My Gfit reboots whenever I enter USB mode or USB debug mode. Has anyone else encountered this problem? If so, is there an actual remedy to this other than reflashing my ROM because I am getting quite tired of that.
bump
On which base band out ROM you are...Coss there's some problem with dxt4 and xxkpu the latest version
oh. so that's the root cause then. I'm not sure which is mine. can you just recommend a good base band ROM so I can flash that instead.
Bro you just check which is your location ROM go to sammobile.com there many ROM check your place sometimes other area base band doesn't work properly I'm from India and for us ddkt3 is latest few days before I flashed dxkt7 latest ROM of Indonesia my phone rebooted in infinite loop finally some how selecting and trying every time I could get it work than I tried xxkpu latest ROM for Russia had same problem still I'm on that xxkpu cuz its working n don't want to flash again as IM on creeds ROM so but will soon change to ddkt3 again when I get windows lappy
androidnandroid said:
Bro you just check which is your location ROM go to sammobile.com there many ROM check your place sometimes other area base band doesn't work properly I'm from India and for us ddkt3 is latest few days before I flashed dxkt7 latest ROM of Indonesia my phone rebooted in infinite loop finally some how selecting and trying every time I could get it work than I tried xxkpu latest ROM for Russia had same problem still I'm on that xxkpu cuz its working n don't want to flash again as IM on creeds ROM so but will soon change to ddkt3 again when I get windows lappy
Click to expand...
Click to collapse
before flashing dxkt7 clear cache and data ... i was also facing the same problem but after this it's working fine ..
Ya bro did that than only it worked ....but was reading a forum about base band in that it was mentioned that you can face problem in network reception and wifi problem if on different base band
Okay tried flashing an alternate baseband ROM (DXKT7) the latest at sammobile for asia region. At first I got stuck at an infinite boot loop, then I went to recovery and cleared the cache, did a factory reset, then it worked. I'm going to flash CWM by tj style then the miui ROM afterwards, I hope this solves the problem permanently. Will try activating USB mode/ USB debug as soon as I'm done flashing.
There is a usb bug in miui gb...
Sent from my Galaxy S III using xda premium (really, I'm not kidding)
kurokawalove said:
Okay tried flashing an alternate baseband ROM (DXKT7) the latest at sammobile for asia region. At first I got stuck at an infinite boot loop, then I went to recovery and cleared the cache, did a factory reset, then it worked. I'm going to flash CWM by tj style then the miui ROM afterwards, I hope this solves the problem permanently. Will try activating USB mode/ USB debug as soon as I'm done flashing.
Click to expand...
Click to collapse
Flash some other rom and check whether usb mode is working or not
Related
I flashed my kernel to utterchaos v8 no oc a month ago. Today i wanted to flash it to a stock one and i screwed all things. I dont know why but i used odin with only laguna pit and my phone started into recovery mod. i couldnt recover it and i entered the download mode with 3 button after power off. Then i wanted to make this freakin phone work with flashing back to the stock firmware. But no use.I thought it worked as odin says it had passed but it stuck on welcome screen. Now it says only samsung and 1 step away from starting the phone. Pls help me. My phone was XXKPQ 2.3.6 Russian model.
now I want to flash to 2.3.6 model. PLS HELP ME....
This is my first android phone. Pls help me. I wanted to change things but i screwed everything. PLS HELP
Reshad127 said:
I flashed my kernel to utterchaos v8 no oc a month ago. Today i wanted to flash it to a stock one and i screwed all things. I dont know why but i used odin with only laguna pit and my phone started into recovery mod. i couldnt recover it and i entered the download mode with 3 button after power off. Then i wanted to make this freakin phone work with flashing back to the stock firmware. But no use.I thought it worked as odin says it had passed but it stuck on welcome screen. Now it says only samsung and 1 step away from starting the phone. Pls help me. My phone was XXKPQ 2.3.6 Russian model.
now I want to flash to 2.3.6 model. PLS HELP ME....
This is my first android phone. Pls help me. I wanted to change things but i screwed everything. PLS HELP
Click to expand...
Click to collapse
Try to reflash firmware using odin.
Maybe i do reflashing wrong.
