Database Info

[Q] DDKC1 to XXKPE

Hi Experts,
Can anyone please let me know whether i can directly flash from DDKC1 to XXKPE,if not please let me know how to do it.
Many Thanks

You can but flash XXKPE twice
Sent from my GT-I9003 using XDA App

ronhoover88 said:
You can but flash XXKPE twice
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
Thanks Ronhoover,
Actually i want to install XXKPN.
Will upgrade to XXKPE using odin, will flash twice
then XXKPN
Please correct me if am wrong.

[email protected] said:
Thanks Ronhoover,
Actually i want to install XXKPN.
Will upgrade to XXKPE using odin, will flash twice
then XXKPN
Please correct me if am wrong.
Click to expand...
Click to collapse
Yeah flash XXKPN also twice to fix csc
Sent from my GT-I9003 using XDA App

Thanks alot for the help.

samsung galaxy s 4g Unlocking problem

Hi
i have a Samsung galaxy s 4g running 2.2.1 FROYO.VUVKD1. I alreday did root my phone with superoneclick, then trying to unlock with software sim unlock free but error show "You have busybox fix it. Or if you have pluggued your phone on your computer unplug it. but its already unplug..please help me how can i unlock my one.

Make a backup of your /efs folder before you do ANYTHING ELSE!

Click on "sgs4g unlocker" in my forum signature
Sent from my SGH-T959V using XDA App

Error
Sent from my SGH-T959V using XDA App

Can you be more specific than 'error'? What exactly happened?

You definitely didn't follow the instructions.
Sent from my SGH-T959V using XDA App

I'm trying to save efs, but error show not saved
Sent from my SGH-T959V using XDA App

Click on the first guide in my signature. I have one way to back up the efs folder in there.

Still same error .. I want install a new rom gingerbread.. Please help me. How can I do that?
Sent from my SGH-T959V using XDA App

openlion said:
Still same error .. I want install a new rom gingerbread.. Please help me. How can I do that?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Take a look at the Installing A ROM part of the Wiki

stephen_w said:
Take a look at the Installing A ROM part of the Wiki
Click to expand...
Click to collapse
Thanx for help...i install the gingerbread and now i'm trying root the phone but superoneclick show wait for device the not responding and shut down..please help me how can i root my phone?

Anyone know how can I root my phone. Now running 2.3.6 gingerbread..please help me?
Sent from my SGH-T959V using XDA App

Make sure you have USB debugging checked under apps/development, that's one cause for superoneclick freezing if I remember right.
Sent from my SGH-T959V using xda premium

I did but still samething? Anyone know other way ?
Sent from my SGH-T959V using XDA App

openlion said:
I did but still samething? Anyone know other way ?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Install the pre-rooted rom listed in the dev section. Really is no use in rooting when Samsung lets use flash the phone with custom roms via odin.

Bhundven's One-Clicks in the Dev section are excellent. All are based on KJ6 and two are already rooted.
Sent from my SGH-T959V using xda premium

Where can I find root ROM?
Sent from my SGH-T959V using XDA App

Please help me..where can I find a root ROM for my phone ?
Sent from my SGH-T959V using XDA App

openlion said:
Please help me..where can I find a root ROM for my phone ?
Click to expand...
Click to collapse
Most of the ROMs in the dev section are rooted. What ROM are you currently running?
EDIT: It says above you are on GB 2.3.6. If you are - SuperOneClick V2.3.3 will work. Go to this thread, read the OP - all of it - hell watch the video if you need to, then go here and download the current version. And lastly be patient while it is running.
You can also read this thread for EASY ways to flash kernels once rooted and get on custom ROMs.
I encourage you to READ THE WIKI BEFORE DOING ANYTHING TO YOUR PHONE!
KJ6-Rom-CWM-Offical-GB-2.3.6 (Rooted)

I rooted my phone with superoneclick but I cannot unlock my phone...still busybox box problem?
Sent from my SGH-T959V using XDA App

is my phone dead for good?

i tried to unroot my sensation using this method:
http://theunlockr.com/2011/10/03/how-to-unroot-the-htc-sensation-4g/
i completed everything and now my phone will not turn on at all
can this be fixed?

shehade08 said:
i tried to unroot my sensation using this method:
http://theunlockr.com/2011/10/03/how-to-unroot-the-htc-sensation-4g/
i completed everything and now my phone will not turn on at all
can this be fixed?
Click to expand...
Click to collapse
There is an unbrick thread in the dev section, try the instructions on there. It should work for you.

