Related
if you flash a rom that isn't for your region, you probably cant conect to 3g cause different regions uses different radio bands.
So, if you got this trouble, you might flash this binary via odin to recover 3g connection.
it's for north america, south america and thailand!
just flash any rom you want, then flash this in the phone section of odin:
http://www.mediafire.com/?726s506b9xdsjo8
uploaded by me.
if you think this is useful, say thanx is always welcomed.
let me know if this help anyone
I am reluctant to believe that you can't connect to a 3G signal because of a software limitation. If the radio does not support certain bands no modem.bin can solve the problem. The P6200 support 900/1900/2100 the P6200L support 850/1900/2100.
P_
not true
pakalrtb said:
I am reluctant to believe that you can't connect to a 3G signal because of a software limitation. If the radio does not support certain bands no modem.bin can solve the problem. The P6200 support 900/1900/2100 the P6200L support 850/1900/2100.
P_
Click to expand...
Click to collapse
if you dont know yet, models like p6200 and p6200L got the same hardware. But the firmware changes, because of regions. That's why p6200 got 3g over 850mhz band and p6200, on 900mhz.
The modem.bin is the firmware for this region.. like a driver, that make this band freq work.
if you dont try this yet.. go ahead and you will find that you cant connect to 3g in your country. this is only for thailand and americas
dont talk if you dont try first man
cheers
You are saying that both the P6200 and the P6200L have the same quad Band radio on 3G at 850/900/1900/2100. But the P6200 has a baseband that only supports 900/1900/2100 while the P6200L has a baseband that only supports 850/1900/2100?
Has anyone else successfully been able to flash the modem.bin of a P6200 over a P6200L and connect to 850mhz on 3G?
P_
yup.. im from chile and my device was SOD. so i have to flash a firmware from rusia.. there 3g band works on 900mhz so i only have edge on my GTP. i flashed the modem.bin from thailand (where 3g works on 850 mhz, like in south/centroamerica) and voila: IT WORKS.
You are confirming what I am saying : your TAB is a P6200L, thus has a 3G radio that works on 850/1900/2100 . You flashed a baseband for a radio that works on 3G on 900/1900/2100 . While your phone was still working on Edge ( since the radio is indeed a quad band on GPRS/Edge ) it could not connect on 3G.
I am assuming that the code of the two baseband is the same for the GPRS/Edge part, and this is why you are still able to flash it and have it partially working on a radio with different frequency.
But do not tell me that the P6200 and the P6200L have the same radio because they don't.
P_
they do have the same HARDWARE but different FIRMWARE
You've lost your mind. Someone please call 911
i already test that on 3 different devices: i9003, galaxy fit and galaxy ace.. all the same thing. and now, the GTP..
that's why im talkin bout that.. because i try it already man
P6200L to P2600 firmware to get 3g on 900mhz
pakalrtb said:
You are confirming what I am saying : your TAB is a P6200L, thus has a 3G radio that works on 850/1900/2100 . You flashed a baseband for a radio that works on 3G on 900/1900/2100 . While your phone was still working on Edge ( since the radio is indeed a quad band on GPRS/Edge ) it could not connect on 3G.
I am assuming that the code of the two baseband is the same for the GPRS/Edge part, and this is why you are still able to flash it and have it partially working on a radio with different frequency.
But do not tell me that the P6200 and the P6200L have the same radio because they don't.
P_
Click to expand...
Click to collapse
matacuras said:
yup.. im from chile and my device was SOD. so i have to flash a firmware from rusia.. there 3g band works on 900mhz so i only have edge on my GTP. i flashed the modem.bin from thailand (where 3g works on 850 mhz, like in south/centroamerica) and voila: IT WORKS.
Click to expand...
Click to collapse
matacuras said:
they do have the same HARDWARE but different FIRMWARE
Click to expand...
Click to collapse
Please I will like to buy samsung galaxy tab 7.0 plus P6200L is it possible it can be flash with P6200 so that I can get 3G on 900mhz
NO
yes, you can. i already done that
...
pakalrtb said:
NO
Click to expand...
