies add it here:
https://docs.google.com/spreadsheet/viewform?formkey=dG5hdnpsWFdTNExiY2t3dy16VzBvaWc6MQ
You can view all the frequency Hex value's calculated by others over here:
https://docs.google.com/spreadsheet...G5hdnpsWFdTNExiY2t3dy16VzBvaWc&hl=en_US#gid=0
Check This Out
Kernel Related Media:
5 Touch Support:
BootLogo and Progess Bar
Multi Boot
Old Kernels
g3mod_v1.3.4_LITE.tar (5.9 MB)
http://www.multiupload.com/3BIF9S2IES
g3mod_v1.3.4_LITE.zip (6.1 MB)
http://www.multiupload.com/9IJTKFIJDX
g3mod_v1.3.3_LITE.tar (5.9 MB)
http://www.multiupload.com/DDMMU0U9YB
g3mod_v1.3.3_LITE.zip (6 MB)
http://www.multiupload.com/DW1QZPDQOY
g3mod_v1.3.4_PERFORMANCE.tar (5.9 MB)
http://www.multiupload.com/H53ZTO5ULW
g3mod_v1.3.4_PERFORMANCE.zip (6.1 MB)
http://www.multiupload.com/WWFL3EXH0Y
g3mod_v1.3.3_PERFORMANCE.tar (5.9 MB)
http://www.multiupload.com/Y9CDMFVH61
g3mod_v1.3.3_PERFORMANCE.zip (6 MB)
http://www.multiupload.com/0MQQRR1KV8
g3mod_v1.3.4_ULITMATE.zip (6.1 MB)
http://www.multiupload.com/I4JCH7E5JE
g3mod_v1.3.4_ULTIMATE.tar (5.9 MB)
http://www.multiupload.com/TEQXRZMKPQ
g3mod_v1.3.3_ULITMATE.zip (6 MB)
http://www.multiupload.com/97DV0V4OQC
g3mod_v1.3.3_ULTIMATE.tar (5.9 MB)
http://www.multiupload.com/KV9SSVWWZ7
g3mod_v1.3.4_EXTREME.tar (5.9 MB)
http://www.multiupload.com/EGZKK89JTZ
g3mod_v1.3.2_LITE Odin
g3mod_v1.3.2_LITE CWM
g3mod_v1.3.1_LITE Odin
g3mod_v1.3.1_LITE CWM
g3mod_v1.3.0_LITE Odin
g3mod_v1.3.0_LITE CWM
g3mod_v1.3.2_PERFORMANCE Odin
g3mod_v1.3.2_PERFORMANCE CWM
g3mod_v1.3.1_PERFORMANCE Odin
g3mod_v1.3.1_PERFORMANCE CWM
g3mod_v1.3.0_PERFORMANCE Odin
g3mod_v1.3.0_PERFORMANCE CWM
g3mod_v1.3.2_ULTIMATE Odin
g3mod_v1.3.2_ULTIMATE.zip CWM
g3mod_v1.3.1_ULTIMATE Odin
g3mod_v1.3.1_ULTIMATE CWM
g3mod_v1.3.0_ULTIMATE Odin
g3mod_v1.3.0_ULTIMATE.zip CWM
g3mod_v1.3.2_EXTREME Odin
g3mod_v1.3.2_EXTREME CWM
g3mod_v1.3.1_EXTREME Odin
g3mod_v1.3.1_EXTREME CWM
g3mod_v1.3.0_EXTREME Odin
g3mod_v1.3.0_EXTREME CWM
G3Mod_v1.2.7_LITE
G3Mod_v1.2.7_PERFORMANCE
G3Mod_v1.2.7_ULTIMATE
Init.d Working
Undervolt Working
Lite: Non-OC 667MHz Max
Performance: OC Clock-1330MHz Max Bus-190MHz
Ultimate: OC Clock-1372MHz Max Bus-196MHz
G3Mod_v1.2.3
G3Mod_v1.2.3-Increased Voltage
Bus Overclocked - 200MHz
Overclocking Enabled
Max: 1400MHz
Min: 100MHz
Steps:100,200,300,400,500,600,700,800,900,1000,1100,1200,1300,1400
G3Mod_v1.2.2
Bus Overclocked - 200MHz
Overclocking Enabled
Max: 1000MHz
Min: 100MHz
Steps:100,200,300,400,500,600,700,800,900,1000
G3Mod_v1.2.1
OverClocking Upto 800MHz
G3Mod_v1.1.1
FileSytem Support: rfs,ext2,ext3,ext4(tested working)
Init.d Scripts
Data2SD
No need to convert filesystems to rfs before flashing
G3Mod_v1.0.3
Fixed Sound Click Bug
Updated the battery driver
G3Mod_v1.0.2
adb root and busybox 1.19 Added
G3Mod_v1.0.1
1% Battery Support Added
Convert filesystems to rfs before flashing kernel.
G3Mod_v1.1.0
1% Battery Mod
Root ADB
own busybox 1.19
Fixed Sound Click Bug
Convert filesystems to rfs before flashing kernel.[/QUOTE]
G3Mod_v1.0.0
Stock Froyo Kernel
Source For Developers:
https://github.com/dharamg3
Note:
I am learning how to develop kernels.
I'll add different features as and when i can implement them.
The main goal of this kernel will be to keep the phone stable and fast.
There will be nothing as alpha or beta releases.
I'll give out the kernels directly, but if anything goes wrong and you have to reflash the ROM or kernel, please dont start shouting.
You may give me different ideas on what features to implement. I'll try my best to implement all the features you want
Many of the features implemented in this kernel, are taken from marcellusbe's Fugumod Kernel, and I shall be ever thankful to marcellusbe for the fugumod kernel
Warning:
I am not responsible for any damage caused to your phone (softbrick or hardbrick)
Credits
Credits:
marcellusbe for all his help, awesome fugumod kernel
supercurio for voodoo v10
Paolo for BFQ I/O Scheduler
Stylooo for the different version's banner
All developers for making this an awesome phone
Everyone who is helping is solving different issues with this kernel
Please let me know if i am missing anyone
benzyniarz1 said:
From polish android.com.pl forum:
JaCoL source
It does mean that user has strange problems, for example some problems with Android Market (not specified) and problems with logging in facebook (he can't just do it).
Click to expand...
Click to collapse
Ok...I'll check that...
Anyone else facing this problem??
dharamg3 said:
Ok...I'll check that...
Anyone else facing this problem??
Click to expand...
Click to collapse
adb root and busybox done!!!
Next in line is Filesystem Support
rudolf895 said:
@dharamg3
Would there be a how to/guide on how you did this?
Compiling kernel,modding..etc.?
Click to expand...
Click to collapse
I can do that but the problem is that kernel compiling is easy but modding is difficult.
Even if i post it, there will be a lot of users who dont know stuff, and start complaining about why this is not happening and stuff...
So i would prefer to help but personally not directly on the forums..
So anyone who would like to learn, PM me and i'll guide you as i can
deskjeti said:
It would be great if you could get the permission of marcellusbe to modify the 2.2BE fugumod with 1% battery mod
Click to expand...
