Database Info

Please HELP, defy DEAD, nothing works :(

I broke my phone.
I had a Spanish 2.1 defy rooted, and I wanted 2.2 so I installed System recovery and downloaded the UK Blur froyo rom. I installed and everything in the process went well, but I ended up stuck in the Motorola logo. What can I do or flash to the phone? please help me.
I knew stuff about android with my XT720 and Milestone but this phone is really different.
Update: I can't use any firmware either! When I try to flash it says ''failed, unable to charge ini files'' but this was happening even before I restored a backup
Please help me!

if you flashed a 2.2 ROM via RSD Lite, you cant get back to 2.1
go into the RecoveryMode volumedown+power and do a fullwipe (data+cache).
Restart. if that didn't work, than flash another 2.2 ROM with RSD Lite, which must be no older than that one, which you flashed first.
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )

Dodge93 said:
if no, than you'll get back to 2.1, when you go into the bootloader-mode with volumeup+power and flash via RSD Lite a 2.1 ROM ( http://forum.xda-developers.com/showthread.php?t=966537 )
Click to expand...
Click to collapse
I'll try. but everytime I press start on rsd lite it says ''fail''

mtvdeo said:
I'll try. but everytime I press start on rsd lite it says ''fail''
Click to expand...
Click to collapse
I tried but nothing:
''Failed flashing process. Unable to retrive initialization values from INI file (0x729)...Phone connected''
what can I do!??
I tried with this:
JRDNEM_U3_2.59.0_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANOPTUS_P025_A022_M002_HWp3_Service1FF
please, what can i do?

try renaming the file to make it shorter

Peglezn said:
try renaming the file to make it shorter
Click to expand...
Click to collapse
what would that change?

it didn't still the same
so this is the end for my defy?

I'm desperate, please help me
Rsd Lite will give me that error with every firmware I try.
Recovery mode turns on but what can I do?

Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?

edition- said:
Which version of RSDLite are you using? Did you tried to download the sbf again?
Did you flashed 2.2 directly or that "downgradable" stuff?
Click to expand...
Click to collapse
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.

mtvdeo said:
I did not flash anything. Even before when the phone was working, RSD gave me that error. I got rsd 4.6.
I restored the UK Blur froyo backup with the Recovery menu, and I had made a backup of my 2.1, but I can't access to it. Just to the standard recovery mode.
Click to expand...
Click to collapse
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine

do u have the defy drivers installed?

zencoran said:
do u have the defy drivers installed?
Click to expand...
Click to collapse
The problem is that he was using RSDLite version 4.6, he needs to use 4.9 to work.

edition- said:
Ok then, it is easy now to do it, you need to get a 2.1 SBF, then use THIS version of RSDLite
Flash, and reboot, if you stuck in bootloop just wipe and then you will be fine
Click to expand...
Click to collapse
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)

mtvdeo said:
I downloaded it and installed that, but instead of shwoing 4.9, it says 4.3 and does not recognize any phone (defy, rokr e8)
Click to expand...
Click to collapse
Uninstall all versions of RSDLite that you have, this is 4.9, i'm using it.
Then reinstall again, make sure you have the latest drivers : http://developer.motorola.com/docstools/USB_Drivers/Handset_USB_Driver/?pubid=987654

It's working now, but something wird happened. instead of opening flash image, it just started saying ''flashing phone''.
I guess it's just a mistake.

question, after this 2.1 I flashed and if it works, can I flsh a 2.2 firmware?
which one (with blur)?
thanks again.

update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/

mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
That one doesn't have BLUR as you can see in the name, and i think there are problems flashing directly after 2.21, many people had to go thru 2.51, did you wiped after flash?

mtvdeo said:
update:
I flashed this froyo:
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN
it works ok, but 3G and wifi don't work :/
Click to expand...
Click to collapse
Didn't noticed you were from Uruguay, since that is a EU ROM you will have to flash one of this fixes : http://forum.xda-developers.com/showthread.php?t=944258
The "Argentina" one should be fine.

stuck at Fastboot ! SOS !!!

