Hello everyone,
Today i installed my parrot bluetooth carkit. And after i connected a couple of times my phone became unstable.
So unstable that i'm not able to tap the screen.....
I don't know what happened due that i have hard resetted the phone a couple of times and even switched from m-rom to energyrom 3.0 with the same results.
Only one thing that was strange is that the touch pro start up screen with the red characters in the right bottom.
That after i flashed m-rom to energy rom that the touch pro characters in the middle were still different like the way that are made in m-rom. With the addition : powered by m-rom
So this means that the phone doesnt format his core
Help please give me any advice.
UPDATE:When backlight is dimmed, it will be bright if i touch it once. Afterwards it will maintain the same.
I have tried several roms and tried to restore my SPL aswell, without any results till now.
I'm getting desperate now. Due that i stays in the screen of ALLIGNMENT, so i'm really not able to start up anything from now.
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
I have a OIL spot in the screen when i keep it in bright light.
This could be occured when the phone was inside my bag during my beach visit.....
I guess the phone turned liquid by the sun....
Does somebody ever experienced the same issue?
fone_fanatic said:
Have you dropped your device recently?
Try flashing a stock/shipped rom and hard-reset when after flashing the rom when you get to the "Tap here to set up your device" screen.
Click to expand...
Click to collapse
I have a oil spot, and the raster of the phone with little dots in visible in the ligt.
I have made a repair order at HTC.
Which didn't satisfy me at all!
They told me that it is not covered by warranty. I was shocked, this will cost me around 70 euro to fix, and my shop warranty is still valid. So i called the shop to explain this.
And they said if this is not caused by a user, we will change the phone, but first we what to have a diagnose from HTC.
So i decided to let HTC pick up my phone . They will have a repair time of 5 up till 10 days.
That's fair, but i'm not really happy with this situation. Because i think that the screen is the most harmful component. And this means that if this part fails that my phone becomes obsolete.
I will post my conclusion after i got my phone repaired.
I will return to the STOCK spl and the original rom just for warranty purposes.
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
fone_fanatic said:
dont tell them that you spilt anything on it or dropped it. Although they will be able to tell if there is water damage to the device you might get lucky and they won't notice.
Now is the oil spot from leaving it in the sun or suntan lotion getting in the device?
Click to expand...
Click to collapse
Nope nothing happened at all.
Thats the strange thing about this situation.
I was in the shadow of the sun and the bags were only filled with clothes. So it didn't drop or something else.
I was able to use my phone during the day.... and was getting more unresponsive during the time that went by.
So i will not accept any blame of myself, due that i have a warranty of 1 year from the factory which will not cover your display :S
But also have the store warranty... So i told the store that i will return the phone if there are any costs.
The store told me that they will wait on the diagnose of HTC which i have sent it to myself to reduce the time.
If the diagnose tells that it's not my fault, then i can return my phone probably.... He couldn't promise it due that i want to see the diagnose first.
So I will wait on HTC's conclusion.... And i'm afraid that they will try to blame me for it....
They better not I will be a pain in there arses
Hello, I have exactly the same problem. After flashing from energyrom 3.0 to Aurora, a few hours later, i couldn't get my phone out of lock. (slide a button to the right or left on your touchscreen)
I tried a soft reset, but the phone started up with the same locked screen. So, i tried a hard reset. From that moment on i got stuck at "align screen". I ve flashed several times with several ROM's but nothing. (by the way, whatever rom i install, the first screen always says: Energyrom by NTGZ28)
I used the trick to paste welcome.not on the micro card, to bypass the align screen. That works, but the touch screen doesn't work. I 've removed the protection of the screen, but that doesn't make a difference either. My device didn't fall, came into contact with water or anything that could harm the thing. Oh, when the backlight is dimmed, the screen reacts to tapping it. Please help me out ??
resolt the issue. Because of a lot scraches (spelled ok?), i removed the protective screen. When i put the new screen on, everything worked !
hivesnl said:
I have a OIL spot
Click to expand...