Click to collapse
For that i will require marcellusbe's 2.2 source...maybe you should wait for 2.4 bleeding edge...
dharamg3 said:
For that i will require marcellusbe's 2.2 source...maybe you should wait for 2.4 bleeding edge...
Click to expand...
Click to collapse
Guys, Link for G3Mod v1.0.2 is added.
Nice! You're a quick learner!
rudolf895 said:
ok then..
PM it is
Once i know where n how to start i'll mod myself..
Click to expand...
Click to collapse
Its not similar to rom build (framework here, apps in this folder....) its n times harder
Sent from my GT-I5800 using Tapatalk
peldax said:
Its not similar to rom build (framework here, apps in this folder....) its n times harder
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
who said its easy!
Would you give up when things get hard?
I'd learn n share knowledge..
FYI dharamg3 is already helping me via PM..
I didnt give it up! I am working on my own kernel now
Sent from my GT-I5800 using Tapatalk
chill anyway i see that first everybody was making custom ROMs but now everybody is making kernels idk if i should even make one when there will be so many kernels i quess when everybody are tired of making kernels then everybody will start develope apps, evolution but this was a bit off-topic
[Kernel][GB][OC/UV][HDMI-MHL] !NEW! Synthesis Kernels <2013-04-30>, plus Infusion-Z
Please post only bugs and testing results on this thread. For general questions and answers visit ---> Infusion-Z and Zen kernel Q&A
*** Synthesis: The only GB kernel you need for your Infuse ***
New features
This set of kernels is a combination of the stock UCLB3 kernel, with all mods from the Infusion-Z kernel (see below), some mods from Entropy's DD, and more. New features include:
- Fix for the wifi drain bug (aka bt-amp bug). In the event that this bug occurs, the kernel triggers a reset of the wifi interface, which stops the bug and saves battery.
- Wifi roaming code from the international SGS2 (roam_api) replacing the stock bcmccx logic. Reduces the incidence of the wifi drain bug. This config is less agressive in seeking out new access points, so you may need to open the wifi config screen in settings to speed up the connection process.
- External SD card (/sdcard/external_sd) is now available in CWM recovery and can be used as a source to flash CWM zip packages
- Entropy512's fast charging hack is included (thanks!)
- SIO and BFQ I/O schedulers added from Entropy's DD (thanks!)
- Voodoo lagfix lady 2.0 :good::good:
- Kernels are attached to this post (CWM flashables) including stock CPU frequencies - 1.2Ghz - and two OC options - 1.4Ghz and 1.6Ghz. If you prefer to flash them using SGS Kernel Flasher, you can download a bundle containing all three >>here<<
-------------------------------------------------------------------------
- Overclocking and Undervolt support - thanks to bedwa's prior work
- CoreA cpu speeds - 1600, 1200, 800, 400, 200, 100
- CoreB cpu speeds - 1400, 1000, 800, 400, 200, 100
- Voodoo sound driver, voodoo lagfix - courtesy of project voodoo
+ [cifs support] see post #29 for info on how to use cifs
+ [Removed auto-install of superuser] you can get the current su cwm flashable here: http://androidsu.com/superuser/
+ [HDMI/MHL support] using mhl adapter you can play video on most TVs and monitors with a HDMI port
+ [Video support] newer roms no longer need video reverts to allow video to record or playback
+ [External sdcard fix] corrected issue which prevented external sdcard access in some cases
+ [cfq i/o scheduler tweaks] added optimization tweaks for cfq scheduler
+ [Boot animation fix - partial] this is a work in progress - see notes below
NOTES:
Intended for use *ONLY* with stock-based GB ROMs. For CM7, CM9, and CM10 check project OPs for proper setups.
OC/UV requires use of an app like Voltage Control, CPU master, or SetCPU. Read up before jumping in - you can lock or damage your phone with incorrect settings. Remember to save your boot settings in Voltage Control menu to ensure your settings stick.
To get boot animations to show correctly: In /system/media copy sanim.zip to bootanimation.zip. I plan to automate this in a future release.For tips on overclocking and related performance and battery tweaks see the q&a thread.
Important! - Video restore and revert packages are intended only for users of current ROMs with stock library files who have previously applied a revert package to get video to work. If you haven't done this, or are unsure, flash only the kernel package of your choice.
Links to install packages for the first release can be found on post #3.
Source code is available on my github (see signature).
Be safe and always make a backup before flashing!Standard Disclaimer: All packaged builds are provided with no guarantees as to their safety. By flashing, you assume any and all potential risks that running a custom kernel might entail.
Recommendations: Wipe cache and dalvik-cache when flashing a new kernel. Disable any oc/uv settings from phone before flashing a new kernel.
Overclockers/Undervolters: If your phone is unstable when running at a particular overclock speed, choose a lower max cpu speed - not all phones have the same ability to handle oc speeds. When undervolting, do your research first and make small changes.
Big thanks to those who helped test this and prior kernels: qkster, mikig_mkd, boogman7, scott.hart.bti, aeonit, mikig_mkd, nwinfuse, texcowboy, tankmorph, prairied0gg, madman_sle, cmeyal, atk, and jdt352 Thanks to bedwa, entropy512, linuxbozo, and netarchy who laid the foundation (and built the house) - especially bedwa and entropy for helping me out along the way. Visit their threads and say thanks:infusion kernel development by bedwa --> infusion kernels
daily driver kernel development by entropy512 --> entropy daily driver
Remember the multicians - http://www.multicians.org/ (if you know, you know.. If you don't, you should)
Click to expand...
Click to collapse
.•...•.•.••.••.•.••....•.••.•••..••...••.••.•..•.• ••.....••....•.•••.•...••..•.•..•......••••..•.••. ••••.•••.•.•.•••..•..•••..••.••..•.•.••.••...••..• •...•......••..••..•••..•..••.••••.••.••.•..•..... .••.••.•.••..•.•.••.•••..•••.•...••....•.••.••.... •......•••..••.••.••...••....•.•••.••..••..•.•.••• ..•..••••..•..•.••....•......••.•••..••.••••.••.•• •..••..•.•..•......••...•..•••.•.•.•••.•....•..... .••.••••.•••.•.•.•••..•..•••..••.••..•.•.••.••...• ••.••..••..•.•.•••..••..•......••...••.••....•.••. •••...•......••..••..•••..•..••..•.•.••..•.•..•... ...••.••••.•••.•.•.•••..•...•......••.••.•.••.•..• .••.•••..••..•..
Change, Issue, and Enhancement Logs
Change log
2013.04.30 - UCLB3+Infusion+DD, Fix wifi battery drain bug, Change wifi roaming code to sgs2 roam_api, Add support for /sdcard/external_sd from CWM recovery, Add Entropy's fast charging hack, Add BFQ and SIO schedulers from Entropy's DD, Upgrade voodoo lagfix voices.
2012.05.20 - Add HDMI/MHL support (for external video playback), add video support for current ROM firmware (UCLB3/UCKL2 - No more need for Video Fix!), add correct vold.fstab definitions for currrent firmware (mounts external sdcard correctly), initial bootanimation fix (not 100% - need to copy "sanim.zip" to "bootanimation.zip" in /system/media in some cases), add CFQ I/O scheduler tweaks (better performance)
2012.05.05 - Add cifs support, remove auto install of Superuser, change initramfs compression to lzma, add video lib mod option packages for vidcam rec/play
Click to expand...