Hi eveyone,
I'm a little bit lost with my phone...
My xt925 was in :
Branding: Orange France Version: 9.8.0Q-97-XT925_VQU-19 Android Version: 4.1.1
and because I want to use 4G I want to flash with:
Branding: Retail France/Retail Central Europe Version: 9.8.2Q-8-XT925_VQU-22 Android Version: 4.1.2
So I used RSD lite to flash to 4.1.2 but RSD lite was stuck in step 15/22 flash boot "boot_signed" (without the "var ligne")
By surfing the internet I though that maybe I should unlock the bootloader.
So I did it with th motorola web tool and now it's unlocked but RSD lite still stuck in step 15/22 flash boot "boot_signed"
I've tried also to flash from the sd card in recovery mode but: installation aborted ...
I also tried with RazrHD-Toolkit-5.0 and DroidHD Utility Lite but it always come back to fastboot:
AP Fastboot Flash Mode (S)
10,9B(*) (sha-5b608bc, 2012-12-20 23:52:32)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code: 3
Battery OK
Transfert Mode:
USB Connected
Fastboot Reason: Sticky bit factory_fastboot
usb connected
Please help me to thefinish the work ...... I beg you !!! :crying:

foxtom said:
Hi eveyone,
I'm a little bit lost with my phone...
My xt925 was in :
Branding: Orange France Version: 9.8.0Q-97-XT925_VQU-19 Android Version: 4.1.1
and because I want to use 4G I want to flash with:
Branding: Retail France/Retail Central Europe Version: 9.8.2Q-8-XT925_VQU-22 Android Version: 4.1.2
So I used RSD lite to flash to 4.1.2 but RSD lite was stuck in step 15/22 flash boot "boot_signed" (without the "var ligne")
By surfing the internet I though that maybe I should unlock the bootloader.
So I did it with th motorola web tool and now it's unlocked but RSD lite still stuck in step 15/22 flash boot "boot_signed"
I've tried also to flash from the sd card in recovery mode but: installation aborted ...
I also tried with RazrHD-Toolkit-5.0 and DroidHD Utility Lite but it always come back to fastboot:
AP Fastboot Flash Mode (S)
10,9B(*) (sha-5b608bc, 2012-12-20 23:52:32)
eMMC Info: Size 16GB
Device is UNLOCKED, Status Code: 3
Battery OK
Transfert Mode:
USB Connected
Fastboot Reason: Sticky bit factory_fastboot
usb connected
Please help me to thefinish the work ...... I beg you !!! :crying:
Click to expand...
Click to collapse
I think you are fine, just need to clear the bit. I think flash almost any thing from fastboot like bootlogo or recovery.

aviwdoowks said:
I think you are fine, just need to clear the bit. I think flash almost any thing from fastboot like bootlogo or recovery.
Click to expand...
Click to collapse
thanks for your help but it's not very clear for me (ok I'm busted I'm a newbie in android flash lol), what should I do ? Could you detail a little more ? thanks :fingers-crossed:

when trying to flash in recovery (apply update from sd card) with rom france retail 4.1.2 (renamed en update.zip) I have these messages:
-- Install /sdcard ...
finding update package...
Opening update package...
Verifying update package...
Insatllation aborted.
any idea ? thanks ..

foxtom said:
when trying to flash in recovery (apply update from sd card) with rom france retail 4.1.2 (renamed en update.zip) I have these messages:
-- Install /sdcard ...
finding update package...
Opening update package...
Verifying update package...
Insatllation aborted.
any idea ? thanks ..
Click to expand...
Click to collapse
Use stock recovery & hide root. Play has voodoo.

aviwdoowks said:
Use stock recovery & hide root. Play has voodoo.
Click to expand...
Click to collapse
how can I do that ? I'm a newbie in android flash ... sorry ...

foxtom said:
how can I do that ? I'm a newbie in android flash ... sorry ...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
See recovery goodies
All msm8960 stock recovery is same,
925 is 8960 too.
Flash it from your twrp or cwmr.
Reboot recovery
 @the dead robot press the vol keys for 2- 3 sec to get passed him.
Voodoo is a app easy....

aviwdoowks said:
http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3
See recovery goodies
All msm8960 stock recovery is same,
925 is 8960 too.
Flash it from your twrp or cwmr.
Reboot recovery
@the dead robot press the vol keys for 2- 3 sec to get passed him.
Voodoo is a app easy....
Click to expand...
Click to collapse
I'm sorry (scared to brick my xt952...) but in recovery goodies I downloaded "xt907-stock.recovery.zip"
is it the right file you want me to DL ?
I don't understand your "msm8960" ...

foxtom said:
I'm sorry (scared to brick my xt952...) but in recovery goodies I downloaded "xt907-stock.recovery.zip"
is it the right file you want me to DL ?
I don't understand your "msm8960" ...
Click to expand...
Click to collapse
I would. Easy.
Cautious:
You want to dl the 925 fxz/xml & move the recovery.img to sd card & let "Recovery tools" app from play do it.
I use any atrix hd, xt925, xt926 & photon Q cwmr & stock (not twrp) recovery on my xt907 all the time.
The stock files are identical.

