Related
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Anyone know where I can get a replacement LCD glass for my Desire HD
I believe it's just the glass as the screen seems to still work.
If there's a place in or around London that can replace it for me even better, if not anyone know how difficult it is to replace.
I've noticed a few places on Ebay (China/HK) selling digitizers and complete LCD's but ideally I want somewhere in the UK.
thanks
Elliot
Hi,
I went through a similar experience less than 2 weeks ago, you can even see images here: http://forum.xda-developers.com/showthread.php?t=834335
I rang around several places, none could commit to using GENUINE HTC parts. The only people I found were: www.htcrepairs.co.uk/ - and they even offer a walk in service whereas I found most others did not.
Unfortunately they don't have the parts I require in stock, maybe you can try them.
At the moment, they're the only people I've found in the London area that I'd be willing to give my phone in to...
Did you have any luck with finding anyone else?
Maybe contacting HTC? They can probably repair it for you but it can be pretty expensive though.
Maybe you got some pics?
You could try, as said above, get the glass/screen from eBay.
Repaired my SE K800i with it, where the glass could easily be removed and the new one could be installed within 5minutes.
Don't know how the HTC will disassemble though.
I'm going to try this place on the way home from work: http://www.spsmobile.co.uk I'll let you know how they go. They've got the parts and will charge me £60 for either the lcd or digitzer including fitting.
Here's some pictures. I think they'll get away with just fixing the glass, although it looks bad the lcd still seems to work ok.
Can anyone recommend a case surround?
earazi said:
I'm going to try this place on the way home from work: http://www.spsmobile.co.uk I'll let you know how they go. They've got the parts and will charge me £60 for either the lcd or digitzer including fitting.
Click to expand...
Click to collapse
How did it go?
Did they fix it whilst you wait, or retain the device to work on for a day or two?
More importantly, are they using genuine HTC parts ?
They fix while you wait, they're near Staples Corner (which is a bit of a walk from the tube at Brent Cross).
I need to go back tonight as they messed up and thought I had a Desire and not a HD, they're hoping to get the HD part in today, they're charging me the Desire price.
According to their website they use official parts, but who knows.
Warranty
* We give 3 months warranty on every repair excluding liquid / water damage and physical damage
* Every warranty handset is security sealed. Tampering with the security seal will void the warranty LCD / SCREEN warranty. We fit original screens only and they are security labeled
* Every handset is tested for 24 hours and comes with engineers report
I plan to visit these SPS guys tonight. Lets hope they manage to fix my phone.
I'm hoping to wait around so I can ensure genuine parts are used...
SPS didn't manage to get a Desire HD digitizer for me, they've got 1 on order. They're a little difficult to find (at least they were in the dark) they're behind Staples industrial state, in room 207, small little office. They seemed ok though they.
earazi said:
SPS didn't manage to get a Desire HD digitizer for me, they've got 1 on order. They're a little difficult to find (at least they were in the dark) they're behind Staples industrial state, in room 207, small little office. They seemed ok though they.
Click to expand...
Click to collapse
I posted my feedback in another thread:
c_man said:
I'm back!
Got my Legend fixed earlier this evening by these guys: http://www.spsmobile.co.uk/
They were one of few who were adament they use genuine parts [they allowed me to inspect the parts before installation] AND allowed me to wait whilst they work on it.
Abolutely disgusting/poor customer service and general attitute towards their customers... though the main thing is my Legend is all well again !
Oh, it cost £70 for display + digitizer + installation.
Click to expand...
Click to collapse
c_man said:
I posted my feedback in another thread:
Click to expand...
Click to collapse
In which one?
f.
forelli said:
In which one?
f.
Click to expand...
Click to collapse
Well, I pasted my feedback above? ...but this thread: http://forum.xda-developers.com/showthread.php?t=834335
im terrified of dropping my phone. i dont take it out unless im sat down and have both hands free. eek!
Hey guys, any idea if the back plate is replaceable yet?
HTC Desire HD Broken Digitizer
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
ingeps1 said:
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
Click to expand...
Click to collapse
i would NOT attempt this yourself unless you are HIGHLY skilled and HIGHLY experienced with repairing gadgets
ingeps1 said:
I broke my HTC DHD touch a few weeks ago, I order a new digitizer in Ebay an I just got it, but I do not see anywhere a video on how to replace the screen can anyone help me with this.
Click to expand...
