[HELP]seems bricked :(, or idduno please help :( - Samsung Galaxy SL i9003

i have a Samsung Galaxy sl ..
at no reason while im texting , the messeging force close ..
many times .. then the phone rebooted it self .i dnt know why ..
when suddenly , it its rebooting over and over again ..
then i tried on some thread the wipe all , factory reset at the recovery mode ..
all of that doesnt work..
and this day .. i tried on some sites says ..
flash and asian froyo first then the GB dxkp7..
i followed all of the instructions .. and at the odin
they both okay and pass ..
after that .. the phone start itself
and now it stucks at the samsung logo .. its blinking like hell..
now i dont know what to do .. please help guys ..

jedd07r said:
i have a Samsung Galaxy sl ..
at no reason while im texting , the messeging force close ..
many times .. then the phone rebooted it self .i dnt know why ..
when suddenly , it its rebooting over and over again ..
then i tried on some thread the wipe all , factory reset at the recovery mode ..
all of that doesnt work..
and this day .. i tried on some sites says ..
flash and asian froyo first then the GB dxkp7..
i followed all of the instructions .. and at the odin
they both okay and pass ..
after that .. the phone start itself
and now it stucks at the samsung logo .. its blinking like hell..
now i dont know what to do .. please help guys ..
Click to expand...
Click to collapse
RELAX..!!! take a deep breath...
hv a glass of cold water..
and now ur ready to go...
i want u to dwnload
xxkpe...firmware...
flash it...
after it flash any other gingerbread dxkp7 or xxkpq u want too...
for gingerbrd to work..u need xxkpe as a base..NOT FROYO...
so..
i hope u knw hw to use odin since u hv mentioned about odin in d op...
if not here is what u do..
1.Dwnload XXKPE..from stock roms thread...
and do this..all credits to kkrraazzyy
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
u hv an issue..free to ask...

okayyyy
ok ..
i downloaded xxkpe .. and i flashed it already..
do i need to download dxkp7 or xxkpq ?
coz i think nothing happen and change ..
-------------
but on the guide youve given , i open the odin , then put the cable first before opening the latona .. i think that is not an issue

jedd07r said:
ok ..
i downloaded xxkpe .. and i flashed it already..
do i need to download dxkp7 or xxkpq ?
coz i think nothing happen and change ..
-------------
but on the guide youve given , i open the odin , then put the cable first before opening the latona .. i think that is not an issue
Click to expand...
Click to collapse
not an issue...
xxkpq is the latest..with NO BUGS...and most stable..
or u cn try ddkp3 too...
Much better thn xxkpe..
if i helped hit thank you button..

:/
i follow all steps in guide ..
but i think there is p problem on this 2 in system recovery ..
i see them always, like after flashing it will proceed in recovery mode , right ..?
then i see this one
E:error in data/log/recovery/kernel_log.txt .. if im not mistaken thats a red text on my sys rec everytime i reboot my phone ..
and the other one is the
Cant access to '/system/csc/XTC/system/'.
i think this is the main problem of this ..

this what happen..
this the error i got .. even i flash any frimware .. i think the red text is the main problem..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

jedd07r said:
this the error i got .. even i flash any frimware .. i think the red text is the main problem..
View attachment 1025365
Click to expand...
Click to collapse
can u tell me wat u r tryng to do step by step pls...
if ur confused..
pls Start from the scratch... KPE...twice thn kpu..
if u still feel any problms..thn u can flash Froyo using ODIN..from stock roms threads..
th kpe..and thn..ur desired firmware..
i hope it works..
Pls verigy the froyo part m not sure about it.do some google..or XDA is the best pace...

okay ill try
okay i will do it ..
but do you think the red text will be remove after flashing those frimware..
?
or there is a option like ultimate super factory reset ? like that ..
coz when i go to boot into recovery i saw those files in my internal sd ..
so i think flashing frimware doesnt remove my old files ..
can i make a video for you to see what is happening to my phone and , my steps of flashing frim , maybe im doing it wrong ..
:|

jedd07r said:
okay i will do it ..
but do you think the red text will be remove after flashing those frimware..
?
or there is a option like ultimate super factory reset ? like that ..
coz when i go to boot into recovery i saw those files in my internal sd ..
so i think flashing frimware doesnt remove my old files ..
can i make a video for you to see what is happening to my phone and , my steps of flashing frim , maybe im doing it wrong ..
:|
Click to expand...
Click to collapse
dude...
format us usb storage aell as memory card...
TAKE PRIOR BACKUP..!
i hope it helps...
else service centr...
but if the phone is working without any issues y worry?

