Database Info

[Q]Ending a Probable Soft Brick

I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?

KingMotion said:
I tried flashing CM9.1 using ROM Manager tonight on my GT-P3113 and it's now stuck on a boot loop. The blue Cyanogen creature comes onscreen with a flashing chest and the background has this electronic blue vortex look. I'm unable to do anything and holding the power button only reboots into the loop. Is there a way to fix this?
Click to expand...
Click to collapse
Let me think about this. I don;t think you are bricked.

DigitalMD said:
Well first I must chastize you for not read probably the very first post here that warns peple not to use RomManager with these devices.
Click to expand...
Click to collapse
I accept chastization [?]

KingMotion said:
I accept chastization [?]
Click to expand...
Click to collapse
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?

DigitalMD said:
Best thing to try is returning to stock configuration. Do you know how to use ODIN to flash the stock ROM? is this a US Wifi model ?
Click to expand...
Click to collapse
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.

KingMotion said:
It is a US WiFi model. I used ODIN to flash recovery but if there are instructions on the site, I'd take those as well.
Click to expand...
Click to collapse
If you can still get into CWM, then i would recommend you try flashing this stock ROM which is 4.1.1 JB
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
If you prefer to return to stock ICS 4.0.4 you can download the odin stock firmware here
http://www.hotfile.com/dl/170457040/052efe5/P3113UEBLH2_P3113XARBLH2_XAR.zip.html
CM9 is outdated and no longer being supported.
CM10 based ROM are available on the forum, but be careful and follow instructions in the thread exactly.
It is possible to hard brick this device permanently so be careful.
DO NOT DO A FACTORY RESET OR DATA WIPE FROM STOCK RECOVERY

DigitalMD said:
If you can still get into CWM, then i would recommend you try flashing this stock ROM .
http://forum.xda-developers.com/showthread.php?t=1861370
Which version of CWM recovery are you using? Make sure its 6.0.1.9 or higher.
Click to expand...
Click to collapse
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.

Nvm. I found an Odin download.

KingMotion said:
I can boot into recovery if that's what you mean. I do believe that was the version of CWM that I installed. I'll go into download mode and flash that one. I need a link to Odin though. I have no idea why I deleted it, and the links I followed were no longer valid.
Click to expand...
Click to collapse
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://d-h.st/WuY

DigitalMD said:
for the 4.1.1 JB rom you can use CWM.
For the stock 4.0.4. ISC use ODIN
http://www.mediafire.com/download.php?v7f6vrgruqkwn58
Click to expand...
Click to collapse
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?

KingMotion said:
As you can tell, I'm a bit of a noob. So I need to boot into recovery for the 4.1.1 then? That is, Power + Volume Up?
Click to expand...
Click to collapse
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
If this doesn't fix the boot problem then ODIN flash the stock ICS from the link I provided.use odin 1.8.5
That would remove any corruption caused by the failed CM9 ROM flash, hopefully.

DigitalMD said:
Power + vol up. When you see the samsung logo, release the power but continue to hold vol+up until CWM displays. Make sure you are in CWM, not the stock recovery.
Click to expand...
Click to collapse
I got into CWM and it's v6.0.2.3. Just waiting for the JB ROM to download so I can load it onto my SD card and then flash.

Thanks for all of your help! :good:

KingMotion said:
Thanks for all of your help! :good:
Click to expand...
Click to collapse
That CWM is fine.,
Good luck, Let us know if you have success..... or not.

CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.

KingMotion said:
CWM flash failed. Going to download the Stock ICS and flash using Odin. After I root again, I'll flash that JB Rom anyway.
Click to expand...
Click to collapse
Here's a quick tutorial on flashing odin roms.
ignore the model and rom that doesn't match yours
1. download samsung kies to get the correct driver for gt-p3113
2. download odin3 v.1.85
3. download Stock Firmware
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P3113xxxxxxx.zip until you get file P3113xxxxxxxxxxx1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P3113xxxxxxx.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot

Flashed stock ICS and.....it works!
Thanks a lot man. That's the first and last time I try to flash from RM. Gonna flash that stripped down JB ROM now though.

I now have JB 4.1.1 and am veery happy. You're a lifesaver.

KingMotion said:
I now have JB 4.1.1 and am veery happy. You're a lifesaver.
Click to expand...
Click to collapse
You are very welcome. Happy Holidays.

S6 bricked after root, tried everything

Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9, kies and smart switch (which says my device is not supported)
What can i do now?
Please help me

Speed™ said:
Guys today i tried to root my s6 but it's now bricked.
I tried EVERYTHING: odin 3.10.6, odin 3.9 kies and smart switch (which says my devie is not supported.
What can i do now?
Please help me
Click to expand...
Click to collapse
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?