Click to collapse
i had does as well and then touch screen stopped working..
had to replace digitizer, unfortunately had to replace LCD screen and digitizer at the end (was not able to separate digitizer from LCD)
Related
Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.
I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,
i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P
fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?
pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!
Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,
you have a pm fkoong.
I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later
Ok, so I've had my Fuze like 4 or 5 months now and have had no problems until a day or two ago. I try to do anything, my screen does not work properly. I touch somewhere and it doesn't register it 95% of the time. I looked at the screen and there seems to be a little liquid under there but I don't know how it got there, I put a screen protector on it the whole time I've had it and it just appeared out of nowhere and it's never had any kind of liquid spilt on it or anything. I try to click on the text box for SMS in touchflo 2.1 and it won't go in there and it starts moving the text messages up and down and opening task manager randomly and whenever I open the start menu it goes right into moving the items around. I have tried reflashing but have not yet tried to go back to stock. I'm going to try that and if it doesn't work I'm takin it in to AT&T to see if they can either give me a new one or fix it.
I have had the same problem with my screen on Touch Pro.
I had to get the phone repaired under warranty. I think HTC replaced the screen.
Search the forums, quite a few people have had this problem.
Has it been exposed to heat?
Seeing as your a fellow texan, have you left it in your car or under direct sunlight for a prolonged period?
I'd look up an At&t Device Support center and take it to them, they should change the device on the spot if there's no physical damage and its still under warranty.
Make sure you revert to the Stock/Shipped ROM and SPL (i wouldn't worry too much about the SPL though if you can't get it, i've turned in 2 devices with a hardSPL and nothing ever happened, but its better to be safe then sorry right?)
best of luck
I need to align the screen again & again can any one help me out wer the problem lies
how did this happen? i also encounter a similar problem, when the phone gets warm... when i press on the right side, the click registers mode and more to the left... and when that happend, if i try to go to the alignment screen, it just hangs in there like.. forever... if i put the phone in standby mode, everything gets back to normal in a few minutes.. the problem repeats every time the phone gets warm...
Same
First i was also having the similar problem but now its totally unaligned i.e even after a time its same i click on extreme left it click on extreme right
nasty man... dunno why this is happening... so, my screen is dying.. damn :| what kind of mods did u do to your phone? software ones
I have the same problem! Seems this is an manufacturing issue that's affecting many Diamonds! Does the warranty cover this?
Same problem
Hi Guys,
i'm also facing the same problem,
i have hard resetted my mobile then for a week it worked fine and then again the same problem... damn i lost my all data while hard resetting.... does any one have solution.
did u guys found n e solution
crazymushroom88 said:
did u guys found n e solution
Click to expand...
Click to collapse
YEAH! ) i sent mine to warranty today, lol 15 long days at max until it will be back in my loving arms
i dont know if this might help
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
i can see some leaked fluid above my screen ........... i cannot even explain it , because it's above the screen but i cannot touch it ........ so it's in between.....
i've had the same thing happen to me and sent it in for warranty.
came back ok for awhile, now its happening again. I usually just suspend my phone (power button) and give the LCD a rub that helps it a little, buts its quite unbearable at times.
I've sent it in to warranty for a second time today, warranty is expiring on the 8th of next month so they better fix it by then .
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again.
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again. (Only gets blurry flickery at boot)
My diamond only get flickery at the boot and by going to standby and back it disapears.
Guess im lucky
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
Please do update if replacing the LCD does in fact get rid of the problem
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
dont think that actually helps - you'll prob need to replace the digitizer .
hello2004 said:
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
Click to expand...
Click to collapse
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
reflexivemedia said:
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
Click to expand...
Click to collapse
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
realazyjai said:
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
Click to expand...