:|
sorry guys , but i did all my best but i ddnt fix my phone ..
i almost downloaded all frimwares at samfrimware but i nothing ..
thanks for time greekynoob ill hit the thanks button for you ..
*le me hopeless :|
maybe tom is the right time to go at samsung store :'( :'( :'(

jedd07r said:
sorry guys , but i did all my best but i ddnt fix my phone ..
i almost downloaded all frimwares at samfrimware but i nothing ..
thanks for time greekynoob ill hit the thanks button for you ..
*le me hopeless :|
maybe tom is the right time to go at samsung store :'( :'( :'(
Click to expand...
Click to collapse
tried my best brother...
flash to stock rom before going to samsung store..
else u knw...
umm..its geekynoob.. not greeky..

Related

my sgs2 gt-19100g wont start

Hi guys i need some help please i rooted my sgs2 gt-19100g using odin1.38 and its all work just fine but when i tried to install a rom for my devise the phone wont start on the recover mode neither downloading mode and i have an image shownc phone try to connect to pc and in the middle of the a yellow triangle
Moved to General Q&A.
DUDE u Bricked ur phone !!!
It seems u made some mistake while flashing ur ROM but dnt worry . IF u have any nanodroid backup restore it or else download any stable ROM for ur device u will find many on xda and jst get a good guide on how to flash a rom and every thing will b all right u will also need to replace ur stock recovery with CWM just search on xda "How to install CWM on ur model no "
HOPE this HELPS
PRESS THANKS PLZZ