Click to collapse
Known Issue log
- Flashlight function disabled in quick panel after use of video record or playback (restored by taking a flash photo, turning on flash using "Tiny Flashlight" app, or reboot)
- Some reports of random screen color change after disconnecting charger (restored by lock/unlock or reboot aka "faerie snot") [Fixed with the UCLB3 base - 4/30/13]
- Some reports of racing CPU on ROMs with tweaks [Racing CPU issues appear to be caused by modifying "ro.ril.xxxxx" cellular radio settings in build.prop. To fix, remove those tweaks (referencing a standard UCLB3 build.prop), or flash a near stock rom like r.e.v.e.n.a.n.t ]
Click to expand...
Click to collapse
Planned enhancements
- Improve auto-detect of boot animation files?
- Add support for BLN Lights?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
•.•.••..•.•.•••••.••....•.••....•.••...•••.••••.
Information and Prior Release Mirrors
reference materials
governor, i/o scheduler, & tuning info
Click to expand...
Click to collapse
prior release mirrors
2012.05.05 - initial "z" kernel release (mirror)
cwm-infusion-gb-z-corea2-videofix.zip
cwm-infusion-gb-z-corea2.zip
cwm-infusion-gb-z-coreb2-videofix.zip
cwm-infusion-gb-z-coreb2.zip
cwm-uclb3-videolib-revert.zip
big thanks to those who helped test this release: Qkster, ppalbicke, bigfau, and aeonit
Click to expand...
Click to collapse
Click to expand...
Click to collapse
.••...•..••..•.•.•••.•••.••....•.•••..•..••..•.•..•......•••.•...••.•....•••..•..••....•.••.•.••.••.•.••.••.••••.•••..•..••••.•..••.••••.••..•••..•....•
Nice, bro. First.
edit: Alright. Now that I got the 1st post after op claimed, I will add some more relevant info.
Nice work, Zen. I know you've been putting a lot of time into this.
Let me be the first to say thank you.
I hope this will be the first of several new additions.
Kernel development is a task onto itself.
Kernel devs are a rare breed indeed.
Thank you for taking the time to give us some options.
Now we have the options of OC and retained some video capacity, even though we are using older libs.
Can't want to see what you can do. It will be a beautiful moment to see a stable OC with MHL fix.
Awesome work, bro.
edit: 6.5.2012: Well..MHL works. OC works.
Can you make me look cool so the hot chicks will dig me?
really nice job, zen, keep it up
Outstanding Zen thanks for all the hard work. :thumbup:
Sent from my SAMSUNG-SGH-I997 using xda premium
Thanks Zen for your work :thumbup:
Thx for your work in keeping it going, in the developing for our community.
Fantastical!
Sent from my SAMSUNG-SGH-I997 using xda premium
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
brclho said:
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
Click to expand...
Click to collapse
yup..that's the idea. You get to retain the lastest SU that you have installed.
Thanks all! I'm looking forward to seeing what more can be done with this kernel.
brclho said:
if i flash GBZ-A2 and the lib files for emancipation, everything should be nice n cherry without superuser going back on me?
Click to expand...
Click to collapse
The packages with the video fix include the same files as with eman. You should only have to flash the kernel+video package in the OP.
Ni e work on kernel :thumbup:
Sent from my SAMSUNG-SGH-I997 using xda premium
Flashed the CWM-Infusion-GB-Z-CoreA2-VideoFix.zip on the ROM Emancipation A:I.
Wiped dalvik and cache.
Rebooted.
Video works great!
Bluetooth turned on, gotta connect to my car tomorrow and test it out.
WiFi connected right away.
Great work guys!!!
CIFS at LAST!!!
A couple quick questions:
I just updated to the Emancipation A1 ROM - please list me the exact steps to install this Kernel. (A bit confused with the revert and video-fix stuff)
bsw11 said:
CIFS at LAST!!!
A couple quick questions:
I just updated to the Emancipation A1 ROM - please list me the exact steps to install this Kernel. (A bit confused with the revert and video-fix stuff)
Click to expand...
Click to collapse
Steps are literally on every help thread.
1. Copy the zip "CWM-Infusion-GB-Z-CoreA2-VideoFix.zip" to internal SD
2. Boot into CWM
3. Select install zip from sd card, and select select the zip you downloaded.
Thank you Zen for your hard work. This is essentially what GPL and git is about. Thank you to everyone else for your patience as well.
My Tab makes calls Yo! GT-P6800
Very awesome... Cant wait to see the upcoming progress with this kernel. Thank you!
Just wanted to point out that on emancipation, my benchmarks skyrocketed using this kernel.
some strange dark magic going on in my phone now...
Hello Guys.
Little History
I have the Milestone 2 about a year, and the User in xda for 2 days.
I Do like The CyanogenMod 10 and the JB AOKP but since they dont support fully HWA and 720p Rec i sticked to the MS2Ginger GB Rom, also games are slower , benchmarks lower , and with all the beauty of Cyanogen , something lacks there for people who want to squeeze the milestone 2, beacuse the only reason I sticked to GB is P-e-r-f-o-r-m-a-n-c-e!
The rom itself is fine but I wanted it to perform as fast as the Phone can.
Then , I Just Modified and upgraded it more and more, until it was too good to be not published here.
so , after 4 monthes of Customizations and , Moddings and Upgrades I Must Share this awesome rom.
<also Overclocked it the highest possible - over the whole internet couldnt find people who could push that far , but that's off topic)
So What happened to This Awesome rom since I Have it :
- CM Integrations for Android 2.3.7 <Kernel can be even 2.3.6 \ 2.3.4 thats OK>
- The Most usable feature for me is 720p Record on 30fps , using the stock version of Gingerbread does give the 720p but it's too laggy, so I used new M4V Encoders + 10Mbit (Better Quality , surprisingly didn't decreased FPS) + new Stills driver (related to video record because in the ms2g stock and in every BLUR rom it looks for the exposure in the stills camera .so files = In Short , Video is Smooth on 720p @30 FPS as it should be , and as it is written in GSMArena.
- New cool Theme <Look at pics> , New Bootanimation, Transformed from CoreDroid Theme pack.
- DSPManager with Custom libs , Ok , this is one of the better things that happened to the phone , dsp libs are now supporting 10hz Low Bass instead of 16hz (but 16 hz is still shown in app.) , Furthermore , neccessary for In-Ear users LPF Compensation fixed and the bass is tremondous <using good earphones of course>.
- OpenGL TextuereBulldoze libs included <can perform better with ChainFire>, useful due to the weak GPU power so it pushes the SGX 530 chip as further as possible.
- I/O Calculator libs Ported from Droid 2 Global - also gives some more performance.
- YouTube HD Version , yes,the new YouTube that was meant to be ICS / JB only is here (Version 4.1.23) , the older version supported HD but it cached really bad so it buffered alot , now it works better ( little buffer on 27 fps hd clips , but 24~25 fps hd clips are cached now easily using fast WiFI of course).