Click to collapse
please be real. to say something AT LEAST try it first. you dont know anything about this topic, so please dont be like that. you can change the firmware to anything you want and vice versa.
It's possible, but you'll have to find the modem from the P6200. I don't think anyone has uploaded it yet (could be wrong).
you are wrong my friend =)
rendler said:
It's possible, but you'll have to find the modem from the P6200. I don't think anyone has uploaded it yet (could be wrong).
Click to expand...
Click to collapse
open the rom file ..is a .tar file, so you can open it with winrar. inside you will find MODEM.BIN.
that's it
greetings
it did help.
matacuras said:
let me know if this help anyone
Click to expand...
Click to collapse
With The ICS for Austria, I had to flash this modem to get GSM signal. Thank you very much indeed.
Omg pls help me
matacuras said:
if you flash a rom that isn't for your region, you probably cant conect to 3g cause different regions uses different radio bands.
So, if you got this trouble, you might flash this binary via odin to recover 3g connection.
it's for north america, south america and thailand!
just flash any rom you want, then flash this in the phone section of odin:
http://www.mediafire.com/?726s506b9xdsjo8
uploaded by me.
if you think this is useful, say thanx is always welcomed.
Click to expand...
Click to collapse
Matey I live in Australia I ihad firmware from Hong Kong but I the used this to fix a messed up ROM and wiped it with a pit file as well now I have lost 3G HSPDA all I have at the top is H by the way I am using a Galaxy S4 so far you are the only person that I have found with a fix can this be adapted to the GS4 to work on the original firmware?? If not do you know what direction to point me to I have tried doing all the manual APN etc. but no go please I would be so grateful for any advice given.....
DEVICES GALAXY S4 GT-I5905 NOTE II GT-N7105 NOTE II GT-N7100:good:
Thank you!
This method works for my P6200 phone. Now I can connect to 3G at 850MHz. Amazing, thank you!
We don't have a thread with our modems in a flashable zip so here is a list of Modems I have got a hold of for the I9305
If anyone has any others feel free to add to the thread
Link To All Modems
What modems I have at the moment
I9305
BUALI6
DXALI7
XXALI5
XXALI9
XXALJ2
XXALK2
ZHALI2
AEALK2
XXALI7 (Thanks flydutch)
XXALK3 (Thanks flydutch)
XXBLL3
XXBLL5 (Thanks AndyCr15)
XXBMA2
XXCMB2
XXBMC1 (Thanks Kinmach)
XXBMD1 (Thanks djembey)
XXBMD5
XXBME1
BVBMF1
I9305T
UBALK2
DVALI5
DVBLL3
UBBMB2
DVBME1
I9305N
XXALI8 (Thanks MrPontus)
XXBLL1 (Thanks MrPontus)
XXBMC2
Flashing Instructions
Download modem
Put flashable zip on sdcard
Boot into recovery
Flash modem file
Reboot
Thx Mate!!!
Regards
Sonic
great job m8, keep up the good work
The good work :good:
Thank you txr33 share.
At the risk of invoking the XDA idiot seeking missiles - are all of these modems "safe" to try on any network?
I'm on T Mobile UK, and suffering horrendous connectivity problems when I am at work. Eager to try out a few modems to see if I can lock onto a better signal, but I'm sure I read something once saying that T Mobile require specific modems because of something particular to their network?
Brilliant mate.
Which is the UK EE model?
Thx, greate work, now I can use the modem that I want.
Thanks so much! Can someone recommend the best modem for Optus Australia please ?
Sent from my GT-I9305 using xda premium
is it a good or bad idea for me to flash one of these modems?
I have the GT-I9305N (LTE 900/1800/2600)
my current modem is I9305NXXALI8
edit: I flashed and it seems to work ok
edit2: 4G and 3G broke, only have "E" now and a ****ty 0.05Mbps...
New Modem XXALI7
New modem for you all extracted from T-Mobile Germany:
https://www.dropbox.com/s/tnkwkvikawac3u7/XXALI7.zip
txr33 can you add it to your first post?