[HELP] i bricked my Samsung Galaxy SL i9003

plz help anyone. i flashed my galaxy sl i9003 with galaxy Y firmware. my phone is bricked, no charging screen. no download mode, no recovery.
i did a stupid thing i know. but now is there any way to fix my phone?
ZAKTECH90 said:
plz help anyone. i flashed my galaxy sl i9003 with galaxy Y firmware. my phone is bricked, no charging screen. no download mode, no recovery.
i did a stupid thing i know. but now is there any way to fix my phone?
Click to expand...
Click to collapse
May be USB jig can help u to get ur phone into download mode then u can flash KPE or DDLF2 firmware with .pit file.
If u don't know abt USB jig then Google it.
If u want to borrow it from someone near ur place then check out this thread: http://forum.xda-developers.com/showthread.php?t=1869494
Good luck!
Sent from my GT-I9003
ZAKTECH90 said:
plz help anyone. i flashed my galaxy sl i9003 with galaxy Y firmware. my phone is bricked, no charging screen. no download mode, no recovery.
i did a stupid thing i know. but now is there any way to fix my phone?
Click to expand...
Click to collapse
if the phone boot is dead then wont go into download mode bro.
You can try to find out any nearby service guy who uses jtag...u can recover using that
Sad News
OMG Yesterday i go to market and gave a phone to a shop where they repair the phones. but in evening later they return the phone with same condition. and they said that it can't be repair. i don't know what they try Jtag or what. but now i'm thinking to give phone to Samsung service center
will they repair my phone ? i don't have warranty.
is this possible that a wrong software flash bricked phone will not be able to repair again? is the phone is junk now ?
plz..help me.
they wil ask u to change the pcb....
Have a look at http://forum.xda-developers.com/showthread.php?t=1869494
ZAKTECH90 said:
OMG Yesterday i go to market and gave a phone to a shop where they repair the phones. but in evening later they return the phone with same condition. and they said that it can't be repair. i don't know what they try Jtag or what. but now i'm thinking to give phone to Samsung service center
will they repair my phone ? i don't have warranty.
is this possible that a wrong software flash bricked phone will not be able to repair again? is the phone is junk now ?
plz..help me.
Click to expand...
Click to collapse
Try doing this;
http://forum.xda-developers.com/showthread.php?t=1411768
Good luck!
Sent from my GT-I9003
Please try this http://forum.xda-developers.com/showthread.php?t=1411768
This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !
not working
manojks256 said:
Please try this http://forum.xda-developers.com/showthread.php?t=1411768
This is for all those who have soft bricked their phone, if you are experiencing a bootloop or some other problem here is a detailed guide how to get your phone back to working condition. If your phone is not entering download mode or recovery mode and even if a USB jig is not possible or not working.... This is the guide for you-I do not know whether this will work in all situations but you could still try it if you have no other alternative. The Galaxy SL has a hard reset button between the camera lens and the speaker... DO AT YOUR OWN RISK!
1)Open the back over
2)Check between the Camera Lens and the speaker
3) There is a hard reset button which is a small cavity
4) You will need two people for this.. Keep that cavity pressed with a pin
5) Keeping it pressed use the download mode combo- Volume down + Home + Power pressed.
6)Wait and try it a couple of times and your phone will enter download mode
7)Flash to a stock firmware
Also thanks to sakindia123 for giving me a suggestion of making a thread on this ...
Hit the THANKS button if it helped you !
Click to expand...
Click to collapse
i try it it's also not working, my phone is hard brick i think.
There might be a good chance your battery is dead hence it's not entering download mode because it is not switching on at all. Take out your battery and connect the charger and then try the hard reset. If it works you know your battery is dead and all future download modes tillyou recharge the battery will have to be done with a usb cable while connected to the laptop. Try it.
maybe service center is the best option here.
Maybe A chance
Hi All, i try 2/3 mobile repairing shops but they can't fix my phone
today i try this on my PC
i pull out the battery then i connect to the pc with USB then i press and hold volume down button then i place the battery in.
my PC detect it with installing drivers but the it show that messag "OMAP3630 No Driver Found"
now my PC detect something... now is there any way to fix it ?
i hope yes. plz anyone know about that i have a screenshot of it plz see..
sorry for my bad english...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZAKTECH90 said:
Hi All, i try 2/3 mobile repairing shops but they can't fix my phone
today i try this on my PC
i pull out the battery then i connect to the pc with USB then i press and hold volume down button then i place the battery in.
my PC detect it with installing drivers but the it show that messag "OMAP3630 No Driver Found"
now my PC detect something... now is there any way to fix it ?
i hope yes. plz anyone know about that i have a screenshot of it plz see..
sorry for my bad english...
View attachment 2123318
Click to expand...
Click to collapse
Did u find any working method????????
i think u should press volumn down and power button then plug to the pc. open adin
Sent from my G1 using xda app-developers app