I do
1) Going in to download mode
2) opening odin v 182
3) selecting pda xxkpq.tar.md5
4) unchecking repartition
5) start
then everything works and it says passed
but when it restarts it stucks in the startup samsung doing and doing the same startup screen with intervals
Reshad127 said:
Maybe i do reflashing wrong.
I do
1) Going in to download mode
2) opening odin v 182
3) selecting pda xxkpq.tar.md5
4) unchecking repartition
5) start
then everything works and it says passed
but when it restarts it stucks in the startup samsung doing and doing the same startup screen with intervals
Click to expand...
Click to collapse
After this, flash utterchaous v9 1009 and go to recovery and wipe all.
Then reflash.. Kpq using odin.
where can i find utterchaous v9 1009 ?
I said i am nooooooooooooobbbbbbbbbb))) i am stupid)))
Reshad127 said:
where can i find utterchaous v9 1009 ?
I said i am nooooooooooooobbbbbbbbbb))) i am stupid)))
Click to expand...
Click to collapse
In the android development section of i9003..
Bro first download XXKPE from here
http://forum.xda-developers.com/showthread.php?t=1004647
Then follow the guide to flash XXKPE here
http://forum.xda-developers.com/showthread.php?t=1133787
Then follow the guide to flash XXKPQ again from here
http://forum.xda-developers.com/showthread.php?t=1133787
just enter into download mode.then flash xxkpe (all options wid repartition checked)just allow it to be booted till the homescreen and then again go into diwnload mode and flash xxkpq(repartition unchecked)
I installed utterchaos v9 1009 and it worked. But it started with factory default settings. But the problem is everytime the phone turns on it starts with factory default settings. every time asks me to choose locale, languages and e.t.c.
I will try flashing to xxkpe
Are you sure that the Factory Settings issue wasn't caused by you flashing XXKPE first then XXKPQ?
Try reflashing again.
!n0x said:
Are you sure that the Factory Settings issue wasn't caused by you flashing XXKPE first then XXKPQ?
Try reflashing again.
Click to expand...
Click to collapse
No I hadn't flashed to XXKPE then.
THANKS TO ALL OF UUUUUUUUUUUUUUUUUUUUUUUUUUUUUU> U ARE GREAT)
THANK YOU devilhell007 for providing links, i am new to this forum.
I APPRECIATE IT)
@rsehad127
You will only get the select locale etc just once....
Do not factory reset everytime.
I know the problem here. You flashed from UC kernel , and you must have a partition that was converted to EXT4. you then flashed stock kernel but of course your phone will not boot after that, because stock kernel does not support EXT4 format. after you flashed stock kernel you should go into recovery menu and wipe/factory reset, so the partition will go back to default format, and you can still retain stock kernel.
Delete this message I dont know how I didnt read above that you already got your solution
BassBlaster said:
I know the problem here. You flashed from UC kernel , and you must have a partition that was converted to EXT4. you then flashed stock kernel but of course your phone will not boot after that, because stock kernel does not support EXT4 format. after you flashed stock kernel you should go into recovery menu and wipe/factory reset, so the partition will go back to default format, and you can still retain stock kernel.
Delete this message I dont know how I didnt read above that you already got your solution
Click to expand...
Click to collapse
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format
devilhell007 said:
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format
Click to expand...
Click to collapse
I guess if you repartition it will be reverted
Cheers
Sent from my GT-i9003 powered by MIUI
devilhell007 said:
Correct me if im wrong , but as far as i know every time you flash stock firmware through odin your partition is automatically converted to rfs format
Click to expand...
Click to collapse
Not until u use latona.pit file with xxkpe. To get back to rfs, u need to flash xxkpe.
Sent from my GT-I9003 using xda premium
While flashing with odin (stock rom) , it was stuck in the middle ..Waited for longtime no progress so took off and retried flashing nothing happened..
If i go to cwd mode(volume+up) it says me "encountered problem while updating firmwire, use kies to do recovery"
Now what can be done?...Please help...Is it totally bricked ?,any other options can i try./?
just boot in download mode (VOL DOWN + HOME + POWER) and flash FW again it will be resolved just with that.
roonie said:
While flashing with odin (stock rom) , it was stuck in the middle ..Waited for longtime no progress so took off and retried flashing nothing happened..