In Coclusion ,the ROM is Super in terms of performance and reliabilty, easily compensates for not having CM9\CM10\AOKP Roms.
Note: I Used a Customized Kernel which gives 1450mhz core clock (Compiled with Linaro 4.6) , although it is faster , it isnt very stable for daily use and has limitations like battery 0% or Full signal but its not all the time , anyways , I attached the latest boot image so you can use 2.3.6 latest kernel.
Note 2: I Recommend Using Latest GB Kernel and so i will attach it.
Enjoy
Installation Guide for n00bs
1. Place the Folder in /sdcard/clockworkmod/backup <it's currently as Nandroid Backup , will be a ZIP as soon as i fix my custom kernel , beacuse I couldn't check the zip , Im pretty stuck on CWM 6 with this kernel.>
2. Boot to CWM based Recovery.
3. Restore the ROM.
4. Reboot , boot again to CWM but this time it'll be the new CWM 4 recovery from my rom! for a better allocation of /data (uses different mmcblk)
5. Now Wipe Data & Cache.
6. Enoy The ROM ,Hope you'll like it!.
------------------------------------------------
-------- MS2Ginger 5 *NEW* ----------
------------------------------------------------
Download Section
09.06 - Download *NEW VERSION*
04.04 - Download
Read Changelog for full info
-----------------------------------------------
------------ Earlier Versions -----------
-----------------------------------------------
-NEW- Link for MS2G4 v2-
Download
New version , Linaro 4.7.2 code , should be faster.
-Link for 28.10 Version <A.k.a MS2G4 v1>
http://www.mediafire.com/?v55cosbkd5hfw7o -
-Latest GB Kernel-
http://www.mediafire.com/?get bt49a8pr6u3wbvu
-Stock Animation & Theme-
https://dl.dropbox.com/u/96160245/Stock%20theme_4MS2G.zip
-------------------------------------
Instructions For People who want to try Stock Animations & Theme flashable:
As requested , flashable for stock anims and theme.
1.Flash Zip
2.Wipe Dalvik Cache
3.Reboot <Now reboot will initially take longer to rebuild cache>
4.Tell me how it goes
ChangeLog:
------------------------------------
Earlier Versions <MS2G4>
------------------------------------
11.10 - Boot Up
15.10 - Update Libs for usage on stock animation zip.
17.10 - Fix WiFi Channel 10 on 802.11g/n < Led to crash when trying to Ad-Hoc>
21.10 - Integrated RTL to Framework.
28.10 - Better Data Tethering speed <useful for some people who tether to use on a laptop>
07.11 - New ROM Improvements ,Faster I/O & Scheduler, Also Integrated SuperCharger v6 , Kick Ass Kernelizer for SIO and 3G SuperCharger.
08.11 - Full Support for Animations and other custom boot related stuff <possible due to removing CRC check from bootmenu>
11.11 - Faster OpenGL using updated glibs <average 3.1 FPS more>
17.11 - Final Wi-Fi fix <after lots of QC tests>
20.11 - Media Player fully integrated in Lockscreen, Finished Kernelizer improvements,NO thumbnail on gallery Fixed,STABLITY CHECK PASS.
27.11 - Camera app free focus , Fix navigate freely in UI while call is incoming <Without answering the call > , New,updated glibs <Defy+ port>.
06.12 - New bins for EGL ans SLES , new adb debug system < using adbd in CWM , for those who needed.>
13.12 - New Mass Storage Drivers , ROM now supporting UV using the new kernel only <better OC score>.
23.12 - Final fix of GLES <FINAL fix , the SGX530 can't do better than that!> , UVP<version needs the new kernel to OC - it relies on the UV>
01.01 - New VSEL Calc from Droid 2 <max undervolting of VSEL1 without call hangout on deep sleep>, JVM cache is 64mb instead of 16mb.
16.01 - ULV of new kernel supported fixed libs ,Linaro GCC tweaked <checks whether Custom kernel is installed or not , RAM economic>
25.01 - New calculator , even better than required stock , If I already messed with the I/O then let's use DROID X one for a test.
31.01 - Newest Camera stutter libs , DROID X new revision <should be better in CPU initializer like when you launch an app>
14.02 - Fixed Major issue caused severe lags using entropy change , Made some changes in KAK that caused minor issues and fixed batt.d.
21.02 - EntropyService feed extended on /dev/block/kpanic @ 8192.
09.03 - RAZR Camcorder lib for better Exposure and futuristic kernel updates. Added bootstrapper.sh partition master for faster boot on BL 3\4.
21.03 - Recovery repartition and bootloader verification killed - NEED IT ONLY FOR CWM6
--------------------------------
MS2G5 - New Versions
--------------------------------
25.03 - Recompiled Version using the new GCC 4.8.0 , supports the latest custom kernel , 2nd-init version , compiler fixed BL 4 issues , future DWARF debugging , SmartAss2 experimental.
04.04 - New WiFi drivers for request , LTO Partitioning , Integrated ASan Tweaks for startup libs <read : Address Sanitizer> - BIG Thanks for GCC Team!
09.06 - ROM built from completely new, untouched Vivo Brasil - True MS2 fingerprints and kernel stamps , new YouTube HD , ASan Tweaks for GCC and sync to 4.8.1, Better scrolling <framework edit> , Fixed backlight , Fixed HW codec for built-in video player not showing 720p MP4 with more than 10Mbit
along with all previous tweaks made for MS2Ginger , works with all recoveries, wiped some not necessary system apps , new soundfx libs corrected loudness compensation and sound quality when using custom EQ on low hz - ROM is slim and nice.
Please Note: Flash using CWM 5 for fully supporting TAR <had some improvements on YAFFS image , not relevant anymore>
Link for BootMenu with CWM5 : http://www.mediafire.com/?i1rcie7tf4y6rmu
---
Click to expand...
Click to collapse
------------------------------------
----- Custom Kernel Section-----
AUTHORIZED PERSONNEL ONLY! DO NOT CROSS
--Based on Stock 2.3.6 Nov11--
8.1 - New Kernel with Alot more Features:
- Custom UVP
- Extremely ULV on 300/11~15 - Battery BEST Friend , But depends on how good your piece is.
- New Deep Sleep Tweak from G71 <unlike previous release , now supports Wi-Fi , Data and Bluetooth services kill on sleep>
- Dalvik cache split file <Acts like Page File when RAM is less than 15% available>
- zRAM Swap 24% <pre-applied>
- USB Debug root access <good for ADB users>
- 70.13 Bootloader Semi Unlocked.
- Kernel Image is zImage OR BootINI with CRC check disabled with IF condition - if it can't boot , the condition will continue to BootINI.
- VSEL3 for Short Initial Demand tweaked if used in 800mhz you can now get below 800/44 <Experiment on Voltage multimeter>
Link : http://www.mediafire.com/?hdv8c3a2fhj5brr
---
07.02 - Linaro based , Whole new kernel <Rev4>:
- ULV as always.
- New CPU 4th HW level <as known as VSEL4> , only when processor reaches 75% of intensity.