Click to collapse
U didn`t look for it enough Check this thread: http://forum.xda-developers.com/showthread.php?t=883444
Thanks but I do not see a complete teardown guide yet. Looks like the guys on the other thread are working on it but nothing detailed enough. I need to know how to replace the digitizer, looks like not body knows how to do it yet.
Okay strait to the point! I've got a Galaxy S2 with Android 4.0.3 bought it 4 months ago.
I accidently dropped my phone and cracked my screen on the bottom right corner. The crack went from bottom and a diagonal line up til the right side. I took a picture below.
imageshack(.)us/photo/my-images/685/20120326152703.jpg
This happened about 2 months ago. No problem since. I dropped the phone a few times afterward but it didnt seem to affect it lucky me.
Yesterday i tried watch some series over my WIFI and the phone got really hot around the camera area. The phone wasn't acting well either and then battery dropped from 75% til about 10% in 10 minutes without any video still showing up. (Never had that problem before). I stopped using it and instead put it on recharge for the next day. And today on the morning it was still okay. Went to school and back with the mobile still working. Put it on my table and checked my PC.
About 2 hours later while cheking up on my galaxy i discovered this.
imageshack(.)us/photo/my-images/198/20120326153629.jpg
I think that the LCD finally busted but i need to be sure if it has something to do with the previous crack and also if you could provide any info about what to do with it? Does my warrenty cover this? Or do i need extra insuranse?
I really need help right now LCD blackned spots
The screen has started to turn black from the core of the LCD leak. I now really think this is a broken LCD screen and not a software problem. If someone knows what i could do to fix this i really could need the help right now.
Someone correct me if I'm wrong,
But it sounds to me like you've busted the digitizer portion of your device. As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi). At any rate, judging from the second picture you provided us it most definitely looks like you damaged the digitizer.
Most companies don't really cover damaged screens caused by users. However, being that your S2 is only 4 months old you could possibly pass it as "it did it by itself, I don't know what happen". Worth a shot I guess...
If all fails you could bring it to a electronics repair shop or you can repair it yourself via a digitizer part bought on ebay(probably pretty expensive being that its part of the screen)
If all else fails check ebay for a new screen.
cbr69er said:
If all else fails check ebay for a new screen.
Click to expand...
Click to collapse
http://www.ebay.com/itm/Full-LCD-Di...ltDomain_0&hash=item27c3101beb#ht_1618wt_1185
If your thinking about taking the DIY road I found a screen for you.Quick note about buying something overseas on eBay: it usually takes awhile for the part to ship and even when you get it, the part may not be functional. But don't fret, eBay is usually pretty good about stuff like this so a working part will be guaranteed or your money back!
If you do decide to repair it yourself I would first research A LOT about your phone. Especially, the disassembly guide! Try to use only credible guides such as iFixit, repair universe etc.
This only applies to flex ribbon cables:
when replacing screens sometimes you have to plug it in a few times before you actually get it to respond(could be cause by oxidation of the pins) if thats the case, you could try to take a #2 pencil eraser and gently rub against the pins and remove the oxidation...
Good Luck!
Please let me know how it goes!
rhodium9 said:
As to it being caused by the small crack on your screen.. i don't really know(can't really see if it's a crack in the glass or digi).
Click to expand...
Click to collapse
Yes it is really a crack and a very annoying one. It doesn't cause any problems with the touch-function, so I've been using it normally but for the screen, it has gone completely black but for the top right part still a little darkblue. I think I'm going with your first answer and try to check it in on warranty have had a bit luck with it past couple of times but im not sure about changing it myself. If having no luck with warranty then maybe ill try doing it myself.
at any rate weather you get warranty to change it or you fix it yourself maybe youll learn to be more careful and get a case maybe???
Hey All, Trying to help a coworker of mine. She dropped her phone the other day, and her screen now looks like this.
(PIC is in attachment)
Would something like this be the result of a damaged screen, or a contact that came loose in the phone. And would you even bother fixing this?
Thanks!
If the Device is Un-Rooted, and she has T.E.P. I would suggest taking it in to Sprint. It's the easiest way. That does look like a Hardware issue. It could be any of several things. I suppose you've already tried a Reboot ? If that didn't resolve it, and it's Un-Rooted take it into Sprint.
Sadly, no TEP.
Yeah, it's been rebooted many times. I took it apart even, to make sure all the connections looked good. Still got this issue.
You could try and find a cheap screen for it (amazon) and replace it
sent from a nuclear explosion
swolltitan said:
Sadly, no TEP.