aviwdoowks said:
I would. Easy.
Cautious:
You want to dl the 925 fxz/xml & move the recovery.img to sd card & let "Recovery tools" app from play do it.
I use any atrix hd, xt925 or xt926 recovery on my xt907 all the time.
The stock files are identical.
Click to expand...
Click to collapse
ok so where do I get the 925 fxz/xml ? and further more how do i run "recovery tools" app whereas my phone doesn't boot to android ????
idem for voodoo app !
I'm sorry but I really don't understand what you want me to do ... :crying:

foxtom said:
ok so where do I get the 925 fxz/xml ? and further more how do i run "recovery tools" app whereas my phone doesn't boot to android ????
idem for voodoo app !
I'm sorry but I really don't understand what you want me to do ... :crying:
Click to expand...
Click to collapse
Did you say what recovery & exact version?
You are on right now. Where did you get it?

aviwdoowks said:
Did you say what recovery & exact version?
You are on right now. Where did you get it?
Click to expand...
Click to collapse
no I didn't say what recovery & exact version.
you are on right know --> what does it mean ???
Where did you get it? --> what are talking about ???

foxtom said:
no I didn't say what recovery & exact version.
you are on right know --> what does it mean ???
Where did you get it? --> what are talking about ???
Click to expand...
Click to collapse
You said the ota failed right?
So I assumed you on custom recovery.
Am I right?
I need much more info from you as we go along! Ok?

aviwdoowks said:
You said the ota failed right?
So I assumed you on custom recovery.
Am I right?
I need much more info from you as we go along! Ok?
Click to expand...
Click to collapse
not OTA but flash to stock 4.1.2 (was on stock 4.1.1)
alright what infos do you need ?

foxtom said:
when trying to flash in recovery (apply update from sd card) with rom france retail 4.1.2 (renamed en update.zip) I have these messages:
-- Install /sdcard ...
finding update package...
Opening update package...
Verifying update package...
Insatllation aborted.
any idea ? thanks ..
Click to expand...
Click to collapse
Here is where I let you down.
That item you renamed was it the ...carrier blah blah.xml.zip?
If so that zip needs to be extracted to its own folder. Then run the latest drivers from the moto site. Next install rsd. Run rsd & select the .xml file by using the ... button in rsd.

aviwdoowks said:
Here is where I let you down.
That item you renamed was it the ...carrier blah blah.xml.zip?
If so that zip needs to be extracted to its own folder. Then run the latest drivers from the moto site. Next install rsd. Run rsd & select the .xml file by using the ... button in rsd.
Click to expand...
Click to collapse
That item you renamed was it the ...carrier blah blah.xml.zip? yep that a was i try cause flashing with rsd lite wasn't working
If so that zip needs to be extracted to its own folder. Then run the latest drivers from the moto site. Next install rsd. Run rsd & select the .xml file by using the ... button in rsd --> did this many times ...

Ok
You never say what version of rsd.
Need 6.1.5.
Also take out any whole lines with getvar in them, from the xml
---------- Post added at 01:28 PM ---------- Previous post was at 01:25 PM ----------
If that is not it then I am stumped & someone else can step in.
Or go to the House of Moto. I have a link in the general section.

aviwdoowks said:
Ok
You never say what version of rsd.
Need 6.1.5.
Also take out any whole lines with getvar in them, from the xml
---------- Post added at 01:28 PM ---------- Previous post was at 01:25 PM ----------
If that is not it then I am stumped & someone else can step in.
Or go to the House of Moto. I have a link in the general section.
Click to expand...
Click to collapse
i've tried rsd 6.1.4 and 6.1.5
no blank lines left in the xml
ok house of moto, in xda forums?

foxtom said:
i've tried rsd 6.1.4 and 6.1.5
no blank lines left in the xml
ok house of moto, in xda forums?
Click to expand...
Click to collapse
My do not click has a link or our gen forum

aviwdoowks said:
My do not click has a link or our gen forum
Click to expand...
Click to collapse
ok found it, gonna read this
thanks for your help !