- ARM topology support (SCHED_MC)
- Stable 5 Point multi touch drivers.
- Multi hub , supporting any GB.
- 100% stock kernel info fake!! <install using sbf must proceed>.
- New Modem driver for MS2 <can use data tethering via USB built in func.>
- Customized Display Driver <can use up to 9999 dpi hack, upscale 1080p videos and game higher resolutions NOT ALWAYS WORKING >.
- GPU Undervolt NOT STABLE FOR ANYONE ,use terminal emulator with su permissions and use "set min_lv_gpu 97280 /dev/block/stl1".
- Lossless Kernel Image for fast decompressing.
- New Data partition <mmcblk shortcut for original location> , after DATA wipe , new partition will be active.
- NO COMPILER OPTIMIZATIONS , I Just used linaro for its ability to navigate easily on 15 different hardware C++ files.
Link : http://www.mediafire.com/?cn3b1z76fk59bqk
---
16.04 - New stuffed kernel! <Rev5>
- Added VSEL1 Custom code** for better battery <read info>.
- Added ril on ramdisk so any older GB based roms have baseband supported <CM7 , MIUI GB , and also CM9 runs on GB>.
- Changed to gZip compression for ramdisk , had Loseless on previous release but it caused Code Corrupt if using BL 4.
- Fix BL =4 users updating cdt.bin after flash. <This is for me ,not really important , just a fake signature>
- 1400Mhz Core limitation on this release <want to make sure people don't destroy their device>.
- Added NTFS Module UPDATE 18/04 - Unstable , use ext3/4.
Link : http://www.mediafire.com/?ihvdwmfwd89pljv - Fixed
---
16.05 - New Revision! <Rev6>.
- New ril from vivo brasil , fixing MMS and BT Mac address 00;00;00;00 for BL=4
- Kernel running JIT enabled , experimental.
- Kernel is BL =4 , which means if you're BL 3 and want to keep it on 3 , flash UpgradePreventer before the kernel.
Link : http://www.mediafire.com/?116s024d2k76mjx
-------------------
**Custom code for voltage management on VSEL1 : when in Deep Sleep for more than 10 minutes device goes 150/6 , VSEL1 backs to normal 300Mhz <unless configured differently> before screen lights up or a call ringing.
Click to expand...
Click to collapse
Credits:
walther79 for initial MS2Ginger! , for MS2Ginger 5 which he called for 2nd-boot , I recompiled it and use for normal mode as for the custom HW kernel, the 5th version is similar to 4 , but I brand it as No. 5 for new GCC 4.8.0 of March 2013.
santiemanuel for CWM 4 <new recovery , although i use cwm6 , it is more stable to use version 4 for its great compatibilty>
Nice work! Welcome to the club!
Megalith27 said:
Nice work! Welcome to the club!
Click to expand...
Click to collapse
Thank you!
by the way, I LOVE your port to AOKP
Keep it up!!
-Danik- said:
Thank you!
by the way, I LOVE your port to AOKP
Keep it up!!
Click to expand...
Click to collapse
Thanks, i'll have to see what I can adopt from your rom to make some improvements on AOKP
Megalith27 said:
Thanks, i'll have to see what I can adopt from your rom to make some improvements on AOKP
Click to expand...
Click to collapse
I'll be glad
I tried to integrate the boosted OpenGL libs and the 720p rec into ICS and JB but it just won't boot for no reason.
I've tried adb debugging - but nothing , it showed error in syntax and rebooted again and again.
the OpenGL libs succeeded being ported to JB but when clicking the "Performance" tab , the Settings.apk immediately crash , I know it's related to the hash code checking of CM10 because it worked like a charm in MIUI.
Great work!
But I really wonder what is the vsel setting for 1450MHz?
Since I tried my phone can be overclocked to at most ~1330MHz at 80vsel:crying:
KinChungE said:
Great work!
But I really wonder what is the vsel setting for 1450MHz?
Since I tried my phone can be overclocked to at most ~1330MHz at 80vsel:crying:
Click to expand...
Click to collapse
I can tell that there isn't much difference between 1330/1350 to 1450 , the big problem isn't the Vsel , it's just locked.
somehow I got a good piece , that can get above 1400mhz , with custom kernel.
it wasn't meant to be used daily though.
EDIT: Try 1350 mhz on 74 vsel , it should be stable . Run Stability Test for 5-10 minutes
here is Market link to the app
https://play.google.com/store/apps/details?id=com.into.stability
Hi interesting rom,
and what about battery life compare to stock GB roms?
rafffel said:
Hi interesting rom,
and what about battery life compare to stock GB roms?
Click to expand...
Click to collapse
Depends on your core clock , but if comparing to stock gb , of course this rom is power efficient because of using better scheduler.
Nice rom mod. Will give it a try on my defy with some changes.
Nice! Have you tried adding droid x governors from the forum?
And what about using v6 supercharger? Lets see if we can squeeze more power!
Sent from my MotoA953 using xda app-developers app
Good to see MSginger return, one of my favorites.
Good job.
It looks nice and I will probably give it a try!
Just quick questions - how is the speed compared to CM10 and CM7 and to stock ROM?
(I suppose it is way faster than CM10, faster than stock ROM - Am I right?... but how about a comparsion to CM7... is it faster than CM7 or about the same or the CM7 is noticeable faster? Thank you very much for response on this! I'm currently looking for the fastest ROM on M2 and I have definitely eliminated CM10, MIUI and stock Froyo ROM... Currently looking around CM7, this ROM and stock GB)
Thank you for your work!
You should probably add to your "noob guide" that you can only reboot into your custom recovery by pressing "Volume Down" when the blue hardware led appears at the upper right edge of the screen.
chippoke said:
Thank you for your work!
You should probably add to your "noob guide" that you can only reboot into your custom recovery by pressing "Volume Down" when the blue hardware led appears at the upper right edge of the screen.
Click to expand...
Click to collapse
Yes , and one more important thing - it will show a blue led but not the green led because it is set to 'normal' instead of '2nd-init'
Anonymous_ said:
It looks nice and I will probably give it a try!
Just quick questions - how is the speed compared to CM10 and CM7 and to stock ROM?
(I suppose it is way faster than CM10, faster than stock ROM - Am I right?... but how about a comparsion to CM7... is it faster than CM7 or about the same or the CM7 is noticeable faster? Thank you very much for response on this! I'm currently looking for the fastest ROM on M2 and I have definitely eliminated CM10, MIUI and stock Froyo ROM... Currently looking around CM7, this ROM and stock GB)
Click to expand...
Click to collapse
Speed must be greater due to full HW Acceleration , that means even faster phone on 3D apps. , about CM7 , it should be the same on I\ O but greater at some CPU massive apps.
morcego.surf said:
Good to see MSginger return, one of my favorites.
Good job.
Click to expand...
Click to collapse
Yes , hope you will like it , thanks.
eduwp90 said:
Nice! Have you tried adding droid x governors from the forum?
And what about using v6 supercharger? Lets see if we can squeeze more power!
Sent from my MotoA953 using xda app-developers app
Click to expand...