Greets
I did some testing and found the best modem for my phone. Thanks again OP
great!
thx txr33. good chance to test several modems for me.
maybe a short overview could be useful. just to see which modem offers best connectivity in which countries.
__________________________________
Samsung Galaxy SIII LTE gt-i9305 (16 gb)
Rom: Ripper Rom v4.1 XHBLJ1
Kernel: Perseus 3.0.36
Website says i need to log in so i dont have access to it?
tomj333 said:
Website says i need to log in so i dont have access to it?
Click to expand...
Click to collapse
That is correct
Greets
tomj333 said:
Website says i need to log in so i dont have access to it?
Click to expand...
Click to collapse
flydutch said:
That is correct
Greets
Click to expand...
Click to collapse
I have updated the link, let me know if that is working now
Syndikat0508 said:
maybe a short overview could be useful. just to see which modem offers best connectivity in which countries.
Click to expand...
Click to collapse
I tested all modems for about two and a half hour and did some measurement.
I'm living in Germany, Baden Württemberg and for me the two ...ALK2 work best.
XXALK2 has a slightly better reception, but AEALK2 is better at WLAN conncectivity (faster) and finding internet connection at poor reception.
Interestingly the original firmware (T-Mobile) is the worst from all the listed ones, by far!
The internet speed in all networks (3G, H+...) is half (!) as fast compared to the ...ALK2 ones
I attached the exel chart I did for the test. It's German, but I hope you'll get what it means, otherwise I'll translate it.
Hi all,
This may help a few French users, and maybe others too. I quickly made a CWM flashable zip by using one of the files available on this thread (many thanks to all the devs for the great job by the way !) and replacing the modem inside by the one contained in the French SFR I9305XXALK5 ROM file (jellybean 4.1.1).
I noticed that this modem is giving me by far the best data connexion when used along with custom ROMs. As some German users mentionned earlier, I noticed that when I use custom ROMs (Ripper or Supreme) I can not benefit from Dual Carrier (or 4G) anymore. My data connexion is then restricted to 3G or HSPDA.
By flashing this file, I managed to at least connect in HSPDA+. But still no dual carrier, unfortunately . As I am a very basic user, I can not investigate the reason why I lose 4G when I flash a custom ROM (4G works nicely when I use SFR provider stock ROM).
If you want to give it a try, the file is available HERE.
I would be glad to read if some people are experiencing the same problems.
ok, flashing your GT-I9305 modems on a GT-I9305N was a bad idea, it broke my 4G and more or mess my 3G too
I only had "E" (Edge?) on AEALK2 and I had 0.05Mbit
with XXALK2 I messured ~2Mbit and I had 3G and H+ for a short while.
I found a source of my original firmware and extracted the modem and made it to a flashable cwm zip
(first time I did this and I did it the easy way, editing an existing .zip downloaded from first post, so my .zip will have the "Ripper" message while flashing)
tested ok by me.
I9305N XXALI8
https://www.dropbox.com/s/bqou3hw79uprlsu/I9305NXXALI8.zip
MrPontus said:
ok, flashing your GT-I9305 modems on a GT-I9305N was a bad idea, it broke my 4G and more or mess my 3G too
I only had "E" (Edge?) on AEALK2 and I had 0.05Mbit
with XXALK2 I messured ~2Mbit and I had 3G and H+ for a short while.
Click to expand...
Click to collapse
Hi
That's a pity, sorry for this problem. The modem I took from the French provider SFR is I9305AEALK2. I just discussed with a member on a French forum, and he thinks that this version is optimized for SFR network. But the fact that your phone is a "N" version can also explain the differences. I do not know what is the difference between N and non-N versions.
I think I will try your modem, in order to see if I can get a better connexion. With my file I get something like 10 Mbps on speedtest when connected on HSPDA+.
I think N is for Nordic. Im fr sweden & got the N version...
I bought just yesterday a samsung galaxy r9103, all good and in order but i have a lillte problem.