If i go to cwd mode(volume+up) it says me "encountered problem while updating firmwire, use kies to do recovery"
Now what can be done?...Please help...Is it totally bricked ?,any other options can i try./?
Click to expand...
Click to collapse
Flash stock ROM again using ODIN by going to Download mode as said by xlm13x ...
Download the china stock ROM, it has all the three files the pda, modem and the csc. It also has the pit file. Flash on ODIN.
Once you do this your phone will definately boot up. Once this is done you can flash any country stock rom through ODIN.
It also happened to me once and the thing i just mentioned worked for me. So 100% sure on this.
Sent from my GT-I9103 using xda app-developers app
its really good to see people helping each other so fast
sandyisgood said:
Download the china stock ROM, it has all the three files the pda, modem and the csc. It also has the pit file. Flash on ODIN.
Once you do this your phone will definately boot up. Once this is done you can flash any country stock rom through ODIN.
It also happened to me once and the thing i just mentioned worked for me. So 100% sure on this.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Post the link for that.
Sent from my GT-I9103 using xda premium
Thanks a lot guys that was a fast helping hand it worked after 3-4 tries..
One more thing I have Baseband version-I9103DDKH4
Kernel Verssion - [email protected]
Build number:GINGERBREAD.XWKI5
this is the stock version i flashed now...
Can now i flash neo romv3 from this link
http://forum.xda-developers.com/showthread.php?t=1769863
It denotes XWLA4 2.3.6 ...is it region specific?...can i flash with my version is it compatible?..
roonie said:
Thanks a lot guys that was a fast helping hand it worked after 3-4 tries..
One more thing I have Baseband version-I9103DDKH4
Kernel Verssion - [email protected]
Build number:GINGERBREAD.XWKI5
this is the stock version i flashed now...
Can now i flash neo romv3 from this link
http://forum.xda-developers.com/showthread.php?t=1769863
It denotes XWLA4 2.3.6 ...is it region specific?...can i flash with my version is it compatible?..
Click to expand...
Click to collapse
The kernel version you quoted contains 'XWKI5' which is the code for Indian stock firmware.
For using Neo ROM you'll have to flash the XWLA (European stock firmware) on your Galaxy R & then flash the Neo ROM 3.0. And yes you can flash the stock firmware of any region it'll be compatible & won't create issues as long as you're flashing stock ROMs by Samsung for Galaxy R.
Do update here on how it goes.
Hope this helps
'cooleagle' said:
The kernel version you quoted contains 'XWKI5' which is the code for Indian stock firmware.
For using Neo ROM you'll have to flash the XWLA (European stock firmware) on your Galaxy R & then flash the Neo ROM 3.0. And yes you can flash the stock firmware of any region it'll be compatible & won't create issues as long as you're flashing stock ROMs by Samsung for Galaxy R.
Do update here on how it goes.
Hope this helps
Click to expand...
Click to collapse
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?...
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
roonie said:
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?
Click to expand...
Click to collapse
Yes you can reflash our Indian stock 2.3 5 ROM anytime you want, reset your custom firmware counter & claim warranty for your handset, be careful while doing the same cause if you screw up / miss some steps then you could loose your warranty.
roonie said:
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
Click to expand...
Click to collapse
Kernel v 1.8.3 is compatible with XWLA4 / XWKI5 (There could be some bugs with XWKI5 but there's no harm in trying as long as you follow the steps) can also be used with Neo ROM.
Try the newer version of his kernel here, it has been improved a lot since then: http://forum.xda-developers.com/showthread.php?t=1787454
Before you start flashing any ROMs & kernels I would suggest you to read all the threads stickied in the Dev section, FAQ's & How To's in my signature below, if you haven't already done it & don't forget to take a nandroid backup.
It is to understand the various steps you need tu know to go about flashing kernels, ROMs, etc & also how to clear the counter to claim warranty.
Cheers !
roonie said:
Thanks cooleagle...So if i plan to install the neo rom , i have to reflash with the stock rom of XWLA4 rite?...So will it affect anythin because iam in india and i am changing the stock rom to other region?...after i flash if i want to get back to stock rom of my region can i reflash with my stock rom of indian region from euro region stock rom?...