Click to collapse
I really wanted to use V6 supercharger script and the Kick Ass Kernelizer , surprisingly performance dropped both on Multi tasking method and on Aggresive 512HP thats because it overwrites some of my parameters that were already boosted better.
and for the Droid X mod , of course i put it in , but only the SIO Scheduler works <boostedASS v2 crashed>.
-Danik- said:
I can tell that there isn't much difference between 1330/1350 to 1450 , the big problem isn't the Vsel , it's just locked.
somehow I got a good piece , that can get above 1400mhz , with custom kernel.
it wasn't meant to be used daily though.
EDIT: Try 1350 mhz on 74 vsel , it should be stable . Run Stability Test for 5-10 minutes
here is Market link to the app
https://play.google.com/store/apps/details?id=com.into.stability
Click to expand...
Click to collapse
related to kernel? Seems moto did a lot of trick to prevent us optimizing the phone
May I know if the kernel is the same as the CM10 one? (below is the link)
http://forum.xda-developers.com/showthread.php?t=1908687
Thank you!
KinChungE said:
related to kernel? Seems moto did a lot of trick to prevent us optimizing the phone
May I know if the kernel is the same as the CM10 one? (below is the link)
http://forum.xda-developers.com/showthread.php?t=1908687
Thank you!
Click to expand...
Click to collapse
No , i didn't check the CM10 kernel yet (becuase I can't boot the rom with it , however it is related to quality of the phone itself <I got a good one>
the limitation is in Voltage.
above 80 Vsel your phone will bootloop , literally
the phone somehow gets me get a really high core clock while keeping Vsel < 80.
I know that with stock kernel It will not suffice (80 Vsel for 1450mhz) so i'll have to push the vsel higher and then i'll bootloop , so that my assume it is pretty related.
try your luck with that .
please note that when the Bootloader will be unlocked , limitation will be only the core's <don't really know how much , but rumor has it that the single core TI OMAP can reach 1.7ghz , can't imagine how the battery will be..
Please ignore, I managed to fix it. The problem was with Windows 7.
Just trying the ROM and some observation:
- it's pretty fast (in compare to CM10)
- some keyboard layout switching (for HW keyboard) would be nice... I'm going to resolve this manually via adb.. but it's annoying
- what's bothering me at this moment is that I'm unable to lower the ringtone volume down to the total mute - it just stays on vibrate... I'm unable to go to total mute (without vibrate)..
Any help would be nice.
Just for other people, who are wondering to try it - it has about 200 MB of free RAM without apps running and it installed without any problem through restore and wipe data.
Anonymous_ said:
Just trying the ROM and some observation:
- it's pretty fast (in compare to CM10)
- some keyboard layout switching (for HW keyboard) would be nice... I'm going to resolve this manually via adb.. but it's annoying
- what's bothering me at this moment is that I'm unable to lower the ringtone volume down to the total mute - it just stays on vibrate... I'm unable to go to total mute (without vibrate)..
Any help would be nice.
Just for other people, who are wondering to try it - it has about 200 MB of free RAM without apps running and it installed without any problem through restore and wipe data.
Click to expand...
Click to collapse
of course I try to get it as fast as possible with many tweaks and configures.
about ringtone it locks on Vibrate mode for comfort , you have a button in quick action ui < where WiFi , BT , GPS and all> also you can slide the right slider in Lockscreen.
also Music player integrated to lockscreen.
BTW. RAM freeup is set to low intensity for better multitask , while handling large Dalvik Heap , that's great.
Thanks
[KERNEL][OC][STOCK/CROMI] JB 4.2.1 ★ Hundsbuah ★ 10.6.1.14.10 ★ v3.4.0 ★ BETA v3.4.4
1Thanks to: _that, sbdags, steveman29 and all testers out here
If you like my work you can donate by clicking the link below:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BGD8ETXAPXNEQ
Please tell me your xda nickname in the donation!
Donators: steveman29, bads3ctor, Douglas Wing, pastorbob62, Yamir Gonzalez, ziggy71, sbdags, Mackis, Daruniafx, MotoFlasher, tijsva, JoinTheRealms, faustus1005, ubefuct, LetMeKnow
IMPORTANT:
Please always try to undervolt the CPU as much as you can/as its running stable! Less VCORE, less heat, more batterylife!
If you get reboots and/or cpu gov scaling errors, you have undervolted too much!
PLL Calculation Excel:
I have also made a cpu pll calculation excel sheet. there you can calculate your correct M,N values for a specific freq
Download here: http://www29.zippyshare.com/v/35204606/file.html
Printout hexdumps from edp.c:
I also wrote a small c-programm to print out the content of the edp hex-dump.
just copy the hex values from your edp.c in edplimits.c. look in the file and you know how to.
Its an eclipse project.
The output is a file called: edp_entrys.txt
Check out your speedo_id and regulator id and search for it in the .txt file
Download here: http://www58.zippyshare.com/v/40584147/file.html
Source:
Kernel:
https://github.com/Hundsbuah/tf700t_10_6_1_14_4
MyApp:
https://github.com/Hundsbuah/HundsbuahsKernelTweaks
If you dont make any changes to my kernel here my recommendation:
- Use asus batterysaver for (as the name sais: powersaving)
- use asus balanced mode for gaming or heavy loaded apps (this is not oc too much so it wont burn ur hand away)
- use asus normal/performance mode for daily use (surfing, browsing apps, just the normal daily use (except gaming!!)
- if you have our own frequency setting, i recommend for gaming: 1600MHz CPU Quadcore max. and 600MHz GPU max
Need help - Still something unclear?: THX lucius.zen
http://forum.xda-developers.com/showthread.php?t=2232715
Android App for my Kernel:
v2.3
Code:
- init.d file will be created if it not exists before my app is using it (initd error messages should be gone now )
- fixed bug that causes a force close in the cpu uv section when trying to change cpu voltages
[URL]http://d-h.st/fEm[/URL]
v2.4
Code:
- added boot to linux tab (you need the latest beta kernel!! and you need to flash the linux installer zip)
[URL]http://d-h.st/Y3T[/URL]
Linux Installer (needed by my App):
v1.0
Code:
[URL]http://d-h.st/GBy[/URL]
BETA RELEASES JB4.2:
v3.4.1
Code:
- kexec hardboot support
- dynamic fsync added
[URL]http://d-h.st/7jX[/URL]
New app v2.4:
- added boot to linux tab (you need the latest beta kernel!!)
[URL]http://d-h.st/Y3T[/URL]
What do i have to do when i want to boot to linux from your Hundsbuah App?
- Just download this linux installer zip, flash it in recovery and be sure that you are on the latest beta kernel (v3.4.1 from 2013-10-29)
- You can install Linux as a virtual image and use all the default settings during installation!