Need a little suggestion guys

Guys i m from india using atrix 2.
was trying to flash liquid kitkat rom using cwm.
it was succesfull..i rebooted and all i get is error msg
fast boot ( boot faliure)
its getting detected using rsd lite but i dnt know the exact sw version of phone for stock rom..
can u guys please suggest me what should i do
thanks

Alteredge said:
Guys i m from india using atrix 2.
was trying to flash liquid kitkat rom using cwm.
it was succesfull..i rebooted and all i get is error msg
fast boot ( boot faliure)
its getting detected using rsd lite but i dnt know the exact sw version of phone for stock rom..
can u guys please suggest me what should i do
thanks
Click to expand...
Click to collapse
Fall of Enosis said:
This happens because the flashing failed when you tried to flash the wrong firmware. When the phone boots, it runs certain system checks, and if it fails those checks, as a safe mode, it throws itself into Fastboot. It will do this because it is unsure if the phone is safe to boot.
You can boot it normally from fastboot by hitting power, (screen shuts off) hold down both volume rockers, and hit the power button. Then select boot normally.
Click to expand...
Click to collapse
If you want to get back to stock, FXZ back to one of the stock AsianRetail firmware which can be found here.
If you don't know what FXZ is, read here.
Root from here.
If for some one reason this firmware does not work for you (it didn't for me, it got stuck at lockscreen everytime the phone booted and I couldn't unlock the phone) you could use this firmware.
Root from here.
Hope it helps!
Cheers.

Thank you so much buddy
it worked!!!!
Flashed with stock rom and its working fine now
thanks so muchh!!!

[REF] GALAXY NOTE 3 (SM-N9005) GSM MODEM'S Collection (Odin)

[highlight]ALL MODEMS HERE ARE OFFICIAL by SAMSUNG and for the SM-N9005​[/highlight]
To decode what the letters/numbers of the modems mean, click here:
http://forum.xda-developers.com/showthread.php?t=1356325
FLASH GUIDE:
Switch off your device completely.
Connect to PC and Power on your phone in Download Mode (Vol Down+Home+Power)
Start Odin v3.09 (be sure it recognised your phone and show ID:COM port number)
Untick Autoreboot
Flash MODEM.BIN (CP slot - unzip it first)
Reboot once again into Download Mode using Vol Down+Home+Power
Tick Autoreboot and flash NON-HLOS.BIN
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off
DOWNLOAD MODEM+NON-HLOS N9005:
N9005XXUGBPB2 :good:New! as of 3/3/2016 Latest [Lollipop]!
Others
N9005XXUGPOK2
N9005XXUGBNL8
N9005DXUGNK1
N9005ZHUENJ1
N9005XXUGNI3
N9005DXUGNH1
N9005XXUGNG1
N9005XXUFNG2
N9005XXUENE3
...uploading previous modems
For bootloaders, older modems and stock ROM's, try here:
https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/

reserved

reserved last

help me
i follow all the step.... but still cannot success

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
odin shows "PASS" message? what error do you see?

Jojobizarre001 said:
i follow all the step.... but still cannot success
Click to expand...
Click to collapse
Try taking out and put back your battery before flashing.

Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2

MuhammadZeeshan7 said:
Can I flash 4.3 modem on 4.4.2 ?
I have n9005 on 4.4 at the moment, getting unknown baseband and imei. Problem started after flashing 4.4.2
Click to expand...
Click to collapse
no you can't... try re-flashing a new one

I have downloaded both g2 and g1 but got md5 error on each.

Questions
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?

Camela said:
Is there any risk that any personal data (photos,apps..and so on) will be lost when flashing modem?
and will this modem work on my note 3? im in sweden
can I take an backup of my old modem?
Click to expand...
Click to collapse
1- No
2- Yes
3- Not needed, i will soon upload other modems too. Anyway you can't go back from a newer version (i never needed to test it but people said it's almost impossible to do)

encho said:
I have downloaded both g2 and g1 but got md5 error on each.
Click to expand...
Click to collapse
Remove MD5 extension and unzip the tar file using winrar and then you will find two files, flash modem.bin.
---------- Post added at 07:11 PM ---------- Previous post was at 06:52 PM ----------
Tried lots of time, nothing worked out for me, still having MJ7 the old version..... Can anyone help???

Failed
finally i got whole flash process to work, but its still the same baseband version

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
sometimes baseband doesn't flash correctly, try again :fingers-crossed:

Camela said:
finally i got whole flash process to work, but its still the same baseband version
Click to expand...
Click to collapse
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over

KaszasM said:
You need to flash it twice untick autorestart flash ,dont disconnect usb -2.!!power off with button going to reboot auto-hold volume down go in download ,now tick autorestart flash again and you got new baseband. Flashing only once never worked for me
But it should be enough to HOLD POWER OFF UNTIL BLACKSCREEN download mode and flash... So basilcy the the second part of the description over
Click to expand...
Click to collapse
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
not at all, I usually flash once and it's ok. Sometimes you need to flash twice or even more.

zhoowa said:
Is this 2time flash a must? I flashed it once it says correct description of modem. Does this mean it can misfunction if i flashed only once?
Ty
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
the diffrence is in the powr off way !! if you turn your device out usually way ,you flash you dont see the new baseband version in the rom , before flash you need to FORCE POWER OFF - HOLD POWER OFF button until BLACK SCREEN ,than right into download mode and flash ,and you get/see new baseband in rom too, if you dont do it like that then the baseband in rom gonna stay the same/old

worked...
Repeated the procedure twice ( 4 flashes ) and then it worked...