And also can you tell me about http://forum.xda-developers.com/showthread.php?t=1418895 [Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) ?..what this is all about?...can i upgrade the kernel too after upgrading to XWLA4 and also if i want to do the kernel upgrade in XWKI5 can i do it?
Click to expand...
Click to collapse
Yes for Neo ROM, u have to flash Stock rom of XWLA4 via odin.It will not affect anything but u need to wipe data after flashing. So take a backup of all ur data and then flash it. Apart, it wont affect anything buddy. Yes u can revert back to Indian stock rom at any point of time.
And with kernel, Neo ROM by default has ardatdat kernel 1.8.1 and so u will get that kernel when u flash Neo ROM. After that u can flash ardatdat's kernel 1.8.3 as it has RAM hack and its better than its prev versions. Yes u can upgrade, better to say u can change the kernel at any point of time. Have a Happy Flashing.
selva.simple said:
Yes for Neo ROM, u have to flash Stock rom of XWLA4 via odin.It will not affect anything but u need to wipe data after flashing. So take a backup of all ur data and then flash it. Apart, it wont affect anything buddy. Yes u can revert back to Indian stock rom at any point of time.
And with kernel, Neo ROM by default has ardatdat kernel 1.8.1 and so u will get that kernel when u flash Neo ROM. After that u can flash ardatdat's kernel 1.8.3 as it has RAM hack and its better than its prev versions. Yes u can upgrade, better to say u can change the kernel at any point of time. Have a Happy Flashing.
Click to expand...
Click to collapse
Want to ask you one thing ,
...When my phone crashed last time all apps crashed , I was not able to go to homescreen so i tried restore using cwm with my backup but after restoring it was stuck in Samsung logo at the boot itself...This has happened all times when i tried to restore..Why this happened...how can i restore to my previous state with that backup..My phone had crashed atleast 4 times and the restore had never worked ,dont know why it had happened(this all happened after i rooted my phone)....
roonie said:
Want to ask you one thing ,
...When my phone crashed last time all apps crashed , I was not able to go to homescreen so i tried restore using cwm with my backup but after restoring it was stuck in Samsung logo at the boot itself...This has happened all times when i tried to restore..Why this happened...how can i restore to my previous state with that backup..My phone had crashed atleast 4 times and the restore had never worked ,dont know why it had happened(this all happened after i rooted my phone)....
Click to expand...
Click to collapse
Buddy. Whats the ROM u were in when u took the backup in CWM and while in which ROM u tried to restore the CWM backup
selva.simple said:
Buddy. Whats the ROM u were in when u took the backup in CWM and while in which ROM u tried to restore the CWM backup
Click to expand...
Click to collapse
Till now i was using XWKI5 stock rom...I had made backup of the stock rom only , and tried to restore (because it got corupt ) , after restore it was stuck at the samsung logo...Anyways everythin is gone , iam just plannin to flash neo rom
Really frustrated.. now for the past 2 days was trying to flash CM9 Alpha 11... Earlier it was battery drain issue.. then I did a clean install... then FREEZING ISSUE STARTED when on CM9 (DDLF2 working fine).. after that phone was not getting on... Now today its gettin on but only download mode works.. Recovery mode not coming.. I have tried flashin XXKPE then DDLF2. nothing works... Phone still cant open recovery mode and is not also getting on.. on the SAMSUNG GALAXY SL LOGO COMES at the phone doesnt proceed further from there.. Also sometimes when logo goes > KERNEL UPLOAD PANIC MODE comes written on the screen.
CURRENTLY ONLY DOWNLOAD MODE WORKING
anuragvivek93 said:
Really frustrated.. now for the past 2 days was trying to flash CM9 Alpha 11... Earlier it was battery drain issue.. then I did a clean install... then FREEZING ISSUE STARTED when on CM9 (DDLF2 working fine).. after that phone was not getting on... Now today its gettin on but only download mode works.. Recovery mode not coming.. I have tried flashin XXKPE then DDLF2. nothing works... Phone still cant open recovery mode and is not also getting on.. on the SAMSUNG GALAXY SL LOGO COMES at the phone doesnt proceed further from there.. Also sometimes when logo goes > KERNEL UPLOAD PANIC MODE comes written on the screen.