Faspaiso said:
You haven't tried everything. You have tried everything you know tho. If you had tried everything, there was no point asking.
First, was you on 5.1.1 and did you use CF-Autoroot?
Can you get into download mode and flash stock 5.1.1 from Sammobile?
Click to expand...
Click to collapse
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode

Speed™ said:
Yes i tried everything i know
I was on 5.0.2 and tried cf autoroot
I downloaded 5.1.1 firmware but odin keeps saying FAIL.
I'm now downloading the same stock fw that was pre installed. Can i do something else?
Yes i can get into download mode
Click to expand...
Click to collapse
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.

I will try it. I'm downloading the firmware right now (so slow)
Is there any way to turn off the phone? I hope it won0t suffer burn in effect because of the static image.

Faspaiso said:
Well it's a soft brick then.
If I can't help you, someone else definitely know the answer.
Try follow this. This is a guide to flash a custom rom, but well, you just follow the bootloader and modem part and AFTER that you flash stock 5.1.1.
http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
You can't root on 5.1.1 tho. Not as of yet. Then you need a custom rom. But let's take that after your phone is fixed.
Do exactly as stated in the "guide". Flash modem + bootloader together and AFTERWARDS if it flash succesfully you flash 5.1.1 stock from Sammobile (you can't downgrade so 5.0.2 is not possible to flash anymore. It will fail.)
Just under the guide the bootloader and modem is for the difference models. Make sure to download the right one.
Click to expand...
Click to collapse
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?

Speed™ said:
I did exactly what you said but nothing. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''

afehst said:
you may want to try this flash this file: ''CF-Auto-Root-zeroflte-zerofltedv-smg920i.tar.md5''
Click to expand...
Click to collapse
I don't think i would help because i neither flashed the firmware. Anyway thanks

Speed™ said:
I did exactly what you said but nothing. Odin completes all the processes but at the end says FAIL. I really dunno what to do guys. Is there a possibility to fix this?
Click to expand...
Click to collapse
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?

Faspaiso said:
As long as you can get into download mode, it's just soft bricked. Try different PC's and USB ports. That have helped me more than once when getting stuck on Odin.
But what were you on when you tried to root? 5.0.2 or 5.1.1? Can't see why flashing stock firmware should fail. You sure you do everything right?
Click to expand...
Click to collapse
I was on 5.0.2.
I used odin 3.10.6, clicked on AP, swlected the TAR file then clicked start. Everything goes OK until the end when odin displays FAIL. Really dunno what problem coulb be

Bring your S6 back to Samsung for warranty repair.

What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app

Cyanandroid said:
What recovery u are on?
Can u get to the recovery screen and the odin screen?
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
I can,t access to recovery but can access to odin mode (download mode)

Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Sent from my A0001 using XDA Free mobile app
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
If not then just download the samsung galaxy stock rom zip amd flash it using philz.U can also root ur system using philz recovery as it has an built in rooting option...
Hope it helps
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I can,t access to recovery but can access to odin mode (download mode)
Click to expand...
Click to collapse
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
Cyanandroid said:
Then why u are crying simply flash a philz recovery or twrp recovery and problem will be solved.
Click to expand...
Click to collapse
He is simply asking for help. How should he know?

Faspaiso said:
If you can acces Download, you can access recovery aswell. Hold down home button + volume down + power button until it starts a reboot. Once the screen go black, release all buttons and then fast volume up + homebutton + power button at the same time and there you go, you're in recovery.
The reason you think you can only get into download mode is because the same button combination that gets you into download mode restarts your phone.
So yes, try flash TWRP from Odin.
---------- Post added at 09:06 AM ---------- Previous post was at 09:04 AM ----------
He is simply asking for help. How should he know?
Click to expand...
Click to collapse
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.

Try flashing philz recovery.i actually prefer it.
Sent from my A0001 using XDA Free mobile app

Speed™ said:
I flashed twrp with odin. Process OK but i really can't access recovery. Appears a red text on top left : Recovery is not seandroid enforcing
I think i'm doing something wrong. Or not?
I attached an image of the error.
Click to expand...
Click to collapse
Well if you succesfully flash 5.1.1 your phone works again. No idea what's wrong with your Odin tho. Try delete all the Odin files and download it again (https://www.androidfilehost.com/?fid=95916177934555153).
I THINK you're on 5.1.1 bootloader and modem as I got the same error as you. I flashed 5.1.1 bootloader and modem and could not start phone before 5.1.1 firmware was flashed.
You COULD try follow this again STEP FOR STEP when re-downloaded Odin (and deleted all the old Odin files). http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3 REMEMBER to download the right version for your device. Like if you have SM-G920F it's JUST below the guide, else scroll further. Remember the bootloader and modem should be flashed at the SAME time and is not for the PDA slot. If it succesfully flash them, then try 5.1.1 stock firmware now.
But step for step the guide and be aware of those (DO NOT connect your phone before this step, otherwise it won't work!).
If you don't want to try that all over again (as I THINK you're on 5.1.1 bootloader and modem) you could try download download Odin again (as linked) and try different USB ports + PC's. If you try to flash bootloader + modem again, then try different PC's and USB ports too.