Lord Eko said:
no you can't... try re-flashing a new one
Click to expand...
Click to collapse
You were wrong actually. I was having Unknown baseband and flashing any KK modem didn't help.
Now i'm on KK and using JB modem.

my device is not booting help me please !

hello xda
iam noob at odin yesterday i tried to flash a rom with odin but when the flashing process finished successfully the device didnt boot stuck at samsung Logo then i flash another rom this time the device didnt boot i cant do anything with the device just entering odin mode please help me
My device is samsung tab 7.0 plus GT-P6200
and i use Odin 3.11 v
sorry for bad english BTW

zaid anmar said:
hello xda
iam noob at odin yesterday i tried to flash a rom with odin but when the flashing process finished successfully the device didnt boot stuck at samsung Logo then i flash another rom this time the device didnt boot i cant do anything with the device just entering odin mode please help me
My device is samsung tab 7.0 plus GT-P6200
and i use Odin 3.11 v
sorry for bad english BTW
Click to expand...
Click to collapse
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
ah i forget to say that i dont have recovery becuse i was downloading a stock rom so idont have one
Click to expand...
Click to collapse

zaid anmar said:
fast69mopar said:
Are you able to boot into recovery using the correct button sequence? Use this button combination:
Press and hold - POWER + VOLUME UP
If the recovery menu shows up, use the volume up/down button to scroll to Wipe Data/Factory Reset. Let it wipe and then select Reboot System Now and see if your device will boot normally. Good luck and let me know what happens.
ah i forget to say that i dont have recovery becuse i was downloading a stock rom so idont have one
Click to expand...
Click to collapse
Okay. No problem. I've had some issues with Odin 3.11 which you said you used to flash back to stock. I've had the most success with Odin 3.07 and 3.10. I would download Odin 3.07 and use it to flash the stock firmware. Make sure you are flashing the same firmware version that you were using before your problem started. So, if you were using 5.1.1, make sure you flash a stock 5.1.1 firmware.
Also, where are you downloading the stock firmware from? I use www.sammobile.com. It takes forever to download a firmware if you don't have an account but it's legit, stock firmware. Hope this helps. Good luck. Let me know what happens.
Click to expand...
Click to collapse

fast69mopar said:
zaid anmar said:
Okay. No problem. I've had some issues with Odin 3.11 which you said you used to flash back to stock. I've had the most success
hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Click to expand...
Click to collapse
Click to expand...
Click to collapse

hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Was the device running a stock ROM with stock recovery installed or was it running a custom ROM with a custom recovery installed? If it was running a stock ROM with stock recovery I would try and flash the exact same firmware from sammobile.com. I would try and find out exactly which version of Android the device was running if I were you. Let me know. Ill help with what I can.

fast69mopar said:
hello
now what i have to do is to download odin 3.0.7 and download the same rom that i was using before the softbrick but the tap is not mine and i dont know what the rom was maybe 4.1.1 but what happen if i flashed another rom is that wrong or what ?
and the roms i used was from sammobile
Was the device running a stock ROM with stock recovery installed or was it running a custom ROM with a custom recovery installed? If it was running a stock ROM with stock recovery I would try and flash the exact same firmware from would try and find out exactly which version of Android the device was running if I were you. Let me know. Ill help with what I can.
Click to expand...
Click to collapse
i tried to flash a rom with the 3.0.7 Odin but the same thing happened the rom i tried was the same of my tab rom but from another country maybe
my device was running in stock rom and stock recovery

zaid anmar said:
i tried to flash a rom with the 3.0.7 Odin but the same thing happened the rom i tried was the same of my tab rom but from another country maybe
my device was running in stock rom and stock recovery
Click to expand...
Click to collapse
Have you tried to use Samsung Kies or Smart Switch and selecting the Emergency Recovery Mode? That would be my next step if all of my Odin flashes did nothing. Give it a try and let me know what happens. Good luck.

how i select the emergency recovery mode
ah the another problem samsung kies 3 dont read my device