CURRENTLY ONLY DOWNLOAD MODE WORKING
Click to expand...
Click to collapse
that's good news buddy that you can still go to download mode! flash a stock firmware first to make everything stable.. and then root, and then flash your long-awaited custom rom. also, don't forget to wipe dalvik cache BEFORE you install the custom rom
If u can't get into recovery using the 3 button combo, then there must something wrong with your volume keys. Flash stock rom & check whether it is working.
Sent from my GT-I9003 using xda app-developers app
Try to flash a stock ROM, then everythink will go stable
and dont flash one file fw.
go for xxkpe first then for any other..
I know that this is not related the this thread but plzz answer.
I am currently on cm9 alpha11.the version is 4.0.4.
Now I found aokp rom which is 4.0.3
Can I directly flash to aokp rom using CM recovery or should I do something else? Plzz help :/
Sent from my GT-I9003 using stable and smooth Cyanogen Mod 9
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
anoopgkris said:
i'm stuck in an endless bootloop after trying to upgrade the CM10 Beta 4 version on my Samsung Galaxy S Plus.
This is what i did
I'd upgraded from 2.3.3 to 2.3.6 some months ago. Then flashed CM10 Beta 4 by ivendor.
For this i first downloaded the CWM -> recovery-clockwork-5.5.0.4-ariesve.tar.md5 and flashed it using Odin.
Then the ROM file -> cm-10-20130324-ivendor-beta4-ariesve.zip
Was checking the updates on this and found much advances in the 2.5 release of 2 May 2013.
So downloaded the CWM -> CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5. When i tried to flash using Odin it gave me the MD5 error.
Saw somewhere on the forum to flash using zip file, so downloaded CWMRecovery-6.0.2.8-ariesve-kernel26.zip and tried to flash. This was when my phone got soft-bricked.
Removed the cable, battery etc. After some time, was able to go into Download mode but not Recovery.
Then i tried to flash to stock ROM (2.3.6) - I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5. This completed and Odin said PASS. But the phone now goes into a bootloop. Tried the Recovery mode but after the Android-out-of-the-box symbol it again said SAMSUNG and started the boot. This is repeating continuously. What should i do now? Please help.
This is the sequence of things...
1) 2.3.3 to 2.3.6 - Success !!
2) Flash with CM10-Beta 4.a) recovery-clockwork-5.5.0.4-ariesve.tar.md5 - OK
b) cm-10-20130324-ivendor-beta4-ariesve.zip - Success!!!
c) gapps-jb-20121011-signed.zip - Success!!3) Flash with CM10-Release 2.5a) CWMRecovery-6.0.2.8-ariesve-kernel26.tar.md5 - MD5 checksum error !!
b) CWMRecovery-6.0.2.8-ariesve-kernel26.zip - Soft-bricked !!!4) Flash stock ROM (2.3.6) a) I9001XXKQI_I9001XXKPM_I9001OXFKQ3_HOME.tar.md5 - PASS
Bootloop
Cannot go into Recovery mode too (after Recovery mode icon appears SAMSUNG logo comes up and phone boots with the blue spiral, this goes into a continuous loop)
Click to expand...
Click to collapse
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Will try this
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
Thanks, will try this tonight
I already took the Nandroid backup before flashing CM10 Beta 4. But was not able to go into it after my phone was soft-bricked.
Solved - booted into 2.3.6 !!!
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
A million thanks!! It somehow started now into the 2.3.6.
Flashing the recovery-clockwork-5.5.0.4-ariesve.tar.md5 did not solve the bootloop. Then i flashed the Boot_loader.tar. That too did not solve the bootloop. Tried Recovery mode again but the SAMSUNG logo kept coming and going until i released my fingers after a full two minutes. Then before the android-out-of-the-box icon came it went straightaway into Recovery .
Wiped Data and Cache and rebooted. After a very very long time it started and asked if im okay with the Google data collection policy asked in Polish language.
Wow, going to update to 4.1.2 Release 2.5 in some time.
Thanks again man. :good:
Got CM10 Beta 4 again !
parkourkarthik said:
AFAIK, CM10 would have already consisted of the latest CWM, so there is no need of u to flash a CWM again over it!