[ROM] Alcatel Onetouch Flash (6042D) Stock ROM

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alcatel Onetouch Flash (6042D) Stock ROM
Installation:
1) Download here 6042D_Stock_Backup.rar (768MB)
2) Extract ROM
3) Download SP Flash Tools
4) Power off your phone
5) Open SPFT and click on "Scatter-loading", now choose the scatter file in the ROM archive
6) Uncheck Preloader.bin
7) Click on Download button
8) Now plug in your device with USB. Download should start. Wait till it finishes flashing (5 to 10 minutes according to your computer speed).
9) Unplug the cable, go to recovery mode (volume down + power till you see alcatel logo); wipe data & factory reset; then wipe cache partition.
10) Now reboot.​
Troubleshooting:
- If your phone is booting and reboot (infinite loop) and so can't be powered off, just click on Download button and plug it in; SPFT will detect it when it turn off. It won't turn on when SPFT initiates the flashing proccess.
- If you're stuck on bootlogo or bootanimation (bootloop). Just click on download button in SPFT, then plug in your phone. Now press the power button for 10s (or less) till SPFT detects it. Now release the button, flashing should start.
Notes:
- NEVER flash with "Preloader.bin" checked ! Unless your device is already HARD BRICKED! (Tip: If you still can boot to recovery, then your device isn't hard bricked. It's just soft bricked)
- You need MTK VCOM USB Drivers installed first! You can find plenty of tutorial on Google to do that
Thank you
in my 6042D.. i go to TWRP--->Wipe---> Formet data.. now in my phone only boot logo displays...
Now can i do....???
thank you very much dude.. god bless you
flashes successfully but phone wont turn on
My phone(6042d) gets flashed successfully each time and also passes memory test but the phone wont turn on. it is detectable by sp flash tools so i guess its not hard bricked but wat might be the issue?plz help me...
Prashanthz said:
My phone(6042d) gets flashed successfully each time and also passes memory test but the phone wont turn on. it is detectable by sp flash tools so i guess its not hard bricked but wat might be the issue?plz help me...
Click to expand...
Click to collapse
Can you see Alcatel Logo ?
Nonta72 said:
Can you see Alcatel Logo ?
Click to expand...
Click to collapse
no.. just plain blank.. no vibration nothing..
Prashanthz said:
no.. just plain blank.. no vibration nothing..
Click to expand...
Click to collapse
Flash the rom without preloader
Does this rom is stock or backup of any device.
Sir, i want to know one thing that this rom is stock (direct from manufacturer) or you backup it from any device. Please answer this ASAP.
GreatSingh said:
Sir, i want to know one thing that this rom is stock (direct from manufacturer) or you backup it from any device. Please answer this ASAP.
Click to expand...
Click to collapse
Good question...
It's Backup of my device.
Manufacturer didn't provide a stock rom because Alcatel guys are LAZY :laugh:
works but no imei
after many attempts it started but i dont have the imei yet, what should i do now?
Prashanthz said:
after many attempts it started but i dont have the imei yet, what should i do now?
Click to expand...
Click to collapse
Reflash stock rom again. It's the only way to restore your IMEI. Or use MTK Droid Tools to restore your IMEI if you previously made a backup.
solved.. thank you..
Nonta72 said:
Reflash stock rom again. It's the only way to restore your IMEI. Or use MTK Droid Tools to restore your IMEI if you previously made a backup.
Click to expand...
Click to collapse
Since i know my imei's i tried to apply it using Chamelephon app from playstore and it fixed the imei problem.
Thank you bro for the stock rom with root.i dint had to root.. :good::good:
Prashanthz said:
Since i know my imei's i tried to apply it using Chamelephon app from playstore and it fixed the imei problem.
Thank you bro for the stock rom with root.i dint had to root.. :good::good:
Click to expand...
Click to collapse
You don't need to write "Thanks".
Just click on the "Thanks" button under posts.
I could have a video of how to thank you
if anyone have problem in downloading from mega can use this mirror i created
https://drive.google.com/open?id=0B1mvphK9i_ZkYmVpWEdsa2M4V1k
* proper credits given in rar title *
-TechExhibeo
I can't find general discussion, development or apps and original development for alcatel one touch flash plus.
does anyone know the link?
TechExhibeo said:
if anyone have problem in downloading from mega can use this mirror i created
https://drive.google.com/open?id=0B1mvphK9i_ZkYmVpWEdsa2M4V1k
* proper credits given in rar title *
-TechExhibeo
Click to expand...
Click to collapse
Thank you buddy.
meliacentrum said:
I can't find general discussion, development or apps and original development for alcatel one touch flash plus.
does anyone know the link?
Click to expand...
Click to collapse
There isn't one.
Error
I'm getting an error that says: "initializing scatter file failed. Please check the name of scatter file which you load is legal." Please help.
Hi ,I am stuck off in flashing my alcatel 6042d ,actually i have done all the steps you mentioned above but by doing these steps when i switched On my phone it doesn't have any access to network also my bluetooth is not working and i also checked my IMEI and it is showing that IMEI not found.
Help me PLz

[Tutorial] No OS installed are you sure you want to reboot ? Here is the FIX !

