I have Galaxy ace, with Clockworkmod. Also its rooted.
And I have this problem. I wanted to factory reset phone from android (setting-> privacy -> factory reset), and now this is happening.
Phone starts, show screen animation with galaxy and get to the part where samsung is glowing, and after minute it goes again to animation and again samsung glowing.
I tried to wipe all from clockwork, tried to restore previous image, tried with odin to put new firmware, and same again.
Also i can enter in download mod and recovery
What should I do?!!!
Restore u r nand backup
Try to put other version of firmware with Odin and WIPE before boot new ROM
Galaxy Ace Problem
Hi guys. I'm new here so don't blame me if i made something wrong with this thread...
I've got Samsung Galaxy Ace and i wanted to flash a ROM in it following the instructions of this video on yyoutube with title HOW TO: Install a custom Android ROM for the first time. ( i can not post URL's yet). So I selected the first selection in ROM manager and then i closed my phone... It opened the new ClockworkMod Recovery mode without entering there... The selections "reboot system now" and "power off" dosent fix the problem as the result is the same... Now i can not enter my phone... What can I do??? Please HELP
post in galaxy ace thread..u will get immediate and accurate answers
Related
Hi,
I've recently flashed ClockWorkMod Recovery using Odin to my Samsung Galaxy mini S5570 device,
the opertion was succesfull (Odin said PASS), but now when I try to boot into Recovery (pressing Middle button and power button) the device just get stuck in the Samsung screen (the first screen you see when you regulary power on your device).
Will be glad for some help!
*Any Ideas how to fix this problem? or why does it occur?
1) Will HardReset/FactoryReset the phone will uninstall ClockWorkMod Recovery?
2) Do I need to ROOT my device prior to the flashing of ClockWorkMod Recovery with ODIN?
3) Can I remove/uninstall the ClockWorkMod Recovery?
Thanks advanced for your help!
Same issue
Hello,
I've got exactly the same issue and do not find any answer
Thank you for your help!
Etienne
Same here..
Same problem here, It just shows the samsung logo and that's all, I can't finish installing firmware
Stuck with first screen
I am also stuck with the opening screen. Prior being bricked the phone went through the washing machine. Board was cleaned. It still has carrier SIM lock on it. I am digging the forum for imput, but no luck so far.
With USB clable plugged in it shows only a small phone and computer icon with yellow triangle+exclamation mark on the dotted line between them. Cannot load the hard reset menu. The Download menu with big triangle comes up, that showed at least the display is working.
Odin 4.38 was able to flash the Clockworkmod, but no Gingerbread or some other update. The time runs happily but MIBIB will not load, and i must turn everything off.
I have the same issue. Wondering if there is a fix for this. Can boot into download mode but not Clockworkmod Recovery. Stuck at Samsung screen.
Okay well I found a fix!
I was trying to update CWM Recovery via Odin when I still had Froyo installed on the device. Classic rookie error. You need gingerbread to use the latest CWM. All I had to do was install an official samsung gingerbread ROM via Odin and then I was able to re-install CWM sucessfully. Now running CM9 on my Galaxy Mini and everything is great, very snappy (few bugs though)
Hello guys, my apology if I open this thread somewhere. I just couldn't find a perfect thread to post about these issues. My International Version Samsung Galaxy S3 won't boot up after I root it with ODIN. The rooting was fine as I was able to download some apps in google play for root users. Eventually, I restarted my phone & there you go! It didn't boot up, all I see was a samsung logo & then my phone dead again. I got into recovery mode(home + power + ctrl up), i tried 'wipe data/reset factory" but still to no avail after I reboot my device, it will take me to the start up set-up of samsung (just like when you unbox your phone, the set up message shown when you 1st turn on your phone) but I stucked on the language, after I select language, my phone hangs & dead again. I can get into download mode too (home+power+cntrl dwn) but it will just stuck me to "downloading... do not turn off target'. Can somebody help me with this? I read about flashing & stuff but I just dunno how to do it though I tried but using SGS3 toolkit but again I am stuch at waiting for debugging... ANy help is appreciated.. Thanks
Hello. Im new in this forum. I have problem with my galaxy i9003. The phone work fine before i change the custom rom. Before install jellybean rom i make backup, after backup i install jellybean. Resatrt the phone and jellybean load 10-15 min. May be this version is bad. I restore with CWM, but phone not work. After start phone freeze on welcome menu "Samsung Galaxy S GT-I9003". I turn of and hold vol up +home+start but CWM not load. Again and again not load. Please tell me how to solve this problem. Regards
It seems you need to get back to Gingerbread KPE.
Do a flash from the start including PIT file .
This guide explains how to do it .
http://forum.xda-developers.com/showthread.php?t=1133787
Do exactly as its mentioned there .
Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE?
Please help, sorry my English...
Duarte T.
http://www.hard-reset.org/factory-d...t-i8260-gt-i8262-dual-with-safety-hard-reset/
Hello friends,
I had flashed my galaxy s2 gt i9100 to custom cm11 rom
it was working fine and I then used factory reset and lost root access..
I wanted root so followed the standard procedure of installing cwm recovery using jeebo kernel..
but after installing it, the device started again and the boot up screen came and then went blank and nothing happened..
again when I start it the usual screen with yellow triangle comes and again shuts down directly..
pls help
thanks in advance
You fixed it after all idiot. At least u learned many things on the way.
Just restore your nandroid or reflash the CM zip