Ur biggest mistake, u MUST have had a nandroid backup before doing anything to ur phone! This might have been even recommended by the thread of the CM10.
So my last suggestion from the things that u have done, flash the CWM through odin if possible right now and if successful get into recovery mode and wipe data & cache and check whether the bootloop is gone.
Else try reflashing the stock firmware.
If that doesn't even help, get help from the devs related to ur device through PM.
If hopeless still, then hit a samsung service center near u
Hit thanks rather than typing it
Click to expand...
Click to collapse
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
anoopgkris said:
All went smooth. CM10 Beta 4 is back on my SGS+.
Thanks for the advises and help
Click to expand...
Click to collapse
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
[SOLVED] Bootloop problem after soft-brick
parkourkarthik said:
U got it man:victory:
It's good that u posted the way u solved it! so that it would help others who face the same problem
BTW add the word [solved] in ur thread topic..
Hit thanks rather than typing it
Click to expand...
Click to collapse
Sure, thanks !!
Also pasting here an easter egg that i saw after loading Gingerbread 2.3.6 before this CM10.
Putting this because i tried this for the first time in GB (the seven times click on android version)
hello i am new to xda and just created a thread for help about my problem. I flashed razodroid v4 one day and thought of flashing jb 4.2.2 touchwiz rom. I flashed it and it worked fine for some days, then i thought of flashing sd-ext patch and it also worked fine with my ext4 sd card.
one day when i was tired of my slow phone, i installed the badass kernel and it installed succesfully and worked for some hours.....
after that the phone turned off suddenly and never went on always went to the text Galaxy Fit GT-S5670 and then nothing..
then i flashed the froyo official stock rom from odin it worked fine but there the recovery was showing the following problem and i was not able to flash any rom from recovery from that day.....
plzzz help me from this problem i want to upgrade to android 4.3 i am now having the gingerbread stock dxkt7 that i flashed from odin.
Reflash latest 2.3.6 [Gingerbread] firmware using odin --> Wipe everything --> Flash CWM --> Flash your desired ROM following all instructions perfectly..It should solve all problems..
Btw why you had flashed froyo firmware..?
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329
dindnt help!!!!!
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin
ritikbanga said:
it didnt help still stuck on the Galaxy Fit text. now I have to reflash gingerbread from odin
Click to expand...
Click to collapse
The first step I told you is that only..Reflash stock GB 2.3.6 using Odin..-_-
Hit Thanx If I helped U
Bootanimations for MDPI Devices
http://forum.xda-developers.com/showthread.php?t=2126329
that was the first step only......
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......
ritikbanga said:
i did followed the procedure by flashing gb from odin and wiping everything. but that didnt worked so i did flashed gb from odin once more.....................
thanks for your response but the problem is still there......
Click to expand...
Click to collapse
After flashing stock Gingerbread goto stock recovery, wipe data/factory reset and it will boot, have patience.
Flash the CWM v5 (via odin) by tj style, cwm v6 is slow and buggy
problem still persists......
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........
ritikbanga said:
thanks for the help but the problem is still in cwm v5. :crying:
lease help as i want to flash android 4.2 soon.........
Click to expand...
Click to collapse
The certain errors u r seeing in cwm recovery will disappear when u flash ny custom rom. They r only visible under samsung official stock rom.
Edit: & do format /system b4 flashing custom rom for the 1st time over stock otherwise u will get hanged at the android-text/boot-up screen forever...remember that..!!
no luck yet!!!!!!!!!!
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............
ritikbanga said:
no method is working on my galaxy fit i try to flash custom roms everyday but it is always stuck on the Galaxy Fit tex. I did wiped system too this time but it didnt help.............
Click to expand...
Click to collapse
Oh Bro!! Now I saw ur SS carefully (by zooming). Don't use this recovery by dany... Always use cwm recovery by tjstyles v5.0.2.7.
Now it should definitely work coz I have it already...:thumbup:
Hope this helps...!!!
not working.....
thanks for the reply but i did flashed it with cwm 5 by tj styles before.......
and it is not rebooting.
only able to flash through odin....
problem solved!!!!!!
problem is solved now