[URL]http://d-h.st/GBy[/URL]
v3.4.2
Code:
- added a lot of tcp congestions
[URL="http://d-h.st/bXd"] http://d-h.st/bXd[/URL]
v3.4.3
Code:
- added bfq io scheduler
- added sio io scheduler
[URL]http://d-h.st/ACY[/URL]
v3.4.4
Code:
- Removed frequencies from the frequency table: 1.28 Ghz, 1.33 Ghz, 1.37 Gh, 1.54 Ghz
[URL]http://d-h.st/ILo[/URL]
STABLE RELEASES JB4.2:
v3.4.0
Code:
normal+data2sd
(this is kernel is for both versions, normal and data2sd - if you dont install the data2sd patch from below it is working as normal "non data2sd version")
[URL]http://d-h.st/hyD[/URL]
data2sd patch:
Code:
just format the 2nd partition of ur sdcard with ext2 or ext4 and set the 2nd partition as active or boot
install this patch: [URL]http://d-h.st/xbU[/URL]
and use the normal+data2sd kernel from above
big thanks to _that!
Bugs:
- you tell me
Please report any problems / feedback
Will have a quick play today
---------- Post added at 09:56 AM ---------- Previous post was at 09:44 AM ----------
OK first problem this causes DSP manager to continually force close. On CROMI 3.2.2 deodex
---------- Post added at 10:18 AM ---------- Previous post was at 09:56 AM ----------
OK more issues to report I'm afraid. Went into system tuner. Default governor was set to conservative. Changed it to pegasusq and system tuner froze. Then went to the market to update some apps, started downloading and tab rebooted on its own. Had another reboot when it finished loading.
Back to _that 2 kernel and all OK again. This kernel needs a bit more testing mate. Let me know if you need some help.
Hi Hundsbuah,
I'm testing out your latest kernel and found many options for cpu govenor and scheduler. Is it possible you could provide a quick summary for them, so I have an idea how to test and the combo I should be using. Thanks
Govenor:
brazukkabwax
oegasysq
Smartassv2
lulzactive
Schedule:
sio
row
vr
Thanks again.
Re: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
buhohitr said:
Hi Hundsbuah,
I'm testing out your latest kernel and found many options for cpu govenor and scheduler. Is it possible you could provide a quick summary for them, so I have an idea how to test and the combo I should be using. Thanks
Govenor:
brazukkabwax
oegasysq
Smartassv2
lulzactive
Schedule:
sio
row
vr
Thanks again.
Click to expand...
Click to collapse
Learn to search there are multiple threads here on xda that give detailed descriptions of governors, io schedulers, and even tcp congestion algorithms.
ejhart said:
Learn to search there are multiple threads here on xda that give detailed descriptions of governors, io schedulers, and even tcp congestion algorithms.
Click to expand...
Click to collapse
I think it's good to keep all here in this thread. I don't want "technical" details,but a simple common sense for common users. For example:
SmartassV2 - For heavy multi-task users but still save on battery.
Got my point?
buhohitr said:
I think it's good to keep all here in this thread. I don't want "technical" details,but a simple common sense for common users. For example:
SmartassV2 - For heavy multi-task users but still save on battery.
Got my point?
Click to expand...
Click to collapse
i havent tested much atm because i dont have as much time as i wish and my free time is testing new kernel features/versions. but pegasusq and row/vr should run great with also good battery.
brazilianwax is a more aggressiv smartassv2 version.
here are some gov explained:
http://www.alliance-rom.com/community/wiki/governors-explained/
Hundsbuah said:
i havent tested much atm because i dont have as much time as i wish and my free time is testing new kernel features/versions. but pegasusq and row/vr should run great with also good battery.
brazilianwax is a more aggressiv smartassv2 version.
here are some gov explained:
http://www.alliance-rom.com/community/wiki/governors-explained/
Click to expand...
Click to collapse
OK, thanks, I can do the testing myself, not a problem.
I like this thread with explanations, although it is technical in nature:
http://forum.xda-developers.com/showthread.php?t=1369817
And with a search I stumbled onto this one:
http://forum.xda-developers.com/showthread.php?t=1631894
which I have to read myself as well. On first glace much information seems copypasta'd, but hey, you never know.
Hundsbuah,
Thank you for the new update, I have a favor to ask, is it possbile you can make a data2sd version of this kernel? I'm runing data2sd and it's definitely smoother than the regular, I would like to keep the data2sd andn try out with your kernel. I already tried your kernel version 1.2 and it's pretty smooth.
buhohitr said:
... a data2sd version of this kernel?
Click to expand...
Click to collapse
+1
Please incorporate d2sd versions into your releases , at least major updates.
So many TF700 users are now using this mod to help relieve some 'issues' ...
Cpuquiet
Hello Hundsbuah, thanks for your kernel. I posted this in _That's kernel section. I installed a kernel on my HTC ONE X that has nvidia's cpu Cpuquiet driver driver implemented and it makes a huge difference in battery life (20%-30%) without sacrificing performance. I don't know if it can be implemented to tf700t, but it would be great if it did. Here is some info:
http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/08/cpuquiet.pdf
https://github.com/pboonstoppel/
ive asked mr.muffin/_that if the changes in fstab.cardhu are the only changes to make a data2sd version of the kernel
steveman29 said:
Hello Hundsbuah, thanks for your kernel. I posted this in _That's kernel section. I installed a kernel on my HTC ONE X that has nvidia's cpu Cpuquiet driver driver implemented and it makes a huge difference in battery life (20%-30%) without sacrificing performance. I don't know if it can be implemented to tf700t, but it would be great if it did. Here is some info:
http://www.linuxplumbersconf.org/2012/wp-content/uploads/2012/08/cpuquiet.pdf
https://github.com/pboonstoppel/
Click to expand...
Click to collapse
i have already activated that feature but i have disabled it again (i havent seen any improvements) but i didnt looked at batterylife. i will compile a version with Cpuquiet and send you a pm with the link
Hundsbuah said:
i have already activated that feature but i have disabled it again (i havent seen any improvements) but i didnt looked at batterylife. i will compile a version with Cpuquiet and send you a pm with the link
Click to expand...
Click to collapse
Thanks i will test battery life and will report to you. In my HTC ONE X i have to use fauxclock program to activate cpuquiet. Do you know if it can be activated by a script?
edit: I had 2 reboots with the test kernel. I don't know if it is because of cpuquiet or if you added other features too. I didn't have any reboots with the normal kernel.
steveman29 said:
Thanks i will test battery life and will report to you. In my HTC ONE X i have to use fauxclock program to activate cpuquiet. Do you know if it can be activated by a script?
Click to expand...
Click to collapse
afaik its managed by the kernel and the cpuq gov
steveman29 said:
edit: I had 2 reboots with the test kernel. I don't know if it is because of cpuquiet or if you added other features too. I didn't have any reboots with the normal kernel.
Click to expand...
Click to collapse
just for the others: reboot is fixed with version 1.4.1
Hundsbuah said:
ive asked mr.muffin/_that if the changes in fstab.cardhu are the only changes to make a data2sd version of the kernel
Click to expand...
Click to collapse
Your data2sd version is not working. The data should look like this in the fstab.cardhu file:
/dev/block/mmcblk0p1 /system ext4 noatime,noauto_da_alloc,nodiratime,barrier=0,nobh,ro wait
/dev/block/mmcblk0p2 /cache ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait
/dev/block/mmcblk1p2 /data ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait,encryptable=footer
/dev/block/mmcblk0p8 /data2 ext4 noatime,noauto_da_alloc,nosuid,nodev,nodiratime,barrier=0,nobh,errors=panic wait,encryptable=footer
i havent released a data2sd version yet
if these are the only changes, give me 5 min i will make an data2sd version
/edit: data2sd version added in first post
Hundsbuah said:
i havent released a data2sd version yet
if these are the only changes, give me 5 min i will make an data2sd version
/edit: data2sd version added in first post
Click to expand...
