I rooted my cousin's phone and first installed Infected on it. I guess everything seemed fine, until a couple months later where he told me his phone was starting to suck again. I thought it was starting to slow down from having too many things running on it, but when I got my hands on it there seemed to be a deadspot on the middle of the screen.
In the advanced power menu, "Reboot" was untouchable for reference on where the dead spot is. It seemed to span the entire width of the phone when held vertically. He also told me that the whole screen seems to be active when it's changed to landscape mode(weird).
But more often than not, it's unresponsive right in the middle of the screen.
I have since installed Thunderstick full bown for him, but the screen is still unresponsive in that same spot, so I can't credit the ROM for messing up...
anyone else run into a similar situation? Does this mean we may need to install a new touchscreen?
KrisPeezy said:
I rooted my cousin's phone and first installed Infected on it. I guess everything seemed fine, until a couple months later where he told me his phone was starting to suck again. I thought it was starting to slow down from having too many things running on it, but when I got my hands on it there seemed to be a deadspot on the middle of the screen.
In the advanced power menu, "Reboot" was untouchable for reference on where the dead spot is. It seemed to span the entire width of the phone when held vertically. He also told me that the whole screen seems to be active when it's changed to landscape mode(weird).
But more often than not, it's unresponsive right in the middle of the screen.
I have since installed Thunderstick full bown for him, but the screen is still unresponsive in that same spot, so I can't credit the ROM for messing up...
anyone else run into a similar situation? Does this mean we may need to install a new touchscreen?
Click to expand...
Click to collapse
I had a similar issue, only mine was at the bottom of the screen. I untooted warrantied my bolt, I would suggest the, however if he does not have a warranty or insurance then most likely you will news to replace the screen/digitizer
sent from my Thundershed Thunderbolt
Related
hi,
newbie in this forum and newbie in using a phone running an operating system. please help.
bought the phone in late June 2008, received it before the month ended, installed TomTom Navigator 6 on it and tested the various hotspot around my place, happy with it and stashed the phone on a safe place in the closet as T-Mobile don't have 3G service. then last week I decided to get an ATT plan (can't stand the iPhone 3G ad) so I can tasted the blazing HSDPA speed.
last week on Wednesday I use the phone as a GPS to get me to a hotel I'm staying near the White House. it got me there no problem. then the next day, the horror started. I was trying to plot a walking course to many of the nearby "stuff to see" and the phone just sits there saying that it can't get a valid GPS signal. then I tried to go to Google Maps using IE. the screen started scrolling, literally scrolling, then when it stopped, whatever usually on the top ended up in the middle of the screen, the bottom ended up on the top, and the screen was "split" in 2 with the edges staying dead center. so I thought, ah, this phone is just too tired, it ran out of memory (as all windows always does ignoring how much ram you put, at least in my experience), so I press the power button to let it do the light sleep. when I turned it back on, the phone seems to work the problem out and I tested it by going online.... guess what, the screen started scrolling again and even adding "I can play dead". the screen is not responding to anything (touch, tap, swipe, rotating the scroll wheel, pressing the buttons) beside the power button that seemed to turn the display off. when I turned it back on, the screen just gives off some light on the sides, but that's it, the screen is blank. taking out the battery doesn't even fix the "blank" screen thing. the device seemed to work out the problem after I left it unused for about 2-4 hours, but then it started again when I tried to do anything (all I ever do with my Touch Cruise is going online via wifi and/or att data plan, plus using the phone as GPS).
even after resetting the phone to a factory default doesn't help (did it this morning via a representative guidance). so I'm stumped. within a week, the phone basically broke, then how about another year? will it become bits and dust?
anyone can give me advise? one representative I talked to said that I can get a replacement for the phone but the last one I talked to said that HTC only have an option of repairing the phone but not replacing one.
thank you to all who reads.
Really weird.
Try to get replacement, if not possible, get it repaired.
If hard reset / factory default did not help... It does sound to me like malfunctioning device.
On the other hand... is it provider locked device or unlocked one?
I guess it's unlocked, but I'm bit confused since you mention both T-Mo and AT&T...
I do hope that there's original ROM on it...