In Csc i only have CHN and CHZ.
I`ve downloaded and flashed using odin and guide ( 10x for that) Gb 2.3.6. Non branded and all region PDA, MODEM and CSC files.
After that i used that code*#272*IMEI# but also got just those 2 Sales codes like i said.
And who sold that phone to me didn'ttold me that this phone is boght form China, and i dont like those stck apps that are installed after i flashed that rom ( and also i can`t use gmail .apk, playstore.apk, gmaps and so on).
tell me is there a solution that ca can fiind to this problem.
I want toinstall a allreagion CSC so my problems will be solved, but i didn`t find anything ( tutorial, guide, thead) about my problem.
I hope someone can help me to solve this problem.
Thank you so much!
Have a good day all!
Buddy can you please explain whats the problem you are facing exactly so that we can try to help you...
I cannot instal playstore market and gmail aplication.
and
I cannot change my csc although i flashed a all region CSC.
That my problem ! And i seek a solution!
10x
laurct said:
I cannot instal playstore market and gmail aplication.
and
I cannot change my csc although i flashed a all region CSC.
That my problem ! And i seek a solution!
10x
Click to expand...
Click to collapse
If you are rooted & want to do..then root your phone & switch to CM10.1. It has all solutions.
So a solution to remain on actualy rom 2.3.6gb all region u dont have?
See pictures.!
which region are you in? Which region rom would you like to use? You can flash any stock 2.3.6 Official Samsung ROM from this link
Welcome to the SGR Family
You will have to download Odin in your PC and flash the stock rom you want via that software. Then you will have another region's CSC in your phone. The current bugfree and stable 2.3.6 ROMs are the austrian "3" provider rom. To be honest, the reason why most of us here recommend CM10.1 is because of its awesomeness. Another point is that Gingerbread Roms (2.3.6) and ICS Roms (4.0.4) which were officially released by samsung are buggy for us. For eg, in GB Indian CSC version Rom the data counter doesnt work properly and in ICS the games do not work properly, there is frequent stuttering etc. Hence we moved to jelly bean 4.2 in cm10.1 which is just beyond amazing.
However, if you use GPS often or skype/other voice calling apps over the internet they may not work properly yet. GPS is sort of moody and is working for some and not for the rest.. not sure why.. but i'm sure all these bugs will be squashed out soon..
Happy flashing
whats up guys ,,,i have galaxy s8+ from att
i have some problems with the system ,,i downloaded the firmware from sammobile web. and when i flash it its converted to tmobile !!!
at sammobile they dont have the original rom ( samsung rom )
so anybody have an idea what can i do or where to find the rom please
my regards
espada211 said:
whats up guys ,,,i have galaxy s8+ from att
i have some problems with the system ,,i downloaded the firmware from sammobile web. and when i flash it its converted to tmobile !!!
at sammobile they dont have the original rom ( samsung rom )
so anybody have an idea what can i do or where to find the rom please
my regards
Click to expand...
Click to collapse
There is the most recent Odin file in the list page of the forum
thanks
Charlie115 said:
There is the most recent Odin file in the list page of the forum
Click to expand...
Click to collapse
thanks for replay
yeah i saw it but the problem not from odin ,,i need the rom for he phone
when i downloaded it from sammobile suppose to be for ATT but when i flash it it T-mobile ,,,theres something wrong i dont know what is it exactly
https://forum.xda-developers.com/att-galaxy-s8+/how-to/odin-restore-files-att-g950u-t3724033
espada211 said:
thanks for replay
yeah i saw it but the problem not from odin ,,i need the rom for he phone
when i downloaded it from sammobile suppose to be for ATT but when i flash it it T-mobile ,,,theres something wrong i dont know what is it exactly
Click to expand...
Click to collapse
What sim card are you using , at&t or t-mobile? All firmware are the same. All is base on providers sim card. If you use T-Mobile you will have T-Mobile no mater what firmware you flash.
On Edge of Galaxy
Hi guys! Can you tell me how much signal do you have? I tried flashing three different modem.bin from Stock Roms trying to getting a better signal, because I have a bad signal, and I didn't have lucky.