Click to collapse
I will give it a try and report back. Your kernel is getting better and better, I think it's going to be one of the best custom kernel since Clemsyn. Good work!!
AW: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
buhohitr said:
I will give it a try and report back. Your kernel is getting better and better, I think it's going to be one of the best custom kernel since Clemsyn. Good work!!
Click to expand...
Click to collapse
thank also _that. i read his howto and then i wanted to make my own kernel
Gesendet von meinem ASUS Transformer Pad TF700T mit Tapatalk 2
Re: [KERNEL][OC] Hundsbuah ★ 10.4.4.25
Is this for cm or stock
Sent from my MB865 using xda app-developers app
This kernel aims to be an alternative (and experimental) to Stock or custom ROMs (CM, Bliss,...) default ones, applying tweaks (kernel source configuration) and patches (if them apply) to improve general responsive, performance and functionality.
*Remember, test at your own risk.
BitO-KU
Base "pure" kernel with latest Nvidia code + Linux upstream (v3.10.108)
More info here.
Main Features for K12:
SafetyNet bypass (TESTING)
Latest Linux 3.10.108 code fully merged
Latest F2FS code backported from Linux 4.10
Multi Core and SMT optimizations enabled
Extra IO Schedulers (CFQ - default)
Extra Governos (Interactive - default)
Extra TCP Congestion algorithms (Cubic - default)
L2TP VPN enabled
ZRAM with LZ4 enabled (you can disable)
NTFS RW enabled
UTF8 as default code table
Module support disabled
CPUQuiet (CPU dynamic hotplug)
Main Features for KX10:
All K10-001 features + ...
OC for CPU and GPU (thx to @laufersteppenwolf )
Other optimizations:
Debug info stripped down
Branch jump optimizations
Clean cache
Front swap
Memcopy operations optimized for ARM A15
ZCache enabled
Cryptographic operations
Downloads:
BitO-KU
BitO-K12
BitO-KX10
Installation
Install ZIP via custom recovery
Install F2FS injector ZIP if you need proper F2FS support.
Notes
Don't forget flash DTB if necessary
If you need to update blobs, you can easily flash this zip (OTA 4.2), thx to @Steel01
Info about F2FS, and experimental TWRP to support it here.
I would be glad to get some feedback about battery life, performance, etc... All suggestions welcome :good:
Thnx:
@Steel01
@Bogdacutu
@faux123
@twistedumbrella
@berryman13
@Unjustified Dev
@SuperPichu
@corvus
Tegra Devs and every developer and tester behind and supporting this big community.
Big thx to everybody for helping to get a new device
List of donnors for a new Shield Tablet:
@xanthrax : $25
@gasgiver : $10
@primaleph : $25
@marvi0 : $10
@strann0 : $10
@DR_HAX34 : $15
-----------------------------
TOTAL: $95
XDA:DevDB Information
BitO-K, Kernel for the Nvidia Shield Tablet
Contributors
BitOBSessiOn
Source Code: https://github.com/BitOBsessiOn/android_kernel_nvidia_shieldtablet
Kernel Special Features: Latest Nvidia sources, stable, fast, responsive, smooth
Version Information
Status: Stable
Current Stable Version: K10-006
Stable Release Date: 2017-06-25
Current Beta Version: K12
Beta Release Date: 2018-05-28
Created 2015-04-01
Last Updated 2018-05-29
Could be worth mentioning the .IMG file can also be flashed using Flashify without having to connect to computer at all.
pretty and nice
Running almost perfect in CM12
Waiting for OC I know you can do it,I use run the shaky156 OC 2.499 kernel for almost 1 months with no problems and I switched to CM12
Thanks and keep the nice work
kickassdave said:
Could be worth mentioning the .IMG file can also be flashed using Flashify without having to connect to computer at all.
Click to expand...
Click to collapse
Thnx, OP updated.
kickassdave said:
Could be worth mentioning the .IMG file can also be flashed using Flashify without having to connect to computer at all.
Click to expand...
Click to collapse
BitOBSessiOn said:
Thnx, OP updated.
Click to expand...
Click to collapse
And right after flashing CM12 in TWRP
That's what I did anyways.
Anybody can give me feedback about battery on CM 12 / 12.1 when device screen off (deep sleep), please?
Thnx!
BitOBSessiOn said:
Anybody can give me feedback about battery on CM 12 / 12.1 when device screen off (deep sleep), please?
Thnx!
Click to expand...
Click to collapse
The - latest wifi ROM- version you uploaded in the CM12 thread also includes your kernel as presented here?
Is it possible to include colour profiles in the kernel? Love it on my nexus 5! Looking forward to seeing this move forward
Also is there a rest of world lte version in the works? Thanks
silasje1 said:
The - latest wifi ROM- version you uploaded in the CM12 thread also includes your kernel as presented here?
Click to expand...
Click to collapse
Yes, I always compile CM 12.x with my kernel version. The 12.1 is totally experimental.
ishamm said:
Is it possible to include colour profiles in the kernel? Love it on my nexus 5! Looking forward to seeing this move forward
Also is there a rest of world lte version in the works? Thanks
Click to expand...
Click to collapse
Take note for colour profiles but I don't know how complex it can be... I'll be studied, sure.
About LTE RoW (wx_un_do) vs LTE US (wx_na_do) they are totally compatible as @Steel01 and me have seen. I have LTE RoW model and actually use wx_na_do compilation. In the future, perhaps, we will create a specific branch.
BitOBSessiOn said:
Yes, I always compile CM 12.x with my kernel version. The 12.1 is totally experimental.
Click to expand...
Click to collapse
I will be away a few days so a lot of sleep time for the tablet Will report
Here's some cpu state time info for u. 51mhz is deep sleep right?
With CPU Spy you get how long the device is in deep sleep: http://forum.xda-developers.com/showthread.php?t=1011497
Cpu spy capture for u. I've been running it like I stole it all day.
I don't have installed CPU Spy but BBS reports that it sleeps like a baby.
Got a spare apk for bbs by chance?
Download Better Battery Stats XDA edition here http://forum.xda-developers.com/showpost.php?p=15869886&postcount=2
Just wanted to let u know the mic issue was a gapps thing, the minimal edition has problems, went back to pagapps (the final 03/15 one) and if I flash this kernel on steels cm12 it works perfect. No sound fc either. The ONLY issue I found is moving to SD. Still says no room even after the folder mount patch. Battery is great btw, thanks much for the work
Is it possible to add double tap to wake / sleep? ☺
Sent from my SHIELD Tablet
badly and +
drewski_1 said:
Is it possible to add double tap to wake / sleep?
Sent from my SHIELD Tablet
Click to expand...
Click to collapse
SD fix
OC CPU and GPU