Wait wait guys... I just flashed a newer versione of twrp (
Why the hell i was flashing an older version??? ) and BOOM...it restarted and surprise...5.1.1 upgrade with my data and files (nothing touched and deleted).
I can't figure it out why root on 5.0.2 didn't work...
Finally i got it back working at least.
Thank you guys form you quick support and thank you Faspaiso for the help
Btw, root on 5.1.1 not already available?

Smells like reactivation lock.

Can't enter TWRP on SM-G920F

Hi all,
Pls help me in this case!
I flashed rom stock for S6-920F via ODIN, it worked nomally after restart.
Then I flash TWRP 3.0.0-1 via ODIN too, It passed everything was OK.
But when I start the phone in Recovery mode it just stucks at Recovery is not seandroid enforcing!
:crying:
Pls hepl me with all thankkkk

Hi,
do you have new stock rom DPCA?
For me the same.
Help: Hard Reset by using more than 10 sec. power off and volume down button at the same time.
Then my s6 boots normal.
I guess we need a new version of twrp!?
Greets JG

johngordon said:
Hi,
do you have new stock rom DPCA?
For me the same.
Help: Hard Reset by using more than 10 sec. power off and volume down button at the same time.
Then my s6 boots normal.
I guess we need a new version of twrp!?
Greets JG
Click to expand...
Click to collapse
hi,
My s6 with newest stock rom worked nomally, but I want flash rom XtreStoLite 3.0 via TWRP 3.0.0.0
First I flash rom Stock via Odin, done and my s6 reboot
Then I flash REC TWRP via odin too, it ok but I cant load TWRP when press when press vol+ , home , pow

Hi,
meanwhile I read the thread about twrp 3.0.0.0 ...
It seems that original 3.0.0.1 doesn't work with 6.0.1
There is a reference on page 120 to arters97 compiled twrp version.
Its a possibility, I didnt try it.
Greetz JG

johngordon said:
Hi,
meanwhile I read the thread about twrp 3.0.0.0 ...
It seems that original 3.0.0.1 doesn't work with 6.0.1
There is a reference on page 120 to arters97 compiled twrp version.
Its a possibility, I didnt try it.
Greetz JG
Click to expand...
Click to collapse
haha, tks Bro very much
After flash arter97-recovery-g920fi-13.0-twrp_3.0.0-0 via Odin i can enter REC TWRP, now i can intall rom Xtre 3.0
One mor time, tks

My galaxy s6 is stuck on bootloop nothing works please help.

Hello I am so new to this things, my S6 got stuck on installing system update. I downloaded official firmware and tried installing it with odin, it passed but then again got stuck installing system update. Can someone please help me, I am from El Salvador and I saved so much to buy this phone. When I go into recovery mode I get TWRP but i dont know what to do.

try downloadmode and install rom again wirh odin??

lambik333 said:
try downloadmode and install rom again wirh odin??
Click to expand...
Click to collapse
I did, same thing it gets stuck on installing system update screen

dbuyck1 said:
I did, same thing it gets stuck on installing system update screen
Click to expand...
Click to collapse
sometimes you have to wait for 10 mins......same as custom rom..

lambik333 said:
sometimes you have to wait for 10 mins......same as custom rom..
Click to expand...
Click to collapse
I waited for almost 5 hours nothing happened

dbuyck1 said:
I waited for almost 5 hours nothing happened
Click to expand...
Click to collapse
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?

sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse

Download Samsung SmartSwitch and from the upper menu select Emergency Recovery Mode, put your phone in Download Mode and connect it to your computer, enter your model number and S/N when asked, and it will download and install latest firmware for your model.
Sorry, i haven't seen that you already tried that.

dbuyck1 said:
sofir786 said:
If you flashed a stock firmware successfully it will not boot into twrp, flashing a stock firmware will install stock recovery, which means the stock firmware did not flash properly. Have you tried smart switch at all? Are you sure you have the correct firmware to flash through odin?[/QUOTE
Yes I am sorry I didn't explained that. Atfer I tried to install stock ROM it got stuck, then smart switch didn't recognize the device but I manage to do the emergency recovery thing with model number and s/n but same thing it got stuck on the same installing system update screen. After that I installed TWRP via Odin to try to push a custom ROM zip, I did that but when I tried to install it failed.
Click to expand...
Click to collapse
That means TWRP works and Fastboot/Download works. What is the actual Galaxy S6 model? Mine is G920F.
What custom ROM did you try?
What version of TWRP are you using? The wrong one can create issues.
Did you wipe the phone trough TWRP first? Twice? Including internal memory?
Sent from my SM-G920F using XDA Labs
Click to expand...
Click to collapse

Galaxy S6 probably softbricked? Ran out of things to try,

I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.

