Can anyone who has the official Samsung mount tell me if it has a 30 pin connector AND a 3.5 out or just the 30 pin? I have searched high and low and can't seem to find the answer to this. Thanks!
I have the official Samsung mount with the windshield suction thing. Is that the one you mean? If so, min just has a 30 pin plug for the tablet and then a little 1/8" style power adapter out the back side with a cord that goes to the cigarette lighter.
Thanks for the info. I was hoping to use this for power and audio out but that doesn't look like it will work.
Related
Hi there,
I've had a few phones and a few Brodit Car Holders. Not sure why I've stuck with them, but never had a bad experience with them, so why not. The best holder I had was for my iPhone, it had a Pass Through connector so I could plug any device in the bottom and play it through my Parrot Car Kit as it synced with the iTunes on the phone.
As the car kit has a USB device support on it, I'm wanting to get a Car Holder that has a pass through connector at the bottom so when the phone slides into the holder, it always plugs into a Micro USB part, but then I can plug any USB cable into the bottom of it.
Anyone had one of these or knows where I can get one from for the Desire?
Nobody had anything like this? Nobody looking for anything like this? Surely there are some people out there that have...
I couldn't find one either, ended up going for the active brodit. If your wanting the usb for music can you not make do with bluetooth streaming?
martuk said:
I couldn't find one either, ended up going for the active brodit. If your wanting the usb for music can you not make do with bluetooth streaming?
Click to expand...
Click to collapse
Yeah, its an option, but the usb part was good as it allowed me to flick through my albums and everything, like it was just playing an iPod.
Might get the passive holder and adapt it myself.
Or I guess if you get the active holder you can just cut off the charger plug and wire up a USB plug instead... so long as all the wires are there.
gw0udm said:
Or I guess if you get the active holder you can just cut off the charger plug and wire up a USB plug instead... so long as all the wires are there.
Click to expand...
Click to collapse
I think it only has two wires there though, for power. I used to love it when they made pass through kits with the old Nokia holders.
nevermind, found this one which will do for me, it looks similar to the Nexus One version, but obviously without the dock pins at the bottom...
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199788
I saw it's possible with some minor modding.
If so could you kindly share your experience\post pictures?
What do you do with the power cable? Just leave it dangling or is there a more elegant solution?
I'm trying to find the best car dock solution for my G2, even if it means doing some modding.
I use it in the car. To get it to work, simply unscrewed the frame and flip the usb connector around. Once plugged in, the phone fairly securely. It came with a car charger plug so I just use that to charge the phone while using GPS. To get the dock-feel, I use car-home's setting to auto-launch when connected to my car's bluetooth.
thanks!
a couple of more questions, if you may:
is it easy to guide the phone into the usb plug or does it take some work?
do you think it'll work with the slim rubber-feel case or is the plug flush with the bottom surface?
Vyath said:
thanks!
a couple of more questions, if you may:
is it easy to guide the phone into the usb plug or does it take some work?
do you think it'll work with the slim rubber-feel case or is the plug flush with the bottom surface?
Click to expand...
Click to collapse
It's easy once you get used to it, it's much easier if you slide the keyboard out before you mount it.
There is a piece that you can take out to adjust for extra thickness.
Hi!
I've been looking around here and there and can't seem to find it, so i figured it's time to ask the guru's
Has anyone found an active carholder for the DHD, which can be mounted either on the windscreen or on the upper side of the dashboard, so it can be used for navigating safely, without taking your eyes of the road?
Thanks!
search in ebay
icematrix said:
search in ebay
Click to expand...
Click to collapse
Has only given me passive holders so far, no active ones. Maybe i'm using the wrong search terms :/
http://cgi.ebay.it/Brodit-Active-Ho...s_PDAMounts&hash=item35aea18dda#ht_1382wt_982
You can buy the official HTC Car accessory from their website http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=205737
it's cheaper then the one on eBay
Aythamie said:
You can buy the official HTC Car accessory from their website http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=205737
it's cheaper then the one on eBay
Click to expand...
Click to collapse
Much more expensive from there.
I order brodit with clips for my 2 cars + move clip to allow moving the unit from one car to the other from here: http://www.dsldevelopments.com/
I placd my order an hour ago so, I cannot give feedback now.
Aythamie said:
You can buy the official HTC Car accessory from their website http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=205737
it's cheaper then the one on eBay
Click to expand...
Click to collapse
But this one is not active
What do you mean by active? That you can move it around, from car, or from its current spot?
Active holders means there is a jack to charge/sync your phone as it's sitting in the dock. This means it will usually have a jack to connect your charger to, or will already have the cables hardwired into it.
Passive holders mean they just hold onto you phone.
I'm also looking for one of these, except i need one that can fit a DHD with an Otterbox case around it
clay420 said:
Active holders means there is a jack to charge/sync your phone as it's sitting in the dock. This means it will usually have a jack to connect your charger to, or will already have the cables hardwired into it.