For what it's worth, my XDA Orbit II has just developed the exact same fault. I tries soft and hard resets, re-flashed with 6.5 rom and then a 6.1 version, all to no avail. It goes through the boot sequence and asks for a screen calibration - if you ignore the scrolling screen and tap in the right places, the calibration is accepted (which makes me think it's not the digitizer. The screen itself seems to be fine - no missing pixels, cracks, - it displays everything it should only with a constant vertical scroll. If it had a vertical hold knob, I could fix the problem.
Really weird, it was working fine this morning and after sitting in its cradle for a couple of hours it is now like this.
Any ideas as to how I might cure the problem would be gratefully received.
Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.
I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,
i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P
fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?
pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!
Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,
you have a pm fkoong.
I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later
Hello everyone,
Today i installed my parrot bluetooth carkit. And after i connected a couple of times my phone became unstable.
So unstable that i'm not able to tap the screen.....
I don't know what happened due that i have hard resetted the phone a couple of times and even switched from m-rom to energyrom 3.0 with the same results.
Only one thing that was strange is that the touch pro start up screen with the red characters in the right bottom.
That after i flashed m-rom to energy rom that the touch pro characters in the middle were still different like the way that are made in m-rom. With the addition : powered by m-rom
So this means that the phone doesnt format his core
Help please give me any advice.
UPDATE:When backlight is dimmed, it will be bright if i touch it once. Afterwards it will maintain the same.
I have tried several roms and tried to restore my SPL aswell, without any results till now.
I'm getting desperate now. Due that i stays in the screen of ALLIGNMENT, so i'm really not able to start up anything from now.
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
I have a OIL spot in the screen when i keep it in bright light.
This could be occured when the phone was inside my bag during my beach visit.....
I guess the phone turned liquid by the sun....
Does somebody ever experienced the same issue?
fone_fanatic said:
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
Click to expand...
Click to collapse
I have a oil spot, and the raster of the phone with little dots in visible in the ligt.
I have made a repair order at HTC.
Which didn't satisfy me at all!
They told me that it is not covered by warranty. I was shocked, this will cost me around 70 euro to fix, and my shop warranty is still valid. So i called the shop to explain this.
And they said if this is not caused by a user, we will change the phone, but first we what to have a diagnose from HTC.
So i decided to let HTC pick up my phone . They will have a repair time of 5 up till 10 days.
That's fair, but i'm not really happy with this situation. Because i think that the screen is the most harmful component. And this means that if this part fails that my phone becomes obsolete.
I will post my conclusion after i got my phone repaired.
I will return to the STOCK spl and the original rom just for warranty purposes.
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
fone_fanatic said:
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
Click to expand...
Click to collapse
Nope nothing happened at all.
Thats the strange thing about this situation.
I was in the shadow of the sun and the bags were only filled with clothes. So it didn't drop or something else.
I was able to use my phone during the day.... and was getting more unresponsive during the time that went by.
So i will not accept any blame of myself, due that i have a warranty of 1 year from the factory which will not cover your display :S
But also have the store warranty... So i told the store that i will return the phone if there are any costs.
The store told me that they will wait on the diagnose of HTC which i have sent it to myself to reduce the time.
If the diagnose tells that it's not my fault, then i can return my phone probably.... He couldn't promise it due that i want to see the diagnose first.
So I will wait on HTC's conclusion.... And i'm afraid that they will try to blame me for it....
They better not I will be a pain in there arses
Hello, I have exactly the same problem. After flashing from energyrom 3.0 to Aurora, a few hours later, i couldn't get my phone out of lock. (slide a button to the right or left on your touchscreen)
I tried a soft reset, but the phone started up with the same locked screen. So, i tried a hard reset. From that moment on i got stuck at "align screen". I ve flashed several times with several ROM's but nothing. (by the way, whatever rom i install, the first screen always says: Energyrom by NTGZ28)
I used the trick to paste welcome.not on the micro card, to bypass the align screen. That works, but the touch screen doesn't work. I 've removed the protection of the screen, but that doesn't make a difference either. My device didn't fall, came into contact with water or anything that could harm the thing. Oh, when the backlight is dimmed, the screen reacts to tapping it. Please help me out ??
resolt the issue. Because of a lot scraches (spelled ok?), i removed the protective screen. When i put the new screen on, everything worked !
hivesnl said:
I have a OIL spot
Click to expand...
