Hello. Im new in this forum. I have problem with my galaxy i9003. The phone work fine before i change the custom rom. Before install jellybean rom i make backup, after backup i install jellybean. Resatrt the phone and jellybean load 10-15 min. May be this version is bad. I restore with CWM, but phone not work. After start phone freeze on welcome menu "Samsung Galaxy S GT-I9003". I turn of and hold vol up +home+start but CWM not load. Again and again not load. Please tell me how to solve this problem. Regards
It seems you need to get back to Gingerbread KPE.
Do a flash from the start including PIT file .
This guide explains how to do it .
http://forum.xda-developers.com/showthread.php?t=1133787
Do exactly as its mentioned there .
Related
I have Galaxy ace, with Clockworkmod. Also its rooted.
And I have this problem. I wanted to factory reset phone from android (setting-> privacy -> factory reset), and now this is happening.
Phone starts, show screen animation with galaxy and get to the part where samsung is glowing, and after minute it goes again to animation and again samsung glowing.
I tried to wipe all from clockwork, tried to restore previous image, tried with odin to put new firmware, and same again.
Also i can enter in download mod and recovery
What should I do?!!!
Restore u r nand backup
Try to put other version of firmware with Odin and WIPE before boot new ROM
Galaxy Ace Problem
Hi guys. I'm new here so don't blame me if i made something wrong with this thread...
I've got Samsung Galaxy Ace and i wanted to flash a ROM in it following the instructions of this video on yyoutube with title HOW TO: Install a custom Android ROM for the first time. ( i can not post URL's yet). So I selected the first selection in ROM manager and then i closed my phone... It opened the new ClockworkMod Recovery mode without entering there... The selections "reboot system now" and "power off" dosent fix the problem as the result is the same... Now i can not enter my phone... What can I do??? Please HELP
post in galaxy ace thread..u will get immediate and accurate answers
I am noob to ROMS . First time flashed CM9 using ROM manager and selected backup data. after Installing Rom phone restarted and stuck on screen displaying "INSERT COIN" and options are given like
PHONE
GAMING
BROWSING
PRODUCTIVITY
ANYTHING.
Arrow is stuck on ANYTHING. and Volume buttons and hard reboot isn't working. I pulled battery off and restarted it but still stuck on same screen. Tried it many times. Any help would be appreciated .
which CM9 ROM did you flash? Can you provide a link? Usually I prefer to use CWM Recovery to flash ROMs.
Thank you for reply!!
I solved the problem, I was using wrong cm9 zip.. restored the backup and flashed the correct one. Now It's All good now, enjoy galaxyS3 addon. But it's full of bugs right now I must say. Hoping for a quick update.
same problem
hi im having the same problem which is got stuck on "insert coin!" screen..running CWM v5.0..htc evo 3d..im trying to install jelly bean ROM from here http://forum.xda-developers.com/showthread.php?t=1764323
i had tried to factory reset by holding volume down and power button..but after i select factory reset and "backup and restore" it got stuck..and if i pushh power button it goes back to previous menu..
please anyone help me..i don't know what to do right now..
Hi guys,I am new to this forum and I guess to android as well.Really need your help. I decided to flash CM 9 and everything went smoothly.But after a few hours I discovered that it is not for me.So I decided to back to the stock rom Gingerbread 2.3.3 which I had previously.So I thought that using Odin will do the trick.I have the original rom in my computer.For reference when I connected the phone I only clicked on PDA to select the rom, but after the upgrade finished nothing happened.I had to disconnect the phone to reboot it.And after that the phone tries to boot but nothing happens.It only goes to the Rogers logo and then restarts itself over and over again.What am I doing wrong or not doing at all.It would be very helpful of you to help me go back to Gingerbread again.Can you please provide me with details how to do that.Should I download more stuff like boot loader or anything or just use a different software.
Moved to General Q&A.
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre
Hi XDA members, I came here because I'm tired and I cant'd do anything more, I need help
Ok so first I had a Samsung Galaxy Core Duos GTI8262, original, no modified, android 4.1.2, everything all right.
Then I starded to try to install a costum ROM with 4.4. I rooted it, and then I found a CMW Recovery and I had installed it via Odin307, but it didn't work because it was not compatible with my phone, it was crashing all the time and the phone used to make noises, like an engine working or something, and then it shuts down. Then after much search I found here in XDA a costum Recovery Based in CMW for my phone, "CMW based Recovery v6.0.4.7".
I installed it via Odin307 under the previous CMW that dint work properly, and finally everething went all right, I installed a ROM with KitCat, then another with Lillicop, etc... then I wanted to try Cynogen, it was in my model devolopment and I installed it, bigger mistake, it didn't recognize SIM card such as Wifi, Bluethoth, etc... no conections. I get tired because with all my Download mode started to get stuck, so, I could not install another ROM, so, angry, I went to based CMW Recovery and I formatted EVERYTHING, until get to the point where there wasn't ANY file in SDCARD0, I tried to make factory Reset, didn't work, so I turn the phone On and the logo "Galaxy Core Duos GTI8262" stays there forever... the phone doesn't start.
THEEN... i downloaded the stock ROM here in XDA to my model (I'm Portuguese (Portugal)), and tried to install it via Odin207. I was waiting that the Download Mode got stucked again but I tried it in the same way, because I didn't knew what to do more. BUT, instead of get stuck, the Download Mode only stays for aprox. 5 seconds, then the phone shuts down... SO > nothing in SDCARD0 (and the CWM Based doesn't have the option to install anything in extSDCard I dont know why...) and Download Mode crashes... without pay nothing, WHAT CAN I DO PEOPLE?
Please help, sorry my English...
Duarte T.
http://www.hard-reset.org/factory-d...t-i8260-gt-i8262-dual-with-safety-hard-reset/