Hello everyone , a lot of users end up sometimes with this error while flashing a custom rom or wiping partitions on recovery. Almost all of us use TWRP , you will get this error while trying to reboot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what to do ? Is my phone dead ? No there is always a solution. First , if you have a backup of your rom you have no problem , don't continue reading this guide , i will just waste your time . Second, if you already have a custom rom on your external sd card then you can flash it and your issue is gone. But what about Nexus users ? Galaxy S6 ? And all phones with no sd card slot , in this case adb is the solution.
Warning , before you follow those steps remember you should have TWRP OR CWM already installed. :
1. Download adb drivers ( you should download the last version of adb , previous versions won't work ).
2. Download fastboot
http://downloadandroidrom.com/file/tools/fastboot.zip
3. Extract it , you should get a fastboot folder with all files needed.
4. Now , download a custom rom , for exemple last CM13 nightly and put it in fastboot folder , you can add gapps too.
5. Plug your phone into your computer , your drivers should be installed. You will get your device recognized like that : ( look down in attached files )
6. Now go to fastboot folder and open command. ( Shift + right )
7. Type this : cd Downloads
cd fastboot
adb devices
8. You should get some numbers followed by recovery like that : ( look down again )
9. Now you are almost there
10. Type this :
adb push filename /sdcard/.
Replace the filename by the name of your rom zip !!!
11. Wait for it , it's copying files to your internal storage.
12. Done ! Now all you have to do is unplug your phone and flash your rom via recovery.
I hope this tutorial was helpful and saved you !
Mods i don't know of it's the right forum for this tutorial as it can be applied for a lot of devices , if not you can move it to the proper place , thank you
No feedback ?
Sent from my SM-T116 using XDA Free mobile app
Soufiansky said:
No feedback ?
Sent from my SM-T116 using XDA Free mobile app
Click to expand...
Click to collapse
It need a opportunity to let us try this, but I don't want I get this opportunity.
127cwho said:
It need a opportunity to let us try this, but I don't want I get this opportunity.
Click to expand...
Click to collapse
Lol but you know if you ever face this issue here is the fix
I know this is old, but what rom should I get for the huawei p9 lite. cm is dead, and the new one doesn't support the p9 lite.
I bought my phone online, and it wouldn't access the google play store. So I'm doing this to try to fix that, though I'm not tech savy, and I accidentally wiped system(oops).
Any help please?
---------- Post added at 05:55 AM ---------- Previous post was at 05:16 AM ----------
When you say go to the fastboot folder and open command, what do I open?
NEED HELP
Soufiansky said:
Hello everyone , a lot of users end up sometimes with this error while flashing a custom rom or wiping partitions on recovery. Almost all of us use TWRP , you will get this error while trying to reboot :
So what to do ? Is my phone dead ? No there is always a solution. First , if you have a backup of your rom you have no problem , don't continue reading this guide , i will just waste your time . Second, if you already have a custom rom on your external sd card then you can flash it and your issue is gone. But what about Nexus users ? Galaxy S6 ? And all phones with no sd card slot , in this case adb is the solution.
Warning , before you follow those steps remember you should have TWRP OR CWM already installed. :
1. Download adb drivers ( you should download the last version of adb , previous versions won't work ).
2. Download fastboot
http://downloadandroidrom.com/file/tools/fastboot.zip
3. Extract it , you should get a fastboot folder with all files needed.
4. Now , download a custom rom , for exemple last CM13 nightly and put it in fastboot folder , you can add gapps too.
5. Plug your phone into your computer , your drivers should be installed. You will get your device recognized like that : ( look down in attached files )
6. Now go to fastboot folder and open command. ( Shift + right )
7. Type this : cd Downloads
cd fastboot
adb devices
8. You should get some numbers followed by recovery like that : ( look down again )
9. Now you are almost there
10. Type this :
adb push filename /sdcard/.
Replace the filename by the name of your rom zip !!!
11. Wait for it , it's copying files to your internal storage.
12. Done ! Now all you have to do is unplug your phone and flash your rom via recovery.
I hope this tutorial was helpful and saved you !
Click to expand...
Click to collapse
Hi man,
I'm so glad I found the issue I was facing, I have a S6 G920F and I accidentally deleted the OS and now its giving that error in TWRP. Ok, I'm a total noob, I know so I need further hep with a couple of things.
1) What are adb drivers? Like what do they do? and could you send a link for the latest version ?
2) Which custom ROM should I download for this model? (This is what I desperately need, I have no idea where to get the right custom ROM). Please send a link for it too......
