I have successfully flashed the flufy_tendo 6pack ROM ( Android 4.4.2 kitkat v1.5.4 AROMA ) on this device and everything is almost ok.
The only problem y have is this one : I can´t connect the mobile with the PC ( Windows 8.1 64 bit ) via USB ( only charge mode is allowed ).
I had a similar problem with a previous ROM (EMUI 2.0 ASAP from flufy_tendo) but connecting the mobile to a PC with windows XP I was able to solve the issue.
Now is impossible to connect via USB, Wifi, PdaNet+ and so on in both operating system.
I´have tried to reinstall drivers in various way without success ( also as suggested here: http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773 ).
Do you have any idea ?
Thanks in advance.
Hello Specialists!!
I have an really big problem with my phone: "SM-J700F"
I am not able to connect via odin or kies to this one.
But in windowes explorer (Win7 64bit) everything is visible.
In MTP Mode, Usb-Storage and PTP mode.
Also I can acess to the phone via the explorer.
But not with odin and/or Kies.
I tried to installit several times (Kies also Kies3)
Then I tried another win7 computer, but with same result.
The reason is, i wont to root the phone, because of low memory, even after reseting to factory.
I hope really a lot that there is an solution!!!!
Many greetings
Robert
Additional information odin
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
hook02 said:
Hello experts!!
Some additional information what I found out:
When I connect my Samsung Galaxy S5 Neo, everything is working.
So I compared the used driver for both phone (S5 is OK), (J7 is not) in the device manager of windows.
So below you see the entries when the phone is connected:
S5 Neo - OK:
-Modem: Samsung Mobile USB Modem
-Samsung Android Phone: Samsung Android ADB Interface
-Tragbare Geräte: Galaxy S5 Neo (translated means: carryable device)
-USB Controller: Samsung Mobile USB Composite Device
Same with J700F - Not OK:
- Modem: entity is not existing ---> difference
-Samsung Android Phone: Samsung Android ADB Interface ---> is equal
-Tragbare Geräte: full_tangxun6572_we_I ---> different, is the Name whitch is visible in windows explorer
-USB Controller: USB Verbindungsgerät (translatet: USB Connection Device) ---> different (this Entity is already existing, even when no phone is connected)
So I tried to update exactly this driver with the downloaded one from Samsung. For this I had to use no compactible hardware.
When I select almost all INF driver, the right driver was visible during installation, but it could not start (code 10)
I think this is somehow the problem.
With the driver "USB Verbindungsgerät" on the windows side everything is OK. Copy to phone, explore,...
But I think that Kies and Odin don't find the acces point to the USB samsung device....the bridge to this device.
Maybe there is an possibility go give odin an additional command, where odin connect to the right port (_#0006) and HUB (_#0004) which I see in the USB Verbindungsgerät....
Do you can help me please!!!!
BR and good night
Hook
Click to expand...
Click to collapse
Hello, Please what I should try?
BR
Robert
Try this maybe this would help yah connecting thru odin... settings > developers option > able OEM unlock
---------- Post added at 07:38 AM ---------- Previous post was at 07:33 AM ----------
Rooting J7, download a compatible twrp n superuser zip file on XDA, and place the superuser in yur device, then flash twrp via Odin( wait 2 to 4 minutes then Pass appears n yur phone reboots) then go to recovery mode then install superuser.zip
I don't know - not working at all
Hello!
Thanks for supoort!
Yes, I tried always: developer options on and OEM unlock. (on 2 Computers with win7)
But there is on both no entity below ID:COM in odin.
So there is no nonnection... (also in windows, when phone is normal connected (not via download mode) there is no connection from ODIN and KIES)
Bute another phone Galaxy S5 Neo is working.
Shi.....
Many thanks for support!!!!!!!!!!
BR
Hook
Can anybody support me
Hello
Is any possibility for helping?
BR
Robert
Some News
Hello!
What I found out:
When I use *#0808#
There is SP selected and RNDIS+ACM+DM+ADB
Bit when I select MTP+ADB the other one is not deselected and I cannot continue?
Means with OK - no function and Reboot - no function (then both are selected....!)
Do you can support me here?
BR
Hook
samsung note 2
- mtp working but can't detect on kies,smart switch,sync driod
- driver installed to pc
- usb debugging mode on/off
- 4 cables changed
done everything still can't connect to those to make an backup :crying:
OK FINALLY SOLVED !!! after reinstall Android ADB Interface Drivers.
I've downloaded the ISO for Bliss OS 11.13 (64bit for Intel Atom processor), created a Live USB using Rufus on Win10 and am trying to figure out how to install it to the my Dell Venue 8 7840 (running Android 5.1, unlocked and rooted). But the installer doesn't recognize there's an android tablet connected via usb.
I've ensured that the my Dell Venue 8 7840 (unlocked, rooted running Android 5.1) has both the MTP Dell drivers as well as the ADB drivers in Windows 10 and I can launch a terminal and run typical ADB/Fastboot commands and the device responds.
I've tried using all of the available "Allwinner" usb tools (PhoenixSuit, Phoenix USB Pro and LiveSuit) but none of these will accept the iso file I've downloaded directly from the Bliss OS site. Am I doing something wrong? My tablet isn't supported by CWM/TWRP or any of the major custom ROMS (LineageOS etc) so I can't update passed the current Android 5.1 as Dell no longer manufactures Android tablets.
Please tell me if anyone has been able to successfully install Bliss OS on an Intel Atom based Android tablet
Thanks
any update on this?
I am trying to extract all of the old, deleted pictures and videos and I can't find any way to get the drivers necessary to start. Please help. there were irreplaceable photos and videos in that phone that could possibly be recovered.
no need to root the device. just install TWRP
[RECOVERY][golden] TWRP 3.x
TWRP 3.x for Samsung Galaxy S III mini aka. Samsung Golden About F2FS: F2FS is supported on latest TWRP by default. Download http://andi34.github.io/recoveries_golden.html Sources Device & Kernel Source: https://github.com/andi34...
forum.xda-developers.com
then pull the files from adb with platform-tools
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
drivers here
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com