Click to collapse
i had does as well and then touch screen stopped working..
had to replace digitizer, unfortunately had to replace LCD screen and digitizer at the end (was not able to separate digitizer from LCD)
Ok, so I've had my Fuze like 4 or 5 months now and have had no problems until a day or two ago. I try to do anything, my screen does not work properly. I touch somewhere and it doesn't register it 95% of the time. I looked at the screen and there seems to be a little liquid under there but I don't know how it got there, I put a screen protector on it the whole time I've had it and it just appeared out of nowhere and it's never had any kind of liquid spilt on it or anything. I try to click on the text box for SMS in touchflo 2.1 and it won't go in there and it starts moving the text messages up and down and opening task manager randomly and whenever I open the start menu it goes right into moving the items around. I have tried reflashing but have not yet tried to go back to stock. I'm going to try that and if it doesn't work I'm takin it in to AT&T to see if they can either give me a new one or fix it.
I have had the same problem with my screen on Touch Pro.
I had to get the phone repaired under warranty. I think HTC replaced the screen.
Search the forums, quite a few people have had this problem.
Has it been exposed to heat?
Seeing as your a fellow texan, have you left it in your car or under direct sunlight for a prolonged period?
I'd look up an At&t Device Support center and take it to them, they should change the device on the spot if there's no physical damage and its still under warranty.
Make sure you revert to the Stock/Shipped ROM and SPL (i wouldn't worry too much about the SPL though if you can't get it, i've turned in 2 devices with a hardSPL and nothing ever happened, but its better to be safe then sorry right?)
best of luck
Hey guys I'm posting today because I have a little problem or a huge problem I should say at this point. Anyways, I've owned a Captivate since they first came out a couple months ago. I've never had any problems with mine up until about 2 or 3 months ago when the phone started doing something weird. The bottom row of soft buttons on the phone will press themselves. Now only the back button and home button press themselves. The problem started out around the time I flashed Serendipity for the first time (not blaming the rom) I noticed the buttons would press themselves randomly at times and it started out slow, maybe once or twice a day and it didn't really annoy me. Flash forward to today and my phone is practically unusable because of this problem. Any time I wake the device from sleep the home and back buttons will rapidly press themselves over and over and over until I furiously tap either button to get the buttons to stop pressing themselves.
The problem will restart itself about 30 seconds after stopping it and It never stops. I've tried numerous re-flashes with no avail. At first I thought the problem was caused by a bad flash on my part because the problem started after I had just flashed a new rom. But I've known for a while now that wasn't the case. I've never dropped this phone or submerged it in water. This problem just popped up out of the blue one day and never went away.
Do I have a defective phone?
Thanks for the help.
Had the same problem, not to the extent your having more like once an hour they would go crazy. Placed the phone in some rice over night and the problem was gone. Im pretty sure, for me at least, was condensation had worked its way under the glass and was causing contact problems. Worth a shot for you. Never had the problem again after that.
I never even found out how it happened, though I suspect the steam from a hot shower did it.
how is your gps? if it sucks, go for warranty while you can, samsung has a 1 year warranty cross your fingers for a better replacement, or if you go through Att and you get a refurb who knows..... the board inside wont match the date under the battery and who knows how it will work.
whiteguypl said:
Had the same problem, not to the extent your having more like once an hour they would go crazy. Placed the phone in some rice over night and the problem was gone. Im pretty sure, for me at least, was condensation had worked its way under the glass and was causing contact problems. Worth a shot for you. Never had the problem again after that.
I never even found out how it happened, though I suspect the steam from a hot shower did it.
Click to expand...
Click to collapse
I'll try the rice thing, can't believe I've never thought of that. I've never dropped water on the phone but it has been in the bathroom with me when I've taken showers or what not. Thanks for the idea.
TRusselo said:
how is your gps? if it sucks, go for warranty while you can, samsung has a 1 year warranty cross your fingers for a better replacement, or if you go through Att and you get a refurb who knows..... the board inside wont match the date under the battery and who knows how it will work.
Click to expand...
Click to collapse
My GPS does indeed suck, It takes about 5-10 minutes to get a lock on anything sitting outside. My phones still under warranty until this November so I think if I don't solve the problem soon I'll just get a new one.
Does ATT upgrade the phone to a newer version if you replace it with the warranty? I might hold out until ATT releases the Cappy 4g or whatever they're going to call it.