I'll give it a shot thank you for the reply
Sent from my SGH-T999 using xda app-developers app

No signal after sim unlock

I have unlocked at&t sgh i727 by purchasing code at cellunlocker.net..
It was done successfully,. It prompted that SIM unlock successful. But later I'm not getting signal (just a circle with slash)... I have got apn settings too.. Tried switching on/off airplane mode, pulling battery out n waited for sometime then booted up. No luck.
Its brand new phone, with stock firmware etc, everything new.
I'm in India now, inserted Vodafone SIM which asked for SIM unlock code n it said unlock successful...
Pls help me guys.
Sent from my ST15i using xda app-developers app

what frequency does voda use, might need to flash a diff radio or do *#2263#

Are you on Gingerbread or ICS? Try flashing Gingerbread.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I'm new to this, can u pls detail it.
What should I do after *#2263#
Sent from my ST15i using xda app-developers app

I'm on gingerbread as I said u it was brand new.,
Sent from my ST15i using xda app-developers app

vincom said:
what frequency does voda use, might need to flash a diff radio or do *#2263#
Click to expand...
Click to collapse
I have googled some time n found that our frequencies lie under 900/1800. So I put the band preference to that frequency. But still couldn't get the signal.
Sent from my ST15i using xda app-developers app

Is there any way out, im out of my mind..
Pls help me
Sent from my ST15i using xda app-developers app

are you do a factory resert? sometime help. thats happened to me and I flashing a stock rom from SamFirmware.

eggypadua said:
are you do a factory resert? sometime help. thats happened to me and I flashing a stock rom from SamFirmware.
Click to expand...
Click to collapse
I hav done factory reset but no use,
Have u got the same problem after unlock.., did flashing stock rom solved it,??
Can u pls give me the link for firmware.
Thanks in advance
Sent from my ST15i using xda app-developers app

vincom said:
what frequency does voda use, might need to flash a diff radio or do *#2263#
Click to expand...
Click to collapse
Done it... thanks to u.. flashed different radios... n one worked...
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Which one did you flash im having the same problem
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Grover289 said:
Which one did you flash im having the same problem
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Im on embryo 6.1 right now.. im using ucll3 radio..
Which rom are u using?
Sent from my SAMSUNG-SGH-I727 using xda premium

LG G2X soft bricked

I have an LG G2X with a stock Gingerbread 2.3.4. The other day I tried to upgrade using HellFireSandwich. After the step where I wiped the Dalvik Cache, I choose the upgrade folder from my SD card and hit Reboot. The phone rebooted and now is stuck on the blue LG image. I tried all kind of fixes from the internet, youtube, etc. I even tried ODIN but no success. The phone is not in warranty anymore.
What should I do, if there is anything that can be done to fix it?

Follow the directions on this thread:
http://forum.xda-developers.com/showthread.php?t=1248644
Sent from my LG-P999 using xda premium

It worked!
It worked! Thank you very much!
Волк said:
Follow the directions on this thread:
http://forum.xda-developers.com/showthread.php?t=1248644
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse

Волк said:
Follow the directions on this thread:
http://forum.xda-developers.com/showthread.php?t=1248644
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Since everyones thanks button must be broke thanks bork
Sent from my SGH-T999 using xda premium

The method didn't worked for me
Волк said:
Follow the directions on this thread:
http://forum.xda-developers.com/showthread.php?t=1248644
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Hi, but the method mentioned here didn't worked for me, I even tried the .kdz method on windows 7 but the LGB2C tool doesn't install and so I can't actuall kdz my phone, The other program shows that "no device found".
Need assistance, Thanks you

vivekmishra said:
Hi, but the method mentioned here didn't worked for me, I even tried the .kdz method on windows 7 but the LGB2C tool doesn't install and so I can't actuall kdz my phone, The other program shows that "no device found".
Need assistance, Thanks you
Click to expand...
Click to collapse
Its works on XP much better so if you can get to an XP computer try from there....I've bricked my phone the same way and cwm works every time for me on xp
Sent from my LG-P999 using xda app-developers app