I know I'm super annoying but I'll be eternally grateful if you help me fix my phone, life sucks without it xD
Thanks
I'm in big problem please help me
I got "no os installed " are you sure you wish reboot"
Then with a stupid way I click on and swiped on "are you sure.." then I can't do anything please give a piece of advice please I want that problem will be solved by your help please give me an answer guys:crying::crying: I'm using s6 edge
pro mob said:
I got "no os installed " are you sure you wish reboot"
Then with a stupid way I click on and swiped on "are you sure.." then I can't do anything please give a piece of advice please I want that problem will be solved by your help please give me an answer guys:crying::crying: I'm using s6 edge
Click to expand...
Click to collapse
Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:
UziDerulo77 said:
Hi man,
I'm so glad I found the issue I was facing, I have a S6 G920F and I accidentally deleted the OS and now its giving that error in TWRP. Ok, I'm a total noob, I know so I need further hep with a couple of things.
1) What are adb drivers? Like what do they do? and could you send a link for the latest version ?
2) Which custom ROM should I download for this model? (This is what I desperately need, I have no idea where to get the right custom ROM). Please send a link for it too......
I know I'm super annoying but I'll be eternally grateful if you help me fix my phone, life sucks without it xD
Thanks
Click to expand...
Click to collapse
I am very sorry for this late answer, i didnt saw your post until today, did you fix your issue ?
Soufiansky said:
Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:
Click to expand...
Click to collapse
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
---------- Post added at 03:07 PM ---------- Previous post was at 03:03 PM ----------
pro mob said:
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
Click to expand...
Click to collapse
I got now the image of the empty battery and that's all
pro mob said:
Soufiansky help me please I didn't use my s6 edge for more 1 month when I swiped on "are you sure you wish to reboot" and after that the phone show me the starting page Samsung galaxy s6 edge powered by Android " just the screen stayed like that till the battery ends 0 percent and after a month and few days I put my s6 in the charge and there is this screen now I put him around 1.5 hour in charge and there's always that screen please help me I'm in a big problem and I will be so happy with any answer and thank you very much please don't let me face this problem in my own and in the s6 the is no sd card port
---------- Post added at 03:07 PM ---------- Previous post was at 03:03 PM ----------
I got now the image of the empty battery and that's all
Click to expand...
Click to collapse
Sure sure i will help you.
-First download Odin on your PC , its a program to flash firmwares
-Second, search on google for "Samsung Drivers" and install them
-Third, Now go to sammobile website, write your phone model ( i suppose its G920F ) , go to region and choose whatever you like, i suggest you XEF ( France ) or DBT ( Germany ), download the file and unzip it, you will get a .tar file
-Fourth, charge the phone to 100%
-Fifth, now open odin, boot your S6 after being charged to download mode ( Hold Power button + Home + volume down ), you will get a black screen with info click on volume up, you will get a green screen with "Downloading" written in the middle
-Sixth, plug it on your PC, wait for like 2min you SHOULD get a blue BOX in odin and "Added" written down left
-Seventh, put the firmware you downloaded in AP, the .tar file, its +3GB
-Eighth, now wait for it to check md5, when its over click on start and wait. It should take 4 to 12 minutes, then all good your phone will reboots for itself.
-Nineth, I suggest you to do a factory reset after the phone booted, you turn off your S6, boot in recovery and factory reset then Reboot ( All data will be erased ! )
- 10, your S6 is back to life mate
Follow this instructions carefully, it will 100% work. If you need anything else i'm here to help you, dont freakout or something the issue is normal and will be easily fixed !
Soufiansky fiansky;72642877]Download the last firmware for your device and flash it via odin, and if you already have a custom ROM in your sdcard just reboot in recovery and flash it :good:[/QUOTE]
Soufiansky I swiped on " are you sure you wish to reboot " one month ago then I had the starting screen "Samsung galaxy s6 edge powered by Android" and then it didn't to move on and the situation continued till the battery got 0 percent and now when I put my s6 in the charger after a month of not using it it show me the screen of the empty battery and in that situation i charged my phone for 1 hour and 14 mn and i cant do anything even with bottons so whats the solution please? Did s6 need more time to charge please im in a big problm help me please and the there is no sd card in s6 edge please im very scared if there is a problem in the motherboard please give me an answer I will be very happy
