[Q] VZW 4.04 Radio flashing - General Questions and Answers

After flashing the newest Verizon radios, I can no longer access the 'more' settings under wireless and networks. I did first revert to the 4.02 radio and bootloader before flashing the newest ones, and am suffering from no other issues. Thanks for the help!

Related

What radio is in a stock AT&T fuze rom?

I am returning a fuze for warranty, and flashed the AT&T code, which my understanding was had a radio included with it.
I restored the stock SPL as well.
Checking the boot screen I show 1.14.25.35 for the radio. Does that seem right?
I just restored the stock SPL and stock rom today as well. Same radio version as yours. Also received my refurb today and has the same radio version. All appears to be OK.

[Q] Help! Wifi won't turn on after otherwise successful root/custom rom

Samsung Nexus S I9023 (Australian stock)
Baseband version I9020XXKI1 (from bootloader screen)
Baseband version I9023XXKI1 (from System Settings>About phone)
Bootloader version I9020XXKL1 (from bootloader screen)
Kernel version 3.0.8-g6656123
I have been using my Nexus S I9023 with official OTA 4.0.4 (and 4.0.3 before update) with no wifi or network problems. Yesterday however I decided to unlock bootloader, gain root access and flash a custom rom for performance/battery life purposes. I flashed CyberGR-MOD v.11 with the stock kernel and radio with CWM, with no other add-ons flashed.
It went well except for the fact that wifi has not been able to turn on since the first reboot. The switch will attempt to slide to 'On' but flickers, and hangs on 'Turning Wi-Fi on..' It makes no difference whether the SIM is inserted or not, Wi-Fi just does not turn on. Under 'Advanced' WiFi settings, WiFi MAC address and IP address are both Unavailable.
I have been searching for fixes for the last day, such as the WiFix apk found on this thread (http://forum.xda-developers.com/showthread.php?t=1445766) but nothing has worked. I have tried flashing other ROMs, reverting to stock OTA 4.0.3 and relocking the bootloader to return the phone to stock, but WiFi will not turn on in any configuration.
Portable WiFi hotspot also will not work, with merely 'Error' being reported when I try to turn it on.
Is the disparity between bootloader/phone stats regarding baseband version an indicator that I flashed incorrectly? Is it a radio problem?
Would greatly appreciate some speedy responses as I cannot seem to find any solutions to this particular problem.
[EDIT] Fixed problem by installing new kernel, was not able to do this before as my version of CWM was bugged and required an update. From then on was able to flash new files, kernel was the answer!

[Q] flakey data connection after cyanogenmod rom flash

So I finally took the jump and rooted my T-mobile Sensation 4G (including unlocking the bootloader, sim-unlock, S-OFF, root, SuperCID, did I forget anything??). Flashed Cyanogenmod 9.1. Have CWM ROM Manager installed, and Titanium backup.
It works MUCH better than the stock ROM, and I'm very happy with it, EXCEPT, the radio's data connection (very fast when working) stops working for hours at a time. There does not seem to be any trigger for this. The regular non-data connection (phone calls and texts) continues to work. The H by the signal strength indicator will flash on periodically, maybe every few to 10 seconds at best, but you never actually get a connection. (3D and E do not appear at all). The signal strength is full. This happens both at home and out.
I thought it might be the radio, and after looking into that, decided to flash some new firmware. Initially (after the rooting/update), it was reporting firmware (from fastboot getvar version-main) of 1.24.401.1. On the boot screen, it said Juopunutbear (I used that method to get S-off). It was reporting baseband of 11.69A...
So I flashed the 3.33 universal firmware, and used the GetRIL app to update the RIL. It now reported firmware 3.33.401.106 and baseband 11.76A...
But no difference in data connection - not working at all.
So I flashed the 3.32 stock TMO firmware, used GetRIL again to get the right RIL. Now reporting firmware 3.32.531.14 and baseband 11.69A again.
But again, no dice on the data connection.
Wifi connection works fine, so I use that when in range.
Other current info:
bootloader screen:
HBOOT 1.27.1100 (this went down from 1.27.1111 version, which I think the HTC bootloader unlock installed).
Radio 11.23.3504.07_M2
eMMC-boot
firmware version:
3.32.531.14
From the running phone itself:
Android version: 4.0.4
baseband: 11.69A.3504.00U_11.23.3504.07_M2
kernel: 3.0.36-g7290c7f
Cyanogenmod version: 9.1.0-pyramid
The one thing I have not tried is to flash a different ROM than the Cyanogen...worth trying (any recommendations?) or another other ideas of what might be going on?
thanks!

[Q] New firmware or radio while S-On possible?

So I'm S-on. Hboot 2.15 and not on the supported firmwares to do s-off via moonshine. I'm can never run 4.2.2 or 4.3 roms because when my phone switches between 4g/3g/edge etc it drops service completely and i have to wait for it to restore. I'm on Mckinneys stock latest release of sense from a while back but my data speeds still seem to be incredibly slow and many times get page load errors etc.
I was wondering if it is possible to update my radio or firmware to a different one to see if that helps. Is that possible while still being S-on?
Any help is greatly appreciated.

4.4 19.5.3 Radio for Droid Maxx

I Hope this is the right place to post this question, If not I will repost elsewhere. I did a search for this but could not find much info.
So I successfully unlocked the bootloader on my Droid maxx via Sunshine, and decided to try some of the newer basebands. I'm running 4.4 19.5.3 stock rom, and the newest radios from here seemed to have messed up my bluetooth and wifi tether. I can't see bluetooth devices, and they can't find my device when discoverable is enabled. Also, wifi tether only works in the upper channels (149-165) Which I'm assuming is the 5Ghz band, but when I set it to any channel in 1-11, none of my wifi devices can see the network. Does anyone have the stock baseband for 19.5.3? I only see radios for 19.6.3, and the other radios for 4.4.4 cause my phone to display the "restriced access changed" error and I was unable to get any cellular connection. I think the solution is to go back to the baseband radio sw that came originally with 19.5.3, but I don't see any links for that version.
bayank said:
I Hope this is the right place to post this question, If not I will repost elsewhere. I did a search for this but could not find much info.
So I successfully unlocked the bootloader on my Droid maxx via Sunshine, and decided to try some of the newer basebands. I'm running 4.4 19.5.3 stock rom, and the newest radios from here seemed to have messed up my bluetooth and wifi tether. I can't see bluetooth devices, and they can't find my device when discoverable is enabled. Also, wifi tether only works in the upper channels (149-165) Which I'm assuming is the 5Ghz band, but when I set it to any channel in 1-11, none of my wifi devices can see the network. Does anyone have the stock baseband for 19.5.3? I only see radios for 19.6.3, and the other radios for 4.4.4 cause my phone to display the "restriced access changed" error and I was unable to get any cellular connection. I think the solution is to go back to the baseband radio sw that came originally with 19.5.3, but I don't see any links for that version.
Click to expand...
Click to collapse
Not sure its def. your problem, but I uploaded it here: http://d-h.st/Asa
Thanks for the reply, I just tried flashing that, and it made things worse, I was not even able to unlock my phone at startup and a lot of things were crashing, so I reverted to one that was semi-working. From the file description, it looks like that is for 4.2.2, so that may be the problem since I am currently on 4.4. Do you have anything else that could help? Otherwise, I think I need to flash a whole new rom.

Categories

Resources