My signal is: -99 dbm 41 asu (just 2 bars or one).
Do you have the same signal?
Im trying to guess if it's a software problem (Custom ROM, modem.bin etc), a Mobile Network Operator problem or a Hardware problem (something broken or idk).
Thanks!
PS: I have a Samsung J7 2015 (J700m)
The problem, I guess, is software. But not what you think - not the roms.
Backup your data - sms, contacts, messages etc, and full wipe and then flash the latest stock firmware via Odin.
This will give you the latest radio software. Maybe this will work better. :good:
On the Samsung site the latest J700M firmware is 700MUBU2BRxx depending on country. E.g. xx for Brazil is C2, for Mexico D1, Chile A1.
Download from updato.com your country specific firmware; link below.
J700M stock firmware on updato.com
Good luck!
dodo2244 said:
The problem, I guess, is software. But not what you think - not the roms.
Backup your data - sms, contacts, messages etc, and full wipe and then flash the latest stock firmware via Odin.
This will give you the latest radio software. Maybe this will work better. :good:
On the Samsung site the latest J700M firmware is 700MUBU2BRxx depending on country. E.g. xx for Brazil is C2, for Mexico D1, Chile A1.
Download from updato.com your country specific firmware; link below.
J700M stock firmware on updato.com
Good luck!
Click to expand...
Click to collapse
Hi bro, thanks for the answer!
Alright, I'll try. Im downloading J700MUBU2BRA1 (Im from Argentina) and I'll flash it via ODIN. After that, I'll come back here to tell you if it works.
Just 2 more questions:
1) Im downloading the "ARO" Version. Its okay? My phone is Factory Unlock. I saw "Claro" and "Movistar" versions, and they are Mobile Network Operator, but I don't Know what its ARO or ANC.
2) After flashing the Stock Firmware, I can back to EnigmaUX or other custom rom right? Without losing the fix, assuming this helped me.
Thanks! Have a nice day :good:
See inserts below .....
Cherno87 said:
Hi bro, thanks for the answer!
Alright, I'll try. Im downloading J700MUBU2BRA1 (Im from Argentina) and I'll flash it via ODIN. After that, I'll come back here to tell you if it works.
Just 2 more questions:
1) Im downloading the "ARO" Version. Its okay? My phone is Factory Unlock. I saw "Claro" and "Movistar" versions, and they are Mobile Network Operator, but I don't Know what its ARO or ANC.
ARO looks good. I think its the generic firmware for Argentina (as opposed to Carrier specific, with maybe customization, bloatware, locked apn etc)
2) After flashing the Stock Firmware, I can back to EnigmaUX or other custom rom right? Without losing the fix, assuming this helped me.
Yes. You'll have to reinstall TWRP first
Latest TWRP v3.2.3.0 is here Official TWRP page for J700 M/F/H exynos
Thanks! Have a nice day :good:
Click to expand...
Click to collapse
dodo2244 said:
See inserts below .....
Click to expand...
Click to collapse
Thanks for trying man! But this didn't work.
Not just after flashing a Custom Rom, even with Stock Firmaware I had bad signal, and now with Xperience OS Too. See attached screenshots :crying:
Hmmm ........
Maybe you're just in an area with a weak signal.
Have you ever seen a stronger LTE signal right there?
Try this to analyze the LTE signals around you.
Advanced LTE Discovery on Google Playstore
At least you have the latest Radio for your fon.
dodo2244 said:
Hmmm ........
Maybe you're just in an area with a weak signal.
Have you ever seen a stronger LTE signal right there?
Try this to analyze the LTE signals around you.
Advanced LTE Discovery on Google Playstore
At least you have the latest Radio for your fon.
Click to expand...
Click to collapse
Maybe, as I thought, its a Hardware problem... because I have a tower near my house, less than 100 meters (328 feet or 109 yards). It's weird... tomorrow comes a friend who also have a J7 but full stock, never root or anything, I'll see how much signal she have.