---------- Post added at 04:17 PM ---------- Previous post was at 03:36 PM ----------
Soufiansky said:
Sure sure i will help you.
-First download Odin on your PC , its a program to flash firmwares
-Second, search on google for "Samsung Drivers" and install them
-Third, Now go to sammobile website, write your phone model ( i suppose its G920F ) , go to region and choose whatever you like, i suggest you XEF ( France ) or DBT ( Germany ), download the file and unzip it, you will get a .tar file
-Fourth, charge the phone to 100%
-Fifth, now open odin, boot your S6 after being charged to download mode ( Hold Power button + Home + volume down ), you will get a black screen with info click on volume up, you will get a green screen with "Downloading" written in the middle
-Sixth, plug it on your PC, wait for like 2min you SHOULD get a blue BOX in odin and "Added" written down left
-Seventh, put the firmware you downloaded in AP, the .tar file, its +3GB
-Eighth, now wait for it to check md5, when its over click on start and wait. It should take 4 to 12 minutes, then all good your phone will reboots for itself.
-Nineth, I suggest you to do a factory reset after the phone booted, you turn off your S6, boot in recovery and factory reset then Reboot ( All data will be erased ! )
- 10, your S6 is back to life mate
Follow this instructions carefully, it will 100% work. If you need anything else i'm here to help you, dont freakout or something the issue is normal and will be easily fixed !
Click to expand...
Click to collapse
Thanks I hope that the screen of the empty battery disappear and I hope my motherboard is ok
No no its not the motherboard, look let it completely discharge then charge it, let it for like 2h it will charge, your problem is software related not hardware
What the hell!
Soufiansky said:
Mods i don't know of it's the right forum for this tutorial as it can be applied for a lot of devices , if not you can move it to the proper place , thank you
Click to expand...
Click to collapse
hmm..
sisi1792 said:
hmm..
Click to expand...
Click to collapse
What ?
Soufiansky said:
No no its not the motherboard, look let it completely discharge then charge it, let it for like 2h it will charge, your problem is software related not hardware
Click to expand...
Click to collapse
Hi Soufiansky my s6 is back thanks to you and sorry for the late answer but when I want to install the twrp mode with odin the phone can't reboot please help this time please and I could boot into download mode and twrp mode but the s6 can't reboot always the screen s6 edge powered by Android and then the same screen what can I do please don't let me alone
pro mob said:
Hi Soufiansky my s6 is back thanks to you and sorry for the late answer but when I want to install the twrp mode with odin the phone can't reboot please help this time please and I could boot into download mode and twrp mode but the s6 can't reboot always the screen s6 edge powered by Android and then the same screen what can I do please don't let me alone
Click to expand...
Click to collapse
No problem happy it worked for you mate. For twrp, go to twrp website and download last twrp.tar file, put it in odin then reboot in download mode, plug your phone and wait to that blue box as i told you last time, then press start, wait for like 1 min and enjoy. Be sure you download a .tar file for G920F and put it in AP section, thats all it will definitely work
Soufiansky said:
No problem happy it worked for you mate. For twrp, go to twrp website and download last twrp.tar file, put it in odin then reboot in download mode, plug your phone and wait to that blue box as i told you last time, then press start, wait for like 1 min and enjoy. Be sure you download a .tar file for G920F and put it in AP section, thats all it will definitely work
Click to expand...
Click to collapse
I did it and I downloaded the latest version of twrp 3.1.1.0 if. tar and it didn't work on my s6 edge so can you send me may be the right version if not is it a solution to download the firmware as we did before
if you have please a solution via twrp because it works but not the s6 edge help me and I'm on windows xp 32bits
pro mob said:
I did it and I downloaded the latest version of twrp 3.1.1.0 if. tar and it didn't work on my s6 edge so can you send me may be the right version if not is it a solution to download the firmware as we did before
if you have please a solution via twrp because it works but not the s6 edge help me and I'm on windows xp 32bits
Click to expand...
Click to collapse
Oh you have the edge variant, take here is the link :
https://dl.twrp.me/zerolte/
Take the last one ( 3.1...) its a .tar file and put it in AP section then reboot in download mode and flash

Need a help to fix my sm-j500h/ds

please help me to fix my phone . i can't open the bootloader of my SM-J500H/DS .how can i fix this? when i turn it on, there are colored yellow words written at the upper right, ( set warranty bit : recovery ) , after that, after how many it turns of back .. what will i do please help me . THANK YOU
Bro u need to flash your phone.. Dl a stock rom for ur phone and flash it using odin..

Categories

Resources