Passive holders mean they just hold onto you phone.
Click to expand...
Click to collapse
ah cheers for that
Does Brodit HTC-DHD active mount activate car panel?
Does the "active" bit also suggest that the 'car panel' app can also be automatically started when the DesireHD is docked ? I'm sure I've seen a setting somewhere within android that can allow this to happen. Does this mount qualify?
I am assuming some pins being pulled high/low etc in the MicroUSB connector when plugged in determine if its a car mount dock or not, so that normal chargers dont trigger the car-panel?
Edit : I've just sent of an email to: [email protected] and asked for clarification. Will advise here when I get an email back from them.
Cheers & Happy New year.
Edit : Response from brodit.se was that the cable does NOT activate the car panel.
Brodit HTC-DHD ... activate nothing at all..only charging :-(
avga said:
Brodit HTC-DHD ... activate nothing at all..only charging :-(
Click to expand...
Click to collapse
I think you will have to use an HTC car charger USB cable. The one that comes with S400 brings up the car panel (I use Google's Car Home though) even if it isn't connected to a power source. I think it is the pin config at the micro-usb end of the cable that does the trick.
I'm more than sure than this has been asked before, But I've already looked at the forum and I found so many different models of car holders and blue-tooths that I already don't know which one might be the best one.
I'm looking for something nice hopefully minimalistic in design.
I already have a car charger with a double USB connector port so I'm looking only for the car holder and a good blue tooth device...
Thanks in advance to everyone, I know how annoying can it be to see some one asking something that it might have been answered before, really thanks.
I Hv the genius HTC desire HD car charger set (free with my phone) , it hold the phone well , only down size is I need to remove the TPU case every time I use it ...
Sent from my Desire HD using XDA App
Do you have a link to look at it???
Thanks in advance
I use a brodit passive holder with the the specific pro clip for my car, just looks nice and part of the car. For Bluetooth I connect to the parrot add-on for my kenwood set, 1amp car charger I wired in myself. A bit of work but saves trailing cables over the dash.
The genuine brand HTC Desire HD holder is very capable and secure; Clicky You can use the cable with another 12v socket with USB output; Cable automatically activates the Car Panel, which is useful.
I have a Samsung WEP870 bluetooth headset; Comes with lanyard-equipped stereo headphones which you can plug in to the headset, giving you a solution for music too. Sound quality isn't great, but ok for a walk to the pub.
Thank you all I will take a look
do any of you have problems with the phone not being able to see the cable correct? sometimes mine on car dock see the cable as cable ion car sometimes as connect to pc and sometimes a charger, really weird
I got a universal 1 from Amazon, fits any size. Great purchase.
The Modern-Tech In-Car Dashboard Mount is also very handy to hold the phone on your car's dashboard. It's adhesive, you just have to set the phone on the mat and pull it off later. It's not so great for charging though.
Have you looked into HTC Desire HD Herbert Richter suction mounts?
Where can I look at those???
Here's the link.. Aesthetically, I love the way this particular one looks.
Hey guys,
i need some help / ideas for the best solution for my "docking"-problem in my car.
I have a bmw and since there are no snap-in adapters for htc i have to go over audiojack for listening music with spotify and i can't just put it to the place where the audiojack is because i have to control music with the touchscreen (iDrive 1 so no bt-audioplayback/control...).
Now i got 2 problems:
1. the cable looks ugly when its plugged in the phone and
2. i have no idea where to place my holder because every place i put the ugly holder the car looks cheapy.
So, my idea is to go over the pogo-pins!
Yeah pogo-pins but i don't know the assignment of the pins so the solution would be the cr s650 dock.
BUT! i think i my car won't be able to provide enough power through usb (is it possible to power the dock with usb?!).
The plan was to place the dock (please see the attachment) in the red circle and put the cable under the cover to the usb charger and the audiojack.
And also i have to modify the dock so i can plug in a jack into the dock or just solder a cable or whatever...
So my questions are, do you think this will work? And what problems i will have implementing this? Any other better ideas maybe?
Thanks for help and sorry for my bad english i think
No ideas?
Sorry if this post comes to early
Clake said:
No ideas?
Sorry if this post comes to early
Click to expand...
Click to collapse
I have no idea about the pogo pin dock, but I would avoid making any permanent modifications to a BMW and deal with the ugly look...it will decrease the resale value...you could always take the dock down when not in use (which is what I do)
Regarding the pogo dock, Make sure that the phone stays still and will not fall off the dock with some hard driving.
Not the prettiest solution, but I use this: http://www.amazon.com/Mountek-nGroo...1131802&sr=8-1&keywords=cd+player+phone+mount
and just hard wired a power cable behind the dash (as to not have wires all over coming from my cig lighter)
The reason I went for that dock is because the phone is a lot closer and more accessible vs mounted to the windshield or elsewhere...also, regarding your proposed placement: having it down by the gear shift while driving would be pretty disorienting to me using GPS