Yeah, it's been rebooted many times. I took it apart even, to make sure all the connections looked good. Still got this issue.
Click to expand...
Click to collapse
UGH . No T.E.P is not what you wanna hear. Unless your willing to take it all the way apart and replace the Digitizer assembly. The reason I say assembly, and not just the Screen is because of the way the sceen appears to be acting. It will be a safer bet to replace it as an assembly instead of just the LCD Screen. It will also be slightly easier. It is not an entirely difficult job. You just have to be very, very careful, and take your time. Wear latex Rubber Gloves, and work in as clean an environment as you can get. I like to work late at night when no one is awake. If you do decide to do it there are Videos I can link you to, or you can Google them. Your other option is to take it to a Cell Phone repair shop. Usually for a reputable place your looking at between $60 - $100 for a LCD / Digitizer replacement.
I picked up a used LG G2 from Ebay. The phone is in somewhat great shape and is functional except for the top portion of the digitizer. About an inch, give or take, at the top is unresponsive to touch. I just wanted some input on how common digitizer damage is on this phone. I know most phones these days are very delicate and the digitizers and LCD's can be damaged quite easily. There is a good knick at the top of the phone so I am guessing it had been dropped at one point.
I paid $150 for the phone and I can pick up the LCD, digitizer, and mid body assembly for $65 on Ebay. Just have to slap the internals in the new mid body, throw the back cover on, and done. Phone is good as new. But I don't want to make that investment IF by some chance the problem isn't the digitizer but rather something wonky with the main board. The more input the better. Thanks guys.
It's the digitizer, I sent mine in for the same thing.. Dunno how much it cost tho cause I had warranty. Hope it goes well replacing it
Sent from my LG-D800 using XDA Free mobile app
Thanks MaestriFC. While I was waiting on a response for this, I noticed the phone decide to go quirky on me. I looked it up and found on XDA this is a common problem? Phantom touches, etc.? I seen a couple people say it is still the LCD and digitizer causing these issues and replacing them fixed it.
Well I dropped my phone on tile with no case so I don't think it's a common issue (unless everyone is dropping them) but from what I read the digitizer was loose so you would have to open the phone and connect it, or get it serviced, I don't remember getting Phantom touches though..
Sent from my LG-D800 using XDA Free mobile app
Yeah. I read on another forum about it and found links to these problems here on XDA. Apparently, this phone going spaztic is a very common thing. Which still hasn't been traced down to any one specific thing. Most are having LG replace their phones just to get another one doing the very same things. I am going to order the new LCD and digitizer though. Hopefully it fixes the issues. Maybe LG got a batch of faulty digitizers or something....lol...here's to hoping.
Make sure you do your research on replacing haha wouldn't want anything else messed up... In my opinion you should just try to connect it properly and see if that works, that's if you're going to open it anyways of course, could save some money.. Good luck :thumbup:
Sent from my LG-D800 using XDA Free mobile app
I tried that. I opened it up, and from what I could tell the phone has never been opened. The screws were tight and came out with some black stuff on the threads. That's USUALLY a sign the phone has never been opened. I reseated the top and bottom connectors for the digitizer. The one on top and the one on bottom, I didn't reseat the other one at the bottom though. But I figured that one was for the bottom portion of the digitizer anyway. Which is working. When the phone starts up, every now and again, the "LG" screen will just flicker then boot up. But most times the "LG" screen shows as normal when booting up.
I did also find out from normal calling that the microphone for speaker phone isn't working properly. Normal headset works just fine. But when I switch it to speaker phone people can barely hear me. But that microphone costs like 8 bucks to change so no big deal. I have checked out many youtube vids on fixing this phone. It can be challenging to have to remove everything but I have found just buying the LCD and digitizer already mounted to a new mid body is the easiest way to go.
So the repeating the digitizer didn't work? I would buy the two together as it would be a lot easier than separating the two.. Might just be you had a faulty one after all
Sent from my LG-D800 using XDA Free mobile app
I haven't replaced it yet MaestriFC. I will report back in a couple weeks though when I do get the new screen in and get it all replaced. What didn't work was opening her up and re seating the cables. I thought maybe something could have been or come loose but that wasn't the case.
Just an update guys. I got the whole LCD and Digitizer replaced last night. It's only been a few hours but so far everything is great. No more glitching out. As a matter of fact, I had no choice but power the phone down last week. That's how bad the glitching out got. My phone was totally unusable. But now with the new screen, it's working great. If it stays working great then we can assume the problems with this phone are the cause of bad digitizers.