Click to collapse
i assure you cannot replace just the lcd, not without a hammer! I got my old part back, I can take some pictures of it, just in case And the digitizer is one and the same with the front case... the diamond is a very small phone, that's why there are no screws or other stuff to hold together the lcd and the rest of the case.
So unfortunately for you, they may have told you they replaced the lcd, but i think they did nothing :|
It is very clear that we had the same problem... the digitizer itself got broken... not some cable or lcd
anyway, if your phone has warranty, you are a happy man
Anyone else who owns a Touch Cruise have their touch screen just stop functioning altogether? I came back to use my phone which was just sitting in the car and the touch screen no longer works...Obviously this did not happen due to being dropped, though it was a little warm nothing unusual by any standard.
All the hardware keys work, everything else...just the touch screen is dead. Has anyone else had this happen and if so were there any steps to reviving the screen or was replacing it an option, if so what did you do?
Free Man said:
Anyone else who owns a Touch Cruise have their touch screen just stop functioning altogether? I came back to use my phone which was just sitting in the car and the touch screen no longer works...Obviously this did not happen due to being dropped, though it was a little warm nothing unusual by any standard.
All the hardware keys work, everything else...just the touch screen is dead. Has anyone else had this happen and if so were there any steps to reviving the screen or was replacing it an option, if so what did you do?
Click to expand...
Click to collapse
I had this problem with mine, it was just to send it to their lovely repair center through the dealership since I still got my Warranty, they exchanged the front panel, witch senses the touching. Depending on where in the world you live you should be able to by a separate one, or get it repaired by them. I hope it solves for you...
Thanks, I am well out of the 1 year warrant and in the US, which is not even where this phone was originally warranted so there is no chance of that.
I believe the cost of repair outside of warranty, and the time it would take that I would be out of my phone would not be worth it. I am hoping that I could purchase a replacement screen and repair it myself...Anyone have any direction here to do so?
Let me clarify something in regards to the malfunction. The screen itself is still visible and I can see everything as I would normally on a fully functioning lcd screen...The screen simply does not respond to any touch!
Touch Screen stop
hi i install the wwe-hero-3g and it stop it say"Tap the screento setup the windows" my phone is a at&t 8525 so what can i do.
i have the exact same problem. makes the phone useless
Hi try getting into the screen set up, ie where you tap the screen on first boot. You can use the program "mymobiler" to operate the screen through the computer.
Hope this helps!!
Same ****..
Have the same silly situation. Can´t even install the above program as it is impossible to respond "yes" to question about installing.
Have just ordered a replacement digitizer from this source:
http://www.chinaontrade.com/advanced_search_result.php?keywords=htc+digitizer&categories_id=
Don´t know if I will be able to fix it and I have also ordered a new Iphone as
I´m getting tired of all the problems with my loved Touch Cruise.
Hello xda dev!
I bought a used One S z520, the seller said it's in very good condition, and there are no problems with it. When I finally got it, i noticed, that it really is in a good condition, no signs of use, the screen is clear, no scratches, even the outer shell shows no signs of use.
I turned the phone on, and wanted to connect to WiFi, but the keyboard wouldn't work on the left side (Q, A, Z, Shift etc). Then I noticed the touchscreen is dead on the whole left side. So I used ScreenTouch Test to determine where the dead spots are. And, well...
<PLEASE CHECK PICTURE IN ATTACHMENT>
This seemed very strange, because it doesn't look like these are random dead spots, but more like the screen calibration is way off... I tried resetting the calibration, but that did nothing. Then I went to the bootloader...
The bootloader was "LOCKED", but the phone was s-off and SuperCID'ed, yet it still was using a stock rom, which seemed strange to me, like someone did a hackjob returning the phone to a stock state for selling...
So here is my question: is it possible, that someone installed something wrong (I don't know, firmware, kernel, anything) and I can repair the touchscreen by replacing some part of the software? Or is it a hardware problem, and the touchscreen is dead and I should return the phone to the guy? I would much rather make it work, not go the easy way of returning, but if that is impossible...