M3gNa said:
I've tried everything that i could find using google. Nothing has worked so far.
My friend has a S6 that was on 5.1.1 with root. It didnt received OTA updates so he tried to flash the new Nougat rom using ODIN. Alas the phone softbricked.
I can access download mode, but doesn't matter what firmware i try ODIN always end up failing. It's either sboot.bin, cm.bin so i think it has something to do with the bootloader? I'm not sure.
Tried to use SmartSwitch too but after it downloads the firmware it gives me an error and says to enter safe mode (????) so that's not working either.
Has anyone have an ideia of what to try next?
Thanks in advance.
Click to expand...
Click to collapse
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way

hairyfred said:
Hold down all the buttens on the phone , it should eventually get to download mode , then flash twrp and then flash a rom and see if it boots that way
Click to expand...
Click to collapse
Already tried. Touchscreen on TWRP is not responsive.

Do you using latest Odin 3.12.7 and newest Samsung USB Drivers and latest right firmware for your model (the best way to get it is SamFirm)?

Softbricked S6, Only Download mode
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM

tarun1188 said:
Hi,
I'm facing the same issue. Tried multiple firmware from sammobile using latest version of odin. I can access only download mode and when not in download it boots till the samsung logo and goes into bootloop. https://imgur.com/a/9bJnM
Click to expand...
Click to collapse
Flash twrp, flash a rom , should let it boot

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
Touchscreen is not working on TWRP. I'm downloading a Custom ROM and will try to install it trough ADB using TWRP commands. Shot in the dark.

Ended up not working.
Tried PhilZ recovery and I got to flash Global Elite rom but it doesn't boot. Is PhilZ compatible with Nougat roms? What else can I try with this recovery.

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.

tarun1188 said:
I flashed TWRP using odin and got "pass" message. But i cannot access recovering mode. I can access only recovery mode and after flashing with stock rom i get the message as "pass" in odin as always but same bootloop.
Click to expand...
Click to collapse
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.

rifek4 said:
Download right newest firmware for your model, use SamFirm to get it. Then use Odin 3.12.7 with newest Samsung USB Drivers to full-flash stock ROM. Set also "Factory Reset" in Odin then START. If Odin shows you 'pass' then everything comes good.
Click to expand...
Click to collapse
Done that, No change. What else can i try to make this work ?

tarun1188 said:
Done that, No change. What else can i try to make this work ?
Click to expand...
Click to collapse
Did you for sure used right firmware correctly for your model etc? Look HERE, try like that.

How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk

gmajnkek said:
How is/was your reactivation lock? On or off. I had problems with odin when it was ON.
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc

tarun1188 said:
It is OFF. See here => https://imgur.com/a/9bJnM I downloaded the right firmware for model. I'm sure of it now. Used samsung smartswitch to know my csc code using serial number. Still i'm facing the same issue. I'll try flashing it on another pc later today. Also, Should i change any odin setting while flashing ?? Like NAND erase or bootloader update etc
Click to expand...
Click to collapse
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.

rifek4 said:
Not necessary, just "Factory Reset" and that's it. I don't know why Odin shows you "pass
" and your phone still shows "system status: custom". Looks like Odin didn't flashing correctly.
Click to expand...
Click to collapse
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.

tarun1188 said:
This was before i flashed using Odin. I tried flashing twrp first and then stock rom. Does this make any difference ?
P.S: I'm not able to access recovery mode, only ODIN is possible.
Click to expand...
Click to collapse
Make photo of bootloader after flashed stock via Odin.
BTW
First TWRP then stock? Why? xD

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
This.

tarun1188 said:
This.
Click to expand...
Click to collapse
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...

hairyfred said:
Flash twrp, flash a rom , should let it boot
Click to expand...
Click to collapse
rifek4 said:
Ok, but why stock? If you flashed TWRP then full-wipe and clean install for example Noble ROM. Try like that...
Click to expand...
Click to collapse
After i flash TWRP, Odin show 'pass' but i'm not able to access recovery mode. vol up + home + power button.